Need an opinion about FieldPoint RT Communication

The system I am controlling with compact Field Point consists of the chamber (initially filled with air), turbo pump (below), valve on the right of turbo pump, scroll pump below.
The I/O boards installed in FP are : DO-403, RLY-421, DI-301, DI-330.
I use:
- DO-403 to close and open the valve
- RLY-421 to start/stop turbo pump
- DI-301 to read the signal from multi-gauge (high/low) for 3 set points
- DI-330 to read signal from turbo pump (high/low) that tells me if the pump is in starting/normal operation
The process starts by turning the Scroll pump On and when the pressure in the pipe between turbo pump and scroll pump drops below setpoint 1 the Chamber2.vi will open the valve. The scroll contin
ues to pump the air out and when the pressure drops below set point 2 I start the turbo pump. Now both pumps are pumping the air out together and the pressure will start to decrease rapidly.
The Chamber2.vi is to automize the process of pumping the air put for this system.
I used RT Comm. Wizard and it built three VIs for me.
You can choose to do the same I believe and see what they look like.
I have few things to clear out:
-How does the VI look like from the Real Time point of view? Are there any bigger problems in a way I built it?
-My goal is to build stand-alone application that will be downloaded to FieldPoint. What would be the next step for me to do after I have made a NP VI, TC VI and Host VI? DO I download only Normal Prior. VI to the FP?
-One problem I had with RT Comm. Wizard is that the indicators: valve, pipe and scroll pump are not shown in the list of controls/indicators that you can select to be replaced with RT FIFO. Why is that?
Any suggestions, inputs
, critics will be greatly appreciated.
Thanks,
Pedja
one more thing...I have tried to build library with main VI and all subVIs together so that I can attach and post one single file only but I had some problems.
Can you instruct me on how to do this?
Attachments:
Chamber2.vi ‏144 KB
DIs301&330.vi ‏22 KB
Relay421.vi ‏31 KB

Coop,
Please see the following discussion forum thread regarding your question:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000043E20000&UCATEGORY_0=_50_%24_6_&UCATEGORY_S=0&USEARCHCONTEXT_QUESTION_0=Coop&USEARCHCONTEXT_QUESTION_S=0
Ames
Application Engineering
National Instruments

Similar Messages

Need you opinion about my website

Hello I need an opinion about my new website:
http://www.logoarena.com
thanks!

I think so cool & excellent !!
Please, comment my web site
相続税　所得税　法人税

Need your opinion about Satellite A110-153

Hi,
I??m new here and I??m looking for a notebook. The A110-153 sounds interesting for me.
Could anyone give me more information like reviews what are the + and - of the product?
Also I saw on a website that has this notebook has 2 hard discs. Is this true? I can't find it anywhere (toshiba.com). Also I find this odd, I never heard that a notebook has 2 hard drives or disks.
It??s a pity that this notebook has an integrated video card I think.
What I want to do with the notebook is the following:
- Internet
- Ms office
- working with pictures (I have a digital photo camera and soon a digital video camera)
- A little Photoshop
What??s your advice?

Hi
I have found some pictures of the Satellite A110-153 and in my opinion the notebook looks very nice
The notebook supports Intel Core Duo (Yonah) processor T2050 1.6GHz and you can upgrade the memory up to 4GB
I dont know where you found the information about 2 HDD but as far as I know there is only one 100GB HDD installed.
But I found one disadvantage. The notebook support s only a Intel 945GM 8-128 MB shared memory graphic card.
But dont worry, Its strong enough for working with picture and MS office applications.

Need detail information about Data Cleanse Transform.

Hi Every One,
I Need detail information about Data Cleanse Transform.
1. what is Local Cleansing Packages?
2. what are Directories and Dictioneries.
3. Data Cleanse Transform INPUT , OPTIONS, OUTPUT tabs and usage.
4. Details on Transform Input Field name in Data Cleanse INPUT tab.
5. What is PARENT_COMPONENT,FILED_NAME,FIELD_CLASS,CONTENT_TYPE in Data Cleanse OUT POT TAB.
I tried using "EnglishNorthAmericaDataCleanse" transform with NAME_OR_FIRM_LINE1. When I ran the job I got below warning message and my job was success full nut status it shown as failed.
Warning message:
"Trasform Data Cleanse is unable to retrieve cleansing packages from Cleansing Package Builder. Only local cleansing packages are available. Info: Unable to log on: Could not connect to server d184932040.sng1.attens.net:6400. Please check that the server name is correct, and that the server is running. "
Please make me understand, why did I get above message.
Thanks in Advance ...

