Navigation block with tab page canvas

Hi,
With content canvas, we can navigate to the next block with CRTL/PgDown, With tab canvas if i press CRTL/PgDown, i go directly to the next tab page!! Any solution to avoid this?
Thanks.
null

Key-Up & Key-down triggers did not fire??

Similar Messages

Canvas with tab page

i have a content canvas(blockA) with 2 tab pages(tab1 and tab2) on it. each tab has its own block (blockB and blockC, but they are not master-detail, they are populated by cursor). on the content canvas, i have a column such as DEPT. when i key up or key down the dept column,how can i re-populate all items on tab2? I wrote a 'when tag change'trigger. but when i am current on tab2, and i key up/down to change the deptno, how can i refresh the data on tab2 which are associated by deptno?
thanks

Key-Up & Key-down triggers did not fire??

Detail blocks with TAB canvas

I have master detail block but i want detail block on tab canvas how can i achieve it?
Khurram

create on the main window (with a content canvas) a
tab canvas.Thanx gerd i did the same and diffrent detail blocks on diffrent tab canvases,but problem is that the moment i enlarge the tab canvas at design time and execute the form the tab canvase is invisible why?
Khurram

Tab page canvas problem

hi
i have a tab page canvaz in my form
width of my canvaz is very big
i set horizontal scroll bar for my window and for my datablock
but in runtime the horizontal scroll bar does not work.
but if my canvaz be a content it works well.
please help me.
thanks.

Hi Soofi !
Changing block order in the called form does not affect the navigation between tab pages.
Note in my question that the resulting undesired navigation is to and from the calling form ( which only has one block ).
Navigation between items and blocks works as expected.
To reiterate -
     The only navigation that fails is when I attempt to CTRL+TAB or CTRL+SHIFT+TAB to another tab page from within an item on a stacked canvas.
     Attempting this navigation results in moving the cursor focus to the calling form.
     Repeating the attempt from the calling form moves back to the called form.
     None of your methods mention navigation between forms .
Thanks for your interest.

Navigating to a tab page after a show_window() in on-commit trigger

I have a multi-tab form. On-commit, the form checks for warnings. When there is one or more warnings it opens a window to list them. With or without warning messages, the data is committed with commit_form.
Whenever window with warning messages is displayed, the form always returns to the top-most tab. Otherwise tab page is not changed.
In the on-commit trigger I save the tab page and then call set_canvas_property() after show_window() to restore the tab page. For some reason, the first tab page is always on top even though the the tab page name I saved is correct. I can't use go_block() in the on-commit trigger.
Are there other ways to restore a tab page on-commit?

Hi claytonfan
Are there other ways to restore a tab page on-commit? Try the following code in the WHEN-TAB-PAGE-CHANGED OR On-commit trigger.
   IF GET_CANVAS_PROPERTY('tab_canvas_name', TOPMOST_TAB_PAGE) = 'first_tab_name' THEN
GO_BLOCK('BLOCK_NAME');
      --write ur code--
   ELSIF GET_CANVAS_PROPERTY('tab_canvas_name', TOPMOST_TAB_PAGE) = 'second_tab_name' THEN
    --write ur code--
   END IF;Hope this helps...
Regards,
Amatu Allah

Organizational Management- Dealing with tab pages

Hello Experts,
I need to include tab page for account assignment to be displayed for object type P "Person". I've used view T77OCTABUS in order to include this tab page, the following record was created.
Scenario: OME0
Object type: P
Tab page: ACCNTNG
Sequence: 15
Program Name:SAPLRHOMDETAIL_APPL
Screen Number: 0504
FM for icons: HRFPM_ADT_FRAMEWORK_TABS
But the problem is only the part of cost assignment is shown without showing the part of validity dates on the screen. And when checking the technical information for the field of start and end dates, different program name and screen number is shown and when changing the previous record with the new program name and screen number, only the start and end dates are shown.
Please Help me on this issue so that both the validity dates and the part of cost assignment is shown.
Your help would be highly appreciated.
Regards,

Hi..Sally Ahmad Mahmud
please would explain me the actual scenario..why you need to configure this..?
Bashir Ahmadani

IView from second level navigation merged with Other page

Hi All,
I encountered a typical problem with iViews.
I have second level navigation with links as AAA,BBB,CCC (work sets) added to the Role-1.
CCC is a work set which is been added with pages CCC-1,CCC-2,CCC-3. (CCC-1,CCC-2,CCC-3 are also added to detailed level navigation).
Now on clicking of CCC (second level navigation link), I have page displaying with CCC-1 (which is working as desired).
Now I have page DDD wh.ich is directly to the Role-1. Hence now second level navigation is displaying as AAA,BBB,CCC,DDD on clicking on Role -1 .
Now when I click on CCC, while displaying the contents of CCC-1, DDD (page) is also displaying beneath of the CCC-1.
I don't want this DDD merging with CCC-1.
Can any one help me, how to resolve this issue.
Thanks in Advance,
Chinna.

