Need Fields KDAUF, KDPOS, BWART update in table GLPCA for movement type 633
Hi All,
I need following field update in Table GLPCA for movement type 633 (Consignment Issue):
KDAUF : sale document no.
KDPOS : Order Line Otem
BWART : Movement Type
The same fields are updated for movement type 601 (Standard order). Also I checked with Table MSEG and find the same as above.
Thanks in advance.
AT
You should use the BAPI instead BAPI_GOODSMVT_CREATE
of BDC.
http://www.sap-img.com/abap/bapi-goodsmvt-create-to-post-goods-movement.htm
Welcome to SDN. Please be sure to award points for any helpful answers and mark your post as solved when solved completely. Thanks.
REgards,
Rich Heilman
Similar Messages
-
Hide/Suppress Cost center field in MIGO and MB1A for movement types 551&552
Hi All,
Can anybody tell me how to suppress or hide the cost center field in MIGO or MB1A for movement types 551 and 552?
I did below settings and it worked fine for only MB1A and for MIGO still it is showing cost center field.
IMG > Materials Management > Inventory Management and Physical Inventory >Goods Issue/Transfer posting > Define screen layout > select movement type to change the option.
Also I did gothrough the settings for Enjoy transaction (MIGO) there we have only option to make fields either "Required entry" or "Optional entry" and we don't have an option to hide/suppress.
Please advise or help me .
Thanks in advance!
Regards,
PraveenHi
The cost center field is a required field in mvt type 551 as you are scrapping materials, some cost center will need to take the cost of this operation.
Anyway, you first need to make the field as optional for example, before you move.
One option is that you create a screen variant in Tcode SHD0 for MB1A, where 551 is setup as constant (with content) , and mark Cost center as invisible and assign this screen variant to a transaction in SE93.
regards
Sidi -
FIELD SELECTION FOR MOVEMENT TYPE AND ACCOUNT
Hi,
I am trying to do the Post Goods Issue (PGI).
But, the system is throwing an error as mentioned below.
Field Selection for Movement Type 901 / Account 4070000001 differs for Customer Goods Movement (015)
I made the Cost Center as Required Entry. But, there was no effect on the PGI.
I could not make out the exact error.
Please guide me properly in this regard and do the needful.
Thanks in advance.
Thanks & Regards,
Srinivasa M.S
+91-9910077829Hi,
On the Error message detail, system will guide you to the Configuration details for Field settings for Movement type & Account, please get in touch with your FI consultant, to make the Field selection for the account similr to that of your movement type, this is a very common issue.
Regards
Chandra Shekhar -
No entry found in table SMOFQFIND for BDoc type SI_CONTRACT
Hi Gurus,
I try to do a request dowload for SI_CONTRACT object.
When execute and monitor my request objects the status is OK.
Then, I check the BDocs Message Trace and I see the following error
"No entry found in table SMOFQFIND for BDoc type SI_CONTRACT - Queue name used: CRI_SI_CONTRACT (see note 677800 for further info"
Does anyone know how to resolve this issue?
Thanks,
M@leHi Brian,
There was leading 0 for the contract # in the request detail, however this message is still in the BDoc message trace. The BDoc was posted successfully. I checked the table SMOFQFIND and could not find the entry for BDoc type SI_CONTRACT.
There are records for SI_CONNOBJ and SI_POD which are all delivered by SAP. I think we just need to maintain SI_CONTRACT in this table to get rid of this message. Just I do not know what exact to maintain for SI_CONTRACT.
Could you help to check standard SAP environment to see what is the detail for SI_CONTRACT in table SMOFQFIND?
Thanks,
ZJKong -
Field Selection error for movement type and G/L account
I am currently experiencing a field selection error between movement type 601 and G/L account 7140000. The problem field is 'Segment'. This field is set to required for the G/L account, but it is hidden for the movement type 601. This inconsistency causes an error when posting the goods movement. According to business requirement the field must be required for the G/L account, therefore we must make this field optional for the movement type.
However, in configuration the field segment does not appear for the movement type 601. Therefore it can not be changed to optional.
