Need for Data Transfer process

Hello Friends
While loading data from ODS to InfoCube, do I really need to create a data transfer process or is there a way that the data loaded into ODS can be subsequently loaded into the cube after undergoing the transformation. If yes, please let me know how we can do that.
Thanks and Regards
Rishi

Hi,
Refer.
DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fb8ed8481e1a61e10000000a422035/frameset.htm
Thanks,
JituK

Similar Messages

Can TIME MACHINE turn on external HD only as needed for data transfer?

Can the TIME MACHINE control turning an external HD on only when backing up instead of leaving the HD running full time? I have a LaCie 500 gig usb HD and currently unmount it and turn off the drive each evening and remount it the next day. Is there any harm in this? Also am I foolish to worry about leaving the drive running perpetually?

The problem is that if your LaCie is a Porsche 500 GB USB drive of the most recent generation, il will NOT sleep, whatever the settings in the Energy Saver Pref Pane.
LaCie Tech confirmed me just yesterday that their most recent production of Porsche drives had a new controller chip that allowed faster transfers and had lower seek time than the previous generation, but lacked the possibility of responding to the sleep command of the computer.
A friend of mine has a LaCie Porsche 500GB USB drive that is a mere 4 months old and that indeed goes to sleep when the computer does, or when he shuts it down, or when he merely ejects the drive. The Porsche that I bought last week doesn't. If it's ON, it spins! The only way to stop it from spinning is with the power button in the rear of the case.
I really wonder why it has to be so.
BimBam

Transporting of Data Transfer Processes fails

Hi to you all!
Ive a problem when transporting DTPs
Always the import of a DTP fails in the after-import method RS_DTPA_AFTER_IMPORT with the same error message.
At the step Post Processing/Checking the Activation for Data Transfer Process <name of DTP> the following error occurs:

PSA table name was blank
**** Error from PSA ****
Error when activating Data Transfer Process

So I built a test case with a simple DTP.
First I successfully transported a simple InfoObject as the source of the DTP.
Then I successfully transported a simple DataStore-Object as the target of the DTP.
Next I successfully transported the transformation of the DTP.
The transport of a DTP still fails with the error message mentioned above.
Ive no idea what the error message what to tell me
Any suggestions?
Thanks
Kai
PS: I' currently working SP09...

Steps you followed seems to be correct
You may wish to check OSS Note 1020231 - 70SP13: UNCAUGHT_EXCEPTION in after import
Hope it Helps
Chetan
@CP..

Activation of Objects with Type Data Transfer Process

Hi Experts,
I am stuck in a problem of activation of DTP. I loaded the data from the Datasource to PSA and there are about 200,000 reocrds.
Now I wanted to take this load to DSO NEW table ..I have created a DTP and when I try to activate the DTP I get this Error
Activation of Objects with Type Data Transfer Process
    Internal Activation (Data Transfer Process )
         Post Processing/Checking the Activation for Data Transfer Process DTP_49Z7OSAHFAR9O8335ED6
              Error when activating Data Transfer Process DTP_49Z7OSAHFAR9O8335ED67X11C.
I tried to activate the Data source but it still didnt help. Looked in SDN for some related stuff but most of them are talking about going for SP 11 ..we are already on
*SAP_BW     700     SAPKW70014     *
Your suggestion will be appreciated with maximum points
Thanks

Hello Experts,
Could you'll please help me out with this ...I
I deleted the DTP and created back again
logged out of BW and logged back again
Infact I found a SAP note 1086877 and i applied it ..but it still didint help
Whie loading the Master Data from PSA to DTP ..it worked fine.
While Loading the transactrion data I went to Tcode RSBATCH and in the drop down I selected the DTP activation and gave a 3 Back ground processes....Ever since that it started giving me problem
Your help will be appreciated...my data loads are stalled ..i mean I cant move forward.
Thanks

Need to build communication redundancy using serial RS-232 for Data Transfer b/w Host and RT irrespective of TCP/IP Data Transfer

