Ndiswrapper won't work on 0.7.1 install [split]

I can not get ndiswrapper working properly with the kernel and initrd support.

Gullible Jones wrote:Wrong thread...
split.

Similar Messages

My iphone won't work after fatal error occurred installing iOS5.1 have followed allsteps to reconfigure software onto windows still no phone just a usb and itunes picture on screen

my iphone won't work after fatal error occurred installing iOS5.1 have followed allsteps to reconfigure software onto windows still no phone just a usb and itunes picture on screen

Connect the phone directly to the computer, not a hub.
Disconnect all other USB devices except keyboard and mouse.
Disable your firewall
Disable your antivirus
In iTunes if it recognizes the phone click "Restore"
If it doesn't recognize the phone:
Disconnect the phone from the phone end, leave the USB cable plugged into the computer
Hold the HOME and SLEEP buttons until the screen turns black, excactly 10 seconds, then release the SLEEP but continue holding the HOME (If an Apple logo appears you have held SLEEP too long; do it over)
While holding HOME connect the cable to the phone
As soon as iTunes recognizes the phone release the HOME button and it should restore.
If neither procedure works note the exact error message and post it.

Mic won't work with Skype on Windows installed using BootCamp Assistant?

I recently purchased a 17" MacBook Pro in Australia. I installed Windows 7 Ultimate and updates as well using BootCamp Assistant. Everything works fine in Windows except when I downloaded and logged in to Skype and video-called one of my friends.
I could see my friend and he could see me, but we couldn't hear each other. I beleive there is a problem with the built-in mic, which Windows doesn't recognize or doesn't have the driver for it installed. If it's a driver problem, can anyone tell me which specific driver to download? It'd make things so much easier!
Please help!
Thanks.

Did you download and install the drivers? You need to download the drivers then install them from within Windows. See the Boot Camp Installation Guide. http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
Also search these forums for links to the audio drivers from the manufacturers's site.

Keyboard won't work after attempted 2.1 install

I have XPSP2 installed on its on HD. I used Boot Camp Beta. When I upgraded to Leopard I installed BC 2.0 and everything worked perfectly. When BC 2.1 was announced, I made sure all firmware and other upgrades were in order and then ran the upgrade as an exe from the desktop. I got error messages concerning the apple keyboard (standard Mac). Subsequent to installation the keyboard would not work at all and Device Manager stated the keyboard drivers were not installed. After several failed attempts, I uninstalled 2.1 and attempted to reinstall 2.0 from the Leopard disc. The keyboard still does not work and Device Manager shows drivers not installed. I tried installing 2.0 and 2.1 in Safe Mode and I can't. I tried to repair the existing XP using the the install disc and that causes an error message. I am at a loss as to what to do.
Help

I have a similar issue. I updated to 7.1.2 last night. Now my Bluetooth audio doesn't work.
The iPhone appears to be paired with my Bluetooth enabled car stereo, but will not play any music.
Initially the stereo said 'Bluetooth connection failed' but then I disconnected and re-paired; now both the stereo and iPhone say 'connected' but still no audio.
If I press play on the phone or stereo, there's no response.
I can confirm that my Bluetooth keyboard pairs fine and I can type, change the brightness and volume but I cannot pause or play music.
My guess is that there was a change to the iOS Bluetooth Audio functionality. One that's introduced an incompatibility with one or several of the Bluetooth audio profiles: iOS: Supported Bluetooth profiles
Vid

Quicktime won't work on IE when Itunes installed and vise versa

I can't view Quicktime movies on Internet Explorer unless I install the standalone quicktime installation. But then I can't run Itunes, becuase it says quicktime isn't installed. If I install Itunes with quicktime, then the videos in IE stop working. I've tried uninstalling both. And installing each separately in different orders to try to get this to work. I do get one error each time quicktime is installed. [Quicktime for windows] [there is a problem with this windows installer package a program required for this install to complete could not be run]. It installs anyway. I have not been able to figure out what program is missing, nor find any solutions to that error and am trying to avoid a complete reinstall of windows.
Any ideas?

Hi,
Can you check the solution available in this FAQ page: http://helpx.adobe.com/flash-player/kb/flash-player-faq.html?
Also this page http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html can help you.
With regards,
Prabhu

My Hp X1000 Mouse won't work on my desktop after installing.