Does anyone know a workaround other than making this field optional for the G/L account because the business requirement is to have this field as required?????
Many ThanksHi,
On the Error message detail, system will guide you to the Configuration details for Field settings for Movement type & Account, please get in touch with your FI consultant, to make the Field selection for the account similr to that of your movement type, this is a very common issue.
Regards
Chandra Shekhar -
Field selection for movement type 601 account 894025 differs for cutomer
While posting goods after saving delivery merror message
Field selection for movement type 601/aact 894025 differs for customer goods movement
I tried OMJJ>Mvtmt Type>601>Field selection enjoy>601 KONTO Optional field
Now this is only happening in the cases where I have assigned free goods Inclusive 10MT. If the order is less than 10MT (that is if no free goods attached) posting is accepted & billing & account determination is processed successfully.
I am unable to identify the reason though I have worked a lot on MM/Fico on the system.
Please provide your valued inputs why this is happening?
Thanks for your time.
RajivHi Raja,
Thanks for prompt reply.
I shall appreciate if you elaborate how to check
check the Field selection goup in control tab for that GL
I tried OBC$--> (Is this correct?)
I checked cost center field G004 -->Addl Act assignemtn -->Cost center which is Optional entry. Should I check any other items on the screen as I am unable to understand which field is applicable on a/c field.
Profit center, cost object are in G004 as supressed field.
So should I make optional? So thing will work.
Other Q should I also consider G025 Inventory adjustment account? As per error this a/c is not shown. So pl advise me steps or heading which I should consider.
Thanks for yr time.
Rajiv -
Field Seletion for movement type / acct differes for BA
dear all
while posting in MM the user is facing the problem and error message
Field Seletion for movement type / acct differes for BA
please let me know if i can do some thing with Field status variant in FI
I am not able to figure this outIf you Run Program RM07CUFA in SE38 and compare movement type and GL you can see the
comparison of the field status variant of the movement type and GL
Hope this will resolve your issue
Bilal -
How can I add Vender Batch FIELD for Movement Type 511
Hi, guys,
I tired to add a Vender Batch FIELD (LICHA) entry for Movement Type 511 through OMJJ/Field selection(Enjoy), but it's not allowed, is there any approach else to get it done? Thanks.
MichaelHi,
Try this path as SPRO-Materials Management-Inventory management and physical inventory-settings for enjoy transactions-settings for goods movement(MIGO)--field selection per movement type.
If you add the field LICHA for movt 511.Make it optional or required entry whatever you want. It will come at the time of MIGO.
Regards,
Goraksh. -
How to set field "vendor" as optional for movement type 221
Hello experts, I want to set the field "Vendor"(LIFNR) as optional for movement type 221 when create reservation using T-code MB21. As far as I know, field selection of reservations is determined by the settings in the field selection(from201) of the movement type. But even when I have set the field "Vendor" as "optional" both in field selection (from 201) and field selection (Enjoy) for mvt 221 using T-code OMJJ, it is still not shown on the screen of creating reservation. Is it the SAP inside logic that restrict this field for movement type 221 or should I change any other settings elsewhere?
Any help will be highly appreciated.
Best regards!Let me understand ,
u want to reserve stock with MB21 with optional for vendor code or name .
then against the reservation u was t to issue to cost centre or production with 201 rt .
If so hopefully this scenario excludes the normal production order process ( cozz their GI is w.r.t prd order only since reservation is created at backend and also shown in prod order).
ur req is normally for consumables or spares etc and u want o track the vendor also in the Reservation .
possible check is Movement type - screen in omjj
GL account variant settings
MB1a setting
last option - create a screen variant with SHDO tode and activate it .
all will be at client level so please -
New Field addtion for movement types
Hi Everyone,
I want to add new field for movement type 301(vendor material no)can you please guide me how to accomplish this task.
Thanks
VenkatDear,
Do the 311 movement through the MIGO and then set field for MIGO
Vendor Material No. GOITEM-IDNLF
Vendor Material No. GOSEARCH_PO-IDNLF as highlited filed in OMJX
Or else with MB1b you can use the text fiied for Vendor Material no.