Hello,
Cleansing package is a reference file that contains content and rules around person, firm, title, phone data and so on. Cleansing package used to be referred to as dictionaries. Directories are usually referred to address reference data or address directories. The input, output and option tabs are similar to other Data Quality transforms. For detail information on what each of the input fields and output fields are and how the options work can be found in the Data Services’ Designer Guide (http://help.sap.com/bods).
The warning message you are getting is stating that Data Services is not able to connect to the server to check to see if you have made modifications to the PERSON_FIRM cleansing package. You are not required to make any changes to the PERSON_FIRM cleansing package, but can change rules or content based on your organizational rules. If you want to make changes you will need to install SAP Information Steward. If you would like to install SAP Information Steward you can find documentation for installation on the Help Portal, http://help.sap.com/bods, along with some great Videos.
You can also find some great Data Services Product Tutorials on the SAP Community Network, at http://scn.sap.com/docs/DOC-54115.
Thank you,
Lynne Lintelman

I need some info about the Document Class.

Hi,
I need some information about the Document Class, can anybody
tell me where I can find it.
thanks

Emad Zedan,
> I need some information about the Document Class, can
> anybody tell me where I can find it.
The concept of the document class was introduced in Flash
CS3. What it
does is allow you to optionally associate a custom AS3 class
with your FLA
in the Flash authoring tool. Your document class effectively
*becomes* the
main timeline. This is your chance to influence the
underlying behavior of
the MovieClip or Sprite instance that serves as the
foundation for your SWF.
If you don't associate a custom document class with your
FLA, the FLA is
associated automatically with a default document class called
MainTimeline,
which extends MovieClip.
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."

What kind of cert is needed for Client to MP/DP communication.

Hi,
What kind of Certificate is needed for Client to DP/MP communication? I know what the documentation says about setting up a Client cert and setting up auto enroll however, we are not able to setup auto enroll in a couple domains so we are trying
to figure out how to get certs on these other machines.
Will any cert listed in the personal store of the Client and the MP/DP work?
How does Config Manager pick the cert it needs to use for this on the CLient side and MP side?
Thanks in advance.
Thanks Lance

We manually created a cert for a machine using the Config Manager Client template. THis was the same template used to create the config manager client cert that we installed on the site system.
So both the Config Manager server and Client have a cert created with this template (and therefore show the same template id).
The client and config manager server have root certificate in the trusted root store from the same CA.
in our ccmmessaging.log file on the client we get the following error.
Certificate [Thumbprint ksdjfskfjdsfksjfskdfjskdjfskjfskdjfklsjdfslkfjdslkf] issued to 'machinename' doesn't have private key or caller doesn't have access to private key.
in the certificates MMC it shows for the certificate with the above thumbprint..
you have a private key that corresponds to this certificate.
What are we missing?
Thanks Lance

Do I need to worry about this?