As stated above, I recently bought a HP X1000 Mouse, plugged it into my desktop. It says that the drivers have all installed correctly but the mouse fails to work. Can anyone please tell me what the problem is? Or if there is a way to fix this. I will be forever grateful, Thanks

Hello Mitch_Griff,
You state that you have recently purchased an HP mouse and it will not work, is that correct? I will try to help you.
Have you tried different USB ports on your computer. Also can what model computer are you trying to use it with?
Please respond back at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Ethernet port won't work on Win7 from Bootcamp install?

hey guys, i was just trying to install Win7 via Bootcamp. Win7 boots up with no issues at all, but i can't connect to the internet because the ethernet isn't picked up or it doesn't work. i must have done something wrong in Bootcamp -- what can i do?
thanks

Did you install the Boot Camp drivers for Windows?
You can download them if you haven't already from Boot Camp Assisstant.
Open Boot Camp Assisstant (/Applications/Utilities/Boot Camp Assisstant.app) and click on continue. On the next page tick only "Download the latest Windows support software from Apple". Click on Continue again, and then save them onto some external storage you will be able to access from Windows. Once that is complete, restart in Windows, connect your external storage, find a folder on it called WindowsSupport, open it, and double-click on setup.exe. This will install drivers for all of your Mac's hardware, including the Multi-Touch Trackpad, access to HFS storage volumes, and most importantly, ethernet.

Flash is up-to-date, but Plugin won't work

Hi!
I'm using Firefox 29.0.1 on Windows 8, (also up-to-date), and Flash plug-in won't work. I re-downloaded & installed Adobe Flash 13.0.0.214...I verified it on their website, but I can't get the plugin to work. I had no problem with it earlier today, but for some reason it won't work anymore.
PLEASE HELP!
Thank you,
Nuts4Mutts :(

Hi!
Yes, I checked on Adobe's site THREE TIMES & I have the latest version, & the animations they have on their site worked fine...I saw them perfectly, (both the red cube bouncing around & the cartoon tree with the animated yellow & orange colored leaves). I'm at a loss why on most sites I have no problem watching streaming video, but on 2 of the other sites that I watch EVERY day, I suddenly get the "Error loading plugin" message on a black screen. It's driving me nuts, as I was watching these sites earlier this morning & everything was fine. The confusing part, to me at least, is why is this plug-in problem is ONLY affecting 2 of the sites I watch AND why did it happen out of the blue...I was watching them without any problem early this morning, just like I do ALL DAY...EVERY DAY!!! (I watch several wildlife live-cams, so it's important that I keep up with changes in the birds I normally watch). None of the other sites I watch are affected...what would cause this to happen?
I even did a complete shut-down of my laptop, waited, then re-started. Usually, this would fix just about anything...for some reason, I can't get the video stream on 2 cams...I can still view the other cams I watch, though.
I DID install MS's weekly updates, but it didn't affect my ability to see streaming video on most of the sites I watch; so far only on 2 of them.
I only have the pop-up blocker that comes with Firefox, but other than that there's nothing else in my add-ons that could interfere. I checked my plugins several times, just to make sure Flash was up-to-date & they're fine, too. The mystery is why I can see my wildlife cams on 4 of the sites I watch but not on the other 2, especially when I was watching them early this morning!!! I feel like I've been dropped-off in some sort of cyber-space time warp, or in the twilight zone & I'm ready to scream!
If there are any other suggestions, please post them...I'm very behind in my cam-watching!
On another Firefox-related problem...where do I post a question about some add-ons not working or being visible AND not being able to customize since the last update? I know...I'm just having a very confusing, frustrating day!
Thanks again for your ideas...I need all the help I can get!
Nuts4Mutts :(

FaceTime won't work since ios7 installed

FaceTime won't work since iOS 7 got installed. Settings have not changed.

powercycly and keep trying, it will let u get through eventually.

ITunes 6 won't work!!!

