Need a sample SSRS report with 3 groupings

Where might I find a sample report with 3 groups that I could just download and modify for my purposes. I cannot get this to work right. I don't want any detail lines to show until all 3 groups have been chosen.
Of course I'd like to learn how to do this myself rather than just modifying someone elses report but gotta start somewhere.
I can do reports with one group with no problem.
The problem I run into with doing groups is that all the groups and detail lines are on the same line in the designer and that is incorrect. However there seems to be nothing I can do about it.

Hi cupboy1,
According to your description, you want to design your report as the screenshot your post and hide the detail row until select in top parent group. Right?
In this scenario, we can design the report as you have done by yourself, then delete the column (Label), but still keep the Label group, then add a column left of Disc, put the data field into appropriate textbox. You can get the same effect as your first
screenshot. And we can hide the detail rows and set them toggled by Artist. We have tested your case in our local environment. Here are steps and screenshots for your reference:
1. Create a table. Drag Disc into textbox, add parent group with header (group on Label) for Disc, add parent group with header (group on Artist) for Label.
2. Delete the column Label, add a column left of Disc.
3. Right click on detail rows, select Row Visibility. Set hide and toggled by Artist.
4. Save and preview. It looks like below:
Reference:
Row Visibility Dialog Box (Report Builder)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Similar Messages

  • How to create a SSRS report with SharePoint 2013 team site's calendar?

    Hi I have sp13 and SQL Data Rool (that brings up VS Shell 2010).
    I need to build a report where the top part is to have a SP Team site's calendar for up coming week. The 2nd half would be a table with data from that same site.  This report would then need to be embedded in a email that automatically sent to several
    users  on weekly basis.
    I have the table data report created form the SP list.  How can I get the calendar(display as a calendar that I see in the team site) on to the top part of this report? 
    Thank you.

    Please follow this article to write SSRS reports with data source as SharePoint list/calendars etc. All document libraries, list and calendars are derived from base list class so you can use any of this type as a data source
    http://www.mssqltips.com/sqlservertip/2068/using-a-sharepoint-list-as-a-data-source-in-sql-server-reporting-services-2008-r2/
    Once your SSRS report is developed, you have multiple ways to show it in SharePoint
    - upload to SSRS server and show in sharepoint in a page viewer web part or simply open it as a link in new window
    - configure SharePoint environment with integration to SSRS and upload report to SharePoint library. Display report in a web part page using SSRS web part.
    Moonis Tahir MVP SharePoint,MCTS SharePoint 2010/2007, MCPD.net, MCSD.net, MCTS BizTalk 2006,SQL 2005

  • SSRS report with tabular model – MDX query CoalesceEmpty function does not return the provided string value

    Hello everyone,
    I created following calculated member in MDX query. I am using it in one of the report parameter in dataset (single select dropdown list as report parameter).
    WITH MEMBER [Measures].[ParameterCaption] AS
    CoalesceEmpty([Customer].[National Account Code].CURRENTMEMBER.MEMBER_CAPTION,'None')
    I would like to display 'None' text at the top of the dropdown list values. So that when user selects 'None' then this parameter will not considered in MDX query else the selected National Account Code will be considered to filter report data. But,
    the above return blank/empty value for  [Customer].[National Account Code].&  member though I specified 'None' as text in CoalesceEmpty function. Any advice would be appreciated.
    Thanks, Ankit Shah
    Inkey Solutions, India.
    Microsoft Certified Business Management Solutions Professionals
    http://www.inkeysolutions.com/MicrosoftDynamicsCRM.html

    Hi Ankit,
    It seems that you issue had been solved in your another thread.
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/5a5becac-226f-428a-95b0-aaaa22733818/ssrs-report-with-tabular-model-create-a-dropdown-report-parameter-with-none-option-as-the-top?forum=sqlanalysisservices#0e51bf8c-a66c-4df5-a244-0147728fdfdb
    iif([Customer].[National Account Code].CURRENTMEMBER.MEMBER_CAPTION="","None",[Customer].[National
    Account Code].CURRENTMEMBER.MEMBER_CAPTION)
    I marked this reply as answer, it will benefit to other members who have the similar issue.
    Regards,
    Charlie Liao
    TechNet Community Support

