Need a Rotuine / Exit hellp
Hi Experts
we have a data flow coming from 2 data sources...DS1 is 2lis_11_v_itm... & DS2 is 2lis_11_vakon
My data flow is like this:
DS1 -> IS->UR- > DSO1 -> TRANSFORMATION1 -> DSO2 -> TRANSFORMATION2 -> CUBE1
DS2->IS->UR->CUBE1. (we have a start routine in this UR to filter by cond type ZZ1)
now my requirement is to bring a field (created by)in to the cube from this two data sources for each sales order. In my DS2 I have ERDAT field available and mapped with 0CREATEDBY.But in my DS1, I dont have ERDAT field ...so can any one tell me how to get this value from DS2...DS2 has all the sales orders and DS1 has open orders only...so I think by writing a start routine in Transformation2 I can get this value...my PSA table name is /bic/b00013000...
Please send me the start routine code to get the ERDAT value in to cube /any other way of doing it.
Regards
Hi,
you need to enhance your extractor by vbak-erdat to get it from there.
kind regards
Siggi
Similar Messages
-
Needed a User Exit to cross-check the mtrll master at the time of making PR
Hello Experts,
As per the requirement from my client I need a USER Exit in PR where before saving the PR the system should check the Material Master of every line item for the Material Type and MRP controller fields.
for the particular combination of material Type and MRP controller, the system should propose an account assignment which could be achieved but User Exit is required.
Please help.
Thanks in advance
and Regards
Yawar KhanHi Ravi,
Thanks for the reply, I will check back.
Regards,
yawar Khan -
Need a BADI/ exit for MIGO transaction
Hi,
I need a BADI / exit for tha transaction MIGO. My requirement is before displaying the materials in the item tab, check whether the user has authorization for that material or not. If he has no authorization, give error message. This should be done for all types of documents.
Please let me know if you need more information.
thanks,
Kishorehi,
You can have the authorization for the inventory management via authorisation..
Check the path: SPRO --> MM --> Purchasing --> Inv. management nad physical inventory --> Authorization management --> Maintain roles and assign users....
Regards
Priyanka.P -
I need a user exit to restrict total qantity of yeild, scrap and rework on
Hi friends
I need a user exit to restrict total qantity of yeild, scrap and rework on CO14 (Confirmation of Production Order Detail) not more then total qantity field in CO03 (Production Order Display). Please also mention if what I am asking is theoratically right and if possible please explain a bit from the functional point of view.
Regards,
Anurag JainI resolved it
-
ME51N / ME52N - need special user-exit
Hi there,
I'm looking for an user-exit oder BAdI in transactions for creating and changing purchase requisitions. I have to write the data of an item into the ABAP-memory EVERY TIME a new position is selected. The BAdI I found is only processed when a position has changed some data.
But I really need the user-exit every time a position/item is displayed, also in starting the transaction directly with a purchase requisition.
Thanks a lot.
I DON'T NEED A BIS LIST OF ALL EXITS IN THIS AREA - THX
Kind regards
JohnHi,
Try these...
Enhancement/ Business Add-in Description
Enhancement
MEREQ001 Customers' Own Data in Purchase Requisition
Business Add-in
ME_COMMITMNT_PARKING BAdI for Redefining Commitment Interface When Parking
ME_MEREQ_PARKING BAdI Purchase Requisition: "Hold"
ME_REQ_HEADER_TEXT Copy Header Text: Enjoy Purchase Requisition
No.of Exits: 1
No.of BADis: 3
Arunima -
Need a user exit to add custom partner function in sales order @ item level
Hi,
Need a user exit to add custom partner function in sales order at item level. Goto --> Item --> Partner.
Thanks,
ThiyagiHI Leo
To add a condition price for a condition type, this has to be assigned in the <b>pricing procedure</b>. For each condition type in a pricing procedure, we will have <b>access sequences</b>. If we follow this approch, the price is automatically extracted basing on the access sequences when condition records are maintained. For this, no coding is required and everything can be done by configuration by Functional consultant.
Naren is right to point out on the same.
If you need to change the price for a particular condition which already exists, you can go by <b>pricing routines</b>. Go through transaction <b>VOFM</b> for the same.
I advice you to discuss with your functional consultant and understand the requirement and then go for modifying accordingly.
Kind Regards
Eswar -
I need a user-exit or similar to SAPMV45A (VA02).
Hi ABAP, an older question cleared while a new one showed up.
I have to capture a text after hitting SAVE on the TA VA02.
The captured Text has to be stored, and somewhat later when the text has been replaced by the new materials text i have to replace it again with the original text it had before changing the material of the position.
probabaly i even need two user-exits, one straight after hitting save, and another short before code ends.Hi,
Please check this link perhaps it may help.