It has been an interesting few months with my one year old 13" MBP. Lots of spinning beach balls followed by a hard drive crash. Apple was quick to replace the hard drive. And as I had everything backed up on Time Machine I was able to quickly restore everything.
All was good for a few months until the beachballs, freezes, and finder crahes began again. Made another trip to the Genius bar where they thought I might have re-downloaded a corrupt file from Time Machine. They cleaned my temp files and caches and things seemed to work well in the store.
When I returned home I had the same issues. They had prepared me for this. So a system restore, a re mount and re start of time capsule and everything seems to be working well. Speedy, no crashes, no freezes.
The issue is that I wanted to double check so I ran disk verify and permission verify on the disk utility. To my surprise it came back with a LONG error log as below. So long, I could not get it all into this post. But it seems like a recurrent message. Do I need to worry about any of this? What should I do next, if anything? Thanks in advance for your response.
Verifying volume “Macintosh HD”
Performing live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
Invalid volume file count
(It should be 624512 instead of 624514)
Invalid volume directory count
(It should be 172781 instead of 172779)
The volume Macintosh HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
Verify permissions for “Macintosh HD”
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUAdvanced.nib/keyedobjects.nib", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUAdvanced.nib/keyedobjects.nib", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUAssistant.nib/keyedobjects.nib", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUAssistant.nib/keyedobjects.nib", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUDocument.nib/keyedobjects.nib", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUDocument.nib/keyedobjects.nib", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUDrives.nib/keyedobjects.nib", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUDrives.nib/keyedobjects.nib", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUStatisticsPanel.nib/keyedobjects.nib ", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUStatisticsPanel.nib/keyedobjects.nib ", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUTaskSheet.nib/keyedobjects.nib", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUTaskSheet.nib/keyedobjects.nib", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUTasks.strings", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUTasks.strings", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUWirelessPanel.nib/keyedobjects.nib", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUWirelessPanel.nib/keyedobjects.nib", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/APPanels.nib/keyedobjects.nib", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/APPanels.nib/keyedobjects.nib", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AUFirmwareDownloader.nib/keyedobjects.n ib", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AUFirmwareDownloader.nib/keyedobjects.n ib", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortAssistant.strings", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortAssistant.strings", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortErrors.strings", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortErrors.strings", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortSettings.strings", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortSettings.strings", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortTimeZones.strings", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortTimeZones.strings", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortUtilityHelp/AirPortUtilityHelp.h elpindex", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortUtilityHelp/AirPortUtilityHelp.h elpindex", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortUtilityHelp/AirPortUtilityHelp.h tml", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortUtilityHelp/AirPortUtilityHelp.h tml", should be -rw-r--r-- , they are -rw-rw-r-- .

Scott Adelman wrote:
The issue is that I wanted to double check so I ran disk verify and permission verify on the disk utility. To my surprise it came back with a LONG error log as below. So long, I could not get it all into this post. But it seems like a recurrent message. Do I need to worry about any of this? What should I do next, if anything?
Verifying volume “Macintosh HD”
Invalid volume file count
(It should be 624512 instead of 624514)
Invalid volume directory count
(It should be 172781 instead of 172779)
The volume Macintosh HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
You definitely need to repair your disk. If you can, boot from something else, such an external disk or the system discs that came with your Mac. You can also cause the disk to be repaired by booting into "Safe Mode": http://support.apple.com/kb/ht1564 . If that process can't repair your disk, you may need one of the more-powerful disk utilities such as Disk Warrior.
Verify permissions for “Macintosh HD”
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUAdvanced.nib/keyedobjects.nib", should be 0, group is 80.
You can ignore most permissions repair messages:
http://support.apple.com/kb/TS1448

