Need BADI or EXIT after Save of BP data

Hi,
I am replicating BP data from ISU to CRM. My data is coming smoothly. I need to do some enhancements in CRM side after BP data of ISU will get save into CRM.
I need a BADI or EXIT in CRM which will call after my ISU data will get Save into CRM.
Please help me to solve this issue....... !
Thanks & Regards,
Harkesh Dang

Hi Harkesh,
To find the BADI do the following:
1. Go to the TCode SE24 and enter CL_EXITHANDLER as object type.
2. In 'Display' mode, go to 'Methods' tab.
3. Double click the method 'Get Instance' to display it source code.
4. Set a breakpoint on 'CALL METHOD cl_exithandler=>get_class_name_by_interface'.
5. Then run the transaction and save the BP.
6. The screen will stop at this method.
7. Check the value of parameter 'EXIT_NAME'. It will show you the BADI for that transaction.
Regards,
Saumya

Similar Messages

I want to use Get Panel Image in Labview 5.0.1 and need details on how to save the BMP data generated

I am trying to generate an application that saves a copy of its front panel on completion. This is easy to do using an invoke node with Print VI to HTML but this does not work in an .exe format. I have seen elsewhere that you have to use the Get Panel Image method, but no details are supplied in LV 5.0.1 documentation of how to use the "image" data (1-D Unsigned Byte array) that is generated. I want to save this in a format that can then be read as a bitmap in any standard graphics package. Any assistance?

Hi,
If you'd upgrade to LV5.1 or 6 you could use the 'standard' vi's for this.
You need a VI called "Write BMP File.vi". It's not shipped with LV5.0.1.
This vi only uses 3 subVI's, so perhaps someone at NI can convert it and
send it to you (sorry, I won't, it's copywrited).
If you cannot get this VI anywhere, you'll need to figure out the BMP file
format yourself. It's not too complicated, but still could take some days.
Perhaps someone figured it out before LV5.1 was released.
Regards,
Wiebe.
"RDK" wrote in message
news:[email protected]..
> I want to use Get Panel Image in Labview 5.0.1 and need details on how
> to save the BMP data generated
>
> I am trying to generate an application that saves a copy
of its front
> panel on completion. This is easy to do using an invoke node with
> Print VI to HTML but this does not work in an .exe format. I have seen
> elsewhere that you have to use the Get Panel Image method, but no
> details are supplied in LV 5.0.1 documentation of how to use the
> "image" data (1-D Unsigned Byte array) that is generated. I want to
> save this in a format that can then be read as a bitmap in any
> standard graphics package. Any assistance?

User Exit or BADI for MIRO after save

Hi
I want to show a message in MIRO once the invoice document is create but I am unable to find a user exit or BADI after save of the MIRO transaction.
Please guide me in this aspect.
Regards

try to run the below codes in a new program,it can help you to find all user exits of a t-code:
TABLES : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
TABLES : tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir WHERE funcname =
tfdir-funcname.
SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name EQ enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
SELECT * FROM tadir INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct WHERE sprsl EQ sy-langu AND
tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

EXIT after save in VL02

Hello everyone,
Can any one let me know are there any exits or badis which trigress after saving the delivery into the database
I need a exit or badi which only triggress after the deliveery has been created at the last in vl02.
Regards,
Reginaldo

Hi,
try following: Before pressing save button in the transaction write down command "/h" to switch on debugger and in the debugger press shift + F5 to popup windows "Break-point at Statement" and write down "CALL CUSTOMER-FUNCTION".
With this the debugger will stop you everywhere where the user exit is called. With this way you can check if the exit you find is appropriate for you.
Regards,
Karol
P.S.: Another possibility is to use tcodes CMOD and SMOD and try to find user-exit via descriptions ...
Edited by: Karol Seman on Dec 21, 2009 7:55 PM

SAP CRM Which BADI is triggered after SAVE

Hi All,
I am working on one Interaction center requirement. Basically I would like to know which BADI isgetting triggered after hitting the save button in Complaint tab in CRM WEB UI. I need to enhance that BADI to create transaction link to my interaction record in transaction history tab.
I appreciate your help in advance..
Thanks,
Sar.