Hi - I would like to build the logic in which it should accomodate the communication redundancy using serial RS-232 for Data Transfer b/w Host and RT irrespective of TCP/IP Data Transfer.
I want to do data transfer b/w host and RT through RS232 VISA portal whenever TCP/IP ethernet cable has been unplugged from the controller continuosly , it should keep on checking for TCP/IP link re-establishing also , when ever the tcp/ip link established again that time the communication should be using in that link only. This is accomplished by deploying the RT vi as execuatbale file. I made some logic regards to the above said logic , bur it was not working as much I expected.
I request you to go through the attached two VI's and let me know , what I did wrong in that,
Please do the needful.
Attachments:
TCP_Serial_Host.vi ‏33 KB
TCP_Serial_RT.vi ‏41 KB

even i am new to this topic and i am trying to get familiar with these protocols
refer to tcp server/client examples in labview examples

Problems when creating data transfer process for 0EC_CPLAN (Compensation )

Hi experts,
I have the infoobject 0EC_CPLAN (Compensation Plan) Active in my BW sistem.
I tri to create data transfer process for text and atributtes for it, but when i do this i get a "Target 0EC_CPLAN (Type IOBJA) is not active" error message.
When i double-click on the texts or attributes i recive an "Administration function is not possible for this InfoObject" information message and i can not active or edit it.
What could this be? I am breaking my brain.
Thank you all!

Debugging i have seen this:
15 CALL FUNCTION 'RSD_IOBJ_GET'
16 EXPORTING
17 i_iobjnm = l_iobjnm
18 i_objvers = rs_c_objvers-active
19 i_bypass_buffer = rs_c_false
20 IMPORTING
21 e_s_vcha = l_s_vcha
22 EXCEPTIONS
23 iobj_not_found = 1
24 illegal_input = 2
25 bct_comp_invalid = 3
26 OTHERS = 4.
27 IF sy-subrc <> 0 OR l_s_vcha-infoarea IS INITIAL.
28 MESSAGE i025(rsawbn).
l_s_vcha-infoarea is Initial.
Dues this mean that the object has no-infoarea??? In infoprovider i is under "enterprise compensation management" Does it give you a clue?
Thanks!

Is there any documentation for filter routine in Data Transfer Process?

I am trying to create a filter routine in the Data Transfer Process to select different billing types depending on what date the Data Transfer Process is running....
I have searched through SDN and found some examples, but some formal documentation would help.
Is there any documention on filtering in a Data Transfer Process using a routine?
I am in 7.0

data: l_dow TYPE I,
      L_S_RANGE TYPE rssdlrange.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'F2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'G2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'L2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCDD'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCDI'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCR1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCR2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZDR1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZEDI'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZMD'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZRE'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZRE1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZRED'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZSMP'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZUSD'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZUSI'.
APPEND L_S_RANGE TO l_t_range.
CALL FUNCTION 'DATE_COMPUTE_DAY'
EXPORTING
    date = sy-datum
IMPORTING
    day = L_DOW.
IF l_Dow EQ 5.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'S1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'S2'.
APPEND L_S_RANGE TO l_t_range.
ENDIF.

Crash in data transfer process, exception cx_rs_step_failed_callstack

Hi,
I am having problems with a data transfer process, i am getting the message:
Extraction datasource Z_WMS_VRM
   Prepare for extraction
   Exceptions in Substep: Extraction Completed
   Processing terminated
When I click the button behind "Exceptions in Substep" it jumps to a line with
CALL METHOD cl_rsbm_log_step=>raise_step_failed_callstack
in method IF_RSBK_CMD_X~GET_DATAPACKAGE.
When I look in the PSA(13 records) it all looks ok, no weird values. De infopackage runs ok and fills the PSA. Screenshot of PSA contents: http://i44.tinypic.com/sesqw2.jpg
The datasource is an external DS filled by powerexchange 4.
The system's current support pack is 18.
Edited by: Thijs de Jong on Jun 23, 2009 12:00 PM
Edited by: Thijs de Jong on Jun 23, 2009 12:11 PM

