Need Feedback- also having trouble

Hi, can you give me feedback on my podcast website? (http://complexicated.podcasting.googlepages.com/index.html) and also I need help in Flash on how to add a link to an outside source from the scrolling text part. Any help is greatly appreciated.

About the scrolling text, I do not know if it is inside the flash file, but I did this using an external text file (html) loaded into flash with css. But it has to be a way
About the site. Nice idea, nice animation. The only thing that do not strikes me is the design. I would like something more minimal but maybe thats just my opinion. First I do not like the use of icons and photographic images. It should be one or another. Than I would minimize the color palette. Browse thru kuler.adobe and find one that you like. I think the dust and scratches from the film (sepia) do not match the bright colors of the left side menu. But than again it just my opinion. Anyway nice idea.

Similar Messages

While using my iPhone the system behavior changed where I now have to click on the app to select it, then double click to launch it. Same goes for entering in my password to access the phone and entering digits to make a phone. I am also having trouble

While using my iPhone the system behavior changed where I now have to click on the app to select it, then double click to launch it. Same goes for entering in my password to access the phone and entering digits to make a phone. I am also having trouble swiping the screen to move to the next page. This is no longer working. I did not change any settings, the phone just started behaving this way. Any ideas on how to revert back to the single click selection/launch? Any assistant is greatly appreciated. Thank you!

Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

I am also having trouble with my cursor freezing after installing Mavericks. Never did it before. I called tech support at Apple and they had me restart computer and mouse together from a complete shut down. So far has seemed to work.

I am having trouble with my cursor freezing between applications after installing Mavericks. Called Apple on my 3 year warranty and opened a case. They suggested a complete shut down of computer and turning off mouse. Then a reboot and turn on mouse. So far iit has seemed to work. Hope this continues??
Hope it helps others.

I think you can solve your problems by removing your AppleID email address from BOTH the Messages setting on your iPhone and the iMessages settings on your Mac.
On iPhone:
Settings > Messages > iMessage > Dissabled
Settings > Messages > Send & Receive > touch the "(i)" < touch "Remove This Email"
On Mac:
Open "Messages" application
Click "Messages menu > Preferences
Click "Accounts"
Select your AppleID account
Under the "You can be reached for messages at" settings, uncheck your AppleID email address and your phone number
Then uncheck the "Enable this account" setting
And lastly, ask all of your friends with iPhones to delete all iMessage conversations (blue bubbles) in their entirety.
To test, send a friend a new text using their phone number (not their email address) and watch the color of the bubble. If it's green then you are using SMS.

Also Having trouble with Safari

I have redownloaded Pantha twice, hoping to redown load Safari but it doesn't work...this is the message I get...Safari cannot open a browser window and may be missing important resources. Try installing Safari again. This started when I did the software update this week. Can I delete the whole program of Safari and then just download Safari and still retrieve my bookmarks and other info without downloading the whole of Pantha.???
I have never had trouble with anything in over 2 years.

Do other devices successfully connect to the network?
Does the iPod successfully connect to other networks?
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router.
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points

I can't close (X) tabs. I'm also having troubles with Facebook (can't sign in/out, upload, etc)

We can't view nor close new tabs.
We can't Log In/Out of Facebook as well as upload photos. We can't also open notifications. HELP!

In the immediate future you can try noscript or flashblock addons to block that script.
However upon more research in searching the current Firefox codebase: [http://dxr.mozilla.org/mozilla-central/search?q=tabbrowser.xml&case=false] it seems to be referenced in there, but I do not see a reference to the port associated. The port is usually used for media. I would not know how to start to troubleshoot this, but are there any consistent steps/webpages that cause this to start?
Does this happen in Safe Mode, please see [[Troubleshoot Firefox issues using Safe Mode]]? And does it happen in a fresh install?

