Need Advise and Suggestions-Oracle 10g
Hi,
I have been working on databases as DB developer(mainly PLsql)--Oracle 10g
Recently,i have joined in a particular position where I have been asked to find out areas where
improvement is necessary / or areas where improvement or changes would help very much and also gradually implement all best practises avaialable.
So,could you please help me with these queries
(1)What are the most important areas that i can start with the database which would impact largely the entire database.How can i start with it? any steps or process
(2)I had once taken a report out for the expensive SQLs running.But that dint help much...because those SQLs were used temporarily on and off.
Similarly,what are the other points to be looked on.
(3)Things which can be replaced with the industry standarad better ones fully.
an example would be...like.."following a particular naming format,or coding style,etc
Thanks
Rohit
Hi Rohit,
This is a pretty huge subject. To start, I'd say you need to talk to the business. Talk to the users of the database, cause they are your customers. Get a clear understanding of the most critical business processes. Start with the most critical ones, and get performance profiles. How long do they take to run? What's the customer's perception of the process performance? If it's acceptable, move on to the next one. If it's not acceptable, you'll need to dig deeper. Look at each piece of the process. Where is the most time being spent? Can it be improved? This step will be a combination of process improvement and setting the correct expectation. Often, the user doesn't really know what is realistic in terms of performance. If you have a 2 billion row table that needs to get full table scanned, expecting a response time of a few seconds just simply isn't going to happen. You need to clearly convey that to the customer. On the other hand, at the same time, you should be on the lookout for real improvements. If you can re-write the SQL or add an index, and eliminate the FTS on that 2 billion row table, maybe a response time of a few seconds is actually realistic.
It's all about understanding the system, and understanding the customer's needs, and how they intersect. It will be an iterative process, and will take some time.
As to "best practices", I'm not a fan of them. Understand your system, understand your customer's needs, and understand how Oracle actually works. If you can master that, you'll be unstoppable. Note that many, many people, much smarter people than me, have spent a lifetime trying to master those three points... :-)
Good luck with your new job!
-Mark
Similar Messages
-
Restore and recover Oracle 10g database from tape.
I have a very basic question for restore and recover Oracle 10g database. Our envirnment settings are:
Oracle 10g on Unix, daily database and archivelog backup to Vista NetBackup server. Retention policy is 2. Old backup files are copied from NetBackup server to the tape for record keeping.
I want to restore a database to a point in time. Because our retention policy is setup to 2. The backup files I need have been copied to the tape. So I should ask SYSTEM ADMIN to copy the backup files back to NetBackup server disk or I can ask him to copy backup files to the Unix server that host my Oracle 10g database. Then I can use Rman to do restore and recover. Is this doable? I know normal procedure is to copy backup files I need back to NetBackup server disk, not directly back to database server. Please put your comments here as early as better. I do appreciate your kind help.853153 wrote:
I have a very basic question for restore and recover Oracle 10g database. Our envirnment settings are:
Oracle 10g on Unix, daily database and archivelog backup to Vista NetBackup server. Retention policy is 2. Old backup files are copied from NetBackup server to the tape for record keeping.
I want to restore a database to a point in time. Because our retention policy is setup to 2. The backup files I need have been copied to the tape. So I should ask SYSTEM ADMIN to copy the backup files back to NetBackup server disk or I can ask him to copy backup files to the Unix server that host my Oracle 10g database. Then I can use Rman to do restore and recover. Is this doable? I know normal procedure is to copy backup files I need back to NetBackup server disk, not directly back to database server. Please put your comments here as early as better. I do appreciate your kind help.For sure it is double work, To copy backup files on UNIX host.
Are you using catalog or nocatalog?
If the backup information is out of retention, Catalog them again also in netbackup.
So that you can able to restore database directly without copying those files to host. -
I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respondGenieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller! -
Step to export and import oracle 10g on AIX,LINUX
Hi ,
Plase any one can give nme the steps to be followed to export and import oracle 10g database from AIX to AIX and LINUX also.
Waiting for your response.
Thanks..You dont have to follow any special steps, Export and Import are same on all OS's.
