Need few clarification in shipping

Hi,
1.please tell me how to find whether the shipping is multi stage or single stage shipment.
2.to find customer shipments and STO shipments
Regards,
Achu

Hello,
        If you want to do it Programatically, then here is the Key.
1. Finding whether the shipment is a single Stage or Multiple
    stage Shipment. You can input the Shipment Number in the
    VTTS Table to find out the Number of Stages.
2. Finding whether the Shipment is a Customer Shipment or
    STO Shipment.
    We can make use of the document flow Table VBFA to drill
    down to the Initial Documnt of the Shipment.
Thanks and Regards,
Venkat Phani Prasad Konduri

Similar Messages

HT201209 How to get an itunes gift card code, no need to wait for shipping

Good day to all,
I want to get an itunes gift card just to download whatsapp on my iphone 3gs. I have my credit card but the billing address is in Haiti, unfortunately Haiti is not in your list of countries. How can I get itunes gift card code immediately in order to download that application? No need to wait for shipping, just want to have the code to add it to my apple account.
If you have a better solution, it's welcome.
Thank you in advance for your reply

Sorry, but you can't, if you live in Haiti. As you say yourself, there is no iTunes Store for Haiti and you are not allowed to use the iTunes Store of any other country.
If you live in a country where there is an iTunes Store, check to see if Apple sells physical gift cards in your country and if so purchase and redeem one of those. There is no way to purchase an electronic gift certificate from Apple without a credit card from the country whose iTunes Store you wish to use.
Regards.

I need a clarification : Can I use EJBs instead of helper classes for better performance and less network traffic?

My application was designed based on MVC Architecture. But I made some changes to HMV base on my requirements. Servlet invoke helper classes, helper class uses EJBs to communicate with the database. Jsps also uses EJBs to backtrack the results.
I have two EJBs(Stateless), one Servlet, nearly 70 helperclasses, and nearly 800 jsps. Servlet acts as Controler and all database transactions done through EJBs only. Helper classes are having business logic. Based on the request relevant helper classed is invoked by the Servlet, and all database transactions are done through EJBs. Session scope is 'Page' only.
Now I am planning to use EJBs(for business logic) instead on Helper Classes. But before going to do that I need some clarification regarding Network traffic and for better usage of Container resources.
Please suggest me which method (is Helper classes or Using EJBs) is perferable
1) to get better performance and.
2) for less network traffic
3) for better container resource utilization
I thought if I use EJBs, then the network traffic will increase. Because every time it make a remote call to EJBs.
Please give detailed explanation.
thank you,
sudheer

Please suggest me which method (is Helper classes or Using EJBs) is perferable :
1) to get better performance
EJB's have quite a lot of overhead associated with them to support transactions and remoteability. A non-EJB helper class will almost always outperform an EJB. Often considerably. If you plan on making your 70 helper classes EJB's you should expect to see a dramatic decrease in maximum throughput.
2) for less network traffic
There should be no difference. Both architectures will probably make the exact same JDBC calls from the RDBMS's perspective. And since the EJB's and JSP's are co-located there won't be any other additional overhead there either. (You are co-locating your JSP's and EJB's, aren't you?)
3) for better container resource utilization
Again, the EJB version will consume a lot more container resources.

Need some clarification on Replacement Path with Variable

Hello Experts,
Need some clarification on Replacement Path with Variable.
We have 2 options with replacement path for characteristic variables i.e.
1) Replace with query
2) Replace with variable.
Now, when we use "Replace with variable" we give the variable name. Then we get a list for "Replace with" as follows:
1) Key
2) External Characteristic Value Key
3)Label
4)Attribute value.
I need detailed explanation for the above mentioned 4 options with scenarios.
Thanks in advance.
Regards
Lavanya

Hi Lavanya,
Please go through the below link.
http://help.sap.com/saphelp_nw70/helpdata/EN/a4/1be541f321c717e10000000a155106/frameset.htm
Hope this gives you complete and detailed explaination.
Regards,
Reddy

Need a clarification in File to File scenario...

Hi frens,
I need a clarification from you allu2026.
Normally in file to file scenario, the input file will be picked from a directory location and after processing output file and that will be placed in the output directory location specified in the receiver communication channel.
In the sender communication channel for the scenario mentioned above, if the processing mode is given as delete, the input file will be u201Cdeleteu201D as soon as the file was successfully read by the adapter, but this will not ensure that the file processing is complete and the output file is being created.
But can we create a scenario which will ensures that the input file is deleted from the input folder only if the complete process is successful and the output is generatedu2026.
Thanks in advance,
Vardhani...