Hi Krishnan,
My requirement is we have complaint tab configured in SAP CRM interaction center. User can create complaints in CRM UI using complaints button. After creating complaint one button is active for the user like 'Create notofication' User will click on that button it basically calls Transcation laucher in ECC visa SAP GUI to create notification with reference to this Complaint. after creating the notifcation in ECC and after hiting the back button in CRM UI we have to create a link with notification created in ECC in transcation history tab in complaint.
As I am trying to update the documnet flow in my transaction launcher class I am getting the message saying that 'Order is locked my user id'. This is becuase as I am using the SAP GUI as TL the session is still open in CRM. So I am trying to create the link after hiting the save button for the complaint IN CRM Web GUI.
I am not sure which option is better in this scenario. Enhancing the Complaints Component or writing the code in BADI or using the update task in my transcation launcher class. I am not sure how frequently we can use the update tasks in CRM not user if it works for CRM UI scenarios.
Any suggestion are helpfull..
Thanks,
Sar..

BADI / User Exit after Saving of Business Partner

Hi Experts,
Is there a BADI / user exit that is triggered after saving / updating of Business Partner using transaction code "BP"?
We want to send a XML file thru ALE after creation/modification of BP. We are using CRM WinClient 4.0.
Thanks.

Hi Mikhail Khorpyakov,
Thank you very much for your reply. It was a helpful answer.
BUPA_GENERAL_EXPORT is triggered before database update of table BUT000 and other related tables.
Is there a BADI that is called after saving which contains general data of business partner?
Thanks in advance..

User exit/Badi in MIGO after save

hi all
I am trying to find a user-exit/BAdi in tcode MIGO.
This one should be called after saving the MIGO document.
Using this i want to put control over auto TO creation for some specific plants and storage locations.
Important thing is I am using version 4.6C.

Hi,
Please try the last one. This may suit.
For "Automatic TO creation (background processing)", the following user exits are available:
MWMTOAU1 Selection of requirements for automatic creation of orders.
MWMTOAU2 Reference number assignment.
MWMTOAU3 Selection of posting change notices for automatic creation of transfer orders.
Thanks and Regards
Guru

User Exit/ BADI in vf01 after save

Dear Experts,
My requirement is to send the mail alert to customer when the billing document is created( VF01 ). Request you to suggest
the relevant user exit/ badi for the same which is triggered when the save button is pressed.
Thanks in Advance.

Hi Farha.
Go to Ouptut type and the Driver Program related to VF01 output type ..
Go to se16>tnapr>enter output type already available-->see the Output type and form name.
Next go to se38> enter the Program name aatachned to Form> and at the end of the Pront privew write the code
to capture the spool Number and convert the spool data into internal table ( By using Function Module CONVERT_OTFSPOOLJOB_2_PDF) and next call the Funtion module SO_NEW_DOCUMENT_ATT_SEND_API1 SAPoffice: Send new document with attachments using RFC.
if you have problem go to se37-->enter CONVERT_OTFSPOOLJOB_2_PDF) and see where used list and find the Driver program how they are converting and sending the mail
Regards,
Prabhudas

User exit after save for purchase order create/change

After generating the purchase order no (ME21) i need to save that PO no into a custom table.....can u plz tell me such user exit where i can do this???

Hi,
BADI ME_PROCESS_PO_CUST.
1. Method to implement would be POST.
2. Method POST has parameter IM_HEADER which is in reference to IF_PURCHASE_ORDER_MM.
3. This reference has method GET_CONDITIONS.
4. call this method to get conditions data.
5. Make all the changes based on the logic and use method SET_CONDITIONS to change the values.
User exit will be MM06E005.
EXIT_SAPMM06E_012.
<b>Reward points</b>
Regards

Need Badi/user exit-migo-update batch classification

Hello all,
I need to update revision level and country of origin in batch classification tab in migo while posting GR.
I've already done using exit "EXIT_SAPLV01Z_014".
But this exit triggers only when classification tab is clicked in migo.
But i need to also update rev level and country of origin when GR is posted(Save button is pressed).
I tried MB_CF001,MB_CF001,MBCF0002,MBCF0005,MBCF0006,MBCF0007,MBCF0009,MBCF0010,MBCF0011
and badis
MB_DOCUMENT_BADI,CACL_VALUE_CHANGE.
Please someone help me
Thanks in advance