Is there something you can do. I am also having trouble with a document I downloaded that I can only access through adobe. It can not be saved, and I can not email it without losing the information, so I signed up for esign, and this is not working becaus

is there anyone who can help

Hello Shannanc16863471,
How exactly are you sending the document? Are you using Adobe reader to fill and email it? If yes, then can you confirm the version of Adobe Reader you are using?
-Rijul

I am also having trouble with my wifi connection (ipod 4g). it has been three or five days since the last time i connected my ipod with wifi. it always says: "Safari cannot open the page because it is not connected to the Internet"), even though the Wifi

Help me out

Do other devices successfully connect to the network?
Does the iPod successfully connect to other networks?
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router.
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points

Can I download CS4 despite my installation cds are gone? I'm also having trouble signing in to my old Adobe ID.

I'm trying to download Adobe CS4 that I received from Ball State University. I'm trying to sign in to Adobe ID, but my e-mail account has discontinued. Is there any way that I can access the account?

Well I forgot my password, so when I tried to do the forgot password option it sent a message to my old e-mail account that I couldn't access. Luckily I was able to figure out my password, so I'm okay now. Thank you very much for responding.

I am having trouble accessing the iTunes store via iTunes. It shows an error message "iTunes could not connect to the iTunes Store. The network connection timed out..." There is nothing wrong with my connection and I also can't update apps in the app st

I am cannot access the iTunes store via iTunes on my PC and also can not update to 10.6.3. It keeps telling me that my connection has times out and/or check my settings. There is nothing wrong with my setting. I am also having trouble with the app store on my iPhone 4s and can not update apps.
I have signed out of itunes and now cannot sign in again.

I feel you pain i'm haveing the same problems here.
iTunes could not connect to the iTunes Store. The
network connection timed out.
Make sure your network settings are correct and your network
connection is active, then try again.
does anyone plz have some insight for us.

Having trouble setting up Distributed Processing / Qmaster

Hey Guys,
I was able to (at one point) use Compressor 3 via Final Cut Pro Studio with Qadministrator to allow Distributed processing either via managed clusters or QuickCluster - both worked on both macs (a 2007 2.6Ghz Core 2 Duo iMac and a 2009 3.06Ghz Core 2 Duo iMac).
I just upgraded to Final Cut Pro X and Compressor 4. As far as I can tell, the Qmaster settings now reside in the Compressor application itself, so I tried setting it up as best as I could using both the QuickCluster and managed cluster options (very similar to when using the older Qmaster) but no dice. I can see my controller's cluster from the secondary iMac, but it always displays submissions as "Not Available" and it does not help with processing. I've tried everything I can think of - I tried using FCS Remover for the older version of Final Cut, I tried looking around via terminal to see if there are any residual files & settings prior to the FCPX install, I've tried following as many instructions as I could find (including apple's official documentation on Compressor 4 on setting up a cluster) but NOTHING seems to work. I'm at a loss!!
Unfortunately, any documentation or refrences to issues with Qmaster / Distributed processing is related to older versions of Compressor and whatnot.
Can anyone help or have any suggestions? I have no idea how to get this working and I am having trouble finding anything useful online during my research
Perhaps someone is familiar and can help me set it up correctly? I'm verrrry new to Final Cut in general, so I appologize in advance if i'm a bit slow but i'll try to keep up!
Thanks,

In spite of all Apple's hype I'm not sure distributed processing is actually working.
First I ran in to the problem with permisions on the /Users/Shared/Library/Application Support folder. There's some info about that in this discussion. You'll need to fix it on each computer you're trying to use as a node.
https://discussions.apple.com/thread/3139466?start=0&tstart=0
Then I finally found some decent documentation on Compressor 4 here
http://help.apple.com/compressor/mac/4.0/en/compressor/usermanual/#chapter=29%26 section=1
However no matter what I tried I could not get the compression to spread across more than one computer. I tried managed clusters, quick clusters, and even "this computer plus". I was testing on a mac pro, a mac mini, and a macbook air. I could disable the mac pro and the processing would move to the mini, disable the mini and it would move the the macbook air. No matter what I do though it won't run on multiple machines.
I'm also having trouble doing any kind of compositing in FCPX and getting it to compress properly. I see this error
7/20/11 11:07:42.438 PM ProMSRendererTool: [23:07:42.438] <<<< VTVideoDecoderSelection >>>> VTSelectAndCreateVideoDecoderInstanceInternal: no video decoder found for 'png '
and then I end up with a hung job in the Share Monitor that if I try to cancel just sits there forever saying "canceling".
I'm seeing a bunch of Adobe AIR Encrypted Local Storage errors in the log too. Don't know what that has to do with FCPX but I'll have a look and try and figure it out.

