Need bios reset password

Please help me with bios reset password HP pavilion dv4000 - system disabled - 13179 --- s/n (Personal information removed by moderator) - p/n EC329UA#ABA
Thank you

Without the DriveLock password there is no way to access the drive. 
Since the DriveLock password is specific to the hard drive I believe your only choice is to replace the drive. You cannot disable or remove DriveLock protection without the password.
Related Info:
DriveLock Hard Drive Protection

Similar Messages

  • NEED BIOS BACKDOOR PASSWORD FOR HP PROBOOK 6540b. Have tried all types of bios resets, no luck.

    NEED BIOS BACKDOOR PASSWORD FOR HP LAPTOP PROBOOK 6540b. Have tried all types of bios resets, doesn't work.
    The password stay's no error code for entering wrong ones.

    Hi, 
    I too have been pulling my hair out with this problem on the 6540B. However after  2 days of various driver combinations I've finally found a working fix. I don't have the luxury of reinstalling Windows XP as the machine is custom configured with apps which will take over a week to configure again.
    If you've got no audio it's probably because you've installed the IDT High Def Audio Driver. You may have tried a whole bunch of other options also to try and rectify the problem as I did.
    The solution is fairly simple:
    Goto to add/remove programs and remove "SoundMax".
    Reboot
    The audio driver may try to reinstall on boot up... allow it to install. It will still not work and will still show exclamation mark against IDT driver in Device Manager.
    Goto run... then type regedit and hit enter. Windows registry opens.
    Goto My Computer>HKEY_LOCAL_MACHINE>SYSTEM>CurrentControlSet>Services>
    Delete the WHOLE KEY for AEAudio and then exit regedit
    Go to device manager and uninstall the IDT High Def Audio device from Device Manager
    Then using the original HP Application and Driver Recovery DVD supplied with the notebook, run the autoplay, choose Hardware Enabling Drivers, tick only the IDT High Def Audio driver and follow the installation instruction on screen. You will be prompted to reboot after which Windows will find new hardware. The IDT will install itself and you will find that the sound works!
    Good Luck!
    For those that cannot find their original disk, the IDT Audio Driver from the original disk is available at http://tinyurl.com/IDTAudio6540b or http://www.4shared.com/file/RxXn5afj/IDTAUDIO.html

  • TS1543 my mac wont stop at single user it continues to root, how can i get to single user to enter info needed to reset password

    I my mac wont recognise my password, i have tried to reset password using single user but my mac wont stop at single user it just continues to root, how do i get it to stop at single user so i can add info needed to reset password?

    Are your sure that wasn't a Verbose boot (Cmd-V) you were trying? That would go on to a regular boot.
    Try a PRAM Reset, then try the single user, Cmd-S, at the startup chime. For the PRAM Reset, hold down Option - Cmd - P - R all together until it chimes a total of three times, then let go to finish booting.

  • Can't get email, need to reset password?

    Need to reset password for email, how do I do this

    Go to Settings > Mail, Contacts, Calendars
    Find your account and change its password there.

  • I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?

    I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?
    I have a 2012 mac book pro can I use that to connect with firewire and load osx that way? and how woudl I do that?
    Thanks so much!

    To what password are you referring? Do you mean your user account's admin password? Or do you mean the master password for File Vault or do you mean a Firmware Password?
    For an admin password:
    Forgot Your Account Password
    For Snow Leopard and earlier
         Mac OS X 10.6- If you forget your administrator password
    For Lion/Mountain Lion
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see Reset a Mac OS X 10.7 Lion Password and
         OS X Lion- Apple ID can be used to reset your user account password.
    If you cannot do the above then try this:
      1. Boot to Safe Mode by restarting and after the chime press and hold down the COMMAND-S keys until a black screen with white type appears.
      2. At the prompt, type the following commands pressing return after each command line:
         /sbin/fsck -yf
         If you do not receive a "Filesystem OK" message then repeat this command until
         you do.  If after seven tries you still do not receive a "Filesystem OK" message,
         then the system is corrupted and needs to be reinstalled.
         mount -uw /
         cd /private/var/db/netinfo
         mv local.nidb local.old
         rm ../.AppleSetupDone
         shutdown -r now
    The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
    This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
    How to reset the OS X password without a startup CD:
    Reboot into Single-user Mode. Enter the following and press RETURN after each command line
       1. Type fsck -fy
       2. Type mount -uw /
       3. Type passwd <username>
    I have never tried this method myself.

  • I have forgotten my password and misplaced my Installation disc and need to reset password, help please! btw are the intsallation disc unique to each computer or could i borrow a friends?

    I have forgotten my password and misplaced my Installation disc and need to reset password, help please! btw are the intsallation disc unique to each computer or could i borrow a friends?

