Need By Date Should be equal or after the effective start date- error in po_requisitions_interface_all

Hi All,
We have created a manual planned order for one buy item in ASCP workbench for some qty and released it.
But, we are not able to get its requisition created in source.
When we check the PO_Interface _Errors table, we found that it is errored out with error as --
Need By Date Should be equal or after the effective start date .
Can anyone please help me out to find the cause of this issue. Any help/pointer in this regard will be highly appreciated.
Thanks,
Avinash

Hi Abhishek,
We found the root cause of the issue.
Its BPA was not having any Effective start date mentioned in its terms. So we put it as BPA creation date and ran the data collection and plan run.
After that we were able to see its BPA release created without any error.
Thanks,
Avinash

Similar Messages

HCM Fusion createWorker (WebService) whats the Effective Start Date format ?

Hi Folks
I am using HCM Fusion WorkerServices exposed via web services, and trying to add a worker and getting error (via Java Exception) HRC-HRC_DE_SRV_ESD_EED_NOT_SET. I understand that HCM Fusion webservice might a wrapper around People Soft (I could be wrong) among other things, and googling shows me how to set date within PeopleSoft or its implementation.
I want to inquire whats the default format for the effective start/end date to be set via Webserice. I tried different formats but no success.
I am using WorkerService. Worker Version 2
Any pointer, help would be greatly appreciated.
Regards

Update: Exact error/Message returned from web service is
JBO-HRC:::HRC_DE_SRV_ESD_EED_NOT_SET: <MESSAGE><NUMBER>HRC--1</NUMBER><TEXT>HRC-HRC_DE_SRV_ESD_EED_NOT_SET</TEXT><CAUSE>The message, HRC-HRC_DE_SRV_ESD_EED_NOT_SET, can not be accessed.</CAUSE><ACTION>Report this problem to an administrator.</ACTION><DETAILS>HRC-HRC_DE_SRV_ESD_EED_NOT_SET</DETAILS><INCIDENT></INCIDENT></MESSAGE>
Again thanks for reading and any help.
Regards

Actvities before the Project Start Date

Every now & then, we will get an activity which is a precursor to a project kicking off as a project start date so in theory from that start date would be known as either week 1 or Month 1.
So in this case, any actvivity starting a month for example before the kick off date should be shown in "- Month 1" but in Project 2013, it takes this new date as Month 1 even when the Project Start Date has not changed.
The earlier versions of Project, you could manipulate this so what's changed?...Is there a way around this?
I am not using Project server as will never use it to save myself from grief & stress!...prefer to keep it simple!

I couldn't test it with 2013 but with 2010 the week numbering starts at the project start date, so you can have a project start date on a certain date which will be your week1, and then set predecessors with no impact on the numbering.
If you confirm that this behavior jas changed with 2013 version, an option could be to enter as manually scheduled tasks with no dates the tasks prior to the project start date, using custom fields to enter the actual dates.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

'Latest Start Date' & 'Effective Start Date' are displayed as different

Issue Background:
I have told following steps to follow while creating an employee to my end users.
Case: An employee record has to be entered on 02-05-2012 who joined on 01-01-2010.
Steps to be followed:
- Enter the basic details of the employee (on 'People' form) / Left the 'Effective Start Date' and 'Latest Start Date' as default date i.e. 02-05-2012
- Ctrl + S
- Click on 'Assignment' button
- Enter Basic Assignment information (The effective date on Assignment form is being displayed as '02-05-2012')
- Ctrl + S / Close the assignment form
- Change the 'Latest Start Date' = 01-01-2010
- Ctrl + S / Some warnings appear and then the record is saved.
My end user created at least 100 employees following the same procedure.
Issue:
With at least 5 employees there is a case that when I query those employees I am able to see a different Effective Start Date (i.e. 01-01-2010) and Latest Start Date (i.e. 02-05-2012). And when I open the assignment form the effective date displayed there is '02-05-2012' as well. ....Means some how in these records the assignment is created for these employees starting from 02-05-2012..rather than 01-01-2010.
When I try to change the Latest Start Date to 01-01-2010 then system shows me this error --> '_APP-PAY-06841: Person changes exist between the old date and new date._'
I don't know EITHER how this case was produced while entering the date OR what is the solution of this problem.
Can any body help in this regard?