Having Trouble With E-mails That Involve Animation

This is too weird. When I receive an e-mail that has animation in it it comes through freeze framed in Mail. It does not matter if it is in my .Mac account or Verizon account. Just for the heck of it I forwarded it to myself using the Verizon account and opened it in Safari. I also did the same thing with my .mac account. I opened it on the web. Bingo, I had animation. I am also having trouble with WMV's. Why can I not get any animation in Mail? Is there something I am doing wrong? any way to correct this?

OK, from the sound of your post, you have a limited knowledge about email. Let me see if I can help. I would guess that you have a Windows machine that you have used in the past. Your email address must be a "pop" address. That means that your internet service provider has a server where your mail is sent. This is different than a web mail address, that is accessed remotely with a web browser, such as Internet Explorer, Firefox, or Safari. You must then be using an email program, such as Outlook Express, to go get the email onto your local machine. Any email program can do this. Open up the accounts tab in Outlook Express, and write down the settings. There will be one for the incoming server, and one for the outgoing server. Now, on your Mac, you can use the email program provided, such as Mac Mail, and put the settings in there. You can now send and receive to your Mac using your supplied email address. You can use another program such as Thunderbird to do this if you want. You don't have to use Mac Mail.
Getting your old email off of the Windows computer is a bit harder, so hopefully you don't need to do that. But if you do, I can direct you on how to do that also.

I'm having trouble writing a polynomial code.

