Need a  code / How  to  call outstanding notification for a loggined user !!

hi all ,
Need a  code / How  to  call outstanding notification for a loggined user !!
i need to create a service  such then when the user logins in he should see the outstanding service..

Hello Prashanth,
1) Goto QMEL table read OBJNR of the notification.
2) Pass the notification number and the language to the function module "STATUS_TEXT_EDIT".
    in the return parameter read the parameter LINE, based on the first four characters you can find out       the status of the notification.
OSNO - Outstanding notification
NOPR - Notification in process
NOCO - Notification completed
Regards,
TP

Similar Messages

  • I need to know how to stop a notification that keeps coming up when playing a spades game, that keeps telling me to go to the game center. I even shut off the notifications in the settings, this is an anoying problem

    I need to know how to stop a notification that keeps coming up when playing a spades game, that keeps telling me to go to the game center. I even shut off the notifications in the settings, this is an anoying problem

    I'm pretty sure this is an Apple thing and you can't do anything about it. To get rid of the notification just do as it asks then try to forget about it.

  • In VB Programming code -- How to access the formula for suppressing a field

    In VB Programming code -- How to access the formula for suppressing a field
    I am using Crystal Reports 2008 v1
    Using VB code, I am attempting to modify a Crystal Report before exporting it into a PDF format and then displaying it on the Web.
    My problem is that I am unable to access the formula used to dynamically suppress a field.
    The following code is working:
    mySections = rd.ReportDefinition.Sections
    For Each mySection As CrystalDecisions.CrystalReports.Engine.Section In mySections
       ' myFieldToChange is a String set to the text of the field I need to adjust the Suppression
       iloop = 0
       For Each RecObj As CrystalDecisions.CrystalReports.Engine.ReportObject In mySection.ReportObjects
               If mySection.ReportObjects.Item(iloop).Name.ToLower = myFieldToChange Then
                   myTextObject = CType(mySection.ReportObjects.Item(iloop), CrystalDecisions.CrystalReports.Engine.TextObject)
                   myTextObject.Text = "new field text goes here"
                   mySection.SectionFormat.EnableSuppress = True
                   '  Here is where I want to change the formula for the Suppression
                End if
                iloop = iloop + 1
        Next
    Next
    I can not find any reference to the actual suppression formula in the SDK help file.
    Note, the EnableSuppress can be set to True for False, but if there is a formula for dynamic suppression, the True or False value is overwritten.  The results of the formula determine the suppression.
    Is there a way to reference this formula.  I know that I can put on in using the Crystal Report Designer software, I need to modify this formula using VB code and the SDK.

    Hello, Mark;
    If you are using the ReportDocument object you do not have access to the Conditional Suppression formula. You can get around it by using a formula field in the report for the supression and then using the FormulaField code to change it at runtime.
    If you want to change the supression condition directly at runtime you need to use RAS and the ReportClientDocument.
    Elaine

  • How can I disable notification for new install update for adobe??

    How can I disable notification for new install update for adobe (adobe reader, flash player, etc.)
    Is there way from SCCM2012 or group policy or any easy way?????
    Please help me

    If you mean the built-in functionality of Adobe Reader and Adobe Flash, it's different mechanism for both.
    For the reader, check this guide for example:
    http://www.adminarsenal.com/admin-arsenal-blog/bid/84409/Adobe-Customization-Wizard-XI-Tutorial
    For flash, check this guide for example:
    http://jthys.wordpress.com/2012/07/07/disable-automatic-updates-for-adobe-flash-shockwave-player-reader/
    After you've studied the above guides, you need to implement those to be used with ConfigMgr application deployment so that when you deploy Reader/Flash, you get the result you want = no automatic update functionality.

  • How to configure Email notification for User login's in Exchange Infrastructure?

    How to configure Email notification for User login's in Client Machines?

    Hi ,
    Based on the description , you need to assign logon scripts to the end users via group policy and also use your exchange server as the smtp server in that logon script to relay emails to the internal recipients.
    Thanks & Regards S.Nithyanandham

  • How to move Closed Notification to a new user?

    How to move Closed Notification to a new user? Anybody help! Thanks!

    Hi,
    The ideal scenario is that you don't notify a user - you notify a role instead. Roles don't get sick, get made redundant, retire, leave etc. etc. - however, it's easier said than done.
    Although it's probably not supported, I can see no harm in doing a direct table update on WF_NOTIFICATIONS to modify the recipient role. However, I would question the logic of keeping old notifications in the system - if you run the standard purge routines (and you should be!), then that will clear out the old notifications automatically.
    Additionally, I would be wary of reassigning old notifications - it would blow the audit trail completely if you move a closed notification between users (which is why there is no API for it). If Bill approved a purchase order for £1 million, and then left, I would expect (and need!) the history to shown exactly who did it, rather than a completely different user.
    I'd be astounded if Oracle does anything with any enhancement requests for Workflow any more, even if they were for things that made sense.
    HTH,
    Matt
    WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
    Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
    Have you read the blog at http://www.workflowfaq.com/blog ?
    WorkflowFAQ support forum: http://forum.workflowfaq.com

  • How to call hr_location_api.create_location for different address style with only those fields that belongs specific to  that address style.