-
Export and import Oracle 10G database
Hello all
Can anyone tell me once for all how can i backup oracle 10G database and restore it in other computer (export and import)
thanks alot
RonDo you can access to metalink?
If not, I copy an paste this doc's....
Doc ID: Note:10767.1
Subject: How to perform FULL System Export/Imports
Type: BULLETIN
Status: PUBLISHED
Content Type: TEXT/X-HTML
Creation Date: 18-APR-1994
Last Revision Date: 30-AUG-2002
Purpose
This article highlights some important points to consider when performing
a Full System Export and Import.
Scope and Application
It is intended to assist users performing FULL System Exports and Imports.
A Full System Export and Import is a useful way to replicate or clean up
a database. Please note the following guidelines when performing a Full
System Export and Import:
1. When performing the import, ensure you are pointing at the correct
instance. Always check values for the SID and two task driver before
proceeding.
*Note: On Unix systems, just entering a sub-shell, such as using
C-shell, can change the database that the import would work
against.
2. When possible, it is advisable to take a physical copy of the
exported database and the database you intend to import into before
starting the import. This ensures any mistakes are reversible.
3. NEVER run a FULL SYSTEM IMPORT on a machine that has more than one
database UNLESS you are 100% sure all tablespaces have been
pre-created. A full import will create any undefined tablespaces
using the same datafile names as the exported database. There are
situations where this is very dangerous:
-> If the datafiles belong to ANY other database, they will be
CORRUPTED. This is especially true if the exported database is
on the same machine, because its datafiles will be re-used by
the database you are importing into.
-> If the datafiles have names that clash with existing operating
system files.
4. When exporting, it is advisable to also produce a report showing
information you may need before / after the import:
-> List the tablespaces and datafiles
-> List the rollback segments
-> List a count, by user, of each object type such as tables,
indexes, etc.
This enables you to ensure that tablespaces have been pre-created
and to check the success of the import after it is complete.
5. If you are creating a completely new database from an export, remember
to create an extra rollback segment in SYSTEM, and make this available
in the init.ora file before proceeding with the import.
6. There are some versions of export that do not retain sequence numbers
correctly. It is advisable to select next_value for each sequence
after the export so that these can be checked after import.
Following these guidelines will help you to avoid major problems.
Doc ID: Note:174226.1
Subject: How To Copy an Oracle Database To Another Machine
Type: HOWTO
Status: PUBLISHED
Content Type: TEXT/X-HTML
Creation Date: 12-OCT-2001
Last Revision Date: 01-OCT-2003
goal: How to copy an Oracle database to another machine
fact: Oracle Server - Enterprise Edition
fix:
Pre-requisites: The copy is between 2 machines, both have to be on the same OS
and have to have exactly the same database version installed.
1. Make sure the database you want to copy was closed with a SHUTDOWN IMMEDIATE,
SHUTDOWN NORMAL or SHUTDOWN TRANSACTIONAL.
2. Copy init.ora and control files to create instance and be able to go in
mount mode. Check the init.ora for the locations where the controlfiles have
to be, if those locations are not valid on the machine put the control files on
different places and adjust the init.ora accordingly.
3.a. Copy the datafiles (all of them).
b. Copy the redo-logfiles (all of them).
4.a. (Unix only) Set the environment variables:
ORACLE_SID - set to the database name you wish to create
ORACLE_HOME - set to full pathname of the Oracle system home directory
PATH - needs to include $ORACLE_HOME/bin
b. (NT/2000 only) Do 'set ORACLE_SID=<SID>'
Use oradim to create the service for the instance. For more information
on oradim please refer to (the part that refers to creating a new instance):
Note:68720.1 Creating a new 7.3, 8.0, 8.1 Instance/Database
5. Use servermanager (check the name to use for your version of oracle) or
sqlplus (version 9i and above) to startup the database in mount mode.