I'm having trouble with a polynomial code I'm supposed to conjour it. It's simply a code that adds, subtracts, and multiplies polynomials. However, there are a few methods I do not know how to come up with (I left them blank), and when I test the code write now, it doesn't work. Here's the code -- can anyone help?
public class Polynomial implements Cloneable {
     private int m_degree;
     private double[] m_coefficient;
     // This is the default constructor
     public Polynomial() {
          super();
          m_degree = 0;
          m_coefficient = new double[5];
     // This allows the user to build a polynomial by putting a constant in
     public Polynomial(double constant) {
          this();
          m_coefficient[0] = constant;
     public Polynomial(Polynomial source) {
     // These are the getters
     public double getCoefficient(int degree) {
          return m_coefficient[degree];
     public int getDegree() {
          return m_degree;
     // These are the setters
     public void addToCoefficient(double amount, int degree) {
          m_coefficient[degree] += amount;
     public void assignCoefficient(double newCoefficient, int degree) {
          m_coefficient[degree] = newCoefficient;
     public void clear() {
          for (int i = 0; i < m_coefficient.length; i++) {
               m_coefficient[i] = 0;
     public void reserve(int degree) {
     // These are other, useful methods
     public int nextTerm(int k) {
          int value = 0;
          return value;
     public double eval(double x) {
          double value = 0;
          // This goes through all the exponents in the polynomial
          for (int i = 0; i < getDegree(); i++) {
               // += allows you to add instead of overriding the next term
               value += getCoefficient(i) * Math.pow(x, i);
          return value;
     // Here is our addition method
     public static Polynomial add(Polynomial p1, Polynomial p2) {
          Polynomial newPolynomial = new Polynomial();
          // We have to find the bigger polynomial so we know how to set the loop
          if (p1.getDegree() >= p2.getDegree()) {
               for (int i = 0; i < p1.getDegree(); i++) {
                    newPolynomial.addToCoefficient(p1.getCoefficient(i)
                              + p2.getCoefficient(i), i);
          } else {
               for (int i = 0; i < p2.getDegree(); i++) {
                    newPolynomial.addToCoefficient(p1.getCoefficient(i)
                              + p2.getCoefficient(i), i);
          return newPolynomial;
     // Here is our subtraction method
     public static Polynomial subtract(Polynomial p1, Polynomial p2) {
          Polynomial newPolynomial = new Polynomial();
          // We have to find the bigger polynomial so we know how to set the loop
          if (p1.getDegree() >= p2.getDegree()) {
               for (int i = 0; i < p1.getDegree(); i++) {
                    newPolynomial.addToCoefficient(p1.getCoefficient(i)
                              - p2.getCoefficient(i), i);
          } else {
               for (int i = 0; i < p2.getDegree(); i++) {
                    // The order is important with subtraction so they cannot be
                    // switched
                    // The equation is allowed to be negative, but the exponent
                    // cannot be
                    newPolynomial.addToCoefficient(p1.getCoefficient(i)
                              - p2.getCoefficient(i), i);
          return newPolynomial;
     // Here is our multiplication method
     public static Polynomial multiply(Polynomial p1, Polynomial p2) {
          Polynomial newPolynomial = new Polynomial();
          if (p1.getDegree() >= p2.getDegree()) {
               for (int i = 0; i < p1.getDegree(); i++) {
                    newPolynomial.addToCoefficient(p1.getCoefficient(i)
                              * p2.getCoefficient(i), i);
          } else {
               for (int i = 0; i < p2.getDegree(); i++) {
                    newPolynomial.addToCoefficient(p1.getCoefficient(i)
                              * p2.getCoefficient(i), i);
          return newPolynomial;
     // Here is our clone method
     public Polynomial clone() {
          Polynomial poly;
          try {
               poly = (Polynomial) super.clone();
          } catch (CloneNotSupportedException e) {
               throw new RuntimeException(
                         "Class does not implement cloneable interface");
          return poly;
}