Hi,
Just a thought : you could create a new workset and put DDD in it and see if that helps.
Regards,
Pierre

EL for a specific page in a Navigation Model with a Pages Query

In WebCenter Portal: Spaces we are using the Default Navigation Model, which includes a Pages Query which shows all the accessible pages for the current space.
How do I create an EL Expresion that allows me to perform navigation from within a page?
<af:commandLink text="Link"
id="cl1"
actionListener="#{navigationContext.processAction}"
action="pprnav" >
<f:attribute name="node"
value="#{navigationContext.defaultNavigationModel.rootNode.childByIndex[1]}"/>
</af:commandLink>
this gets me a reference to the desired page, but only as long as the Pages Query is the first item in the model and my page is at index 1 in the Pages Query. Not very robust.
Is there any way to refer to a page by its title or something like that?
I know Business Role Pages in Spaces have a direct URL I could use, but I want to use partial page navigation wherever possible.

Jaap,
Can you describe your exact use case in a bit more detail?
Do you wish to link to a specific page or generate links to all pages (iterating through the pages) in the space? If it is the former, how do you identify the specific page? If it is the latter, consider creating a custom navigation model that contains only a pages query and iterate over this.

Detail blocks in tab pages not queried automatically

Hi
I have some generated forms with the following layout:
- in the content canvas top, the master block
- below the master block (in the same content canvas), a tab canvas with 2 (or more) pages with detail blocks
When I query the master block, the detail blocks are not automatically queried, the user must navigate to them to make the automatic query work.
I found out that it is something related to the blocks not being in the same canvas. But visually, they are in the same canvas, I would like that the detail blocks were queried automatically.
Is this possible? I think this layout is very common and useful, I am sure Designer has some way to do this.
Thanks
Luis Cabral

Hi
I found it - I just set BSCSCP preference correctly, and now it works fine!

Displaying tab page canvas on content canvas in Forms 6i

Forms [32 Bit] Version 6.0.8.8.0 (Production)
I have an existing form which has multiple canvases and there are couple of fields on Content canvas and then on the same content a Tab canvas is layed out. I can see both canvases in same layout editor and select and move the tab canvas.
But when I create a new form and want to layout a tab canvas on top of content, it appears in a separate layout editor window on design time.
I want it like below:
-----------content--------------------
|                                       |
|                                       |
|                                       |
|TabPag1     TabPage2                   |
|                                       |
|                                       |
|                                       |
|                                       |
|                                       |
|                                       |
-------------content------------------How can I create it so that it appears in same layout editor window at design time and appears in same window like one canvas on runtime.

In order for the Tabbed Canvas to appear on the Content Canvas in the Layout Editor, you have to actually draw the Tabbed Canvas on the Content Canvas; eg: open your content canvas in the layout editor, click on the tabbed canvas toolbar button and then draw it on your content canvas. If you create the Tabbed Canvas object through the Object Navigator and then set the properties so it would display on the content canvas - it won't be visible on the content canvas with the layout editor.
This is a bit of a quirk in the Forms Builder and they haven't corrected this in any of the newer versions of Forms yet. :-(
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

11g Forms Tab-Page Navigation

I am using Forms 11g on Solaris.
A main navigator form opens another form which has a content canvas, tab-page canvas and (3) stacked canvases.
The problem I am having is with tab-page navigation.     CTRL+TAB ( next ) and CTRL+SHIFT+TAB ( previous )
As long as I do not initiate navigation from an item on a stacked canvas, navigation is as expected ( between tab pages only ).
However, navigating from an item within a stacked canvas causes navigation to the parent form.
Repeating the tab navigation keys from the parent form returns to the called form.
Note that both key-combinations simply toggle back and forth.
I have found no documentation on tab-page navigation so any help / insight is greatly appreciated !
Mike

Hi Soofi !
Changing block order in the called form does not affect the navigation between tab pages.
Note in my question that the resulting undesired navigation is to and from the calling form ( which only has one block ).
Navigation between items and blocks works as expected.
To reiterate -
     The only navigation that fails is when I attempt to CTRL+TAB or CTRL+SHIFT+TAB to another tab page from within an item on a stacked canvas.
     Attempting this navigation results in moving the cursor focus to the calling form.
     Repeating the attempt from the calling form moves back to the called form.
     None of your methods mention navigation between forms .
Thanks for your interest.