  • SSRS reporting with sharepoint list using Distinct and Multivalue parameters

    i want create ssrs report with sharepoint list using ms-vs(2008). i want create Distinct multivalue parameters by using CAML query. There is any way we put CAML query where we use Distinct keyword and IN clause in CAML query... i hope all experts will
    understand my poor English... sorry for poor English.. plz help me

    Hi AsifMehmood,
    Per my understanding you have create an SSRS report with SharePoint list, now you don’t know to create the distinct parameters by using CAML query,  right?
    For the CAML language doesn’t have any reserved word (or tag) to set this particular filter to remove duplicate results, but we can use the custom code to do this function. I have tested on my local environment and we can do that by create one hidden parameter(Param1)
    to get all the values from the fields which will  add the filter and then create another parameter(Param2) to get the distinct values based on the Param1, we use the custom code to do the deduplication.
    Step by Steps information in below thread for your reference to create the parameters and the custom code:
    "How to get distinct values of sharepoint column using SSRS"
    Other similar thread for your reference:
    https://audministrator.wordpress.com/2014/02/17/sharepoint-list-add-distinct-parameter-value/
    If your problem still exists, please feel free to ask and also try to provide us more details information.
    Regards
    Vicky Liu

  • How to integrate SSRS Reports with Sharepoint

    Hi Friends,
    I just wanted to know the steps to integrate our SSRS Reports with Sharepoint.
    What are the prerequisite for integration of ssrs 2008 reports with sharepoint.
    Thanks in Advance...
    Regards,
    LuckyAbdul

    see
    http://technet.microsoft.com/en-us/library/bb326356(v=sql.105).aspx
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • SSRS report with tabular model - MDX query to filter parameter data based on Tuple value.

    Hello Everyone,
    I am working on SSRS report in which a tabular model is being used as a backend.
    I want to filter the report parameters which are dependent to other parameters. Like, country, state, and cities drop downs.
    All are multi-select parameters. I am using MDX queries to filter the parameters data.
    Based on selected one or more countries, the data of states needs to be filtered.
    The point is the text which is being displayed in state dropdown for each state name is combination of 3 different members.
    So, I created the following Tuple for the same and can see the expected display names in states dropdown.
    "("+
    [Location].[Code 1].CURRENTMEMBER.UNIQUENAME +","+
    [Location].[Code 2].CURRENTMEMBER.UNIQUENAME +","+
    [Location].[Descr].CURRENTMEMBER.UNIQUENAME +")"
    Now, when I would like filter the cities data based on selected one or more states, I am unable to pass the multiple Tuples (more than one selected Tuples) as parameter for cities dropdown.
    The following is my query for City parameter. It is working well when I select only one State from the dropdown.
    However, when I select multiple states, it is unable to convert the Tuple into SET in ELSE part of IIF condition specified in following query.
    Can anybody help me how to resolve the error that I am getting about STRTOSET function?
    Or
    Are there any other alternatives to achieve this requirement?
    Any help would be much appreciated.
    Query:
    WITH MEMBER [Measures].[ParameterCaption] AS [City].[City Business].CURRENTMEMBER.MEMBER_CAPTION
    MEMBER [Measures].[ParameterValue] AS [City].[City Business].CURRENTMEMBER.UNIQUENAME
    MEMBER [Measures].[ParameterLevel] AS [City].[City Business].CURRENTMEMBER.LEVEL.ORDINAL
    SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue], [Measures].[ParameterLevel]} ON COLUMNS ,
    [City].[City Business].Children ON ROWS
    FROM (
    SELECT ( STRTOSET(@State, CONSTRAINED) ) ON COLUMNS FROM [Model])
    WHERE ( IIF( STRTOSET(@State).Count= 1,
    STRTOTUPLE(@State, CONSTRAINED),
    STRTOSET("{
    ("+
    [Location].[Code 1].CURRENTMEMBER.UNIQUENAME +","+
    [Location].[Code 2].CURRENTMEMBER.UNIQUENAME +","+
    [Location].[Descr].CURRENTMEMBER.UNIQUENAME
    + ")
    }",CONSTRAINED )) ) CELL PROPERTIES VALUE
    Thanks, Ankit Shah
    Inkey Solutions, India.
    Microsoft Certified Business Management Solutions Professionals
    http://www.inkeysolutions.com/MicrosoftDynamicsCRM.html

