Need Guidence on following Dimension Issue

Hello everyone,
I want a professional guidence on the following details. Because i have learnt how to use OWB but dont know what are the rules to create a dimension in a profesional manner.
Please check my Dimension creation and advice me.
* Customer Dimension
* Customer Hierarchy
* Customer Personal Infromation Level
- cust_pi_id
- name
- age
- gender etc
* Costumer Contact Information Level
- cust_con_id
- res_no
- mob_no
* Customer Address Level
- cust_add_id
- street_no
- lane_no etc
* Customer Location Level
- cust_loc_id
- city
- country etc
* Customer Level
- cust_id
- total_customer
I want to confirm that am i making the dimension and its levels in the right ways?
Is it the professional way?
Have i made right levels?
Is the arrangement of the levels are right?
Now please tell me how to fill IDs of all levels. Should i use one sequence for all levels or seperate sequences for every level.
And if i would have other hierarchies and its levels too then what would have been the right way to assign sequences in all levels in all the hierarchies.
Waiting for reply.
Take care
Regards
Mustafa Ali Qizilbash

Hi Mustafa,
I think the best source for professional dimension advice is Ralph Kimball. Just google on this and on his site and in his books you will find a wealth of information on how to create these dimensions.
I'm not sure what the intent of the dim is, but the levels seem to be in a "strange" order. I'd expect:
Total
Location
Customer
Address
With the levels holding the describing attributes for each of these levels (so all customer stuff including contact info on customer). Now there are reasons to stick this in address for example. It all depends on cardinality of the information...
Jean-Pierre

Similar Messages

  • Driver files needed for the following Sony dvd/cd rom drive: "dvd-rom ddu 1615". windows xp

    Driver files needed for the following Sony dvd/cd rom drive:  "dvd-rom  ddu 1615". 
    The dvd-rom drive will not read any type of dvd or cd.
    desktop computer:  Dell Dimension E310 , windows xp, service pack 3.
    This Sony dvd rom was installed (by someone else) and replaced the dvd rom that initially came with the Dell E310.  
    Where can I find driver files for this dvd rom?
    Thanks,
    Denise

    Hello Denise,
    Welcome to the Sony Community.
    All of the Sony internal optical drives are plug & play with Windows so no drivers are required for detection in your PC. If you are having issues getting your drive detected then please try the following:
    • Ensure the Sony drive is set as a secondary master by itself. If you have another disc burner or a zip drive on the same IDE cable, please separate them.
    • Ensure you have the latest Service pack for your Windows operating system and any other updates for your system installed.
    service, storage support email
    • Please remove your secondary IDE channel from the Device Manager.
    If the issue is still not resolved, service may be required. You may contact the Sony Storage support team by e-mail at: [email protected] for further information.
    Thank you for your post.

  • Hello  I don't know who to complain to as you do not appear to have a complaints department, despite searching the web, I trust you can pass this to relevant department for action, as I'm very angry over my recent repair.  Following my issue relating to a