Tab Page Navigation Problem???

Hi All:
I am facing problem with tab page. when I save some record at the last tab then it moves towards its previous tab page. May be navigation becomes wrong.Record is saved. What would be the solution? Can anyody tell me. Thanks
Ali

Just two wonders...:
1) Are the blocks ordered in the Object Navigator ... as they appear in the tabs of your tab canvas...????
2) Is there in the 'save trigger' or in other place (which take place in the save process) a "go_item(<itemname_of_the_previous_tab>)" or "go_block(<block_resides_in_the_previous_tab>)"...????
Greetings....
Sim

Issue with tabbed block in selection screen

Hi All,
I have created a report program with the following code.
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
PARAMETERS: p1 TYPE c LENGTH 10.
SELECTION-SCREEN END OF SCREEN 100.
SELECTION-SCREEN BEGIN OF SCREEN 200 AS SUBSCREEN.
PARAMETERS: q1 TYPE c LENGTH 10.
SELECTION-SCREEN END OF SCREEN 200.
SELECTION-SCREEN: BEGIN OF TABBED BLOCK mytab FOR 10 LINES,
                  TAB (20) button1 USER-COMMAND push1,
                  TAB (20) button2 USER-COMMAND push2,
                  END OF BLOCK mytab.
INITIALIZATION.
button1 = 'Selection Screen 1'.
button2 = 'Selection Screen 2'.
mytab-prog = sy-repid.
mytab-dynnr = 0100.
mytab-activetab = 'PUSH1'.
AT SELECTION-SCREEN.
CASE sy-dynnr.
    WHEN 1000.
      CASE sy-ucomm.
        WHEN 'PUSH1'.
          mytab-dynnr = 100.
        WHEN 'PUSH2'.
          mytab-dynnr = 200.
      ENDCASE.
ENDCASE.
Execute the program and click on the second tab-page. Now, click on the 'Execute' button or press F8 (there is no specific functionality coded here).
The issue now is that the first tab-page is displayed, instead of the second tab remaining displayed. I require the navigation to remain within the second tab-page after the EXECUTE button is clicked.
Could someone help me out with this issue?
Regards,
Dinup
Edited by: Dinup Sudhakaran on Feb 18, 2008 1:40 PM