Do
CONNECT INTERNAL/<PASSWORD>
then
STARTUP MOUNT
Then do a rename of the copied datafiles if they are not in the same path as on
the other machine. For all the files that are in the result of the query:
SELECT NAME FROM V$DATAFILE;
do
ALTER DATABASE RENAME FILE '<oldfullpath>\<filename>' to <
newfullpath>\<filename>';
6. Query the datadictionary for the old location of the redolog files using:
SELECT MEMBER FROM V$LOGFILE;
If the new place is not the same as the old do:
ALTER DATABASE RENAME FILE '<oldfullpath>\<redologfilename>' to &
lt;newfullpath>\<redologfilename>';
7. Now open the database:
ALTER DATBASE OPEN;
****************************************************************** -
Steps to export and import oracle 10g databse from AIX to AIX and LINUX
Hi,
I need the steps to export the oracle 10g database from AIX server to AIX server and LINUX server.
Please give me all the steps as this is my first exort an import activity.
thanks,For 10g there exist two ways to do so.
1) Regular exp/imp.
2) Data pump expdp/impdp.
As this is your first export and import activity, relevant concept understanding is mandatory for you.
Documentation Link
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14215/toc.htm
Read the chapters 1,2,3 (Data pump expdp/impdp) and 19 (regular exp/imp). Good luck. -
How to install and configure Oracle 10g Express Edition on Fedora 11?
Hi everyone!
I have recently installed Oracle 10g XE on my Laptop Gateway T-1625, which has Fedora 11.
I followed the install instructions on [http://st-curriculum.oracle.com/tutorial/DBXETutorial/index.htm] , and configured the server as explained, but something is wrong... When I try to go to the database home page http://127.0.0.1:8080/apex, I get "Failed to Connect" on Firefox 3.5b4... I don't think it's because of the Firefox version because it's proved to be very stable (for a beta).
I've search for similar issues on GNU/Linux and I found this thread in these forums: [ http://forums.oracle.com/forums/thread.jspa?threadID=915218&tstart=0] , but the solution is for Ubuntu 9.04, and if it's possible I would like to know a specific solution for Fedora 11.
I also tried to see the oracle server status with:
# /etc/init.d/oracle-xe status
And I got this....
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 25-JUN-2009 22:10:31
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=talos)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
I hope someone can help me out and guide me on the right direction. Thanks a lot!Hi again!
After your last post I realized that the dba group and the oracle user already existed.
#groupadd dba
groupadd: group dba exists
#useradd oracle -d /home/oracle -s /bin/bash -g dba
useradd: user oracle existsHowever, I finally assigned a password for that account and changed the ownership of the /usr/lib/oracle/xe
with the commands you suggested:
passwd oracle
chown -R oracle:dba /usr/lib/oracle/xeAfter this, I can log in as the oracle user but the SELinux showed a warning and the /usr/lib/oracle/xe
is treated as the oracle home, and no .bashrc file is located on this home. This is the SELinux warning:
SELinux is preventing gdm-session-wor (xdm_t) "write" to /usr/lib/oracle/xe (lib_t).
Details:
SELinux denied access requested by gdm-session-wor. /usr/lib/oracle/xe may
be a mislabeled. /usr/lib/oracle/xe default SELinux type is user_home_dir_t, but its
current type is lib_t. Changing this file back to the default type, may fix your problem.
File contexts can be assigned to a file in the following ways.
* Files created in a directory receive the file context of the parent
directory by default.
* The SELinux policy might override the default label inherited from the parent directory
by specifying a process running in context A which creates a file in a directory
labeled B will instead create the file with label C.
An example of this would be the dhcp client running with the dhclient_t type and
creates a file in the directory /etc. This file would normally receive the etc_t type due
to parental inheritance but instead the file is labeled with the net_conf_t type
because the SELinux policy specifies this.
* Users can change the file context on a file using tools such as chcon, or restorecon.
This file could have been mislabeled either by user error, or if an normally confined
application was run under the wrong domain.
However, this might also indicate a bug in SELinux because the file should not have
been labeled with this type.
If you believe this is a bug, please file a bug report (http://bugzilla.redhat.com/bugzilla/enter_bug.cgi)
against this package.