    Hi,
    I used following dynamic query in expression of dataset of parameter and it works like a charm.
    "WITH MEMBER [Measures].[ParameterCaption] AS [City].[City Business].CURRENTMEMBER.MEMBER_CAPTION "&
    "MEMBER [Measures].[ParameterValue] AS [City].[City Business].CURRENTMEMBER.UNIQUENAME "&
    "MEMBER [Measures].[ParameterLevel] AS [City].[City Business].CURRENTMEMBER.LEVEL.ORDINAL "&
    "SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue], [Measures].[ParameterLevel]} ON COLUMNS , " &
    "[City].[City Business].Children ON ROWS " &
    " FROM [Model] WHERE ({"& join(Parameters!Location.Value,",") &"}) CELL PROPERTIES VALUE"
    Thanks, Ankit Shah
    Inkey Solutions, India.
    Microsoft Certified Business Management Solutions Professionals
    http://www.inkeysolutions.com/MicrosoftDynamicsCRM.html

  • What is the best way to create a SSRS Report with Header Data and its associated child data

    So I have Member Information...Member ID...Member Addressing...etc.. I want to display this in the top part of the report like...
    Member Name:
    Member ID:
    Member Address Line 1:
    And then below I want to report on all the claims associated with a Member ID that is chosen by the Parameter. Obviously the Claim Data will be in Table format. Do I necessarily have to associate the Member Information with the Claim Information or simply
    use the same parameter? And what is the best Toolbox item to use to display the Member Information on top?
    Any help or guidance is greatly appreciated by this newbie.
    Thanks for your review and am hopeful for a reply.
    ITBobbyP

    Hi ITBobby,
    According to your description, you want to display all Claim Data for each Member. Right?
    In Reporting Services, we can use a table to display those Claim Data and make them group on Member ID. If you want to display the Member Information, we can put the data fields on parent group level. Then we can use create a parameter to filter the Member
    ID we need. We have tested this scenario in our local environment. Here are steps and screenshots for your reference:
    1. Create a DataSet(DataSet1) which contains the data fields of Member and Claim.
    2. Create a table and drag the Claim data into the table.
    3. In Row Group. Right click on Details and add a parent group.
    4. Select Member_ID in Group by.
    5. Right click on the textbox of Claim data. Select Insert Row->Outside of Group-Above. Drag the MemberName into the inserted row.
    6. In Report Data, right click on Parameter-> Add Parameter.
    7. Type Member_ID in Name and Prompt, select allow multiple values.
    8. In Available Values, select get data from a query. Choose DataSet1, select Member_ID in values and label. You can also set this in Default Values if you need.
    9. Save and preview.
    Reference:
    Understanding Groups (Report Builder and SSRS)
    Report Parameters (Report Builder and Report Designer)
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Creating a SSRS report with dynamic overlapping images

    I have to create a report with the following requirement:
    1: The first page has some hi-res images of 8 different geometric shapes with text in it. The location of the images on the page will be static, however the fill color of image can be either green or grey.E.g. one box can be green for one user , for other it
    can be grey etc.
    2: Export the report in excel,pdf and word
    I am planning to use SSRS for this.
    I am planning to create the report with superimposed images, e.g. green palette shape and grey palette shape superimposed on each other .Depending on the selection made by the user, I want to "Send to Back" or "Bring to Front." Can I change
    the "Send to Back" or "Bring to Front" properties at runtime depending on parameters passed to the report?
    Also, I want the image path to be configurable, so that when business wants to change the text or color of the image, I do not need to redeploy the code. I can just change the image.
    how can I create the RDL such that the images are at the proper positions? DO I need to insert a tablix for proper positioning of the image?
    Any suggestions?