Hey there, I'm Dave from Canada...
I downloaded the newest version of iTunes with Quicktime 7 and as I tried to install it i received "Error Code -3" - Quicktime installation failed. After that I could not run iTunes anymore. I managed to downgrade to iTunes 4.something but then all the audio went mental and the sound won't work properly. I tried installing the standalone quicktime and I get Error 1714 - cannot remove old quicktime, etc. I have removed EVERYTHING and I still can't get quicktime to install...I'm very angry, cause I would like to update my ipod, but this has become impossible. Apple has been lackluster in giving support, since my "warranty" on my ipod is done.
HELP ME PLEASE!!!!
Anything you guys can suggest would be great!
Thanks, Dave from Canada

Tried all of that, and nothing....I finally gave up and just reformatted my C: drive. That finally worked and my iPod is back! Yay! Now I can go to the gym again...
Thanks for all the help, however, and good luck helping others.
Dave!
By the way, Apple's policies on helping people with problems from iTunes/Quicktime suck and they can kiss my butt. I was completely frustrated when they suddenly stopped helping me when they realized the warranty on my iPod was done, regardless of the fact that I was actually getting help for iTunes/Quicktime, their free programs that they cannot charge an extended warranty for! Now I am going to question whether or not to buy another Apple product after this. I received better support here then from the "experts"

Solutions Center patch won't work. Windows 7 from Vista. C6280.Red

I have a Dell Inspiron (Windows 7) and a C6280 on red with my husband's Hp Pavillion lap (Vista). When I click Solutions Center to scan, a pop-up tells me I cannot do that just because. I have a CD for Vista since the lap is older than the Dell, when I try it Windows tells me to forget it. Then a window tells me Solutions Center won't work because I never finished installing something or "other". If they mean PS_AIO_02_NetWired-FullWin_WW-130-140 I installed it 4 times. "Others" were many. When I try the patch (dot4patch_reboot.exe) it immediately reboots and... nothing else. For rebooting my computer I don't need a patch, I'm obstruse but not that much. This is the 4th day I'm working at this and I'm desperate. I'm thinking of throwing the whole rubble out of the window. In case I change that for myself: would a kind soul help me with this mess, please, please, pretty please? You might have noticed I'm not very good at this kind of problem. Therefore I have something extra to ask: make it simple? Like Forums for Dummies? Thank you so very much. Whether you can help me or not you had the patience to read all this. Bless you.