Hi,
Go through below document with example code.
It will help you.
Tabstrip Controls on Selection Screens
As with screens, you can now use tabstrip controls on selection screens. To do this, you must define a tabstrip area and the associated tab pages, and assign a subscreen to the tab pages. You do not have to (indeed, cannot) declare the tabstrip control or program the screen flow logic in your ABAP program, since both are automatically generated.
To define a tabstrip area with tab pages, use the following statements in your selection screen definition:
SELECTION-SCREEN: BEGIN OF TABBED BLOCK <tab_area> FOR <n> LINES,
                  TAB (<len>) <tab1> USER-COMMAND <ucom1>
                              [DEFAULT [PROGRAM <prog>] SCREEN <scrn>],
                  TAB (<len>) <tab2> USER-COMMAND <ucom2>
                              [DEFAULT [PROGRAM <prog>] SCREEN <scrn>],
                  END OF BLOCK <tab_area>.
This defines a tabstrip control <tab_area> with size <n>. The tab pages <tab1>, <tab2> are assigned to the tab area. <len> defines the width of the tab title. You must assign a function code <ucom> area to each tab title. You can find out the function code from the field SY-UCOMM in the AT SELECTION-SCREEN event.
For each tab title, the system automatically creates a character field in the ABAP program with the same name. Before the selection screen is displayed, you can assign a text to the field. This then appears as the title of the corresponding tab page on the selection screen.
You must assign a subscreen to each tab title. This will be displayed in the tab area when the user chooses that title. You can assign one of the following as a subscreen:
A subscreen screen defined using the Screen Painter.
A selection screen subscreen, defined in an ABAP program.
You can make the assignment either statically in the program or dynamically at runtime. If, at runtime, one of the tab titles has no subscreen assigned, a runtime error occurs.
Static assignment
Use the DEFAULT addition when you define the tab title. You can specify an ABAP program and one of its subscreens. If you do not specify a program, the system looks for the subscreen in the current program. When the user chooses the tab title, it is activated, and the subscreen is assigned to the tabstrip area. The static assignment is valid for the entire duration of the program, but can be overwritten dynamically before the selection screen is displayed.
Dynamic assignment
For each tab area, the system automatically creates a structure in the ABAP program with the same name. This structure has three components PROG, DYNNR, and ACTIVETAB. When you assign the subscreens statically, the structure contains the name of the ABAP program containing the subscreen, the number of the subscreen, and the name of the tab title currently active on the selection screen (and to which these values are assigned). The default active tab page is the first page. You can assign values to the fields of the structure before the selection screen is displayed, and so set a subscreen dynamically.
If you assign a normal subscreen screen to a tab title, the dialog modules containing its flow logic must be defined in the current ABAP program. If the subscreen is a selection screen, user actions will trigger the AT SELECTION-SCREEN event and its variants (see Selection Screen Processing). This includes when the user chooses a tab title. If one selection screen is included on another, AT SELECTION-SCREEN will be triggered at least twice firstly for the "included" selection screen, then for the selection screen on which it appears.
REPORT demo_sel_screen_with_tabstrip.
DATA flag(1) TYPE c.
SUBSCREEN 1
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p1(10) TYPE c,
            p2(10) TYPE c,
            p3(10) TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN END OF SCREEN 100.
SUBSCREEN 2
SELECTION-SCREEN BEGIN OF SCREEN 200 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
PARAMETERS: q1(10) TYPE c OBLIGATORY,
            q2(10) TYPE c OBLIGATORY,
            q3(10) TYPE c OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN END OF SCREEN 200.
STANDARD SELECTION SCREEN
SELECTION-SCREEN: BEGIN OF TABBED BLOCK mytab FOR 10 LINES,
                  TAB (20) button1 USER-COMMAND push1,
                  TAB (20) button2 USER-COMMAND push2,
                  TAB (20) button3 USER-COMMAND push3
                                   DEFAULT SCREEN 300,
                  END OF BLOCK mytab.
INITIALIZATION.
button1 = text-010.
button2 = text-020.
button3 = text-030.
mytab-prog = sy-repid.
mytab-dynnr = 100.
mytab-activetab = 'BUTTON1'.
AT SELECTION-SCREEN.
CASE sy-dynnr.
    WHEN 1000.
      CASE sy-ucomm.
        WHEN 'PUSH1'.
          mytab-dynnr = 100.
          mytab-activetab = 'BUTTON1'.
        WHEN 'PUSH2'.
          mytab-dynnr = 200.
          mytab-activetab = 'BUTTON2'.
      ENDCASE.
    WHEN 100.
      MESSAGE s888(sabapdocu) WITH text-040 sy-dynnr.
    WHEN 200.
      MESSAGE s888(sabapdocu) WITH text-040 sy-dynnr.
ENDCASE.
MODULE init_0100 OUTPUT.
LOOP AT SCREEN.
    IF screen-group1 = 'MOD'.
      CASE flag.
        WHEN 'X'.
          screen-input = '1'.
        WHEN ' '.
          screen-input = '0'.
      ENDCASE.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
ENDMODULE.
MODULE user_command_0100 INPUT.
MESSAGE s888(sabapdocu) WITH text-050 sy-dynnr.
CASE sy-ucomm.
    WHEN 'TOGGLE'.
      IF flag = ' '.
        flag = 'X'.
      ELSEIF flag = 'X'.
        flag = ' '.
      ENDIF.
ENDCASE.
ENDMODULE.
START-OF-SELECTION.
WRITE: / 'P1:', p1,'Q1:', q1,
         / 'P2:', p2,'Q2:', q2,
         / 'P3:', p3,'Q3:', q3.
This program defines two selection screens 100 and 200, as subscreens, and places a tabstrip control area with three tab pages on the standard selection screen. A subscreen screen 300 (from the same program) is assigned statically to the third tab page.
The layout of screen 300 is:
The input/output fields P1 to Q3 are defined by using the parameters from the ABAP program The pushbutton has the function code TOGGLE.
The screen flow logic for screen 300 is as follows:
PROCESS BEFORE OUTPUT.
MODULE init_0100.
PROCESS AFTER INPUT.
MODULE user_command_0100.
Both dialog modules are defined in the ABAP program.
When you run the program, the standard selection screen appears. In the INITIALIZATION event, the texts are defined on the tab titles, the subscreen selection screen 100 is assigned to the tab area, and the first tab title is activated.
User actions on the selection screen are processed in the AT SELECTION-SCREEN event block. In particular, it is here that the subscreens are assigned and tab titles activated when the user chooses one of the first two tab titles. This is not necessary for the third tab title, since the dynamic assignment (screen 300) is always placed in the structure MYTAB when the user chooses it.
Before the subscreen screen is displayed, the PBO module INIT_100 is executed. User actions on the subscreen screen trigger the PAI module. This includes when the user chooses a tab title. After that, the AT SELECTION-SCREEN event is triggered.
Messages in the status line show where an action has been processed.