Thanks for your response Avinash.
Btw, I have viewed all these notes 368289.1, 603233.1, 399056.1, 329692.1, 1146414.1 already, but these don't seem to solve my problem because in each of these are under assumption that the initial Joining Date of the employee (i.e. Effective Start Date and Latest Start Date) is entered correctly without an issue, and these notes talk about dealing with 'Updating or Correcting' the data.
But In my case the pre-conditions are different, although those are making the system to respond in the same way (i.e. showing same error) some how.
As far as deleting the employees is concerned, yes that could be one option, but I am not really sure about adapting this solution as the dates I used in my case were just example dates, and in actual these employees are created almost 1 month back and they are already used in Projects module, CRM module and others.

How to set Service render date should be equal to Billing date

Hi All,
At present when invoice is created the service rendered date (FBUDA) is taken as the basis for the Rebate condition types to select the condition value from the agreement.
The business requires that for the rebate conditions, service rendered date should be equivalent to the billing date, so that correct agreement is selected based on the billing date.
Required Change: Service Rendered date should be equivalent to the Billing Date for only Rebate condition Types and only for particular Sales Org.
To achieve this how can I proceed, I have gone through all user-exist for billing no where I have found
Could you please guide me to achieve this functionality?
Thanks and Regards,
Jaya.G

Hi Yadav,
My requirement is to put the billing date in service render date
I.e. in my scenario the Actual GI date is populating into billing date and also in service render date (komk-fbuda)
If we enter billing date manually while creating the billing that should be reflect in service render date, in condition level.
Here it is not happening, it is taking the Actual GI date in service render date,
Here VBRP-FBUDA is different form komk-fbuda.
Vbrp-fbuda is have to reflect form Actual GI date only
My requirement is, I need to populate the billing date into service render date for some conditions only. These conditions are rebate type conditions.
I can populate the billing date to all conditions not for particular conditions
In user exit userexit_pricing_prepare_tkomk
I can move the vbrk-fkdat to tkomk-fbuda
But this not my requirement
I need to populate the billing date to service render date to some conditions types only
In this exit I canu2019t restrict the conditions, I mean in this routine I am not able to select the condition types
Please advice me where can I write the code to achieve my functionality
Thanks in Advance
Jaya.G

I am going to have to restore my iTunes to a prior date, how can I retrieve apps purchased after the chosen restore date?

I appear to have "lost" many of the songs, and videos, in my iTunes. The songs/videos show, but when I attempt to access them, it says it can't find the file and offers to search. In the search the song/video shows, but is greyed out. If I restore I tunes to a prior date, how do I retrieve apps that were purchased after the chosen restore date?
Thanks,
Dale

Icloud is made up of many services. you may choose to use or not use any or all of these services. One of the many services it provides is that it allows you to redownload past purchases.
"I prefer to keep all of my information on my Mac, and a local backup drive."
As you should. That is why, if you have lost your comtent, you should redownload that lost content from icloud to your computer and back it up, using the directions I provided to you.
"lso, I don't recall setting up a iCloud account. "
Does not matter at all. You do not need an icloud account. Forget you ever heard the word icloud. Perhaps if we stop using that word, you will understand. Itunes now allows you to download your past purchases again - instead of the one download only rule that has existed orior to now. You can download your purchases to your computer again.
You seem to be getting hung up on the word icloud, so imply forget you heard it.
Follow the direction in the link I provided to download the songs, etc that you have lost. Once downloaded, they will once again reside on your computer where you can back them up and sync them to device as you always have.
nothing at all changes.
Hope this helps.

Find the latest Start date after a gap in date Field For each id

Hi All, Can anyone help me in this, as it is so urgent ..My requirement is to get the latest start date after a gap in a month for each id and if there is no gap for that particular id minimum date for that id should be taken….Given below the scenario
ID StartDate
1 2014-01-01
1 2014-02-01
1 2014-05-01-------After Gap Restarted
1 2014-06-01
1 2014-09-01---------After last gap restarted
1 2014-10-01
1 2014-11-01
2 2014-01-01
2 2014-02-01
2 2014-03-01
2 2014-04-01
2 2014-05-01
2 2014-06-01
2 2014-07-01
For Id 1 the start date after the latest gap is 2014-10-01 and for id=2 there is no gap so i need the minimum date  2014-01-01
My Expected Output
id Startdate
1   2014-10-01
2   2014-01-01
Expecting your help...Thanks in advance

