Need BTE for the transactions FD32, XD05,FD05...

HELLO FRIENDS,
can any one tell me the BTE for the transactions FD32, XD05,FD05...?
thanks,
Romanch

Hi Romanch,
You can use the following BTE
00001321 - CUSTOMER MASTER DATA: Save with Data Transfer
Also you can check from FIBF Transaction -> Environment -> Infosystem(P/S or Processes) to find the BTE's related to application component.
Hope this helps.
Thanks
Lakshman
Edited by: Lakshman Tandra on Jan 25, 2008 12:47 PM

Similar Messages

Err in PO creation-Sales document item is not defined for the transaction

Hi,
I am getting the following error while creating PO
"Sales document item 30000183 000100 is not defined for the transaction
Message no. V1 198
Diagnosis
You have tried to carry out a business transaction for this sales and distribution document item which, for this item, is not allowed.
This may be due to the fact that this item is not part of a make-to-order production with cost management in the sales order."
I have used an item category which is copy of TAB and the sales order line item is attached to WBS element.
can any one guide me what needs to be done.
thanks

If you want the sales order creation to initiate a PO creation automatically, check if the "Create PO Automatically" button is ticked on for the item category in Transaction flow tab in tcode VOV7
This will solve your problem, provided your configuration for PO on the MM side is fine.
Reward if this helps.

Finding output type and form for the transaction

hi all,
 i have a problem finding output type and form for the transaction j1iv .actually i need to find the standard output type and form name for the transaction j1iv. how can we do it.

Hi Abinash,
 Go through the following steps.
 1 . Go to the transaction NACE.
 2. You will be able to see the Application and description tab over
 there. Select the Application for which you need the output type.
 3. After selecting the Application..on the top you can see the tab--
 output types...click in that..here you will be able to see all the output
 types for that application.
 4. Now select a output type ..and on the left side u will be able to see
 the tab for processing routines...double click on it...
 5. Here you will be able to see the standard SAP program...the form
 routine...the form..attached to it..
 Please Reward..if helpful..
Regards,
Himanshu.

BAPI replacement for the transaction VT02

Hi All,
We are doing upgrade from 4.6C to ECC 6.0 version where we need to replace existing BDC with BAPI or a function module.
In a program we are using BDC for the transaction VT02 to update the fields End date (VTTK-DATEN) and End time (VTTK-UATEN) for the given shipments. Please suggest a BAPI or Function module to replace the existing BDC for VT02 transaction.
The BAPI 'BAPI_SHIPMENT_CHANGE' is not released officially in ECC 6.0 version. Can we use it in ECC 6.0 version? If yes, please let me know how to call this BAPI with only these three fields(Shipment number-TKNUM, Shipment end date-DATEN and Shipment end time-UATEN).
Thanks in advance.
Regards,
Siva.

hi,
try this...
SD_SHIPMENT_HEADERS_CHANGE_DIA
Prabhudas

How to find the BADI for the transaction CRM_IC in CRm 5.0

Hi all,
I have a issue:
in CRM 5.0, for the transaction CRM_IC (IC Web tcode), i need to do an enhancement for that tcode.
In crm_ic, we can enter Business partner and product id data,whenever we provide the inputs for BP and Product id and if we press enter then it displays the details like product description, UOM etc.
what i need to do is when we enter product id which is not available in Product Master,develop an enhancement which get those details from Cust / Dist chain and replace the entered value with retrieved value.
For this CRM_IC, I need to find the correct BADI.
Can any one send me out the Exact BADI for this requirement.

spro> crm > transactions > basic settings > badi's
BAdI: Product Processing at Item Level
In this step, you can create enhancements for product processing at item level in the business transaction The following methods are available to you in the Business Add-In CRM_PRODUCT_I_BADI:
CRM_PRODUCT_I_CHECK: BAdI to check object PRODUCT_I
CRM_PRODUCT_I_MERGE: BAdI to merge object PRODUCT_I

Parameter ID for the transaction fb03-document display

Hello,
I am applying this inquiry for one customer. Please check it below:
Could you please let us know what is the parameter ID for the transaction FB03-document display, which can be use for the default Parameter value as shown below for transaction FBL3N and FBL1N.
Parameter ID
FIT_ALV_AP
FIT_ALV_GL
Thank you!

Parameter ID in SAP is defined in user profile to default values while processing transactions ins SAP.
To find out the parameter ID for e.g. goto F-02.
Click on company code field(BUKRS). Press F1, see technical information and note down the parameter ID BUK.
Now goto SAP Easy Access screen. System> User Profile> Own Data> Parameters.
Maintain BUK with value say XXXX.
Next time you goto any transaction where you need to enter comany code XXXX will be dafaulted.
FIT_ALV_AP FI Line Items: Vendors ALV List Variant
FIT_ALV_GL FI Line Items: General Ledger ALV List Variant
Please maintain the variants that you have maintained for these parameter IDs
Rgds
Harmees

Error while running a BDC for the Transaction F-02

Hi,
 I'm getting an error "Parking not possible during Batch Input" while running a BDC for the transaction F-02.
 When i click on the error message it displays the message [b]"In Customizing, you can control whether an error message is issued."
 How to solve this issue?.
 Waiting for ur replies.........
Regards
N.Senthil