Hello Thijs,
The same issue happened to me this week. This can happen for several reasons:
- Some parts of the loading line is not active, resp. structures were changed and need to be activated again.
- There is no more tablespace in the DB.
- There is a deadlock when reading a table (maybe the table is too big...)
Hope this helps.
Cheers,
Stephan

Issues in Data Transfer Process

Hello All,
After creating transformation from Infosource to InfoCube, now i am trying to data transfer process.
In DTP Type it displays "DTP for direct process", but i need DTP type as Standard(Can be scheduled).
Its giving me an error as "Source does not support direct access"
Could any one help me to solve this error.
Thanks in advance
Regards,
Nithin

Hi,
You can only use the type DTP for Direct Access as the target of the data transfer process for a VirtualProvider.
Check the below links
http://help.sap.com/saphelp_nw04s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/42/fb8ed8481e1a61e10000000a422035/frameset.htm
Regards
KP
Edited by: prashanthk on Jan 19, 2011 5:15 PM

JPA - Best Practice For Data Transfer?

I've been considering an alternative method for data transfer between applications, by using Serialized or Encoded to File JPA Entities. (either Binary or XML)
I know this procedure may have several draw backs as compared to traditional exported SQL queries or data manipulation statements, however, I want to know if anyone has considered or used this process for data transfer?
The process would be to
- query the database and load the JPA Entities
- Serialize or Encode them to file
- zip up the entire folder with the JPA entities
- transfer the data to destination machine
- extract the data to a temp directory
- reload the JPA entities by de-serializing and persisting them to the database
The reason I'm considering this process, is basically because I have a desktop application (manages member records, names, dates, contributions, etc) used by different organisations in different locations (which are not related except by purpose ie clubs or churches) and would like to have a simple way of transporting all data associated with a single profile (information about a member of the organisation) from one location to another in a simple way, ie users interact only with the application without the need for any database management tool or such.
I'm also considering this because it is not easy to generate an SQL Script file without using a dedicated Database Management Tool, which I do not want the application users to have to learn how to use.
I would appreciate ANY suggestions and probable alternative solutions for this problem. FYI: I'm using a Java DB database.
ICE

jschell wrote:
In summary you are moving data from one database to another. True
You only discussed flow one way. Well the process is meant to be bi-directional. Basically what I envision would to have something like:
- the user goes to File -> Export Profile...
- then selects one or more profiles to export
- the export process completes and the zip archive is created and transfered (copied, mailed, etc) to the destination location
then on the destination pc
- the user goes to File -> Import Profile
- selects the profile package
- the app extracts, processes and imports the data (JPA serialized for example)
Flow both ways is significantly more complicated in general.Well if well done it shouldn't be
And what does this have to do with users creating anything?Well as shown above the user would be generating the Zip Archive (assuming that is the final format)
Does this make the problem clearer?
ICE

Data Transfer Process filter: how to view the filter values?

Hi,
does anyone know how to view (and download) the values of a filter of data transfer processes?
I want to compare the filtervalues of data transfer processes from productive system with development system. Normally the DTP's are created in a development system and transported with TMS to quality and productive systems. In the productive system there is often the need to slightly change the values in the filter, and to do this directly in the productive system without transport.
If the same DTP is used and changed by another project after a while, it will overwrite the changes from productive maintenance.
By comparing the filter values one could evaluate the changes.
For info packages there is the same need. Here you can use table RSLDPSEL. Is there someting like that for DTP?
thanks for any help
Jean

Hi,
the difference you have in the infopack and DTP is
you can have any number of infopackages between the source and PSA but you can have only one DTP between the PSA and datatarget.
so there is no othere way than changing the filter values in the existing DTP.
just chk the filter option and choose the required chars for ur load and activate the DTP.
Ramesh