Everything you need to know about Foxtel Go

Foxtel on T-Box customers can self register Foxtel Go on 2 devices per Foxtel on T-Box subscription. You are able to view content on 1 of the 2 registered devices. The T-Box device will automatically be registered on your behalf and cannot be deregistered. You can change the device they have registered once per calendar month.
To change a registered device you must log into the Foxtel Go app. As a Foxtel from Telstra customer please use your Foxtel My account details. As a Foxtel on T-Box customer please log in with your primary (i.e. the first username created and linked to your account) BigPond username and password.
Once in the app go to the settings icon and choose 'manage my devices'. Within this section of the app you will be able to select de-register for the device you wish to change. To register, download the Foxtel Go app and log in. You will be prompted to register the device.
Remember you can only change one device once per calendar month. If you are still able to make a change, you will be advised of the number of device registrations left this month.
If you recently registered your T-Box, you should have access to Foxtel Go within 1 hour. If you are experiencing errors please try closing the Foxtel Go App and logging in again. If you are still unable to access any content please contact us via Telstra 24x7 or Telstra Technical Support on 13 22 00
If you swap your Foxtel on T-Box service to a new device, your Foxtel Go service is not affected as it is associated to your BigPond username and password, and not the T-Box device.
When trying to make a second device change within a month the de-register' button will be greyed out, preventing the change.
Current channel rights only allow Foxtel Go to be registered on 3 devices per Foxtel Account. For Foxtel on T-Box customers, the T-Box counts as your 3rd device.
The parental control function is specific to Foxtel Go and managed in the app via the settings icon. To access parental control:
Go to the settings' icon in the app (top right)
Access parental controls'
Choose which classifications you'd like to restrict
All R-rated content is automatically blocked, but you can personalise your restrictions for other ratings. To do this go to Settings in the Foxtel Go app, turn on Parental Controls and restrict the classifications you would like to block. If this is the first time you do this you'll be prompted to set a 4 digit PIN specifically for Foxtel Go. You can use this PIN to change your parental controls in the future. This PIN is only applicable to the Foxtel Go app. For Foxtel from Telstra customers, the PIN is not the same as you use on your IQ or Set Top Box, and you will be required to setup a new PIN to restrict content on Foxtel Go. For Foxtel on T-Box customers, the PIN is not the same as you use on your T-Box, and you will be required to setup a new PIN to restrict content on Foxtel Go.
Foxtel Go content is unmetered with Telstra BigPond Home Broadband services. With other internet service providers this will be offset against your data plan.
If you use Foxtel Go on your device with any 3G/4G telecommunications service provider, including Telstra, usage isn't unmetered and you will incur data charges when using Foxtel Go. The below list provides an indicationof the data you will use per device on the various app settings, based on watching an hour of TV. To view your settings go to the 'settings' icon in the Foxtel Go App, turn on 'video settings' and choose your preferred quality:
3G Phone/Tablet Best: 320 MB per hour / Low: 170 MB per hour
Wi-Fi Phone Best: 420 MB per hour / Low: 320 MB per hour
Wi-Fi Tablet Best: 720 MB per hour / Low: 320 MB per hour
Wi-Fi PC/Mac Best: 1310 MB per hour / Low: 470 MB per hour
The size of each episode or Movie on Catch up TV can be found on the Synopsis tab.
You can use Foxtel Go at a Wi-Fi location or a personal hotspot when you are in Australia provided you have an internet connection. Some locations offer Wi-Fi hotspots where you can log onto the internet for free. e.g. McDonalds, Starbucks, etc. Any data charges incurred are charged to the business and not to you. When connected to Wi-Fi, you'll see a Wi-Fi symbol on your device.
Foxtel from Telstra customers with a Foxtel iQ or iQHD set top box can Remote Record and send a channel change to their set top box. Unfortunately this functionality is not available to Foxtel on T-Box customers.
You can pause and rewind the last 30 minutes of Live TV, even if you've just changed to that channel. Due to device restrictions users of Samsung Android devices are unable to use this feature.
Foxtel Go is a streaming video service. Streaming means that images and sound are delivered live to your device to view when you press Play, rather than being downloaded to your device to view at a later time.
Games you'd normally see on Foxtel from Telstra or Foxtel on T-Box on FOX SPORTS 3 are broadcast on Foxtel Go on the Footy Play Plus channel
There are no Catch Up of AFL games or magazine shows on Foxtel Go due to content restrictions.
The key symbol indicates that a channel isn't part of your package. You need to upgrade your Foxtel from Telstra or Foxtel on T-Box package to watch it. Your package can not be updated through the Foxtel Go app. For Foxtel on T-Box customers you can update your packages in the T-Box App, at www.telstra.com/tboxsetup, via 13 2200 or in store. For Foxtel from Telstra customers you can update your packages through the store or via 13 1999. The lock symbol indicates that, as part of your parental control setting, you've locked this classification of content, and can't watch it. If you want to change the settings then the primary (i.e. the first username created and linked to your account) account holder can change these by:
Go to the settings' icon in the app (top right)
Access parental controls'
Choose which classifications you'd like to restrict
No other username or password can change the parental control settings.
We may be required to block out specific programming from time to time, e.g. if a channel doesn't have the legal right to broadcast the programme over the internet. However, all live channels are the same as channels you watch through Foxtel from Telstra or Foxtel on T-Box.
The vast majority of the Foxtel on T-Box content is available via Foxtel Go. There are some minor exceptions. MTV Music and MTV Dance channels are not available. FOOTY PLAY and FOOTY PLAY+ (overflow) channels are not available on PC and Mac only.
Access to Foxtel Go is included in your Foxtel on T-Box and Foxtel from Telstra subscription. However, you will incur data charges when accessing the service on a 3G/4G network.