    Hi RachanaD,
    As far as I know, overlapping of item does not work in the soft-break renderers like HTML, Word and Excel. However, it is work in hard-break renderers like PDF or TIFF.
    In your case, we can insert text box in rectangle to work around the issue. We can insert an image in rectangle and another image insert in a text box. Then, put the text box in the rectangle.
    In SSRS, we cannot use parameter to control the location of image. However, we can use go to report action to work around the issue. Please refer to the steps below:
    Create two similar report, the difference between two reports is the location of these image.
    In the first report, add a text box fill with “Send to Back”.
    Add action “go to report” of the text box go to the second report.
    In the second report, add a text box fill with “Bring to Front”.
    Add action “go to report” of the text box go to the first report.
    Hope this helps.
    Regards,
    Alisa Tang
    If you have any feedback on our support, please click
    here.
    Alisa Tang
    TechNet Community Support

  • SSRS report with tabular model – MDX query how to get the sum and count of measure and dimension respectively.

    Hello everyone,
    I am using the following MDX query on one of my SSRS report.
    SELECT NON EMPTY { [Measures].[Days Outstanding], [Measures].[Amt] } ON COLUMNS,
    NON EMPTY { ([Customer].[Customer].[Customer Key].ALLMEMBERS) }
    HAVING [Measures].[ Days Outstanding] > 60
    DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS
    FROM ( SELECT ( STRTOSET(@Location, CONSTRAINED)) ON COLUMNS
    FROM ( SELECT ( {[Date].[Fiscal Period].&[2014-06]}) ON COLUMNS
    FROM [Model]))
    Over here, the data is being filtered always for current month and for a location that is being selected by user from a report selection parameter.
    I would like to get the count of total no. of customers and sum of the amount measure.
    When I am using them in calculated members it gives incorrect values. It considers all records (ignores the sub-select statements) instead of only the records of current month and selected location.
    I also tried with EXISTING keyword in calculated members but there is not difference in output. Finally, I manage the same at SSRS level.
    Can anybody please advise what are the ways to get the required sum of [Measures].[Amt] and count of [Customer].[Customer].[Customer Key].ALLMEMBERS dimension?
    Also, does it make any difference if I manage it as SSRS level and not at MDX query level?
    Any help would be much appreciated.
    Thanks, Ankit Shah
    Inkey Solutions, India.
    Microsoft Certified Business Management Solutions Professionals
    http://www.inkeysolutions.com/MicrosoftDynamicsCRM.html

    Can anybody please advise what are the ways to get the required sum of [Measures].[Amt] and count of [Customer].[Customer].[Customer Key].ALLMEMBERS dimension?
    Also, does it make any difference if I manage it as SSRS level and not at MDX query level?
    Hi Ankit,
    We can use SUM function and COUNT function to sum of [Measures].[Amt] and count of [Customer].[Customer].[Customer Key].ALLMEMBERS dimension. Here is a sample query for you reference.
    WITH MEMBER [measures].[SumValue] AS
    SUM([Customer].[Customer].ALLMEMBERS,[Measures].[Internet Sales Amount])
    MEMBER [measures].[CountValue] AS
    COUNT([Customer].[Customer].ALLMEMBERS)
    MEMBER [Measures].[DimensionName] AS [Customer].NAME
    SELECT {[Measures].[DimensionName],[measures].[SumValue],[measures].[CountValue]} ON 0
    FROM [Adventure Works]
    Besides, you ask that does it make any difference if I manage it as SSRS level and not at MDX query level. I don't thinks it will make much difference. The total time to generate a reporting server report (RDL) can be divided into 3 elements:Time to retrieve
    the data (TimeDataRetrieval);Time to process the report (TimeProcessing);Time to render the report (TimeRendering). If you manage it on MDX query level, then the TimeDataRetrieval might a little longer. If you manage it on report level, then the TimeProcessing
    or TimeRendering time might a little longer. You can test it on you report with following query: 
    SELECT Itempath, TimeStart,TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
    TimeDataRetrieval, TimeProcessing, TimeRendering, ByteCount, [RowCount],Source
    FROM ExecutionLog3
    WHERE itempath like '%reportname'
    Regards,
    Charlie Liao
    TechNet Community Support