    Hello
    I don't know who to complain to as you do not appear to have a complaints department, despite searching the web, I trust you can pass this to relevant department for action, as I'm very angry over my recent repair.
    Following my issue relating to a blank screen 2 weeks ago, your advisor arranged for my iMac to collected by Amsys, for repair and return, this was done and it was returned to me last Tuesday, onWednesday I set up my iMac again and instantly realised I had problems, much worse than before. I called Amsys to inform them of the issue of the computer being very very slow and unable to open iPhoto and pages, and document listing would not show up, plus I had no sound on the mac.They informed me that they had only replaced the video card and what they had done would have not affected the computers performance. He suggested I reinstall OSX again which I did, but this made no difference to the programs, so I called you.
    Your technician on the phone was very good as they have always been, and made an appointment for me to go into the Milton Keynes Apple store the next day at 1 pm, which I did.
    The gentleman on the Genius Bar was very good and was able to run tests on the iMac in my presence, and diagnosed immediately an issue with the sound problem, and advised me that this could not be fixed while I wait and I would need to leave it for repair. I made him aware of the previous repair, and he was able to see via your system, the list of logged issues I have had with this since purchasing in September 2012. I'm sure you can see from the way you record all calls and issues the problems I have had.
    Today I called to ask if my iMac would soon be ready for collection, I was told the repairs had been completed and it was being tested. However to my dismay, I learned of another serious issue relating to the repair carried out by Amsys. I was informed that 6 screws were missing from the the iMac internally, which caused me much distress and concern, they also told me I had to wait even longer as the screws had to be ordered and installed on arrival before I could collect it.
    My issues here are: I trusted the Amsys repairer as it was arranged and recommend by you, it is very evident they are not competent to repair, as they have caused more problems with my iMac on its return, despite enclosing a checklist, fully ticked showing everything working well, it clearly wasn't ! Plus the issue of missing parts (screws) during the repair, I have already expressed my disgust with Amsys, by email and had a response, within the hour, apologising and told me they were looking into this.
    This where I stand on this, I have not had my iMac for  almost two weeks and I do not know when I will get it back. I'm also very worried about what other damage has been caused by Amsys and the quality of my iMac now. I want to know what you, Apple is going to do about this ? I have already been very inconvenienced by this and until now I have been a very loyal apple customer with 2 iPads, and 4 iPhones in our household, not to mention the iMac.
    I feel I have been very let down by this experience, on my iMac, which cost a lot of money, I have also lost a lot of money with lost work and unable to carry out my business without it, and I will be seeking compensation.
    I trust you will take this complaint seriously and pass it to the relevant department for action.
    Yours sincerely
    Des Withey 
    Sent from my iPad
    On 26 Feb 2014, at 11:44, Apple Support <[email protected]> wrote:
    Thanks for contacting us.
    Thanks for contacting Apple Support. If you need more help later, you can open the case below or start a new support request online.
    Case ID:
    Open this case
    Sincerely,
    Apple Support
    Get help online
    Visit Apple Support to learn more about your product, download software updates, and much more.
    Join the conversation
    Find and share solutions with Apple users around the world.
    TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM, Cupertino, CA 95014.
    All Rights Reserved / Privacy Policy / Apple Support / Give us feedback
    On behalf of Apple Distribution International

    Call Apple Customer Relations - 1-800-275-2273.  Ask politely & firmly that you want to be transferred to Customer Relations.  Tell them exactly what you stated in your post.
    GOOD LUCK!
    These are user-to-user forums where everyday folk (volunteers) post questions and offer answers (technical support) to each other.  

  • Follow-up  issue  Interaction Center WebClient

    Hi Guys,
    Can someone help? this is about icwc follow-up issue.
    1. I create a service order and save.
    2. then I create a an interaction record and  save.
    3. I can observe in the service order the relationship "Role:Interaction, DOcument Type: CRM Bus. Activity". But not the
    relationship "Follow up document".
    I have a "Business Transaction Profile" for interaction center where the Activity is the main and service order is dependent
    business transactions. Because, not all the customer when make a call want to create a service order, some only want to
    register a feedback or make an appointment.
    However, In my activity, I can observe in the Activity Clipboard my service order, but I need the SAP assigned the
    relationship "Follow-up" for assign an action for close the follow-up document when close my service order.
    What is wrong....? can someone help...

    Hi Lyda,
    Based on your remark about confirming the account first, I assume you are working with IC 4.0 or 5.0.
    The service order is created as a dependent business transaction of the interaction record. The interaction record is automatically created when you confirm the account.
    The relationship type in document flow is INTA.
    It's true that you can only create activity types as real follow-ups of an interaction record (using the follow-up view).
    However, technically it should be possible to also create other business object types as follow-up of the interaction record. You might need to enhance the transaction type drop-down listbox in the follow-up view. You also need to make sure that your interaction record is error-free.
    As of CRM2006s it is possible in standard to create any business object type as follow-up of an interaction record.
    Regards
    Gert

  • Please clarify the following license issue

    Hello
    Please clarify the following license issue
    Oracle 10g se license requirement while using a power 6 P520 machine with 2-core 4.2 GHz processor card,4 memory DIMM slots. Are we entitled for paying for one oracle 10g SE license?
    many thanks in advance