Re: Everything you need to know about Foxtel Go
Iam book in to have foxtel install on 2nd of March was offered Thursday the 28 my appointment has been cancelled so can be home Thursday I put a complaint in as was told it was 1hour for change over from T Box but no one has got back to me

Do I need to worry about these event handlers in a grid from a memory leak perspective?

I'm pretty new to Flex and coudn't figure out how to add event handlers to inline item renderer components from the containing file script so I attached the listnerers simply as part of the components themselves (eg <mx:Checkbox ... chnage="outerDocument.doSomething(event)"../>):
<mx:DataGrid id="targetsGrid" width="100%" height="100%" doubleClickEnabled="true" styleName="itemCell"
      headerStyleName="headerRow" dataProvider="{targets}"
      rowHeight="19" fontSize="11" paddingBottom="0" paddingTop="1">
     <mx:columns>
     <mx:DataGridColumn width="78" dataField="@isSelected" headerText="">
     <mx:itemRenderer>
          <mx:Component>
               <mx:HBox width="100%" height="100%" horizontalAlign="center">
                    <mx:CheckBox id="targetCheckBox" selected="{data.@isSelected == 'true'}"
                         change="outerDocument.checkChangeHandler(event);"/>
                    <mx:Image horizontalAlign="center" toolTip="Delete" source="@Embed('/assets/icons/delete.png')" useHandCursor="true" buttonMode="true"
                         click="outerDocument.deleteHandler(event);"/>
                    <mx:Image id="editButton" horizontalAlign="center" toolTip="Edit" source="@Embed('/assets/icons/edit-icon.png')" useHandCursor="true" buttonMode="true"
                         click="outerDocument.editHandler(event);"/>
               </mx:HBox>
          </mx:Component>
     </mx:itemRenderer>
     </mx:DataGridColumn>
          <mx:DataGridColumn id="Name" dataField="@collectionDesc" headerText="Name" itemRenderer="com.foobar.integrated.media.ui.component.CellStyleForTargetName"/>
          <mx:DataGridColumn id="Created" width="140" dataField="@createDateTime" headerText="Created" labelFunction="UiHelper.gridDateFormat" />
     </mx:columns>
</mx:DataGrid>
This grid is part of a view that will get destroyed and recreated potentially many times during a user's session within the application (there's a large dynamic nature to the app and views are created at run-time.) By destroyed I mean that the view that holds the above datagrid will no longer be referenced under certain circumstances and an entire new view object is created (meaning the old datagrid is no longer refernced and a new one is created.)
I heard you should clean up event handlers when they are no longer used, and I know at what point the view is destroyed, but I don't know how to clean up the event handlers added to the item renderer components? Is it something that the Flex garbage collector will handle efficiently?
Also, on a somewhat related note, how could I push the item renderer to an external component since in my event handlers for the item renderer buttons I need a reference to the datagrid.selectedIndex which, as an external item renderer I wouldn't have access to this containing grid?

No. You don't need explicit cleanup in this case: if your outerDocument is going away, you have nothing to worry about. The event handler leak can happen in sort of the reverse situation: suppose you have a long-lived MyView that contains a custom DataGrid like the one below. Now suppose that MyView frequently destroys and re-creates the grid. And suppose that on its creationComplete event, the grid registers a listener for outerDocument's (MyView's) enterFrame Event. Unless you explicitly remove this listener, MyView will still have a reference to it even after the grid that registered the listener is destroyed (and garbage collected).
This is a pretty contrived example, but it sort of illustrates the potential for leaks: a certain component is elligible for garbage collection, but some longer-lived component holds a reference to it (or part of it, such as a listener function). If the longer-lived component is elligible for GC as well, you don't really need to worry about proper cleanup. That's what you're paying the GC processor cycles for.

FAQ: I already have a Revel account. What do I need to do? What do I need to know about this?