  • Need help to develop report with column chart

    Hi
    I am new to SAP BO world.Could  anyone please help me to design report with column chart.Please guide me how to develop report for the following requirement.I am not aware of variance columns and variance labels.Please provide some guidance or some tutorials(for column Chart) so that I can complete the task. Please reply me as soon as possible.Waiting for reply.Thanks in advance.
    Type: Column Chart
    u2022     Rows: Banking Asset Margin (%)
    u2022     Start / End Columns: PY YTD Act(Prior year year to date); CY YTD Act(Current year Year to date)
    u2022     Variance Columns: # Var (CY-PY Act) for GOLM; Volume; Rate; Non Banking NII; Banking Volatility in NII; Banking Volatility in OOI; Fees/One Offs/Other; Volatile Items; Sophie
    u2022     Sub-total columns: PY YTD Underlying; CY YTD Underlying.
    u2022     Variance Labels: % Var (CY-PY Act) for Total Income and Underlying Income
    u2022     Sub-Total Labels: # Var (CY-PY Act) for Net Insurance Income; Banking Volatility; Other Operating Income
    Additional information
    u2022     Variance columns (bar) colours: Red = Adverse to Prior Year; Green = Favourable to Prior Year
    u2022     Columns to show values. Adverse values to be shown in red text in brackets. Favourable results in black text.
    u2022     All values in Black, but adverse to be shown below the bar.

    Hi,
    This type of question is almost impossible to answer over a forum .
    You need to work with your business to understand what these requirements mean in terms of data modelling and relationships between object entities.
    - Some of these metrics should be delegated to source, and calculated in the update routines to your datatargets (aka Cubes/Tables)
    - Others could be resolved in the semantic layer (Universe)
    - Other will be calculated in the presentation layer as local formulae or variables.
    whilst BusinessObjects is a fairly intuitive tool, it may be unreasonble to expect a new learner to deliver an advanced report with conditional formatting.
    Regards,
    H

  • SSRS Report with mutli select values in parameters

    Hi All,
    I am creating a SSRS report and displaying the result in tablix. I want to make the report to filter by multi select values from the parameters.
    I have 3 parameters. For all the three parameters, I have set "Default  Values" and "Available Values". Also, modified my result dataset to get the values from parameters using "WHERE ID = @Parameter1" (example) and so
    on..
    3 Parameters types:   1. Yes or No       
    2. Date          3. Values with NULL in the DB
    Problems:
    1. When I am passing the default values "Yes" "No" - it is throwing errors because default values is passed as Yes "AND" No instead of "OR" condition. The value stored in the DB wil have either Yes or No but not both.
    2. When I am querying the date values, it is a DateTime field in the DB. But I have queried like SELECT CONVERT(DATE, EXE_DATE) AS DATE FROM table which is giving only date in SQL but in SSRS displaying date with time.
    3. When I pull the list of values for third Parameter from SQL, it has some NULL values. When I try to use it in SSRS, it is not displaying the NULL value as select option in the list of values
    Any suggestions for the above three problems for SSRS with multi select values as filter will be helpful.
    Maruthu | My Blog

    Hi Maruthi,
    Regarding the three things:
    1.) I believe your first parameter is mutliselect , please convert it to single select.
    Steps: 
    a.) Select the parameter, right click and go to parameter properties
                    b.) Under General Tab in DataType section remove the checkbox for Allow Multiple Value.
    2.) Instead of returning as the date please return string. For example : 
    SELECT CONVERT(VARCHAR, GETDATE(),101)
    Here is the list of conversion : http://www.sqlusa.com/bestpractices/datetimeconversion/
    3.) As such there is no concept of null in SSRS. (Its a relational concept) . We do have nothing , which means empty. In Order to use null please select the Allow null option in the DataType section of the Parameter, This will add an checkbox for null in
    the report preview. Its developer job to handle the null values in there query.
    Regards Harsh