Hi Sriram,
If you want to add logic on particular action you need to search for exact BADI.
e.g.
As you are expecting that your code need to be trigger when user press SAVE button (Time of Posting) so at that time you need to check which BADI get trigger ( I am assuming that you have knowledge on how to search BADI)
List down the BADI name and check the methods. You will get exact method name in listed BADI's.
I am hoping that while checking badi you will find MB_MIGO_BADI just check and use method [POST_DOCUMENT] for your logic.
Also in User Exit you will see multiple function modules in component those function modules are behaving like PAI and PBO. so you need to find out whcih function module will trigger as per your requirement.
please find below link which will help you to understand how to search User Exit.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/0041d4e6-1e43-2e10-0db4-9386abe98fe6?overridelayout=t…
Please let me know if its work for you.
Regards,
Nikhil

User exit after save for purchase order?

After generating the purchase order no (ME21) i need to save that PO no into a custom table.....can u plz tell me such user exit where i can do this???

Hello,
Use the exit
EXIT_SAPMM06E_012
EXIT_SAPMM06E_013
VAsanth

I need Badi for PO Before save.

Hi Abappers,
i want Badi name for PO Before save.
Regards,
vani.

Hi,
To find the badi for a particular transaction goto TCode SE24 and give the class name as CL_EXITHANDLER and then display it. now double-click on GET_INSTANCE you will get some source code , put a break point on class name and give TCode on command field then debug . double click on class name and go on pressing F5, you willl get list of BADI's and according to your requirement choose the right one.
Second procedure:
Go to SE84, Enhancements< Business-addin< definition(double click) and give package name of particular transaction then you will get BADI's. Read documentation by going to SE18 or SPRO and choose the right one according to your requirement
I think ME_PROCESS_PO_CUST may satify your requirement.

Need to display footer after displaying some item data

Hi ,
I have the requirement that i need to display only 15 records in a page,If more records display 15 and then need to display footer and need to go next page to display next records.Every thing is ok but how to display footer data after 15 records in first page.Please help me on this.
Thanks,
Kumar.

Hi friend,
Its simple.
Just do the code as follows,
The logic flows like this,
table
Header
Main Area
     at the end of cells add alternatives
     In the alternatives check for loop count (you can use a variable and increment for each loop or you can use sy-index system
     field) check whether the count is 15.
     True break page using commands.
     So the control will come to footer and it will display the footer and the loop will continue.
Footer.
Else try to put the fotter like line type inside the main area and then display it after 15 records and do a page break.
Either of the two ways you can do this.
If you face any issues in this revert back to me i will help you.
Thanks,
Sri Hari

User Exit for MIGO after save

Hi
I want to print a label for the items in MIGO once the document is posted but I am unable to find a user exit after save of the MIGO transaction.
Please guide me in this aspect
regards
Grame Smith

Use this Badi.
MB_DOCUMENT_BADI
Read the documentation in Se18.

User exit for ML81N after SAVE

I need a User exit for Service Entry Sheet change after the user has Saved the release. I need to update a customized "Z" table when a Service Entry is released from ML81N. I need to ensure the Service Entry is saved with release status. The user-exits such as SRVESSR are triggered during creation of the Service Entry but not after Save. For e.g. if I used that exit to update my Z table, the Service Entry release may not have actually saved (say due to some error), but my Z table would have been updated. Is there a solution for such a requirement?? I saw some previous threads similar in request, asking for a User exit after SAVE, but it seemed to relate to WorkFlow.

hi ...
try to use MB_CF001 exit ....
The enhancement MB_CF001 includes a function module that is called up
immediately before the COMMIT WORK when a goods movement is posted.
All the material document data is passed on to this function module from
the following tables:
o   MKPF    (Material document header)
o   MSEG    (Material document items)
o   VM07M   (Update data)
This data can be passed on to other programs.
Note
The enhancement does not write any data to the material document, that
is, it is not possible to change material document data before the
update posting takes place.

Need BADI or EXIT after Save of BP data

Similar Messages

Maybe you are looking for