RitadeCasia,
I am sorry it is not working.
This part of your statement concerns me:
"Only new happening today was an HP window offering downloads, erasings and so forth with the image of a lovely Oriental girl."
This Update message is not from HP. HP does not offer any updates while showing the image of any lovely person.
You might consider the following:
The system may be infected with a Virus (corruption causing software) or Malware (essentially an unwanted or malicious program)
Use your best Anti-Virus software and run the best, deepest scan that is offered. When the first scan is complete, run your Anti-Virus again.
Anti-Virus Software packages
If you do not have Anti-Virus software, or if you need recommendations:
Avast Anti-Virus   NOTE: You may select the free version. Avast "plays well with others: it gets along with Windows Defender (the Microsoft Anti-Virus that comes standard on your computer.
Recommendations provided by Microsoft for Anti-Virus software that works well with Windows 7 and most probably with Vista as well:
Windows 7 consumer security software providers
Malwarebytes software can help pull out, that is, it can extract and destroy those programs that do not belong on your computer. Download and install the Free Version. You might run it at least one time, perhaps twice.
Malwarebytes Anti-Malware Free
After each time the computer is scanned, reboot / restart your computer and log in.
======================================================================================
File System Scan -- sfc
Assuming the computer is considered "cleaned" of unwanted virus and malware software, you might next complete a system Scan to help make sure the File System is healthy:
Using System File Checker (SFC) to Restore System Files
System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Wi...
The sfc scan can be run more than one time to make sure it catches everything it can find.
After the sfc scan completes, try your installations again.
======================================================================================
New Backups -- System Recovery
After the scans are completed and you are fairly confident that the system is clean, you will want to create a new backup of your personal data.   This is a backup of your Account, files, and any "extra" folders that you have created that is not part of the Vista Operating System.
You do not want to over write any previous backups this time. Example: If you have a backup of your data on a USB stick that you made last month, two months ago -- or any time before the problems began, then you should KEEP that older backup and make a new backup on a different USB drive.
In other words: You need to make new backups -- but you may not yet be able to trust them 100%; keep the older backups along with the new ones. IF you end up having to run a full Recovery on the computer, you will then have a choice about which personal backups to load after the recovery is complete.
Recovery
If you cannot fix the persistant problems on your computer, you may have to run a full Recovery to reinstall your Vista Operating System. Please READ all the following documents before you run a Recovery.
You may NOT need to run the Recovery if you can fix the problems and your computer is again "acting normally". I am providing the Recovery information in case you need it.
Reminder: A full Recovery is destructive -- the Recovery procedure removes your data, removes the Operating System, and then reinstalls Vista. You must then complete additonal Recovery steps to load your personal data into place on the computer. **
** The exception: IF you have created (previously) a full IMAGE backup, you can use it to restore your computer to that exact condition. A full Image contains not only the Vista OS, it also contains all your personal data, your programs, and everything else that was on the main disk when the Image was created.
If you do not already have an Image, you will be using other means to Recover the system back to working order.
Documents to Help with Backups and Recovery
The first document shows you how to use the computer's programs to make personal backups.   This is not the Recovery procedure -- it is something you do BEFORE you run the Recovery. This procedure is related to Recovery in that it is preparation work you do ahead of time to protect your data.
Reminder: Do not overwrite your previous backups -- IF your system is infected AND the Anti-Virus programs cannot completely fix the problem, then you still need to make backups, but you also need to understand that they may not be 100% safe or complete. You can use the new backups, just know that IF they are later found to be infected, you will be depending on your older backups to restore your personal data -- you need to keep both old and new personal backups on hand and ready to use.
Use Windows Basic Backup and Restore Center to Back Up Files in Vista
The above doc calls:
How to Back Up Your Files (Windows Vista or XP)
This document shows you how to run the Recovery procedure -- this is the "destructive part" that removes and then reinstalls Vista.
Recover Windows Vista Operating System Using HP Recovery – Notebooks
This document explains what steps are necessary to completely restore your computer after you complete the initial Recovery of the Vista Operating System: installing personal programs (Firefox) and personal files (your personal documents and pictures).
NOTE that you will need on hand: Downloads or CDs of your programs that are not part of Vista. For example, if you have installed a Photo Editing software, you will need to reload it after the Recovery.
HP Notebook PCs - Setting up Your PC After a Recovery (Windows Vista)
=====================================================================================
And, Good Luck!
Kind Regards,
Dragon-Fur

HP LaserJet Pro C1415fn color MFP - fax won't work

I have a LaserJet Pro CM1415fn color MFP on a Windows 7 64-bit laptop. I've been using the printer for two years now.
At the moment the fax function only works if I use it manually (i.e. if I place a sheet of paper on the scanner, select the "Fax" button on the printer touch pad and dial the number). However, if I want to send a fax via the PC interface, it won't work.
For example, if I open a PDF, click on "Print" and select "HP LaserJet Professional CM 1410 Series Fax", nothing happens -- no window/interface will open. If I select "HP Send Fax" or "HP Fax Setup Wizard" from the program menu, nothing happens.
I've always been sending faxes this way and I just don't know what happened... Can anyone please help?
Thanks in advance!
Claudia

Hi @Clabee ,
I see that you can't fax from the PC anymore. I can help you with this.
If this just recently happened, I would do a System Restore back to when everything was working properly.
System Restore for Windows 7.
If you would prefer not to do the System Restore, uninstall and reinstall the printer software. It might become corrupted.
Here are the steps to run the uninstall from the computer or the CD.
To uninstall from program files:
Touch the Windows key and the E key to access the computer window.
Select the C drive.
Select program files or program files x86.
Open the HP and printer name folder.
Select uninstall.
Uninstall the software from the CD:
Touch the Windows key and the E key to access the computer window. Right click on the CD for the printer, left click open in a new window, double click on uninstall.
Disable all the start up programs and temporarily turn off the Antivirus Software. How to use MSCONFIG .
Click on the start up tab and click disable all.
Download, save and install the latest drivers.
HP LaserJet Pro CM1415fnw Color Multifunction Printer Drivers.
Test the printer and try sending a fax again from the PC.
Then you will need to go back in and enable the start up programs and turn the Antivirus Software back on again.
If you need further assistance, just let me know.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there. I've uninstalled iTunes and reinstalled twice and it's not working. Please help.