Errors druing Data Transfer process

Hello!
I go through the SAP BW example and have the following error by generating Data Transfer process.
I have corrected the errors (from "EURO" to "EUR") in CSV-files, but I get still the errors:
No SID found for value 'EURO ' of characteristic 0CURRENCY
No SID found for value 'U1 ' of characteristic 0UNIT
I have recreated the flat files/.csv-files, deleted and created the info cube, but the error still occurs.
What are the steps to fix the error?
How can I know which data source contains the error?
What are the possible values for 0CURRENCY and 0UNIT?
Can some one give some recommendation?
Thank you very much!
rergards
Thom

Hello,
You need to delete the data from PSA after an Unsuccessful load, if you want to load it again after correcting data in the source (Flat file in ur case). Right click ur datasource->Manage. Select the request which failed and hit the delete button (trash) at bottom. Now try loading it again.
To get all possible values of currencies and units defined in your system. check contents of following tables:
TCURC - Currency Codes (field -WAERS)
T006 - Units of Measurement (field - MSEHI)
Thanks

Errors in data transfer process

Hi,
i'm getting "Errors in data transfer process" message when i try to run conntrans. when i see the detials error log in trouble shooting ( in client console), i get this following message in detials ( see the bold letters). can some one help me. i have check all the connections between mobile and CRM server. will reward points!!!
2324 96c ! Entering 'PullMessages' for queue 'CRM_SITE_000000000000274' / limit 20 messages
2324 96c Fri Aug 24 20:28:22 2007 E
NewTransferService - _TransferPullMessages : DotNet Stub.TransferPullMessages call failed with fffffffa:(null)
2324 96c E
_TransferPullMessages failed with fffffffa
2324 96c Fri Aug 24 20:28:23 2007 E
regards
Kamalesh K.V

Hi,
We have installed MSA 4.0 (SP12 ). we have also checked QMT config in Mobile sales bin folder. The test connection is sucessfull.( see the below message). we stil have problems in Data transfer when we run connstrans. Please help .
" NewQmtCnfg Version 2.0 for Windows 2000 - revision 4003
Assume running on Client
1. Try to access Communication Station 'MTV01sdCR02', please wait...
... OK
 Try QmtServer component initialize check, please wait...
...OK: QmtServer initialize call returns successfully
2. Try to access CRM Server (Destination '<DEFAULT>'), please wait...
...OK: CRM Server call returns successfully
regards
Kamalesh KV

I need a data transfer from intact hard drive of older macbook that won't boot. Can Apple provide this service even though my one to one membership has expired?

I need a data transfer from a 2005 Macbook to my new one (2010). I damaged the old laptop and although it wouldn't turn on, when I brought it to the Apple Store they ascertained that the hard drive was still intact. They said I needed to purchase a one to one membership to get a data transfer, which I did, but somehow forgot about it and now it's expired. Is there any way I can still get the data from the old hard drive transferred to my new macbook? Can Apple provide this service even though my one to one membership has expired?

Go to OWC where you can purchase a suitable enclosure for the drive. You will need an enclosure for a SATA notebook drive. This is assuming the old computer is a MacBook and not an iBook. I make this observation because the first MacBook was released in 2006, not in 2005. If yours is a 2005 model then it's an iBook and uses an ATA interface.
Install the old drive in the enclosure, connect to your new computer. You can then transfer your data.

What is the "Data Transfer Process" in the BI7.0, and how does it work?

Hi, experts !
I'm fresh on BI7.0.
What is the "Data Transfer Process" in the BI7.0, and how does it work?
And what is it used for ?
Could anyone help me? Plz send me some doc.
[email protected]
Thank u !

HI,
Refer this blog
/people/community.user/blog/2007/06/22/sap-netweaver-70-bi-data-transfer-process-dtp-blog-series
Also refer
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
Thanks

Need for Data Transfer process

Similar Messages

Maybe you are looking for