Hope it will solve ypur problem.
Regards,
R.Brahmankar -
Table MSEG with movement type 541
Dear All,
In order to display the PO number, we maintain the customizing for
movement type 541 in Transaction Code OMBW. Here we change the indicator
From 'Suppress' inot 'Opt. entry', then the created material document
will display the PO number in Table MSEG.
Similarly if we want to display PO line item number,in which part we should do the Opt. entry????
regards,
indranilAs of my knowledge, It is not Possible.
Any way in the same trxn code OMBW Check the commitment Item Once for 541 Mov type.
Regards,
Ashok
Edited by: Ashok Kumar Telikula on Aug 29, 2008 2:50 PM -
Storage Location field mandatory for Movement Type 103
Hi , We are using movement type 103 and 105 to receive material.
Here we want to make storage location mandatory for movement type 103.
How can we do that.
Regards
SHREYThx for all yr replies ....
I do agree with yr statements ....
103 doesn't update inventory at storage location level therefore it doesn't make sense to have storage location at the time of 103.
But at our end , we are using 103 for MIGO data entry by store user and 105 for MIGO approval .Store users are the right person who are enter correct storage location to which material should go.Therefore looking for a way thru which store user can enter storage lcoation at the time of 103 only.
Since approvers or purchaser are not very sure about the correct storage lcoation to which material should move therefore storage location at PO level or 105 level will not help me.
Any work around ??
Regards
Shreyh -
Need table name for Output Types and Account Assignment Types
Hi
pl let me know the table name for
1. Account Assignment Type
2. Output Types (All)
I need to download some company code specific data for both
Pl confirm
Warm Regards
VikcyHi Thanks for reply
You mean to say that Account Assignment Types = Account Assignment Category ????
Secondly In Table NAST, i can not see field "Output Type"
Pl confirm once which field give me company code specific "Output Type" data
Regards
Vicky -
Variable values updation in table TVARV- for SCMA - very urgent..
Hi all,
Can anyone pass on the code or logic for udating the values of variables like
SAP_SCMA_FISC_YEAR
SAP_SCMA_PERIOD
or the variables I define like
Current fiscal year
Current period
The program should update the values for above variables based on system date, by the period end dates maintained in T009B table
Your help in this regard is highly appreciated
Thanks in advance
KumarHere you go !!
<b>FM "UPDATE_TECHN_PERIODEN_ERWEIT"</b>
<b>FYI</b>
see the source code of FM "MCP_TECH_PERIODEN_GEN"
call function 'UPDATE_TECHN_PERIODEN_ERWEIT' "IN UPDATE TASK
tables
uw_t009b = mt_t009b
exceptions
others = 0.
<b>Pl... award the points.</b>
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise" -
Hi,
Can anybody the table name in which movement types are stored.
Regards,
PrabuHi,
Movement types are stored in Table T156 & field name BWART.
Thanks,
AMIT
Maybe you are looking for
-
I am so sick of Verizon ripping me off and when I call the agents they are so rude to me.
I need help. I know you say, it sounds like it, but I can't get the help from tech support, the agents that answer the phone or the supervisors. My MINIFIED #G has not worked for over a year. I finally realized that I could put it on suspend which
-
Popup Message "You are about to Leave the Page. Proceed?"
Classic Scenario; R/3 46C; SRM 5.0 Hello everyone, I have been seeing this popup in the shopping cart menu every time I click somewhere - "You are about to leave the page. Proceed?" I am not sure where this is coming from... Can any give me a sugges
-
Matching component versions in PI to note requirements
Weu2019re being asked to put in a patch to our PI 7.1 SP07 systems for the Adapter framework and the Messaging system. I donu2019t know how to exactly read the version information I get from the NWA system info readout. I give this from the component
-
How do i install canon lbp 2900 printer
how do i install canon lbp 2900 printer
-
writing in for a friend....has an iMac G3 400MHz OS 10.2. bought the computer used, came with no cds, books or anything. downloaded yahoo messenger but can't get it to run. error message comes up "there is no volume with a system folder that supports