Need details on how to make custom ABAP report archive enabled

Hi All,
We are working in our project to make custom reports as archive enabled so that they can read archived data.
Need some information on the below queries.
1.Is there any function module to read selected data from archive file? For example i don't want to read the whole BKPF table data from archive file instead want to get belnr and bukrs only.
2. What are the perfromance measure which can be taken while making an existing program archive enabled
3. Important archiving tables which can help for the above.
4. When i use the function module "Archive_open_for_read' then system displays a pop up to select the archive files based on the archive object.
Considering that all the reports are run in background how do i make sure that in background run all the archive files are selected and processed.
Thanks in advance for your valuable suggestions...
Regards/Ajay

Hi Ajay,
1.  You have to create a separate field catelogus and AIS according to your requirement with the required fields you want . Because the standard structures and field catelogues contains many fields from all tables. So before doing the read operation you have to deactivate the standard AIS and activate your newly created AIS .
2. Can you give some more details for this question to be answered.
3. The important archiving tables used are ARCH_IDX,ARCH_RPRG,ARCH_DEF.
4. While scheduling the Read process in batch mode , it will give you three criterias to be entered.
     . Spool Parameters
     (ii). Start date
     (iii). Archive selection of files.
    Unless you enter values for any one of these options , You cannot execute the batch job.
Hope this would help you.
Regards - Swarna.

Similar Messages

  • How to make custom start end shapes for stroke (arrowheads)...

    hello...
    Indesign cs4 have nice start end stroke shapes like arrowheads, circles, squares...circles is clear, without fill. I need fill in it.
    How to make custom shapes or edit existings start/end shapes to functioning like original provided with indesign?
    Maybe illustrator cs4 have this?

    There's no way to edit line endings in ID. You would have to make a compound path from a line with no ending and a second path or shape for the end.

  • Report for COOIS, need details on how to configure and modify

    Hello,
    I want to understand the concept of layout and profile and how are they differenet.
    e.g. If I select a profile from the given F4 help say 00000001 (standard Layout).
    this changes the result output in the object overview screen. why are these 2 different entities. i.e. layout and profile.
    Secondly, I need details on how can I configure the output of the object overview screen, which is the correct place to do this?
    I know its a standard report/transaction, but I have a z-copy of it and I need to modify the same to get the desired results.
    e.g. I want to new buttons with extra functionality to be placed in the object overview sceen.
    Thanks & regards,
    Ravish

    dear friend,
    In the version ECC6.0 there is a configuration transaction  COIS - please run it in your dev environment and make an adjaustents yo need.
    good luck.

  • I want to use Get Panel Image in Labview 5.0.1 and need details on how to save the BMP data generated

    I am trying to generate an application that saves a copy of its front panel on completion. This is easy to do using an invoke node with Print VI to HTML but this does not work in an .exe format. I have seen elsewhere that you have to use the Get Panel Image method, but no details are supplied in LV 5.0.1 documentation of how to use the "image" data (1-D Unsigned Byte array) that is generated. I want to save this in a format that can then be read as a bitmap in any standard graphics package. Any assistance?

    Hi,
    If you'd upgrade to LV5.1 or 6 you could use the 'standard' vi's for this.
    You need a VI called "Write BMP File.vi". It's not shipped with LV5.0.1.
    This vi only uses 3 subVI's, so perhaps someone at NI can convert it and
    send it to you (sorry, I won't, it's copywrited).
    If you cannot get this VI anywhere, you'll need to figure out the BMP file
    format yourself. It's not too complicated, but still could take some days.
    Perhaps someone figured it out before LV5.1 was released.
    Regards,
    Wiebe.
    "RDK" wrote in message
    news:[email protected]..
    > I want to use Get Panel Image in Labview 5.0.1 and need details on how
    > to save the BMP data generated
    >
    > I am trying to generate an application that saves a copy
    of its front
    > panel on completion. This is easy to do using an invoke node with
    > Print VI to HTML but this does not work in an .exe format. I have seen
    > elsewhere that you have to use the Get Panel Image method, but no
    > details are supplied in LV 5.0.1 documentation of how to use the
    > "image" data (1-D Unsigned Byte array) that is generated. I want to
    > save this in a format that can then be read as a bitmap in any
    > standard graphics package. Any assistance?

  • How to make custom ringtones in iOS 5.1

    How to make custom ringtones in iOS 5.1.
    I was on iOS 4.3 before and i used to create the AAC version and then change the file extension & that file would come up in the Rimtones in iTunes, After the iOS 5.1 i m unable to add the custom ringtones to my iPhone from iTunes.

    Was having this problem too.  Discoverd that that there is a "tones" top menu next to "music" under your iphone settings.  I'm not sure if this is new or not (I am a new iphone owner), but if you check on sync tones they will download.

  • All of my apps on my new ipad2 are not working. I had this iPad about 4 months and nothing bad has happened before this. I need help on how to make my apps stop crashing. All my built in apps are fine though.

    All of my apps on my new ipad2 are not working. I had this iPad about 4 months and nothing bad has happened before this. I need help on how to make my apps stop crashing. All my built in apps are fine though. WHATBCAN I DO TO MAKE MY APPS STOP CRASHING. I ALREADY TURNED IT OFF THEN ON AGAIN AN IT STILL CRASHES. HELPPP!!!!

    Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

  • I have garageband 11 and need to know how to make a good deep bass drum that thumps for a rap type song - thanks

    I have garageband 11 and need to know how to make a good deep bass drum that thumps for a rap type song - thanks
    just getting started so I would appreciate some assistance
    Mike

    Quit Mail. Force quit if necessary.
    Back up all data before proceeding.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Mail/V2/MailData
    Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
              Go ▹ Go to Folder
    from the menu bar. Paste into the box that opens by pressing command-V, then press return.
    A folder window will open. Inside it there should be files with names as follows:
              Envelope Index
              ExternalUpdates.storedata
    Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
    Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK. Typically, the process takes a few minutes, but it may take hours if you have gigantic mailboxes. In that case, you may be able to speed things up by temporarily adding your home folder to the Privacy list in the Spotlight preference pane. Remove it when Mail has finished importing.
    Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results.

  • I need to know how to make a game !!!!!

    I am 12 years old and i need to know how to make a game... i'm very good with computers and i just need to know how to make a game.. like runescape.

    you should start with something little, first try do make a rectangle on screen, then try to make it move.
    if you're past that, then you're allmost there.
    of course, eventually during making a game like runescape you would need lot's of knowledge about data structures and matm and physics and whatever is also needed in order to cread 3D universe.
    but with little practice you get to be master.
    good luck.

  • How to make custom binary module and add to powershell?

    How to make custom binary module and add to powershell?
    I wish to add 'Microsoft.SharePoint.Client.dll' in powershell as binary module so I can use its intellisense.

    Hi Biraj,
    I replied to this in other thread
    https://social.technet.microsoft.com/Forums/en-US/a13c9cc8-7d53-46b5-b5bb-65404db2d347/how-to-make-intellisense-enable-in-powershell-in-csom-for-sharepoint-online?forum=sharepointdevelopment
    Kind Regards,
    John Naguib
    Senior Consultant
    John Naguib Blog
    John Naguib Twitter
    Please remember to mark this as answered if it helped you

  • My Apple ID need credits card how to make it to none, My Apple ID need credits card how to make it to none

    My Apple ID need credits card how to make it to none

    You can create an iTune and App Store account without credit card
    1. Sign out of current Apple ID if you are sign-in to one (important)
    2. Go to App Store and select a free app
    3. Tap INSTALL APP
    4. Create New Apple ID
    5. Confirm Your Country
    6. Agree with Terms and Conditions
    7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
    8. Create and answer your secret question
    9. Select NONE for Payment Method
    10. Fill in Billing Address
    11. Submit application for new Apple ID
    12. Wait for verification email
    13. When email arrive, verify your account
    14. Start downloading your free apps

  • I accidently "hide" some of my purchased apps in the app store and need to know how to make them visible again.

    I accidently "hide" some of my purchased apps in the app store and need to know how to make them visible again.

    Mac App Store- Hiding and unhiding purchases

  • BW authorizations objects in Custom abap report

    Hi,
    we develop a BW custom abap report which we have to roll out to certain end users.
    We would like use our BW authorization design, and need therefore to incorperate these auth. objects into the abap.
    What is the best way to this? Can we use function modules?
    Any help welcome?
    Regards,
    Hans

    Hello Hans,
    please check out the following
    http://help.sap.com/bp_biv235/BI_EN/documentation/Authorization_BW_Proj.pdf
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/39f29890-0201-0010-1197-f0ed3a0d279f
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e1cba990-0201-0010-43ae-af579aee7a73
    Hope it helps..
    thanks,

  • How to call  an abap report in BSP..

    hi all,
    Please can anybody tell me how to call an abap report in BSP application.....since I am new to BSP....
    with regards,
    Santosh

    check this thread
    Urgent!!  How to call a custom transaction or an ABAP program in BSP?

  • How to assign  custom rdf report as  stylesheet PO communicator

    R12 :How to assign custom rdf report as stylesheet PO communicator

    Are you trying to have the table where the lines are always be the same size no matter how many lines are present?
    If so, you some choices:
    1) If your lines are always the same height, you might get some ideas on what to do from this article:
    http://oracle.anilpassi.com/xml-publisher-developing-reports-printed-on-pre-printed-stationary.html
    2) If your lines vary in height, then you should look into a PDF template. This will give you a pre-printed stationary look in which the drawing of boxes and lines is not affected by the data content.
    3) Other less attractive options are a) making the report in XSL-FO, and b) making a bitmapped RDF report
    There is currently no solution that I am aware of for a pre-printed stationary look using an RTF template in which the data lines are of variable height.

  • Custom abap report on payload

    Hi
    I want to develop a custom abap report  in XI on the basis of payload.
    Any clues??????????
    Regards
    Vijay

    Hi
    sales orders are sent from RFC to JDBC scenario . now the requirement a report is required to read a particular Interface and its payload. with its start time and finish time
    Let say
    Sales order No
    Item
    Qty
    Processing start time
    Finish time
    Status
    Regards
    Vijay

Maybe you are looking for