Q: I already have a Revel account. What do I need to do? What do I need to know about this?
A: If your Revel account uses the same Adobe ID as your Photoshop.com account, your JPEGs will be moved there. Otherwise, a new Revel account will be set up for you using the same Adobe ID you use with your Photoshop.com account.
Revel accounts can be merged manually. Use the Adobe Media Downloader to download all of the JPEG photos from your Photoshop.com library and then upload those photos to your existing Revel account.
Click here to archive your Photoshop.com library so you do not lose any files.
You will be asked to download an Adobe Air application called Media Downloader

Your .mac Mail account will continue to operate normally as long as you access the account from the Mac's Mail program. Read this:
What if I just want to keep using my email on all my devices?
As of May 1, you can choose to keep using your mail after MobileMe ends, even on devices that don’t meet the iCloud system requirements. Just go to me.com/move and select the option to keep using your email after MobileMe ends. Once you have completed this short process, your mail will continue to work on devices that don’t meet the iCloud requirements after MobileMe ends on June 30th, 2012.
iCloud is a collection of features that allows you to sync Safari bookmarks, Calendar items, Contacts, and iWork documents (Pages, Numbers) among multiple devices, among other things. Your photos in iPhoto will not be affected.
iCloud is most valuable for people with iOS devices and Macs and requires OS X 10.7 "Lion".
Here is some more information: http://www.apple.com/mobileme/transition.html

Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion or later:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion onwards, however MPEG Streamclip still needs it. See this:
http://support.apple.com/kb/HT3381
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. (The same applies to Mountain Lion even though that has it preinstalled.) You don't have to install QuickTime 7.

I NEED TO KNOW ABOUT DRIVING TABLE...PLEASE

Well, My name is Adan. I am from Panama.. my english is not
good. But I'll try. I need to know about driving tables and how
have to choose a driving table and how optimizer proccess an sql
statment.
Example:
Employees have (1,000,000 rows),
dept have (100 rows)
Category have (100 rows)...
I need retrieved all employees with category and dept name for
those employee with salary > 100000
Well, What is the driving table and where i have to put this one
in the from clause ? What about order in the where predicate...
First ?
Select E.name, C.category, D.Departement
from Employees e, dept d, category c
where
and d.cat = c.cat
and e.deptno = d.deptno
and e.salary > 100000
Last ?
Select E.name,C.category, D.Departement
from dept d, category c ,Employees e
where
and d.cat = c.cat
and e.deptno = d.deptno
and e.salary > 100000
I apreciate your help....Thanks and sorry for my english....
Bye..

Adam,
If you set your optimizer = choose and analyze the tables and
indexes to generate statistics, then your system can use the
Cost Based Optimizer (CBO) and, like David said, it will
automatically choose the best access path, and the order of
things will not matter.
If your optimizer is not set to choose or if there are no
statistics, then it will use the Rule Based Optimizer (RBO), in
which case, the only thing that matters is the order of the
tables in the from clause. When using RBO, the driving table
should be at the end of the from clause, in the right-most
position. The driving table is the one such that, after the
restrictions have been applied, returns the smallest number of
rows. You would have to compare the number of rows in the
employees table where salary > 100000 to the number of rows in
the dept table (100) and the number of rows in the category
table (100).
In RBO, if there are more than 100 rows in the employees table
where salary > 100000, then your from clause would be:
FROM employees e, dept d, category c
In RBO, if there are less than 100 rows in the employees table
where salary > 100000, then your from clause would be:
FROM category c, dept d, employees e
This is all that applies to the example you have given, however
there are other things that can apply in other situations. For
example, if there is an outer join to a table, the table that
has the (+) cannot be used as the driving table.
Barbara

Need the opinion of experts: N85 with Bluetooth pr...

Really need the opinion of experts on this one.
My N85 was swapped after the complaint that the Music Library Menu opened automatically after pairing with bluetooth of the car (permanent failure). Another complaint was that video recording was defective (intermittent failure). Also, Nokia detected great consumption of battery.
My question is: the swap came back the same relating to the bluetooth problem.. Is this a case of bad repair or a case of low knowledge...? I'm wondering if the Music Library Menu is to open when pairing with car bluetooth (strangely)....

The Dell Precision 380 has 3 PCIe slots: a x16 (for video cards), a x1,
and a x4. I'm sure there are other PCs on the market with
multiple PCIe slots.
Alternatively, the PCIe-8362 has TWO cabled PCI Express links. So
you only need one slot in your host PC. This may not be the best
solution, however, if bandwidth is your primary concern. With one
8362 connected to two chassis, the total maximum throughput is 160
MB/s. With two 8361s (each connected to a different chassis), the
total maximum throughput is 220 MB/s (110 MB/s on each).
Finally, keep in mind that the PXI chassis in your system are still
running at PCI speeds (132 MB/s). Plus, this bandwidth is shared
across all devices in the system. So the MXI Express connection
to the chassis may not be the bottleneck in the system.
Good luck!