    When you read through that thread, did you see where I linked to and quoted the licensing definitions
    Processor: shall be defined as all processors where the Oracle programs are installed and/or running. Programs licensed on a processor basis may be accessed by your internal users (including agents and contractors) and by your third party users. For the purpose of counting the number of processors which require licensing for a Sun UltraSPARC T1 processor with 4, 6 or 8 cores at 1.0 gigahertz or 8 cores at 1.2 gigahertz for only those servers specified on the Sun Server Table which can be accessed at http://oracle.com/contracts , “n” cores shall be determined by multiplying the total number of cores by a factor of .25. For the purposes of counting the number of processors which require licensing for AMD and Intel multicore chips, “n” cores shall be determined by multiplying the total number of cores by a factor of .50. For the purposes of counting the number of processors which require licensing for all hardware platforms not otherwise specified in this section, a multicore chip with "n" cores shall be determined by multiplying "n" cores by a factor of .75. All cores on all multicore chips for each licensed program for each factor listed below are to be aggregated before multiplying by the appropriate factor and all fractions of a number are to be rounded up to the next whole number. When licensing Oracle programs with Standard Edition One or Standard Edition in the product name, a processor is counted equivalent to a socket.
    It appears that you fall under the "not otherwise specified" category because you're not dealing with an UltraSPARC T1 (multiplier 0.25) or an AMD/ Intel chip (multiplier 0.5) so your multiplier would be 0.75.
    0.75 * 2 cores = 1.5 processors which would have to be rounded up to 2 processors. If you had 4 total cores, you would only need a 3 processor license.
    Justin

  • TEM - Follow up issue

    Team,
    Events/Courses have been followed-up but show in PV15 as need to be followed up.  Not only is this incorrect, but it makes it more difficult to find the event that really does need to be followed up.
    Is there some kind of a setting to be done to avoid this? Has anyone had a similar issue.
    Pls. suggest.
    Thx
    SKR

    Hi Vinay & Vipul..thanks for the response...
    i know of IT 1026, the problem is that it still show up on the selection screen of (PV15) all the events, followed-up & that needs to be followed up. 
    There  are say 700 items on the selection list to be followed-up, most of which are followed-up.  If i want to follow up on an event I must scroll down through 700 items. 
    Can't we get the selection list filtered for only those events that are NOT followed-up?
    Thanks
    SKR

  • Need to assign follow up activities to Service Quotations

    Hi All,
    can any one give me soluton on
    Need to assign follow up activities to Service Quotations (Create Service Quotation type "ZAV"...transaction code VA21. Need quotes to print out 90 days before service is due again in the following year.
    Thanks in advance.

    Have you already customized Copy Control for your Service Order? If you want to add other transaction types the setting is necessary.
    The customizing path is shown as below.
    SPRO
    -> CRM
      -> Transactions
        -> Basic Settings
          -> Copying Control for Business Transactions
            -> Define Copying Control for Transaction Types
    Regards,
    Web

  • Error while adding landed cost G/L account 5207010003      needs DR assignment for dimension 1;  fill in DR-related fields

    Error while adding landed cost G/L account 5207010003      needs DR assignment for dimension 1;  fill in DR-related fields

    Hi Rajesh
    Go to System Initilization =>  General Settings => Cost Accounting => Check the Dimension1 has Block Posting.
    Relase the Block and add the Document it will add.
    With Regards
    Balaji

  • Need help in Address inconsistency Issue.

    Hi Folks,
    Need your help in this Issue.
    We are getting an Error ---- "Person-address" data doesn't exist while correcting the Address inconsistency through transaction BP in SAP SRM 7.02.
    Kindly suggest any SAP notes on this specific issue.
    Regards,
    SRM User.

    Hello Keith,
             Yes, I have 2 structures in the Query, with Posting periods structure is in the rows restricted by periods and Key fig structure.I did the way you said, but it is not working.
    Regards,
    PNK

  • Is there any Specific naming standards needs to be followed ?

    Hi ,
    Is there any Specific naming standards needs to be followed while in the PL/SQL Programming.
    Please help me out , If any one have any documentation for the same.
    Please mail me @ [email protected]
    Regards
    raja K

    Hold it right there, Mister! Are you planning on another endless "please mail me too"-thread, hah? Wasn't PL/SQL Coding Standards bad enough?
    C.

  • Hi, i need help, okay..my issues is that since the lastest update for the ipod touch, my music lihow can i get the itunes main music playlist to appear the same on my ipod touch?

    Hi, i need help, okay..my issue is that since the lastest update for the ipod touch, my music list is all over the place....my question is how can i get the itunes main music playlist to appear the same on my ipod touch?