I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there. I've uninstalled iTunes and reinstalled twice and it's not working. Please help.

I have not had wifi since November when I upgraded to the newest IOS version. I called the Apple help line and they told me some things to do and I tried them all and they worked for a few hours and then wifi shut off again. I kept doing what they told me and it worked for a couple more days and then I could never turn it on again. My blue tooth doesn't work either. I had to actually increase my data usage with AT&T becuase of this. When I did that in December I went to the Apple store and was told that it is a hardware issue and since my phone is out of warranty I would have to pay for a new phone because they could not fix the issue. My upgrade isn't up until June 2014 so not only do I have to wait for the upgrade and I am not paying for a new phone but I have to pay $10 plus extra a month on my cell phone bill because I was going over on my Data!!! I have been beyond upset about this and Apple is not doing anything about this nor did they offer up some way to resolve the issue because obviously it is not just some rare incident if several people are having this issue. Who knows how many people out there have had this issue and have not said anything about it. Now there is a newer update that I can't do because it requires wifi in order to download.
June can not get here fast enough and I may not go back to Iphone after dealing with this for so long with no help from Apple.

IPhoto and Apple ID won't work after system update

I've recently updated my MacBook Air to OS X v10.9.4. iPhoto won't work as i am currently using v9.2. I've tried downloading a later version but have been advised that my Apple ID will not work on this computer. NB. I have an iPhone but have not used the Apple ID on this - to my knowledge, or another Apple ID on my system. I'm a basic level user so any advice on this would be great.
Many thanks,
Elza

have been advised that my Apple ID will not work on this computer
Advised how, exactly?

PDFMaker loads but won't work in Word 2013 - Acrobat XI and DC - Win 8.1 Pro

OK, I opened a question that never got answered and it never was resolved...
Just updated to Acrobat DC - same problem exists...
I'm running Windows 8.1 Pro fully up to date..
I've uninstalled and reinstalled Office 2013 Pro (I have an Office 365 subscription so it's the click-to-run install).
I've uninstalled and reinstalled Acrobat Pro DC.
I've rebooted (a full restart, not Win 8's fast boot restart) between each installation.
I've tried this in multiple Office applications, none of them work EXCEPT for Outlook.
For the following I will use Word as my examples...
I've uninstalled all plug-ins and still it won't work.
I've tried running Word as Administrator.... still won't work.
OK... so this is what it looks like... as you can see the toolbar loads, but no icons...
https://www.dropbox.com/s/wsbs4kon3z4e965/Word%20Acrobat%20Screenshot.jpg?dl=0
When you click on those buttons... it goes through the motions as if it were creating the PDF... but no file is ever created...
If I right-click on a Word document and select Convert to PDF - it goes through the motions of creating the PDF, asks me where to save... and then a dialog box named "Acrobat PDFMaker" comes up saying " {Exclamation Point Yellow Triangle Icon} An unexpected error occurred. PDFMaker was unable to produce the Adobe PDF."
If I right-click on a text file... and select Covert to PDF, it immediately pops open a PDF of the text file. Same with any image file.
This was all working perfectly up until out of nowhere it stopped working on January 26, 2015. See my original posting here: Acrobat XI Pro Word 2013 add-in stopped working
I can Print to PDF using the PDF Printer without any problems.
Creating a PDF in Outlook, no problems...
I'm hoping somebody can figure this one out... I'm completely stumped.... and I'm usually very good at troubleshooting stuff.

Click to Run according to Microsoft:
https://technet.microsoft.com/en-us/library/jj219427.aspx
"Click-to-Run is a Microsoft streaming and virtualization technology that reduces the time that is required to install Office and helps you run multiple versions of Office on the same computer. The streaming technology enables you to download and begin to use an Office product before the whole product is installed on your computer. The virtualization technology provides an isolated environment for Office to run on your computer. This isolated environment allows you to run the latest version of Office side-by-side with an earlier version of Office that is already installed on your computer."

Ndiswrapper won't work on 0.7.1 install [split]

Similar Messages

Maybe you are looking for