    How to call hr_location_api.create_location for different address style with only those fields that belongs specific to  that address style. It should decide at run time means at run time it will come to know the type of address style and based on that only the fields which belong to address details mapped to calling hr_location_api.create_location.
    Thanks in advance.

    You can create a wrapper package on top of the API (hr_location_api.create_location)
    In the wrapper package you set all the values dynamically based on your requirements(say the style and add_line columns are populated on your conditions) and then you call the API.
    Does that not work ?

  • How to stop update notification for one app (iMovie) that I do not want to update

    How to stop update notification for one app (iMovie) that I do not want to update. I do not want iMovie 10 taking up nearly 3 gb on my hard disc. iMovie 9 is just fine and only takes up 1.5 gb. But I get notifications to update and don't know how to turn it off. I've gone into the Purchases tab of the App store and deleted it. I don't want to turn off Update notifications (which is irrelevant in any case because I see no option to do that in Notifications system preference pane). I just don't want to be bugged about iMovie updates. The only option I'm given is to postpone the next reminder until the next morning. -- Franklin

    Interesting; never came across that - here is the window I get (just double clicked on a random doc in the trash):

  • How to activate email notification for SC approval

    Hi Gurus;
    We are using SRM7.
    How to activate email notification for SC approval i.e. the system should send email to the approver's external email (e.g.Outlook) informing that there is SC to be approved.?
    Thanks

    Hi,
    You can schedule the /SAPSRM/OFFLINEAPPROVALSEND program.
    http://help.sap.com/saphelp_srm701/helpdata/en/31/47c6cb8e9249f2bc29444212e4704a/frameset.htm
    Regards,
    Masa

  • How to call same vi for 4 times in a single vi?

    Hi.. I ve one vi named 1D array Mult. I need to call this vi four times in another vi program. The problem i ve experienced is all the four vi outputs are same.
     My question is: How to call the same vi for many number of times?
    Thanks in advance
    Solved!
    Go to Solution.

    There is no problem (programmatically) with calling the same VI by placing it 4 times onto the block diagram.  You do not have to rename them VI1, VI2, VIn if they all do the same thing, as you have done here with 1D-arrayMult...  It's just messy.
    You may need to make re-entrant in certain cases.
    A better way to do it would of course be to use a For loop as shown (I left what you did in tact).
    Are the two formula nodes identical?  I didn't check.  If so, use a for loop there too.  Build your A and B matrices to a 3D array and auto-index in For loop - single instance of your formula node.
    It is quite concerning what you have done in your 1-D Array VI.  I have no idea what it is supposed to be doing, but it appears to be nothing; it is completely wrong.
    There are backwards wires, your While loop does nothing (there is not shift-register) - how will it Stop?!, your cases 0, 1 and 2 are all the same!  Timer of 1000ms??! hmm..
    If you are trying to multiply two matrices (arrays) together then just use the native LV function to do it and to add them at the end try this:
    Hope this helps you!
    Message Edited by battler. on 03-12-2010 03:49 AM

  • How to create a notification for new virtual machines created on Hyper-v Using SCOM or another way?

    Hi ,
    We need to  to create a notification for new virtual machines created on Hyper-v Using SCOM or another way
    thanks

    http://sincealtair.blogspot.com/2010/04/how-to-ask-questions-in-technical-forum.html
    Not nearly enough information.
    If you are asking about SCOM, it is better to ask in the SCOM forum -
    http://social.technet.microsoft.com/Forums/en-US/home?forum=operationsmanagergeneral
    .:|:.:|:. tim

  • How to Call a procedure for UI5 application ?

    Hello experts,
    What are the possible ways to call a procedure from a UI5 application?
    I am trying to call the procedure created in the blog from a ui5 application. I had an idea of calling a procedure from view and generating odata services from views, but this being a read write procedure , not exactly sure if this would work .
    Looking forward for your opinions on this .
    Regards
    Virinchy

    Virinchi,
    Go through the below posts. You can get the source code of how to do it.
    How to call HANA store procedure with table variables in xsjs?
    JSDoc: Class: Connection
    Sreehari

  • How to call 'GET CURSOR' for another screen?

    Hi Folks,
    I'm displaying a modeless dialog box. It's basically a utility to enter predefined texts such as "Dear SIR," into a table control in the main screen.
    Since this dialog box is modeless, the user can move the cursor on the <b>main</b> screen, after the dialog has been opened.
    When user clicks "Add text" button, the dialog box is calling a callback form which notifies the main program & screen that new text should be inserted, but <u>where</u> should the new text go? We need the new cursor position after it was changed by the user!
    When calling 'GET CURSOR' in the callback form, the result is failure. Also sy-curow sy-cucol are equal to 0.
    Any ideas?