Dear Experts,
I need your help on the below issue i am facing
In File - RFC scenario, I am using the following beans to write the rfc response into file on file sender adapter
Number - Module Name u2013 Module Type u2013 Module Key
1- AF_Modules/RequestResponseBean - Local Enterprise Bean - 1
2- localejbs/CallSapAdapter - Local Enterprise Bean - 2
3-AF_Modules/ResponseOnewayBean - Local Enterprise Bean - 3
I need to delete the incomming file after processing.
Problem 1:
When i use QOS as BestEffort , The input file is not getting deleted and nor archived after processing and file sender communication channel shows null pointer exception.
Problem 2:
When i use QOS: exactly once, The file is getting deleted and getting archived, But some time i getting error in moni, Message already exists like GUID ALREADY EXISTS
Appreciate your immediate help.
Thanks and Regards.
Sravya.

Needed urgent clarification on FILE TO IDOC scenario

Hi Experts,
                  I need urgent clarification on FILE TO IDOC scenario plz clarify it
1.In FILE TO IDOC scenario after creation of RFC dest ,performing steps in IDX1&IDX2
what configurations to be done on target system?
2.In some blogs it is given that steps should be done in RFC dest,we21,we20 .
But is it mandatory to do so RFC dest and WE21 steps [OR] directly can we configure partner profile in WE20?
3.on integ server IDX2 has to be done (or) is it optional for FILE TO IDOC scenario?
Too many to answer plz clarify good explanations will be rewarded.
                                                                                Regards,
                                                                                Vinod.

Hi,
Please follow the below process for configuration:
Pre-requisites for Inbound IDoc to R/3 from PI:
Configuration required at Xi side:
Go to IDX1: configure the port.
Go to IDX2: load the DOC metadata.
Go to SM59: Create RFC destination which points to R3 system this is require in the case where your IDOC is sent to R 3 system,
Configiration required at R3 side:
Maintain Logical System for PI (SALE transaction):
Maintain Partner Profile for XI system(WE20):
Pre-requisites for Outbound IDoc from R/3 to PI:
Configurations required in R/3:
Maintain Logical System (SALE)
Define RFC Destination (SM59) which points to PI system
Maintain Port (WE21)
Maintain partner profile. (WE20):
Maintain Distribution Model (BD64):
DO let me know if you need more information
Thanks and Regards,
Chirag Gohil.

Need some clarifications on Quality-of-services

Hi Everybody.
I need some clarification on Quality-of-services.the question is which one is better in Quality-of-services (Exactly-Once or Exactly-Once-In-order)?why?wht is the differenc between them?

Hi Narayana
refer the below Urls
make the QOS of file as EO or EOIO and then use this blog,
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
It depends upon the Adapter,Can you please spicific
http://help.sap.com/saphelp_erp2005vp/helpdata/en/41/b714fe5ffc11d5b3ea0050da403d6a/content.htm
Check these blogs written on QoS:
XI Asynchronous Message Processing: Understanding XI Queues
How to deal with stuck EOIO messages in the XI 3.0 Adapter Framework
EO = Exactly Once ( Used in Asynchronous Communication)
EOIO = Exactly Once In Order ( Used in Asynchronous Communication)
BE = Best Effort ( Used in Synchronous Communication)
Best Effort --> Used for Synchronous Calls.
EO and EOIO --> Asynchronous Calls.
EOIO --> Asynchronous with Sequential Processing Guranteed.
http://help.sap.com/saphelp_nw04/helpdata/en/41/b714fe5ffc11d5b3ea0050da403d6a/frameset.htm
For the QOS, u can refer the following library links .
http://help.sap.com/saphelp_nw04/helpdata/en/41/b714fe5ffc11d5b3ea0050da403d6a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ae/d03341771b4c0de10000000a1550b0/frameset.htm
For receiver channels QoS BE (Best Effort) will result in a
synchronous call (sRFC) , QoS EO (Exactly Once) will create a
transactional call (tRFC) to the BC. For sender channels a synchronous
call (sRFC) will result in a message with QoS BE, a transactional call
(tRFC) will result in a message with QoS EO.
QoS EOIO is not supported by the BC-Adapter.
SAP XI term Quality of service describing how the transmission and process-ing of messages is to be handled. Possible values are:
BE = BestEffort (synchronous call, no transactional guarantees for transmission and processing)
EO = ExactlyOnce (asynchronous call, guarantee for local transactional handling, exactly-once transmission and exactly-once processing)
EOIO = ExactlyOnceInOrder (as for EO but with serialization guarantee on a given queue name).
Pls reward if useful

Need help regarding the few clarification in writing cmod

Hi All,
I need to write a cmod by creating a new project for that. The main purpose is to define variables in it which will be used in reporting(restrictions).
Now I need to enhance that structure with RSR00001 code since it dealys with declaring the variables.
But this enhancement code is being used in some other project as well, because of it I am unable to use it in my project..
Can you please explain me how can I overcome this situation.
Thanks,
vinay.