Allowing Acces:
You can restore the default system context to this file by executing the restorecon command.
restorecon '/usr/lib/oracle/xe', if this file is a directory, you can recursively restore using
restorecon -R '/usr/lib/oracle/xe'.
Fix command:
restorecon '/usr/lib/oracle/xe'I suppose the command #useradd oracle -d /home/oracle -s /bin/bash -g dba is where I can define the user's home, but if this user already exists how can I modify its settings?
is SELinux preventing the .bashrc file to be created? or what could be causing this?.
I hope you know how much I appreciate your help and want to thank you for your time. -
Need help for importing oracle 10G dump into 9i database
hi, Someone help me to import oracle 10G dump into 9i database. I'm studying oracle . Im using oracle 10G developer suite(downloaded from oracle) and oracle 9i database. I saw some threads tat we can't import the higher version dumps into lower version database. But i'm badly need help for importing the dump...
or
someone please tell me the site to download oracle 9i Developer suite as i can't find it in oracle site...I didnt testet it to import a dump out of a 10g instance into a 9i instance if this export has been done using a 10g environment.
But it is possible to perform an export with a 9i environment against a 10g instance.
I am just testing this with a 9.2.0.8 environment against a 10.2.0.4.0 instance and is working so far.
The system raises an EXP-00008 / ORA-37002 error after exporting the data segments (exporting post-schema procedural objects and actions).
I am not sure if it is possible to perform an import to a 9i instance with this dump but maybe worth to give it a try.
It should potentially be possible to export at least 9i compatible objects/segments with this approach.
However, I have my doubts if this stunt is supported by oracle ...
Message was edited by:
user434854 -
Need information related to oracle 10g standard / enterprise edition (diff)
Hi,
I had developed my application using oracle 10g enterprise edition and now i wanna to shift the entire thing to oracle 10g standard edition.
i Ha ve query on thiis point.
1) Is it safe to do so.
2) what are the difference between both the edition.
3) what are the restriction i can face if i am moving form 10g enterprise to 10g standard.
4) what are the steps i have to do to do the same.
5) risk,efficency,restriction and all the major difference.
If you can suggest me something, then it will be very helpful for me.
Thanks,
Anit
Edited by: Anit A. on Sep 5, 2008 12:24 AMHi Anit,
Is it safe to do so.ALWAYS check with your CSR for licensing deals, things change constantlt.
what are the difference between both the edition.EE has all the goodies! Here is my list of differences in SE and EE: http://www.dba-oracle.com/art_so_oracle_standard_enterprise_edition.htm
what are the restriction i can face if i am moving form 10g enterprise to 10g standard.No replication, no Data Guard, no stored outlines, no MV's . . . .
what are the steps i have to do to do the same.Just install SE, point your $ORACLE_HOME to it and bounce
Hope this answers your question . . .
Donald K. Burleson
Oracle Press author
Author of "Oracle Tuning: The Definitive Reference":
http://www.dba-oracle.com/bp/s_oracle_tuning_book.htm -
Installing and Running Oracle 10g Express Edition on Microsoft Vista
My computer is running on Microsoft Vista.
I downloaded Oracle 10g Express Edition for Vista.
I ran the setup.exe. Everything went well there.
But, when I open the SQLPlus program, a window prompts me to enter my username, password and host string.
Can someone please tell me what it is expecting for these fields? I am using the same username and password I used to create my Oracle account.
But what is the host string?
Appreciate it.
Thanks.This may help
http://sites.google.com/site/delphibasics/home/delphibasicsarticles/installingoracledatabase10gexpresseditiononwindowsvista
Check out the section "Access demonstration data"
Also this is not the best place to post a question of this nature. This might be better :
Database Installation
Best Regards
mseberg -
How to install and integrate oracle 10g and 11g Warehouse with EBS???
Hi,
We are using EBS r12 (12.0.6) and database 12.2.0.3.
Please give us the Doc Id's for installing and confihuration oracle Data Warehouse with EBS r12?
thxHi;
We are using EBS r12 (12.0.6) and database 12.2.0.3.you mean db version is 10.2.0.3 right? Coz there is no version like start 12 yet!
