Need description & table name of following field
Hi,
I came across following fields, but not aware of decription & table name.
KSCHL
VKORGAU
VKORG
PSTYV
DATAB
DATBI
please any one can give me description or field name of above fields.
Regards,
KSCHL - Condition Type
Data Type CHAR Character String
Length 4 Decimal Places 0
VKORG - Sales Organization
Data Type CHAR Character String
Length 4 Decimal Places 0
PSTYV - Sales document item category
Data Type CHAR Character String
Length 4 Decimal Places 0
DATUM - Valid-From Date
Data Type DATS Date field (YYYYMMDD) stored
Length 8 Decimal Places 0
DATUM - Valid to Date
Data Type DATS Date field (YYYYMMDD) stored
Length 8 Decimal Places 0
You can check more information about them at SE11 placing them at the Table Field.
There you can see the "Where used" key that will show you where they are used (probably many tables...)
Good Luck !
Plauto
Edited by: Plauto Abreu on Feb 25, 2011 9:23 PM
Similar Messages
-
I NEED THE TABLE NAME FOR THE FIELD DESCRIPTION GIVEN!
I NEED THE TABLE NAME FOR THE FIELD DESCRIPTION GIVEN!
Partner Type
Partner Type Desc
Partner no
Partner Name
Partner Address 1
Partner Address 2
Partner Address 3
Partner Address 4Hi Jyotirmoy ,
You can get all partners and their type in table EDPP1, depending of the partner type you need to go to specific table for address and other details, like for partner type KU(customer) goto KNA1,etc for partner type LI(vendor) goto LFA1 etc for partner type B(bank) goto BNKA etc ....
Sirish -
I need a report with the following fields
Hi All,
I need a report with the following fields & G/L "Expenses" only.
1)G/L Code.
2) G/L Name.
3) G/L Balance
& Selection Criteria From Date, To Date , & Location(for me locations is PROFITCENTRE).
Please some body suggest me an SQL Querry to fetch this result.
Thanks in Advance,
S. MobinHi!
Individual G/L means i didn't understand
check this for only Expence Acc
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @Location nvarchar(20)
set @FromDate = (Select min(S0.RefDate) from jdt1 s0 where s0.Refdate >='[%0]')
set @ToDate = (Select max(S1.RefDate) from jdt1 s1 where s1.Refdate >='[%1]')
set @Location = (Select max(s2.ProfitCode) from jdt1 s2 where s2.ProfitCode = '[%2]')
select
J1.Account,
max(A0.AcctName) as Name,
j1.ProfitCode as Location,
sum(J1.debit-j1.credit) as Balance
From
JDT1 J1,OACT A0
Where
J1.Account=A0.AcctCode and
J1.RefDate >=@FromDate and
J1.RefDate<= @ToDate and
j1.ProfitCode=@Location and
A0.GroupMask = 5
Group By
J1.Account,j1.ProfitCode -
Regarding finding the table name for a field in R12 forms
Hi all,
I need to know how to find the table name for a field in R12. I am working on extracting the employee information but i need to know how to get the table names for the fields.
Thank you,
rajPlease see these threads.
How to find table name in ebs
How to find table name in ebs
E-Business tables
E-Business tables
Thanks,
Hussein -
What is the table name for structure field MUEBS???
Hi...Experts...
How can I know the table for a screen-field if i get structure from it F1 Technical settings....
Ex: Here MUEBS is the screen field (Char. Display) in one of the subscreens of VA41. And it is from
RV45A structure...
Now how can I know the table name for this field MUEBS.
I know some methods but they r not help ful.. please try it and get back to me.
Thanks,
Naveen.INaveen,
Table field Short Description
VBMUE Sales Document: Characteristic Overview
MUEBS Characteristic display
VBMUEZ Sales Document: Characteristic Overview Assignments
MUEBS Characteristic display
VBMUET Sales Document: Characteristic Overview Description
MUEBS Characteristic display
You can find same by SE15>Abap dictonary>fields>table fields.
Amit. -
How to find table name for the fields from Standard Extractor in CRM system
How to find table name of fields from the standard extractor in CRM system ?
e.g. We use LBWE TCode in R/3 system to find table name for the field from Extractor VCSCL(e.g.).
Likewise is there any way to find table name for the fields from Standard extractor like 0CRM_LEAD_I.Hi ,
Please find the link below for understanding BW CRM analysis.
http://help.sap.com/bp_biv135/html/bw.htm
activate the CRM DSs by scenario:
1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
2) Activate the Business Content DataSources (tcode RSA5).
Select/enter the application component and choose Execute (F8).
To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
All BW-Adapter metadata is considered when versions are compared:
Header information (Table SMOXHEAD)
Mapping information (Table SMOXRELP)
Global selection conditions (Table SMOXGSEL)
Attribute key fields (Table SMOXAFLD)
Hope this helps.
Regards,
csm reddy -
How to Identify a table name of a field in the structure
Hi Guys,
I have to identify a application table name of a field , the field is directly mapped with the structure.
please guide me where the physical data is stored.
regards
VasanthHI Vasanth,
You can select Data Type radio button in SE11 and click on search help F4) ..and provide field name or structure name and then select where Used list option .and select table check box..so that you can find multiple tables wherever this structure is used..
U can get multiple tables here if this structures is used for multiple tables.So data related to your field will be storing in multiple tables.
This information may be usefull..
--Manohar -
Bapi Names For Following Fields?
Hi All,
I Want BAPI names For Following Fields.
1.Personnel Area.
2.Personnel SubArea.