Hi,
When you are doing the recording in SHDB, and in the same screen where the TCODE to be recorded is given, there are options that you can choose called "Recording Parameters"...Select the checkbox which says "Not a Batch Input Session", this will set the sy-binpt variable to " "(in a recording by default it is "X")...and you will not get this error...
Also make sure while writing the BDC program to make use of the "bdc options" parameter which has this property to switch of sy-binpt...
 Refer below theard for sample bdc code for f-02.
https://forums.sdn.sap.com/click.jspa?searchID=5126766&messageID=1538409
Regards

Running BDC program in background for the transaction VL02N

Hi All,
I have coded a BDC program (call transaction method) for the transaction code VL02N. I can able to run the program manually & successfully. But if I execute the program in background(SM36), it is going to dump giving CNTL_ERROR.
Note: I am not using any of the GUI_UPLOAD, GUI_DOWNLOAD funciton modules in the program. But I am using the FTP command funtion modules like( FTP_COMMAND, FTP_CONNECT, FTP_DISCONNECT and FTP_SERVER_TO_R/3).
<removed_by_moderator>
Thanks in advance.
Ramesh.
Edited by: Julius Bussche on Jul 8, 2008 5:55 PM

VL02N is an enjoy transaction. You cant run it in background. Please try VL02.
Thanks
Romit

*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

HT1349 My Macbook Pro was stolen and I need the serial number. How would I find this? I need it for the police report so if I could get answers soon that would be great, thanks :)

How would I find this? I need it for the police report so if I could get answers soon that would be great, thanks

Lanlani wrote:
... It there any other solution ?
Consider using this site: http://www.stolenlostfound.org/
This is Apple's official word on the subject:
Reporting a lost or stolen Apple product
If you have lost or found an Apple product, please contact your local law enforcement agency to report it. Although Apple does not have a process to track or flag lost or stolen product, you can use My Support Profile to find a list of serial numbers for items purchased or registered with your Apple ID.

I would like to upgrade my OS to the latest version. I now have 10.6.8 and my machine has 1Gb of memory. Need 2Gb for the new OS. Is is possible (and practical) to add memory to a machine that's five years old?

I would like to upgrade my OS to the latest version. I now have 10.6.8 and my machine has 1Gb of memory. Need 2Gb for the new OS. Is is possible (and practical) to add memory to a machine that's five years old?

You can put two 2gb RAM sticks in your model 2,1 but it can only use 3,3gb. This is a hardware limitation and cannot be changed.
http://en.wikipedia.org/wiki/3_GB_barrier
http://www.everymac.com/systems/apple/macbook_pro/faq/macbook-pro-core-2-duo-3-g b-memory-limitation-details.html
OWC tests have found that there is a slight speed increase with having two 2gb sticks in rather than one 1gb and one 2gb. Your model is in the gray lines at the bottom of the graph. http://eshop.macsales.com/shop/Memory_Benchmark/Apple_MacBook/
You can buy Lion for $29 from the App Store witht a model 2,1 MacBook. Lion will require at least 2gb of RAM but really needs 4gb to run smoothly. As for programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
Before Mac switched to Intel processors they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.
These are good online stores for Mac compatible RAM
OWC http://eshop.macsales.com/shop/memory/MacBook/DDR2/ - They offer Mac tested RAM at very good prices.
Crucial Memory http://www.crucial.com/ - good place to buy RAM from all over the world. They also have an excellent memory selector that allows you to choose memory based on your computer's model
Data Memory Systems http://www.datamemorysystems.com/apple-memory.asp - another good, cheap place to buying RAM if you live in the U.S.
Here are instructions on replacing RAM in a MacBook with a removable battery. http://homeoffice.consumerelectronicsnet.com/articles/viewarticle.jsp?id=44404
If you don’t have the tools to open up the MacBook OWC has a set for $5
http://eshop.macsales.com/item/OWC/TOOLKITMHD/

I have a macbook pro 1175 its a 2006 model which boot camp will work i tried 4.03 but it says this boot camp is not for this machine thats the oldest one i found here please help i have windows 7 32 bit installed but need drivers for the sound

i have a 2006 mackbook pro running windows 7 32 bit i need drivers for the sound and the earliest bootcamp on here is 4.03 my machine says its not for this system please help which version of boot camp can i use

Read this. You need to be running Snow Leopard or later.
http://support.apple.com/kb/ht3986

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.

Need help for the $200 promo rebate for trade-in of I Phone 4

Need help for the $200 promo rebate for trade-in of I Phone 4. Unable to preregister when I ordered the new 6 in September. Now can not contact VZW recycle program regarding.

When I ordered my phone on Sept. 13th in a Verizon store, I had to ask the salesman how I went about getting the $200 rebate. He said shipping materials would come with the new phones. When I received the confirmation e-mail of my order, it contained a link for the rebate. Fortunately I clicked on the link, filled out the form online, and received the packing materials to send my phone in shortly after. My phones came in on Oct. 14th and I sent 3 of them back. So far I have received a gift card for $200 for 2 of the phones; the other is showing not received. I don't know what your situation is, but I think the promotion ended Oct. 15th. If I had listened to the salesman I think I would be out of luck as well. I hope I am wrong for your sake.

Cancel an invoice for the transaction MR8M

I want to cancel an invoice for the transaction MR8M but when canceling the system displays a message blocking « No reversal possible. Reverse value must be reset », Can you help me please ?

Check if that Invoice has been already cleared for pay.
Regards
TGB

Need BTE for the transactions FD32, XD05,FD05...

Similar Messages

Maybe you are looking for