If you're using SQL Server 2012 this will work for you...
IF OBJECT_ID('tempdb..#temp') IS NOT NULL
DROP TABLE #temp
GO
CREATE TABLE #temp (
ID INT,
StartDate DATE
INSERT #temp (ID, StartDate) VALUES
(1,'2014-01-01'),
(1,'2014-02-01'),
(1,'2014-05-01'),
(1,'2014-06-01'),
(1,'2014-09-01'),
(1,'2014-10-01'),
(1,'2014-11-01'),
(2,'2014-01-01'),
(2,'2014-02-01'),
(2,'2014-03-01'),
(2,'2014-04-01'),
(2,'2014-05-01'),
(2,'2014-06-01'),
(2,'2014-07-01')
-- SQL 2012 and later --
;WITH gg AS (
SELECT
COALESCE(DATEDIFF(mm, LAG(t.StartDate, 1) OVER (PARTITION BY t.ID ORDER BY t.StartDate), t.StartDate), 2) AS GetGap
FROM #temp t
), did AS (
SELECT DISTINCT t.ID FROM #Temp t
SELECT
did.ID,
x.StartDate
FROM
did
CROSS APPLY (
SELECT TOP 1
gg.StartDate
FROM gg
WHERE did.ID = gg.ID
AND gg.GetGap > 1
ORDER BY gg.StartDate DESC
) x
If you're on an earlier version than 2012, let me know. It's an easy rewrite but the final code isn't as efficient.
Jason Long

Need to Trigger a Program in ECC after the DSO load has completed

HI Experts,
I have scenario where i need to trigger a Program in ECC after the load to DSO has been completed successfully. Basically opposite of the everyday scenario.
Can i still use the the RSSM_EVENT_RAISE FM in the program to call the event in ECC.
If the above is true.Do i need to have code in the program to confirm the DSO has been loaded or can i just have the program (which basically calls the FM RSSM_EVENT_RAISE) appended to the process chain after the DSO Activation?
Appreciate your advice

Hi,
To help future proof your solution, lean towards using the process chain as much as possible.
A "Green/Success" only link from the DataStore Activation process variant to an ABAP Program process variant will work nicely. It will also still allow your program to be executed by other scenarios (like manually because you want the event raised now without any dependency on the DataStore status).
SAP now recommends you use the CL_BATCH_EVENT class and it's methods to interact with the system events. Use transaction SE24 to review the methods and parameters available and then use the sample code below to test your solution.
Here is a starting point for coding that is used within an ABAP Program process variant in a process chain.
Use transaction SE38 to store this code to be called by the ABAP Program process variant.
constants:
c_interrupt_eventid   type btceventid value '[Event]',
c_interrupt_eventparm type btcevtparm value '[Parameter]'.
data:
l_interrupt_eventid   type btceventid value c_interrupt_eventid,
l_interrupt_eventparm type btcevtparm value c_interrupt_eventparm.
call method cl_batch_event=>raise
EXPORTING
    i_eventid                      = l_interrupt_eventid
    i_eventparm                    = l_interrupt_eventparm
EXCEPTIONS
    excpt_raise_failed             = 2
    excpt_server_accepts_no_events = 3
    excpt_raise_forbidden          = 4
    excpt_unknown_event            = 5
    excpt_no_authority             = 6
    others                         = 1.
if sy-subrc <> 0.
message e051(rsar) with 'Failed to raise background event.' c_interrupt_eventid c_interrupt_eventparm.
endif.
Note: The error message is process chain friendly and will appear in the RSPC transaction GUI and system logs.
Hope this helps,
John.

Compare data in R/3 with data in a BW Cube after the daily delta loads

Hi Friends,
How can I compare data in R/3 with data in a BW Cube after the daily delta loads? Are there any standard procedures for checking them or matching the number of records?

Hi Sunil,
If you want to check the records daily instead of checking the data in R/3 manually ......
You can try this...
If you have staging DSO(level 1) that means whatever data is in source system load it to Staging DSO without any routines or any modifications.
Now load this DSO data to Cube or DSO(level 2) as per your requirement with routines etc.
Now Staging DSO contains Source system data.
Now the level 2 Cube or DSO contains BW data with some modifications.
Now create a Multiprovider based on level 1 and level 2 data targets.
Now create a report on which keyfigures you want to test the data.
In Multiprovider there is a field called 0infoprovider in data packet dimension.
you can drag this infoprovider to the columns and restict your keyfigures with level 1 and level 2 data targets.
In the first column you can see the level 1 DSO data ( source system data),in the 2nd column you can see the BW data.
Now create a formula which gives the diffrence b/n level 1 and level2.
that is R/3 data - BW data.
If the diffrence is zero both R/3 and BW data are same.
if the diffrence is not eqaul to zero check whether any routine is there or not.