We've been working with arrays, and we have to write a code that adds, subtracts, and multiplies polynomials. I'm having trouble with a few of the methods. I've assigned m_degree and m_coefficient as the fields I need to use.
Right now, as my code stands, when I test it with a polynomial in main, it doesn't work. So right now, there's a mistake preventing what I have so far from properly functioning.
I am also having trouble writing the following methods:
reserve: We have to allocate memory to the polynomial every time it changes so we make sure we always have enough space to work with it.
nextTerm: We need this to jump to the next term in the polynomial, but I'm not quite sure how to do it. I didn't even realize it was possible.
I'm horrible at commenting and explaining my code, but if you read over it just a little bit, you may be able to get the gist of what I'm trying to do. Thanks for any help, and sorry if I can't explain well.
public class Polynomial implements Cloneable {
private int m_degree;
private double[] m_coefficient;
// This is the default constructor
public Polynomial() {
super();
m_degree = 0;
m_coefficient = new double[5];
// This allows the user to build a polynomial by putting a constant in
public Polynomial(double constant) {
this();
m_coefficient[0] = constant;
public Polynomial(Polynomial source) {
// These are the getters
public double getCoefficient(int degree) {
return m_coefficient[degree];
public int getDegree() {
return m_degree;
// These are the setters
public void addToCoefficient(double amount, int degree) {
m_coefficient[degree] += amount;
public void assignCoefficient(double newCoefficient, int degree) {
m_coefficient[degree] = newCoefficient;
public void clear() {
for (int i = 0; i < m_coefficient.length; i++) {
m_coefficient[i] = 0;
public void reserve(int degree) {
// These are other, useful methods
public int nextTerm(int k) {
int value = 0;
return value;
public double eval(double x) {
double value = 0;
// This goes through all the exponents in the polynomial
for (int i = 0; i < getDegree(); i++) {
// += allows you to add instead of overriding the next term
value += getCoefficient(i) * Math.pow(x, i);
return value;
// Here is our addition method
public static Polynomial add(Polynomial p1, Polynomial p2) {
Polynomial newPolynomial = new Polynomial();
// We have to find the bigger polynomial so we know how to set the loop
if (p1.getDegree() >= p2.getDegree()) {
for (int i = 0; i < p1.getDegree(); i++) {
newPolynomial.addToCoefficient(p1.getCoefficient(i)
+ p2.getCoefficient(i), i);
} else {
for (int i = 0; i < p2.getDegree(); i++) {
newPolynomial.addToCoefficient(p1.getCoefficient(i)
+ p2.getCoefficient(i), i);
return newPolynomial;
// Here is our subtraction method
public static Polynomial subtract(Polynomial p1, Polynomial p2) {
Polynomial newPolynomial = new Polynomial();
// We have to find the bigger polynomial so we know how to set the loop
if (p1.getDegree() >= p2.getDegree()) {
for (int i = 0; i < p1.getDegree(); i++) {
newPolynomial.addToCoefficient(p1.getCoefficient(i)
- p2.getCoefficient(i), i);
} else {
for (int i = 0; i < p2.getDegree(); i++) {
// The order is important with subtraction so they cannot be
// switched
// The equation is allowed to be negative, but the exponent
// cannot be
newPolynomial.addToCoefficient(p1.getCoefficient(i)
- p2.getCoefficient(i), i);
return newPolynomial;
// Here is our multiplication method
public static Polynomial multiply(Polynomial p1, Polynomial p2) {
Polynomial newPolynomial = new Polynomial();
if (p1.getDegree() >= p2.getDegree()) {
for (int i = 0; i < p1.getDegree(); i++) {
newPolynomial.addToCoefficient(p1.getCoefficient(i)
* p2.getCoefficient(i), i);
} else {
for (int i = 0; i < p2.getDegree(); i++) {
newPolynomial.addToCoefficient(p1.getCoefficient(i)
* p2.getCoefficient(i), i);
return newPolynomial;
// Here is our clone method
public Polynomial clone() {
Polynomial poly;
try {
poly = (Polynomial) super.clone();
} catch (CloneNotSupportedException e) {
throw new RuntimeException(
"Class does not implement cloneable interface");
return poly;
}

Having trouble getting rid of all of the mackeeper ads that I keep on getting Safari via Mozilla Firefox

I mean after I clicked on ad for mackeeper, by accident. Its been happening for almost a wk now. Even after trying to keep fixing it myself. In which I finally decided to remove Mozilla Firefox altogether because I been getting them on there as well. In which I went to Opera Web Browser because after all I found it via the app store. At the same time I'm also having trouble with getting used to Opera again. Basically, have already tried Opera, but had trouble with it and went back to Mozilla Firefox after that until now.

There is no need to download anything to solve this problem.
You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Having trouble with iphone and ipad syncing

Just got my iphone. Trying to get music on it. Only problem is that my daughter has an ipad that wants to sync all of her apps on to my iphone. the music is ok because its in a playlist. The apps try to sync even though I have checked it to not sync the apps. Dont know how to seperate the two different itunes. Also having trouble getting itunes to recognize my card number to purchase music.

Well, if "deleted the account" actually means simply removed using that account on the iPad, and if the account turns out to be an iCloud account, then you would have no problem.
Simply go to Settings > iCloud on your iPad and turn on Notes.
But you've given us so little information (e.g., was your account in iCloud? Dles "deleted" actually simply mean removed from iPad?) that it's hard to tell if this would actually solve your particular issue.

I'm having trouble resetting my itouch, but it just freezes on me. what can i do?

i'm having a problem resetting my ipod touch, and also having trouble with app store app. the problem im having is with the search and it keeps shutting off and takes me back to home. is there a solution to the problem? thanks

I have not heard of a solution for the App store crashing after iOS 6 update.

Need Feedback- also having trouble

Similar Messages

Maybe you are looking for