    Call Apple to get replacement DVDs > http://support.apple.com/kb/HE57

  • Need bios reset for hp dv 40000 I hit 3 time error code is09924

    I need to reset Bios password for hp dv4000 I hit it 3 time error code 09924

    Hi,
    Try entering:     pjfgn
                                      or
                                   wpkkxh
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Folio 9470m Elitebook need BIOS ADMINISTRATOR password

    I had full control of the laptop BIOS, but did a factory security reset and after that I can’t change my pre boot password.
    Please help, I tried logging in with the BIOS ADMINISTRATOR password but it locks me out.
    sn: [edited by Moderator]
    Thank you.

    MM.
    For BIOS or power-on passwords.
    There are no master password generators for ProBooks or EliteBooks.
    You will need to contact HP.
    http://www8.hp.com/us/en/contact-hp/ww-contact-us.html?jumpid=reg_r1002_usen_c-001_title_r0003
    Or look at this link.
    http://forums.mydigitallife.info/threads/49497-HP-Probook-Elitebook-BIOS-Password-Reset-Utility
    Or replace the BIOS chip.
     http://www.ebay.com/itm/UNLOCK-HP-ELITEBOOK-BIOS-PASSWORD-CHIP-8470p-8470w-8570p-8770w-8570w-9470m-2...
    REO
    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Need to reset password for digital ID to sign doc in Adobe Reader on thinkpad using Windows

    Hi,
    I need to reset (or find) my password for the self-signed digital ID I created in order to sign a doc in Adobe Reader using Adobe Echosign software. I'm currently on my laptop (thinkpad) which uses Windows. How do I do this?
    Thanks

    Unfortunately, only you can remember your password for a self-signed digital ID.  No one can reset or find it for you. 

  • Need to reset password, lost install disc

    I have a wireless router, Model WRT54GS v7.  I moved recently, and I need to reset the password to connect wirelessly.  I've lost the install discs during my move.  What do I need to do?

    The reason why the admin is no longer working as the router password because you might have setup a router password, not knowing, during the first time you setup your router...If you remember the router password when you first used your setup cd to install your router then enter that password else you need to reset your router and re-configure it...
    To reset the router press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
    If your Internet Service Providor is Cable follow this link
    If your Internet Service Providor is DSL follow this link
    Then adjust the Wireless Settings as suggested in the previous post...

  • Need to reset password

    my granddaughter locked her ipod 5th geneeration and forgot the password.  need to reset the password.

    Instructions are in the iPod nano (5th generation) - User Guide 

  • Need to reset password but Recovery Mode requires password

    Hi I have a mac book pro retina display, I need to reset the admin password but I cannot use Command+R or option on start up because they both require a password. Any help would be appreciate
    Thanks,
    Alex

    see: Check for a firmware password
    http://reviews.cnet.com/8301-13727_7-57554561-263/check-a-used-macs-condition-be fore-purchasing/?part=rss&tag=feed&subj=MacFixIt

  • Need to Reset Password for Partental Controls

    I need to get into Parental Controls to make changes and I don't have my password.  What can I do?  My password hint is not of any help.
    Thank you,
    Kat

    What is the model number of your router?
    If you have Linksys E series or valet router and you are using Cisco connect for parental control then you will need to reset the router and reinstall the Cisco connect. See this link.

  • Need to reset password in Panther 10.3.9. Retail install disc won't mount.

    I'm at the end of my wits here. I actually need access to Carbon Copy Cloner, but everytime I put in the password and click "clone" it says I entered in incorrectly.
    I did this a while back with my Tiger, G4 PB. I believe the Tiger install disk will allow me to reset password (it won't with Panther).
    Everytime I boot from the CD, I end up stuck in the blue screen.

    TheRobotsCubicle, welcome, either you need to fill out your machines profile here or give us a little more info on your computer and any add-ons. In the mean time try resetting the PRAM.
    Joe
    Power Mac G4 Gigabit Ethernet   Mac OS X (10.3.9)   1.5 GB Ram, ENCORE/ST G4, Tempo SATA, ATI Radeon 9000, Adaptec 4000

  • HT201412 Ipad is disabled, need to reset password

    Ipad is disbled, need to reset password

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

Maybe you are looking for

  • Print option in BI Report

    Hi When i click on the print version in the portal, i can take the printout of the report in the PDF format. When i have only 6 columns in the report then all fit in one page. But if i drill down and add one more column to the report and try to do th

  • Monitor  Application Module Pool

    Hi i am tunning my ADF app parameters, how can i monitor my Application Module Pool (Like live instances and so on) so i can make adjustments on its values?

  • WCS and WLC, On the same VLAN ?

    Whats best practice ? Is it better to have the WCS on the same vlan as the controller(s) Johann Folkestad

  • How to create automatic po from migo?

    enter Vendor    Message no. M7018 i want to create automatic PO from MIGO and i put the vendor in partner field vendor but this msg is issued

  • Possible Solution for Asus A8V + Soundblas

    Hello everybody! I had the same problem with stuttering and clicking sound after system cold start. Going into Bios or restarting windows solved the problem. Now I flashed the original bios from the ASUS CD (version 00 or something like that), and no