After the last up date for Safari (Mac OS X 10.8.5 in a iMac mid 2011 21.5 inch 2.8GHz Intel Core i7) The window don't open or they are there and only in an outline, kind of like they're behind the screen. I have also done a system update and then a syst

After the last up date for Safari (Mac OS X 10.8.5 in a iMac mid 2011 21.5 inch 2.8GHz Intel Core i7)
The window don't open or they are there and only in an outline, kind of like they're behind the screen.
I have also done a system update and then a system reinstall.
What now? incident nr, 526941222.

After the last up date for Safari (Mac OS X 10.8.5 in a iMac mid 2011 21.5 inch 2.8GHz Intel Core i7)
The window don't open or they are there and only in an outline, kind of like they're behind the screen.
I have also done a system update and then a system reinstall.
What now? incident nr, 526941222.

Need to update the actual start date & time of a operation in workorder

Hi Experts,
I need to update the Actual Start date and Actual start time of a Operation of a WorkOrder through a Function Module.
I was looking into the BAPI_ALM_ORDER_MAINTAIN FM, but i couldn't find any field relating to the actual start date and start time of a operation.
Kindly Suggest me which Function module i can use to complete my task.
Thanks in Advance
bye

Hi,
It is system's standard behavior and no other MRP type will help you in moving the start date outside the planning time fence. With MRP type P3 new requirements are covered at the end of the fixing period, the end date is set and planed order is scheduled backword. Hence the start date will lie within the planning time fence.
Rgds,

Streaming radio just stopped working Firefox version 8, but I can get everything else. Add on's are up to date. I can't recall if it happened after the Firefox up date or after listening to last.fm or what! How to fix this?

Streaming radio just stopped working Firefox version 8, but I can get everything else not on stream to work. Add on's are up to date. I can't recall if it happened after the Firefox up date or after listening to last.fm or what prompted it. How to fix this?

I installed-enabled MS win media player firefox 1.0.0.8, i still did not get streaming, error box comes up and says 'stream load error', the 'windows media test' thing did not work, i tried iheart radio-no luck, so i disabled win media player plug-in dynamic link library 3.0.2629 and tested and still did not work, i also have plug ins: silverlight 5.0.61118.0 and quicktime 7.6.9 7.6.9.0 enabled. I don't know why all of the sudden i have a stream problem with firefox, yesterday, i tried on IE which i never use and had no problem with it. i will try to do more trouble shooting and see, its really frustrating, if can't figure out, i guess will have to revert back to IE which i really don't want to do, but---oh well. thx for help.

Remove open workitem from user inbox after the workflow starts again.

I have heard that there is a possibility to remove a open workitem from the user inbox, after the workflow starts again for the same object (data update), via a termiantion event. I have searched in the sap workflow dokumentation but i could not find out how to use this. Could somebody provide me some detailed documentation or examples how to use this for my problem?
Thanks,
Steve

Hi Sudhir,
the workitem which should terminate is a decision task with two results. The wolkflow looks as follows:
Activity: Read Data
Decision: Approval Check Decision
Activities: Approve or Reject
How should it look like in your opinion with the termination? How looks this option to terminate this workitem? The workitem should terminate automatically from the userinbox if the workflow starts again for the same object (with updated data).
Thanks,
Steve
Edited by: Steve Malack on Mar 13, 2008 10:20 AM

How to Update employee Effective Start Date

Guys
i am getting error while making terminate of an employee the error is being occurred as "the Person Must Exist as an Employee at the Time Specified by date start". after lot of finding, Ii came to know that the problem is being occur due to mismatch effective start date & original date of hire. so i need to update effective start date instead of Date Start(Hire date).Can you tell any one, Which api need to use update for this issue,
Kindly help me.

There is no API to update effective Start Date column.
Your case falls into the type of data corruption in application tables. You either need to correct the data by yourself or take the help of Oracle support to correct the person data.
If you decide to correct the data without taking help from Oracle support, you can always take help of these forums in doing the same. we will be more than happy to help you. :)

How does the GR processing time affect the scheduling of the process order & the latest start date in the operation.

Hi
Can anyone explain how does the GR processing time affect the scheduling of the process order & the latest start date in the operation overview.

Hi
GR processing time means number of workdays required after receiving the material in storage.
Check this link:GR Processing time
Regards,
Anupam Sharma

Need By Date Should be equal or after the effective start date- error in po_requisitions_interface_all

Similar Messages

Maybe you are looking for