3.PERNER
4.OBJID.
5.LAND1
6.REGIO
Thanks
SubbaRao ChintaHi Subbu,
its very difficult to find out the BAPI useing the fileds .
At least you should know the Technical name of your BAPI when you are developing the application.
If you dont know the BAPI name then how can you map it to ur VC user and get the Data.
I think u got my point
Regards,
Govindu -
Table name for the field FAEDT(net due date)
hi every body,
plz can any body tell me the table name for the field net due date(FAEDT).
its very very urgent
thanq.Hi mark chalfen,
thanq very much ur reply.
actually my client want to change the payment term for all the vendor invoices.so wt we did is... we created aprogram to change the old payment term to new payment term in the vendor line items(fbl1n).
when we run the program its changing the payment term and the base line date and the NO of days in the vendor linitems.but it not changing the net due date based on the new baseline date.
i think with out changing the net due date only changing the payment term is use less.coz the item again show as due in the same date.
so how can we change the net due date based on the new baseline date.?from which table we can take the field FAED and update with the new date.
plz advise me?
thanq. -
Hello Every One,
I need a table name which can list all the process chains which is built on an infoobject or infoprovider
Thanks in advance,
Thanks,
NalinIf you are looking for process chains that are loading infoproviders or master data try <b>RSPCCHAIN</b> where version='A' and Process Type='LOADING'.
You may need info in <b>RSLDPIO</b> (and/or <b>RSLDPIOT</b>) to get the infosource name and infopackage name.
Hope this helps. -
What to know the master table for the following fields
I want to know the master table for the following fields.
Company code ( BUKRS )
Chart of depreciation ( AFAPL)
Main Asset Number (ANLN1)
Asset Sub Number ( ANLN2 )
Asset Class ( ANLKL )hi,
1) t001 (<b>for assets T093C</b>)
2) t096
3 and 4) anla
5) anka
rgds Andreas
Message was edited by:
Andreas Mann -
Need Table name for some fields..
Dear Friends
Please help me to find Table names for for the following fields :
1. Document Currency
2. Cleared / Open Item Symbol
3. Transaction
4. Fixed
5. Payment Date
6. Payment Order
7. Payment Sent
thanx in advance..Hi,
Press F1 on the screen where you have seen the fileds.You will get techncail information.click on that button.It will show you the table and field names.
Please let me know if you need more information.
Assign points if useful.
Regards
Sridhar M -
How to get the table name of a field in a result set
hi!
i have a simple sql query as
select tbl_customerRegistration.*, tbl_customerAddress.address from tbl_customerRegistration, tbl_customerAddress where tbl_customerAddress.customer_id = tbl_customerRegistration.customer_ID
this query executes well and gets data from the database when i get ResultsetMetaData from my result set (having result of above query) i am able to get the field name as
ResultSetMetaData rsmd = rs.getMetaData();//rs is result set
String columnName = rsmd.getColumnName(1);
here i get columnName = "Customer_id"
but when i try to get the tabel name from meta data as
String tableName = rsmd.getTableName(1); i get empty string in table name....
i want to get the table name of the respective field here as it is very important to my logic.....
how can i do that.....
please help me in that regard as it is very urgent
thanks in advance
sajjad ahmed paracha
you may also see the discussion on following link
http://forum.java.sun.com/thread.jspa?threadID=610200&tstart=0So far as I'm aware, you can't get metadata information about the underlying tables in a query from Oracle and/or the Oracle drivers. I suspect, in fact, that the driver would have to have its own SQL parser to get this sort of information.
I'm curious though-- how do you have application logic that depends on the name of the source table but not know in the application what table is involved? Could you do something "cheesy" like
SELECT 'tbl_customerRegistration' AS tbl1_name,
tbl_customerRegistration.*
...Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC -
Table name for Reason field in Details tab in CRMD_ORDER transaction
hi ,
kindly pls suggest me the table name for field Reason in Details tab of CRMD_ORDER transaction.
thanksHi,
You need to go via these four tables:
CRMD_ORDERADM_H
CRMD_LINK
CRMD_SRV_OSSET
CRMD_SRV_SUBJECT
/Anders -
How can I get the table name of a field..
Hi,
If we know the table name we can find all the fileds from it
using desc <tablename>.
But, I would like to find table name of a known field's name.
Where all these fields are storing in the database.
THanks in Advance,
Srinivasulu.ALL_TAB_COLUMNS
rgds, APC
Maybe you are looking for
-
Can someone please help me re-install my Creative Design 5.5 on my Mac? My MacBook Pro recently crashed and had to have the hard drive replaced. The back up from Time Machine is not reinstalling the program. Since I have the download paid, and cod
-
Why is my Aperture contact sheet missing photos?
I have 437 photos selected. I choose Print>Contact Sheets. I choose 4 rows/6 columns. But no matter what I do, Aperture will only load 16 images per page. The next page will also have 16 images. I have tweaked the number of columns and rows
-
I use the File Info feature a lot in Loupe View. However recently it does not show despite selecting it in the View>Loupe Info Menu. Control+I also fails to work. It happened before recent upgrade so do not link it with that software change. In the p
-
Looking for a plugin to simulate TV scan lines
The subject title pretty much says it all. Does anyone know of a free or reasonably priced plugin that does scan lines? Thanks in advance.
-
Time capsule. recover files and mount drive
I have tried to recover files from a formated time capsule without success. Problem is I cannot find the drive in disk utilities and can only assume that as a result I cannot find the drive through, File salvage, Stellar Pheonix and disk utilities. I