Hi Vinay,
Write this code in CMOD :
data:
z_include type program,
Z_return.
when others.
* Select the include program using the variable
    perform select_include using    i_vnam
                           changing z_include
                                    z_return.
    check z_return = 0.
* Check that include program exists
    perform check_include_program using    z_include
                                  changing z_return.
    check z_return = 0.
* Process the appropriate variable by calling the generic form
* 'PROCESS_VARIABLE' in the include program just selected
    perform process_variable in program (z_include)
                             tables   e_t_range
                                      i_t_var_range
                             using    i_vnam
                                      i_vartyp
                                      i_iobjnm
                                      i_s_cob_pro
                                      i_s_rkb1d
                                      i_periv
                                      i_step
                                      lv_zs_bsw_offset
                             changing e_meeht
                                      e_mefac
                                      e_waers
                                      e_whfac
                                      c_s_customer.
FORM select_include using    p_var
                     changing p_include
                              p_error.
select single zinclude
    into p_include
    from zvariables
    where zvarname = p_var.
p_error = sy-subrc.
ENDFORM.
form check_include_program using    p_include
                            changing p_error.
data:
    l_name type programm.
select single name
    into l_name
    from trdir
    where name = p_include.
p_error = sy-subrc.
endform.
Then you can create a table having two column, variable value and its corresponding program.
You will then not need to disturb the CMOD Code.
-Vikram

Need a Clarification in defining a Partner Profile

Hi Experts,
I have a requirment wherein i need to send delivery idoc delvry01 for all the deliveries created for a shipping point.
I have created a output type ZLD0 and has Shipping point as the access seq. I have maintained condition records for the shipping point to create idocs for.
I have created partner profile with the logical system. But its not working.
Is there anyway to trigger idoc on the delivery document by not defining each and every customer on the partner profile.
i mean to say in this case how to create the partner profile, is it with logical system or Customer number. if it is with customer number, if i have 1000 customers, creating 1000 Partner profiles is doesn't make sensce...
Please clarify this...
Thanks in Advance
Narendra.

I haven't done this for deliveries but we did something similar for the Purchase Orders, so maybe this will give you some food for thought.
We defined one Logical System per Purchasing Organization. Unfortunately, the PO output could not have been assigned to the 'logical system' partner type. So what we ended up doing - we created a new outout type ZNEU (copy of standard NEU) and set up access sequence Doc.Type / Purch. Org. / Vendor. Then in MN04 for this option we added a record for each Purchasing Org (EKORG) and all the applicable Vendor Numbers. It is pain in the back but it's much faster than creating individual profiles.
Now when I look at the PO output there is a line with ZNEU and vendor # as a partner but when I run RSEOUT00 I get an IDoc for the whole Purchasing Org.
So replace Purch. Org with Shippint point and Vendor with Customer and it's pretty much your scenario. I'm not sure what's the SD transaction similar to MN04, try VV31.
Good luck!

Inco terms needs to copi from ship to

HI,
We have a requirement as,when we create a sales order needs to copi incoterms of ship--to party in to the order
not from sold--to .,if we have different soldto and ship to,How to get this

I believe you aware of that as per standard SAP, Incoterms proposed into sales document on the bases of Sold-to party.
So, you need to go for enhancement for your requirement.
To do so, take help of ABAPer in your team and use user exit MV45AFZZ. in the Form USEREXIT_MOVE_FIELD_TO_VBKD.
Regards
JP

Need Few Jars for RAS Server use!!!

com.crystaldecisions.sdk.occa.infostore.*,
com.crystaldecisions.sdk.plugin.desktop.common.*,
com.crystaldecisions.sdk.framework.*,
com.crystaldecisions.sdk.occa.security.*,
com.crystaldecisions.sdk.exception.SDKException,
com.crystaldecisions.sdk.occa.managedreports.IReportSourceFactory,
java.util.Locale,
com.crystaldecisions.sdk.occa.report.reportsource.IReportSource"
Hi all,
The above mention are few classes available in some jars.
Can anbody help me to find and download those Jars.
Thanks in advance,
Saravanakumar.