    Hi Ofer,
    In your scenario, is it possible for you to use a modal dialog box?  Using a modeless dialog box is not generally preferred, because it makes things a little confusing to the user. Also it is somewhat a little more complicated for the developer for precisely the same problems that you are facing.
    Regards,
    Anand Mandalika.

  • How to stop update notifications for specific software updates

    NOTE: I apologize in advance for the extreme length of my post &amp; hope that someone will be willing to read it all &amp; then be willing to help... Thanks!
    I have been continually getting a Software Update notification for "Migration Assistant Update for Lion" (described "This update provides compatibility for migrating to a Mac running OS X Mavericks.") for quite a while now. IMHO, I consider my Mac knowledge/tech experience level (on a scale of 1-10, where 10 is a Mac Guru) to be about maybe 6 or 7 on average (&amp;von a good day maybe an 8). That's assuming, of course, something like this can be quantified in that way. LOL! ;-) Anywho, I digress... Back to my question... As a general rule I don't immediately jump &amp; install every single new update that comes out for all of my technology/electronics, no matter if Apple or Google tells me to do so. Obviously, I take all notices regarding security seriously &amp; immediately research (unless it's forced upon me) it thoroughly before installing. This is ESPECIALLY true for apps in Apple's app store or Google Play Store, &amp; I read a lot of the user reviews, as well as trusted tech gurus on the Web. Because NOT EVERY update is truly an improvement (mostly b/c of the failure to FULLY test them before releasing, more like unleashing, them to the public...Microsoft has mastered this FUBAR technique to absolute 'perfection', or something like that...haha!) OY, I'm so sorry for continually getting off topic. Okay, seriously now, here's what I want to know:  Is there any way to tell Apple I don't want to install one of their recommended updates &amp; also to stop bugging me about it? I'm specifically referring to the one I mentioned above. Everything I found online about Mavericks made me want to stay VERY FAR AWAY from it. I could be wrong or found bad info, but I don't think so. Please let me know if I'm wrong, because I really want to make the best/most informed decision possible. Thanks!
    That being said, today I received notifications about Apple's latest security update (2014-001), plus one for Safari.  I plan to install the security update for sure  &amp; most likely the one for Safari (even though I stopped using it months ago &amp; started using either Chrome, Opera or Firefox - I still haven't picked a fave, but use Chrome 90% of the time... I'm open to suggestions about these apps too...)... But, I don't want to mess with the "Migration Assistant" one.
    I would really love some help from my fellow Mac users... I apologize for being long winded &amp; will try to reign in that nagging writing flaw in future posts. Also, I apologize if I've missed something that's totally obvious &amp; easily found on this or other forums/sites, but I really did try to find an answer before posting my question here...
    Thanks Mucho to all of you who were able to read through my mini-novel (&amp; not fall asleep in the process) &amp; actually found my question at the end!! I would like to say "THANK YOU!!" in advance for any &amp; all help y'all are willing to provide!!! :-D
    Hope you have a FANTABULOUS day! (^_-) Sincerely, Care ;-)

    Wow, now that I see how extremely long my post is on screen, I'm a wee bit embarrassed... I'm hoping someone will be willing to overlook this annoying factor &amp; provide a suggestion... :-/ Signed w/shame, Care :-/

  • How to set audio notification for your email?

    How to you set an audio notification for your email? Thank you any genious outthere for me

    Deighan wrote:
    ok maybe I did figured it out, if you have your wifi on and have other devices in the house, the strongest device does the notification,
    No, this is not the case at all. Every device that receives email will notify you in whatever what it's set to.

Maybe you are looking for

  • I cannot listen to my youtube videos and multitask at the same time after updating to 6.1 !?

    i had just purchased an iphone 5 and had IOS 6 already on it when i recieved it .However i decided to update to IOS 6.1 but now when i go on youtube through a browser such as chrome or safari to play youtube videos , i have to stay on that screen to

  • Advice for clean install of windows 8.1

    I finally figured out how to install windows 8.1 from an 8.1 iso and get rid of Toshiba's bloatware.  The computer ran so much better, however, I could not get the wifi installed and there was another missing PCI driver.  I went ahead and restored ba

  • The claim code was changed

    I just bought a 4625 printer. During the installation process a claim code was generated. After that I changed the printer email address. Two days later by some reason (I don't know what I did) a new claim code was generated. When I tried to print a

  • Best Anti-Virus/Firewall/Spam Software Suite for the Mac

    What are the alternatives to Intego's Internet Security Barrier dual protection software suite?

  • Safari 7.0 problem

    For years, Safari has had no problem resolving the following URL, which is no more than the homepage to our Golf Course tee time reservation system.  It works in all browsers and up until now, in Safari.  If there isn't a workaround for this, I'll ha