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
Regards,
Ferry Lianto -
Need a user exit to modify the quantity schedules in a sales contract
Hi,
I am using ECC 6.0 with IS OIL. Need a user-exit to update the quantity schedule(table OIA05) in the sales contract VA42.
I have a new field called timestamp in the table OIA05 which needs to be updated with the timestamp value.
I tried the user exit MV45AFZZ in USEREXIT_SAVE_DOCUMENT_PREPARE and USEREXIT_SAVE_DOCUMENT to update the values. But the new values are not being reflected. Can you please help me in this regard.
Thanks,
Best regards,
Ajiththat will allow me to append an initial line with <accit> pointing to the line. Therefore I just have to modify <accit> and the new line will then have my changes?
Yep, that is exactly it. So after the APPEND statement, simply fill the fields of the <accit>.
append initial line to im_document-item ASSIGNING <accit>.
<accit>-field1 = 'Blah'.
<accit>-field2 = 'Blah'.
Regards,
Rich Heilman -
Need a user exit for Export Control check in Sales Order fro VA01/VA02
Hi ,
I need a user exit for Export Legal Control process in Sales Order.since Ship-to country in the Sales Order is not always the ultimate destination country User Exit needs to be built in with following logic
1. Check to see if ultimate destination country field is maintained in Sales Order
2. If a value is maintained then for the Export control checks use ultimate destination country instead of the Ship-To country (step 1)
3. If no value is maintained then use Ship-To country as default
The user exit is called when the user creates or changes a Sales Order.
Can anybody help ?
ThanksHi,
Exit Name Description
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
SDAPO001 Activating Sourcing Subitem Quantity Propagation
<b>Reward points</b>
Regarsd -
Function module needed for customer exit variable need to use in Bex report
Hi Experts,
I have a requirement where i need to get Cummulative result between two interval periods.
If user gives single mandatory input value - 002-2009
for one Scenario:-
Project start Date untill Pervious year i.e December 2008
Where project start date will get from one of the field in my BW CUBE
can anyone help for the customer exit function code for this scenario. As i am into BI i dont have idea in ABAP.
Please help sample cod for this .
Thanks,
Anil.I had created one customer exit which had fullfill my requirement.
-
Need of User-Exit in the creation of Sales Order(VA01)
Hi,
In the creation of Sales Order, I need to Compare the Ordered Quantity and Confirmed Quantity. If the CQ is less than OQ I need to create one more line item with the same material for the rest of the quantity and send the request to Production order for the remaining quantity. For this I am unable to get the exact exit. Please help me in this regard ASAP.
Thank you.the following program are the user exit for billing.
we often use RV60AFZC and RV60AFZZ.
RV60AFZA
RV60AFZB
RV60AFZC
RV60AFZD
RV60AFZZ
RV60BFZA
For Sales order
Pricing, item addtion deletion
MV45AFZZ
First, I did not find documentation for the BADI either. But at the first glance the process of implementing it looks quite straightforward. I assume you run R/3 Enterprise (4.7). So, you should implement BADI 'BADI_SD_SALES' - this must be done in transaction SE19. In particular for the purpose of adding some additional items into sales document I would implement method SAVE_DOCUMENT_PREPARE. This method has changing table parameter FXVBAP of type VA_VBAPVB_T - it holds all the sales document items. Just add items of yours to it. Certainly, you have to fill all the appropriate fields carefully.
Hope this helps somehow.
In that case you should use USEREXIT_DOCUMENT_SAVE_PREPARE subroutine (form). As far as I remember it has no parameters. To add items to the sales document you should modify internal table XVBAP.
regards
vinod -
Help needed in customer exit code to exclude a value
Hi Gurus,
I need to use a Customer Exit Variable to read the values for a characteristic. Based on one indicator I have to include or exclude a value. I am trying to use the code as below. But, it is saying "AError for variable in customer enhancement ...".
Code
the variable is a multiple single values customer exit variable
zl_s_range-low = z_placc.
CLEAR zl_s_range-high.
if z_pl_ind = '1'.
zl_s_range-sign = 'I'.
elseif z_pl_ind = '2'.
zl_s_range-sign = 'E'.
endif.
zl_s_range-opt = 'EQ'.
APPEND zl_s_range TO e_t_range.
Please help me to solve the issue,
Thanks in advance,
Regards,
aarthiHi Uday,
Thanks for your response.
Below is the complete code.
WHEN 'ZV_CSS11'.
IF I_STEP = 1. "Before Pop-up
select * into table i_tp_tab_pl from /BIC/QZ_TP_PLAC
where /BIC/Z_TP_PLAC = '11' and
DATEFROM <= sy-datum and DATETO >= sy-datum.
if sy-subrc = 0.