Please give us the Doc Id's for installing and confihuration oracle Data Warehouse with EBS r12?Check below:
Oracle E-Business Intelligence Embedded Data Warehouse Implementation Guide Release 4.1 [ID 246156.1]
Embedded Data Warehouse White Papers [ID 149406.1]
Embedded Data Warehouse Library [ID 149404.1]
Regard
Helios -
Need help regarding upgrading Oracle 10g Forms to Oracle 11g Fusion Middlew
Hi All,
I am trying to create a workshop on a VM for showing the migration / upgrading of Oracle Forms 10g to Oracle 11g FMW using the Upgrade Assistant tool available in <ORACLE_HOME>/bin/ua.bat.
As per my understanding of pre-requisites:
1) I need to install Oracle SOA Suite 10g on my VM.
2) I also need to install Oracle SOA Suite 11g on my VM.
3) I need to install Oracle Forms/Reports Services 10g on my Oracle SOA Suite 10g installation.
4) I need to run Oracle Forms/reports installer on my Oracle SOA Suite 11g installation.
5) I need to run upgrade assistant tool on my VM to upgrade my form from source(Oracle SOA Suite 10g) to destination(Oracle SOA Suite 11g). Is it mandatory for this migration that I should have Oracle SOA Suite 10g and Oracle SOA Suite 11g on the same system ?
Having all these software installed on one VM would be difficult. So just wanted to check can I avoid any software to install on VM ?
If there is any alternative suggestion then please let me know.
Regards,What do you want to do with the SOA-suite? At least for Froms10G is is not necessary.
-
First time preparing for OCP Help me to suggest oracle 10g exam numbers
Hi All,
I want to prepare first time OCP in 10 g .Please suggest me which paper .
from 10g I need to prepare
RegardsGood.
For more information on Exam Details, please take a look at the below link.
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=151
Moreover, from now onwards, if you have any Certification (OCP) doubts/queries, you can post in the relevant Oracel Forums, below is the link for that.
Oracle Certification Program
Regards,
Sabdar Syed. -
How to import and export Oracle 10g XE in Ubuntu
Hello everyone,
I'm a Linux (Ubuntu) user, I need to import my *.dmp* file in Ubuntu.
Can someone help me, how can I do this and also how can I export?
Thanx in advance.
TalhaHi,
These might help
https://help.ubuntu.com/community/Oracle10g
http://www.debian-administration.org/articles/430
http://www.oracle.com/technology/tech/linux/install/xe-on-kubuntu.html
http://www.oracle.com/pls/xe102/homepage
You need set environment variables correctly
This might help with that and some other minor things
http://ubuntuforums.org/showpost.php?p=7838671&postcount=4
And XE comes with Apex version is 2.1.
You can upgrade it
http://www.oracle.com/technology/products/database/application_express/html/3.2_and_xe.html
Get SQL Developer, it is nice tool work with database
http://www.oracle.com/technology/products/database/sql_developer/index.html
Br,Jari
Edited by: jarola on May 3, 2010 12:37 PM
links corrected -
Looking for a better graphic card. Need feedback and suggestion
I'm looking to get a different graphic card but I'm not sure really what to buy,
These are my computer specs
Computer: Gateway Gt5228 Media center edition
OS: Windows Xp
Current graphic card: NVIDIA GeForce 6100 PCI Express Slot avaliable
I was wondering what would be a good graphic card that is a good significant upgrade. I'm looking for one that has a significant increase over what I have right now, it doesn't necessarily have to be the best out there.
I want to be able to play a game call Diablo 3
These are the High and low Performance, that the game will run with.