    Hi Lawrence,
    Thanks for your prompt response, however I have first seen it now. I have placed an active SIM card in the iPhone turned it off and on. It now says SIM locked, please write access code. The problem is I don't remember the password. When I connect it to iTunes it tell me that I have to write the password before it can be used with iTunes...... Do you have any good ideas? I see you are from the NYC area.... used to work there back in the early 90´   Those were good days..... What a City

  • Dear apple management,  I have purchased I pad mini e few days ago. I need help as follows:  (1) Camera: i did take a few photos but something has gone wrong. As i press the camera icon, I get a blank dark black screen. What do you think has gone wrong ?

    Dear apple management, apple support communities
    I have purchased I pad mini e few days ago. I need help as follows:
    (1) Camera: i did take a few photos but something has gone wrong. As i press the camera icon, I get a blank dark black screen. What do you think has gone wrong ? HELP URGENTLY REQUIRED.
    (2) How do i sync my pc  with I pad mini?
    (3)i can read on i pad mini  file made in microsoft excel but all numbers are very different from the original document. What is the solutuon?
    Dr Uma S Nayak
    <Personal Information Edited by Host>

    You are talking to fellow users on these forums, not iTunes Support or Apple - I've asked the hosts to remove your phone number from your post.
    For the Camera app, try closing it via the taskbar and see if it works when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar at the bottom of the iPad's screen, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't fix it then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    In terms of syncing, you will need iTunes on your computer - if you haven't already downloaded it then you can do so from here : http://www.apple.com/itunes/download/
    You can conncet the iPad to your computer and select it on the left-hand sidebar of your computer's iTunes (you can enable the sidebar on iTunes 11 on a PC via control-S), and use the tabs on the right-hand side of the iTunes screen to sycn your content to the iPad.
    Syncing music : http://support.apple.com/kb/HT1351
    Syncing apps : http://support.apple.com/kb/PH12315
    If you haven't yet synced your iPad to your computer you may also find this page useful : https://discussions.apple.com/docs/DOC-3141
    For the excel file, what app are you viewing/editing it in ? If the values are different then it may be that the app that you are using doesn't support all the formulas that are being used in the spreadsheet. Apps that 'support' excel documents include Apple's Numbers app, and from third-parties apps such as Documents To Go ('premium' version) and QuickOffice Pro HD.

  • I want to cancel my membership.  I need assistance to address this issue

    I want to cancel my membership.  I need assistance to address this issue.  It seems that they have made a repeating loop of unhelpful links to prevent you from canceling a membership.  Any advice? --Travis

    Moving this discussion to the Adobe Creative Cloud forum.
    Adobe you suck! cancel me please contact our support team directly at Contact Customer Care to cancel your membership.  If you are not being given the option to chat with a member of our support team then please utilize a different web browser.  Which web browser and version are you currently using?

  • HT5654 After updating iCloud application on Vista I am unable to access iTunes, I get the following message: (Need to reinstall application, APSDameon.exe, MSVCR80.dll cannot be found)    I need some help rectifying  this issue because I cannot reinstall

    Hello,
    I have installed the update that was sent on or around January 24th - 26th 2014, after the failure of the apple iTunes update the iCloud update was installed.  Ever since these 2 updates I am unable to open iTunes and I receive the following message: (need to reinstall iTunes application, APSDameon.exe and MISVCR80.dll cannot be found).  I have tried reinstalling iTunes and cannot do so, I really do not want and cannot afford to restore my pc to a previous date because of new data on my PC.  I am requesting assistance from support so that I can rectify this issue, thanks in advance for any assistance you may provide.    

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Help Needed - Image Dimension Issue

    Hi...I'm trying to deliver my first e-book, a photography book via iBook Author.  I can't get it delivered, because it seems that every image MUST be 1024 by 768, for instance, in a limited range of supported dimensions.  Not all of my shots are those dimensions (some have been cropped, for instance, and cannot exactly match the dimensions).  Is there any way around this?  Thanks!

    There are a number of methods to add images to a book and I don't recall them being locked to that size, sorry. What process(es) are you using? Which template?
    Are you talking about images in the book, on pages, or cover art or backgrounds, slideshows, landscape, portrait, cropped, masked, etc, etc?
    Seen this?
    Optimizing performance in your iBooks Author books [ support.apple.com/kb/HT5117 ]
    Working with images
    Use JPG for opaque raster images and PNG for transparent raster images whenever possible.
    Resize, crop, and rotate images to the desired size and rotation before importing them into iBooks Author.
    Use an sRGB color profile in your images to improve size and processing time.
    If you need to use high-resolution images in your book, wait to add them until your book is near completion.
    -=-

Maybe you are looking for