Could you not save money and buy a photon for use with your existing server? You could install 2 HBAs and use it in split bus mode.
For true redundancy however, you need 2 servers ideally in 2 locations. ;o)

Just needed some clarification regarding the Viewer Builder and actually publishing your App...

If someone could let me know if my understanding is correct, that'd be a huge help... So I've designed my publication in InDesign and exported the .zip file from the Folio Producer. I've created all of my certificates/splash screens/icons. Lastly, I just recently went through the steps of the Viewer Builder. I'm now at the stage of this process that requires me to purchase the $395 single edition so that I can enter the serial number in the last stage of the Viewer Builder. Now, to my knowledge, once I get the serial number, Viewer Builder will then give me access to an .ipa file and a .zip file. The .ipa file is for me to test on my iPad, and the .zip would be used to distribute to the App Store. I guess this is where I get confused... Let's say after I test the .ipa on my iPad, I don't like some part of my publication. I know how to update my own documents obviously, and I understand that I would have to export another .zip file from the Folio Producer, in turn requiring me to edit the exported folio link in the Viewer Builder. If I had to do that, would I need to purchase another single edition serial number since the original App was edited? Or would the same serial number apply since I'm editing that same App in the Viewer Builder? My next question is somewhat similar. Let's say all of the information is up to date and I go ahead and publish the App to the App Store. However, maybe a month later or some time in the future, I needed to update a phone number or email address--some little detail like that. Again, I understand that I'd have to update the export link in the Viewer Builder, but would I then need to create a new app since my app was already published? Would I then have to purchase another $395 single edition serial number just so that I can update my information? This seems to be the only thing in this whole process that I could use some clarification on so that I don't run into any surprises in the future. Any help would be great, thanks!

Hi Joshua,
When you have purchased the serial, you can rebuild your app with your updated content, as long as you use the same bundleID (applicationID), that is tied to your Apple mobile provisioning profile. The serial number is valid for a one year period.
After you have submitted your app to Apple and it has been approved, please read: http://forums.adobe.com/message/4172167#4172167
With kind regards,
Klaasjan Tukker
Adobe Systems

AS2 Sender Adapter -- Need few details.

Hi Seeburger Experts,
Im new to seeburger and i just to know regarding AS2 adapter.
Im a bit clear about the AS2 receiver adapter there we have an option of giving partner Server,URL and Port to send the messages from XI.
In the same way, I couldn't find the fields for AS2 Sender adapter to provide Server,Port and URL.
So im just wondering how we will be receiving the messages from Partner system thorugh AS2 adapter.?
as we are not providing any information like URl,port,path or Directory.. etc
Can anyone pls share ur answers.
Thanks&Regards
Deepthi.
Edited by: deepthi reddy on Dec 24, 2007 5:35 AM

HI Deepthi,
We need to give the AS2ID in the party identifier tab,AS2ID that is entered here will be used for identifying the sender and receiver of the document.
1)The value of the Agency field must be Seeburger.
2)The value of the Schema field must be AS2ID.
Every partner is assigned the WAN no which is provided by the WAN service provider. That WAn no we need to configure in the party identifier tab.
I hope It is clear to u now.
Thnx
Chirag.

Need some clarification in WSDL based Proxy & Business Services

Hi,
Whenever we configure a Proxy service or Business service based on a WSDL, we use to select Port option instead of Binding when selecting our WSDL for the proxy/business service. Now my ques is why we go for a port instead of binding? what is the difference between them?
My ques may seem very basic but i have this doubt for long time so i am postin this.
Thanks,
Arun

Hi Arun,
In my opinion that is not such a big deal, and in most of the cases you can choose any of the options...
I usually prefer port because it keeps the service name... If you are proxying someone else's service it is better to keep it in a way that the service consumer doesn't notice the difference...
I'm guessing there are cases out there where the service consumer client requires that the binding operations be unchanged... But I've never came across with one of them...
Hope that clarifies...
Cheers,
Vlad

Hi frnds, need some clarification on OBIEE.

How the details of the reports created in OBIEE gets saved? Database or FlatFile. I have created some reports in OBIEE but not able to find the structure of the report or data stored in table in the database. Kindly help in figuring out this. Thanks in advance. Have a nice day.

Details of the report get stored in the Web catalog and web catalog reside on the Weblogic Server.If you want to store report details like Logical Query,Creation Time,Creation Date....etc then you need to enable Usage Tracking,Where this information will store in the database,If you want to export you can do that into a flat file,
Do let me know if you need any support in enabling usage tracking.
Mark if helps,
Thanks,
Sasi Nagireddy

Need few clarification in shipping

Similar Messages

Maybe you are looking for