  • Issue while opening SSRS Report with Oracle as Datasource in Report Manager

    I deployed SSRS report in Report Manager but I am unable to generate that report. Am getting following error.
    Is it problem with datasource in report manager? I am not able to change the Data source type to Oracle. It is showing Microsoft SQL Server. How can I change it, no other options are coming except Microsoft SQL Server. Please help.
    An
    error has occurred during report processing. (rsProcessingAborted)
    Cannot
    create a connection to data source 'TEST_DS'. (rsErrorOpeningConnection)
    For
    more information about this error navigate to the report server on the local
    server machine, or enable remote errors

     When I deploy them in localhost, and try to run report in report manager, it is not showing any data source type in drop down list except MS SQL Server. I do not know why it is showing in BIDS and not in report manager!!!
    Hello,
    Based on my test, I can specify the data source type as Oracle after deploy the report to Report Manager and open the report Data source propertity page. If the report use the shared data source, you should check the specify data source at the Data Source
    folder. Please refer to the following screen shot:
    Regards,
    Fanny Liu
    Fanny Liu
    TechNet Community Support

  • SSRS report with PowerPivot datasource - 401 Unauthorized

    Hello together,
    I have a tricky issue and hope that you can help me:
    Problem: I want to build a Reporting Services Report with a PowerPivot datasource with Report Builder 3.0. When I try to access the datasource via Report Builder I get the error: The remote server returned an error: 401 - Unauthorized.
    The PowerPivot file lies on a Sharepoint 2013 with Kerberos authentification.
    Logs: Here are some sample log entries after getting the error:
    Token Cache: Could not find SPSite for 'sharepoint.com/_vti_bin/PowerPivot/secureredirector.svc/?DataSource=sample.xlsx'.
    Exception trying get context compatibility level: System.IO.FileNotFoundException: The site sharepoint.com/_vti_bin/PowerPivot/secureredirector.svc/?DataSource=sample.xlsx could not be found in the Web application SPWebApplication Name=sharepoint.com. 
    Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|user, ClaimsCount=118
    Notes: I tried some solutions from the internet, where the web.config from PowerPivot has to be changed. Also I saw that it could be Kerberos related, but no detailed information where to start as the other features are working fine. SPNs
    and Delegations are configured. And changing to NTLM is not an option as this is a multi-server platform. 
    I hope that you have another idea, where the problem could be.
    Kind regards, 
    Robin

    Has noone an idea?

  • Need to create a report with drop down option

    Hi,
    I have created a report with a simple query. Its a real time report.
    select host_name, target_name, instance_name from MGMT$DB_DBNINSTANCEINFO
    where target_type = 'oracle_database';
    It gives me a tabular report. It works fine. But it is a huge report about 1000 rows. We can see a particular number of rows per page. Thats fine.
    I need something else. I will select a particular target name from a drop down and the report will give me the result for the respective target only. Is that possible ? How to do that ?
    Thanks in Advance

    Hello,
    When you create your report, in the "general" tab, under Targets click on the first radio button named "A target will be selected by the report viewer when viewing the report" and under that choose target type="Database Instance".
    Then in your report query, use the predefined variable ??EMIP_BIND_TARGET_GUID?? to identify the target the report user will select at execution time; for instance:
    select host_name, target_name, instance_name from MGMT$DB_DBNINSTANCEINFO
    where target_type = 'oracle_database' and target_guid=??EMIP_BIND_TARGET_GUID?? ;
    regards,
    Noel

  • I need to make a report with graphs, and generate an exit file to word

    I have to do the acquisition for a laboratory and to make inmediately a report with graphics and a constant test about the method of the experimentation

    Probably your best bet is to use ActiveX and control Word from LabVIEW, this way, you can act as you were using Word directly, automating all the steps to create your report. Look for examples in the developer zone, although there will be more examples relating Excel, that can show you the way to act. If you need to use this intensively, i think NI has created a Word toolokit that you can buy.
    For any particular question, just ask.
    Good luck

Maybe you are looking for