LOOP AT i_tp_tab_pl.
clear zl_s_range.
z_placc = i_tp_tab_pl-/BIC/Z_PLACC.
z_pl_ind = i_tp_tab_pl-/BIC/Z_PGLA_IND.
zl_s_range-low = z_placc.
if z_pl_ind = '1'.
zl_s_range-sign = 'I'.
else.
zl_s_range-sign = 'E'.
endif.
zl_s_range-opt = 'EQ'.
APPEND zl_s_range TO e_t_range.
clear z_placc.
clear z_pl_ind.
ENDLOOP.
endif.
endif.
Thanks in advance,
Regards,
aarthi -
Need BADI or EXIT after Save of BP data
Hi,
I am replicating BP data from ISU to CRM. My data is coming smoothly. I need to do some enhancements in CRM side after BP data of ISU will get save into CRM.
I need a BADI or EXIT in CRM which will call after my ISU data will get Save into CRM.
Please help me to solve this issue....... !
Thanks & Regards,
Harkesh DangHi Harkesh,
To find the BADI do the following:
1. Go to the TCode SE24 and enter CL_EXITHANDLER as object type.
2. In 'Display' mode, go to 'Methods' tab.
3. Double click the method 'Get Instance' to display it source code.
4. Set a breakpoint on 'CALL METHOD cl_exithandler=>get_class_name_by_interface'.
5. Then run the transaction and save the BP.
6. The screen will stop at this method.
7. Check the value of parameter 'EXIT_NAME'. It will show you the BADI for that transaction.
Regards,
Saumya -
Need a User Exit for OCI Interface in case of Multiple Views
Hello Friends,
I need a help in finding the User Exit / BADI for passing the Catalog ID when you click on Catalog Button in Purchase Requisition , PM Order ( IW32) and Purchase Order.
1. We have number of Views and we need to implement Custom logic for releavant Catalog ID and same should be passed to third party System.
2. Creation of Custom Conversion module and how these will be called in MM.
3. How the sequence number will work in Assigment of Conversion module.
4.In case of Custom fields in RIHFCOM-CUSTFIELD1( Ex : EBAN-ESTKZ ) / RIHFCOM-CUSTFIELD2,how this will be mapped to Standard fields in SAP
Please help in this regard
Thanks in Advance.
Regards,
Kishore,Hi,
Exit Name Description
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
SDAPO001 Activating Sourcing Subitem Quantity Propagation
<b>Reward points</b>
Regarsd -
Need a user exit before material substitution executes in VA01, 02
My client has a unique need in SAP AFS. When entering an order, they have material substituion turned on and they want it to always execute. The problem is that we have a custom FM that must execute prior to material substitution - it will determine the material first and then material substitiion should use THAT material to detemine if it needs to substitue a material/grid. I have put break points in every exit I could find in the SAPMV45A exits. The one I would normally use is in MV45AFZZ for changes for VBAP, VBEP, etc. - but no matter what exit I put a break in for debugging (to see when it is called during order entry) - material substituion always executes first. yes, the exit for VBAK executes prior to material substition but that is at the header - I need the order lines. Also note that we are talking about the UPC/EAN tab - we are entering a UPC code and that gets the material/grids we need - this is not on the normal order line screen.
Does anyone have any ideas?
As always - points for helpful answers.
Thanks.
ScottOnly solution was a repair to SAP, so we found way for standard SAP to handle it.
Maybe you are looking for
-
Since the upgrade to 10.9 I have the most annoying issue when copying files. I have a secondary drive for media in which I keeo my media on / Samples / Video etc. I keep an exact copy on 2 external drives. 95% I can't copy the the new media across my
-
Premiere Elements 8 - "not compatible with Premiere Pro"?
I have installed, uninstalled, and reinstalled Premiere Elements 8 program twice. Updated to 8.01. When I save a "new project" file, then try to open it with the same program I created it with (Elements 8), it will not open the file and says: "Projec
-
Emails not displaying in preview pane
Lately, I have noticed that my emails are not always displaying in the preview pane. At first I thought that I needed to wait for what seems like ages for the adverts to load. However, even when the adverts ARE loaded it is hit and miss as to whether
-
HT3296 I dont have Original remote and reset apple tv
I dont have Original remote and reset apple tv how can I connect to settings now? The App dont see it after it set up with my ID
-
Video adjustments don't carry over into iDVD 08
I have been attempting to move my iMovie 08 projects over to iDVD via Share>Media Browser, and this works, but the brightness/contrast/saturation adjustments that I've made in my iMovie Project do not show up when I import the movie via the Media Bro