Supported - High PerformanceNVIDIA AMD/ATI INTEL
GeForce GTX 590
Radeon HD 6990
N/A
GeForce GTX 580
Radeon HD 6970
GeForce GTX 570
Radeon HD 6950
GeForce GTX 560 ti
Radeon HD 6870
GeForce GTX 550 ti
Radeon HD 6850
GeForce GTX 480
Radeon HD 6790
GeForce GTX 470
Radeon HD 6770
GeForce GTX 465
Radeon HD 6750
GeForce GTX 460
Radeon HD 5970
GeForce GTS 360M
Radeon HD 5870
GeForce GTX 295
Radeon HD 5850
GeForce GTX 285
Radeon HD 5830
Geforce GTX 280
Radeon HD 5770
Geforce GTX 280M
Radeon HD 5750
GeForce GTX 275
Radeon HD 4870
GeForce GTX 260
Radeon HD 4870
Quadro FX 5800
Radeon HD 4850
Radeon HD 4800
FirePro 3D V8750
FirePro 3D V8700
FireStream 9370
Firestream 9350
FireStream 9270
FireStream 9250
Supported - Low PerformanceNVIDIA AMD/ATI INTEL
GeForce 9500 GT
Radeon HD 3650 AGP
HD Graphics 4000
GeForce 9400 GT
Radeon HD 3650
HD Graphics 3000
GeForce 9300 GS
Radeon HD 3600
HD Graphics 2000/1000
GeForce 8800 GS
Radeon HD 3470
GeForce 8600 GT
Radeon HD 3450
GeForce 8600 GTS
Radeon HD 3430
GeForce 8500 GT
Radeon HD 3200
GeForce 8400 GS
Radeon HD 3100
GeForce 8400
Radeon HD 2600 XT AGP
GeForce 8300 GS
Radeon HD 2600 XT
GeForce 8300
Radeon HD 2400 Series
GeForce 8200
Radeon HD 2350
GeForce 8100
Radeon HD 2100
GeForce 7950
Mobility Radeon HD 4530
GeForce 7900
Mobility Radeon HD 4330
GeForce 7900 GS
Mobility Radeon HD 2600 XT
GeForce 9500M GS
Mobility Radeon HD 2600
GeForce 9500M G
Mobility Radeon HD 2600
GeForce 9400M
Mobility Radeon HD 2400 XT
GeForce 8600M GT
Mobility Radeon HD 2400
GeForce Go 7900
Mobility Radeon HD 2300
GeForce Go 7800
Mobility Radeon X2300
Quadro FX 5500
Radeon X1950 Series
Quadro FX 4500
Radeon E2400
Quadro FX 4000
FirePro 3D V7750
Quadro FX 3500
FirePro 3D V5700
Quadro FX 3450
Any help would be greatly appreciated
Which ones can i use with my computer but without the need to buy nothing else.
thank you
-GeoHonestly I wouldn't spend too much trying to upgrade your computer. It has an aging dual core Athlon processor, and only 2GB of RAM. Even with the highest top of the line card, with that CPU/RAM setup, your computer is probably going to struggle to run it.
Hate to be the bearer of bad news.
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.
Maybe you are looking for
-
I have moved my music to my new mac air but now it won't sync with my ipod or my iphone 4s
I have transferred mymusic to my new mac air from an acer laptop via an external hard drive and it's all there on the mac but now itunes won't sync with my ipod touch or my iphone 4s. With the ipod it says 'iTunes could not connect to this iPhone. Co
-
Installation problem in Windows 2000
Hi, When i am trying to install J2EE 1.4 SDK on my Windows 2000 Ver5 an error message "You are currenty attempting to install J2EE 1.4 SDK on an unsupported platform and/or patch level..." is being shown.Can anyone help me out, does J2EE 1.4 support
-
5 error while checking job status
Hi, We are getting the following error when we are trying to check the status of the process chain through FM 'RSPC_API_CHAIN_GET_STATUS': 5 error while checking job status. The real scenario is we are using an abap screen with a button on it. when t
-
Google SketchUp8 crashes after start up in wine
Hello everyone, I hope I am in the right part of the forum. First of all I have to apologies for my bad English. English isn't my birth tong that's why i have a lot mistakes in here. Sorry about that. But now to my real problem. I installed Arch lin
-
I have an ibook g3 with 640 memory and 30g hd. I think it has a dvd player as I can watch movies on it. I also have an imac intel and the discs for Tiger for the itel mac. does anyone know if Apple will send me the discs for the ibook since I already