Need to help about deploying oracle forms on AS

well i need help in deploying my webforms on the AS THAT is on redhat linux 2 help me with some material or links that provide me how to deploye my application on it
alos i need to know about complete help guide for the deploying of database on database server that is on linux and deploying forms on AS WHICH is also on linux

we have an application in developer /2000 that we will be deploying on the internet using Oracle 9iAS. we also want to provide limited access to the application / information from PDA, cell phones, etc. Can I take advantage of existing code in developer/2000 that can be used with Oracle 9i wireless?

Need detailed information about u0093CALL CUSTOMER FUNCTIONu0094.

Need detailed information about CALL CUSTOMER FUNCTION.

Hello Ayan
CALL CUSTOMER FUNCTION. is the old version of
customer exits. Using transaction SMOD you can see which customer exits SAP provides. Using transaction CMODyou can see the enhancement projects which make use of these SAP enhancements.
SAP enhancements consist of different components: function modules, screens, etc.
For example, SAP enhancement CATS0001has a single component, function module EXIT_SAPLCATS_001. This function module is called within include LCATSF54:
*&      Form READ_WORKLIST_FROM_EXIT
*       Read worklist from customer exit                               *
FORM read_worklist_from_exit.
DATA: l_catsw TYPE catsw_tab.        "XZQAL0K061795
*----------------Beginn XZQPL0K017888----------------
DATA: l_icatsw_fix LIKE catsw OCCURS 0.          "XZQPL0K017888
* Sichern der ICATSW_FIX, damit mögliche Änderungen aus
* User-Exit/Badi rückgängig gemacht werden können.
l_icatsw_fix = icatsw_fix.
*----------------Ende XZQPL0K017888----------------
CALL CUSTOMER-FUNCTION '001'
       EXPORTING
            sap_tcats      = tcats
            sap_pernr      = catsfields-pernr
            sap_dateleft   = catsfields-dateleft
            sap_dateright = catsfields-dateright
            sap_datefrom   = catsfields-datefrom    "XZQPL0K017888
            sap_dateto     = catsfields-dateto      "XZQPL0K017888
       TABLES
            sap_icatsw     = icatsw
            sap_icatsw_fix = l_icatsw_fix           "XZQPL0K017888
       EXCEPTIONS
            OTHERS        = 1.
*-------------Beginn XZQAL0K061795 Worklist-Badi in CATS -------
IF badi_worklist IS INITIAL.
    CALL METHOD cl_exithandler=>get_instance   "Aufruf der Factory-
       CHANGING instance = badi_worklist.      "Methode
ENDIF.
l_catsw = icatsw[].
* Restaurieren der l_icatsw_fix für das Badi, falls sie
* doch im User-Exit geändert worden ist.
l_icatsw_fix = icatsw_fix.                  "XZQPL0K017888
CALL METHOD badi_worklist->get_worklist    "Aufruf des Add-Ins
    EXPORTING
      sap_tcats      = tcats
      sap_pernr      = catsfields-pernr
      sap_dateleft   = catsfields-dateleft
      sap_dateright = catsfields-dateright
      sap_datefrom   = catsfields-datefrom    "XZQPL0K017888
      sap_dateto     = catsfields-dateto      "XZQPL0K017888
    CHANGING
      sap_icatsw     = l_catsw
      sap_icatsw_fix = l_icatsw_fix.          "XZQPL0K017888
icatsw[] = l_catsw.
*-------------Ende XZQAL0K061795 Worklist-Badi in CATS -------
ENDFORM.                               " READ_WORKLIST_FROM_EXIT
In this routine you can see the most up-to-date version of customer exits:
BAdIs (Business AddIns). Inbetween SAP has developed BTEs(transaction FIBF) which are basically dynamically called function modules.
Regards
Uwe

Need an opinion about FieldPoint RT Communication

Similar Messages

Maybe you are looking for