Index file increase with no corresponding increase in block numbers or Pag file size

Hi All,
Just wondering if anyone else has experienced this issue and/or can help explain why it is happening....
I have a BSO cube fronted by a Hyperion Planning app, in version 11.1.2.1.000
The cube is in it's infancy, but already contains 24M blocks, with a PAG file size of 12GB. We expect this to grow fairly rapidly over the next 12 months or so.
After performing a simple Agg of aggregating sparse dimensions, the Index file sits at 1.6GB.
When I then perform a dense restructure, the index file reduces to 0.6GB. The PAG file remains around 12GB (a minor reduction of 0.4GB occurs). The number of blocks remains exactly the same.
If I then run the Agg script again, the number of blocks again remains exactly the same, the PAG file increases by about 0.4GB, but the index file size leaps back to 1.6GB.
If I then immediately re-run the Agg script, the # blocks still remains the same, the PAG file increases marginally (less than 0.1GB) and the Index remains exactly the same at 1.6GB.
Subsequent passes of the Agg script have the same effect - a slight increase in the PAG file only.
Performing another dense restructure reverts the Index file to 0.6GB (exactly the same number of bytes as before).
I have tried running the Aggs using parallel calcs, and also as in series (ie single thread) and get exactly the same results.
I figured there must be some kind of fragmentation happening on the Index, but can't think of a way to prove it. At all stages of the above test, the Average Clustering Ratio remains at 1.00, but I believe this just relates to the data, rather than the Index.
After a bit of research, it seems older versions of Essbase used to suffer from this Index 'leakage', but that it was fixed way before 11.1.2.1.
I also found the following thread which indicates that the Index tags may be duplicated during a calc to allow a read of the data during the calc;
http://www.network54.com/Forum/58296/thread/1038502076/1038565646/index+file+size+grows+with+same+data+-
However, even if all the Index tags are duplicated, I would expect the maximum growth of the Index file to be 100%, right? But I am getting more than 160% growth (1.6GB / 0.6GB).
And what I haven't mentioned is that I am only aggregating a subset of the database, as my Agg script fixes on only certain members of my non-aggregating sparse dimensions (ie only 1 Scenario & Version)
The Index file growth in itself is not a problem. But the knock-on effect is that calc times increase - if I run back-to-back Aggs as above, the 2nd Agg calc takes 20% longer than the 1st. And with the expected growth of the model, this will likely get much worse.
Anyone have any explanation as to what is occurring, and how to prevent it...?
Happy to add any other details that might help with troubleshooting, but thought I'd see if I get any bites first.
The only other thing I think worth pointing out at this stage is that we have made the cube Direct I/O for performance reasons. I don't have much prior exposure to Direct I/O so don't know whether this could be contributing to the problem.
Thanks for reading.

alan.d wrote:
The only other thing I think worth pointing out at this stage is that we have made the cube Direct I/O for performance reasons. I don't have much prior exposure to Direct I/O so don't know whether this could be contributing to the problem.
Thanks for reading.
I haven't tried Direct I/O for quite a while, but I never got it to work properly. Not exactly the same issue that you have, but it would spawn tons of .pag files in the past. You might try duplicating your cube, changing it to buffered I/O, and run the same processes and see if it does the same thing.
Sabrina

Set Tab Page property - Label property dynamically

Hi All,
I have a Tab page canvas.
My 1st tab canvas Label is "Projects".
If i entered 2 record means i need to change the Tab page label as "Projects 2".
IN which trigger , i will write a coding for that?
If i am in the Tabbed canvas , it is working .If i come to Main canvas the Tab canvas label is clearing.
Can u tell me suggestion for that.

You could go with a combination of a Calculated item of type "Summary" and another calculated item of type "Formula":
Create a calculated item :BLOCK.IT_COUNT of type "summary" which counts one of the NOT NULL-items in your data-block.
Create a Program Unit liek that:
FUNCTION FK_CHANGE_COUNT
RETURN NUMBER IS
BEGIN
SET_TAB_PAGE_PROPERTY('YOUR_TAB_PAGE', LABEL, 'The Text' || :BLOCK.IT_COUNT);
RETURN 1;
END;Create a second calculated item of type "Formula", in the formula enter FK_CHANGE_COUNT.
Now, everytime the count of the block changes, the "dummy" function will be called to calculate whatever, and the function sets the Tab-Label to the desired value.

Navigation block with tab page canvas

Similar Messages

Maybe you are looking for