Need help - can't run a report cause value set not found

APP-FND-00738: error while loading value SET
Posted: Apr 12, 2007 11:16 PM Reply
Hi, I'm trying to run a report (in the parameters form) - i'm getting this error:
APP-FND-00738: error loading value set SETUP_DESCR_VSETS.
APP-FND-01564: error ORACLE 1403 in FDFAVS.
Reason: Fail in program FDFAVS with reason ORA-01403: no data found.
Executed SQL instruction from file &ERRFILE.
Can you advice - which tool I can use to determine which value set didn't load.
Maybe logs or log tables???

I didnt get your problem exactly.
Plz mention the steps what you are doing and where the error is coming.
So that we can see..
--Basava.S

Similar Messages

Error while running XL Reporter (Cause: MetaInfo.xml not found!)

Unable to connect to XL Reporter
Error! Server communicawtion failed!
Cause: MetaInfo.xml not found!
(Please contact the administrator to fix the repositor connection)

Hi
check this thread:
[Unable connect to XLR in 2007]
All the best
Agustin.

Need help, can't run a GTX 760 on IPISB-CU (carmel2) :(

I just got a GTX 970 to replace my GTX 760, so I gave the GTX 760 to my brother, who is using HP Pavilion p7-1287c. However, I tried my best but can't get his system going. It froze at the logo screen right after the system turn on, then some "beep" sound can be heard after a while. His motherboard is IPISB-CU (camel2). The PSU isn't the problem; it's a new PSU EVGA Bronze 600W. I tried to look for Bios update, but found only a update from 2012. I already installed it, but no help.
So, Is it impossible to run a EVGA GTX 760 SC ACX 2.0 2GB on a IPISB-CU (camel2)? If you know any way to run it, please tell me. Thanks a lot.
This question was solved.
View Solution.

o0Shadow0o, welcome to the forum.
When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them. Once I have this information, I will try to help you with your problem.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

I need help installing itunes 10.3. Says installation program not found??

I keep tryin to download/install itunes update. When it gets to install, computer says the program i am trying to use to install this does not contain an itune installation. Pick another program that does!!! Im not computer savvey. I dont know what to do at this point

Download the iTunes installer from:
http://www.apple.com/itunes/download/
Save it on your PC before attempting to install it.
Put the full text of any error message in your next post including error numbers.
If you prefer you can paste an image of the error into you post.
Press alt prtscrn while the focus is in the error message, then use the little camera at the top of the forum editor to insert the image. (I hope alt prtscrn works in XP, I can't test it myself).

Performance issue in DB need help with analysing this ADDM report

Hi,
My environment:
Os: RHEL5U3 / 11.1.0.7 64 bit / R12.1.1 64 bit
Issue:
Few days are am facing serious of performance problem in our Production instance. Normally the issue will occur 5 to 10 minutes occasionally per day. At the time of issue we not able to access the EBS application its taking time to load. But backend all the oracle, listener and apps services are up and running. No locks at table and session level. Cpu and memory usage is normal.
We have monitored using "Enterprise Manager" for this issue and we found the wait session present more in Active session tab. At this time EBS application is not able access its loading too time. After some time the in Active session tab the wait session came normal and when we try to access the EBS application its working fine.
We try to find the cause of the issue by running addm report. But am not able to understand what its says. Kindly suggests me
ADDM Report for Task 'TASK_42656'
Analysis Period
AWR snapshot range from 14754 to 14755.
Time period starts at 17-APR-12 11.00.22 AM
Time period ends at 17-APR-12 12.00.33 PM
Analysis Target
Database 'PRD' with DB ID 1789440879.
Database version 11.1.0.7.0.
ADDM performed an analysis of instance PRD, numbered 1 and hosted at
advgrpdb.advgroup.ae.
Activity During the Analysis Period
Total database time was 18674 seconds.
The average number of active sessions was 5.17.
Summary of Findings
Description Active Sessions Recommendations
Percent of Activity
1 Top SQL by DB Time 3.43 | 66.33 5
2 Buffer Busy 2.52 | 48.81 5
3 Buffer Busy 1.39 | 26.81 2
4 Log File Switches .91 | 17.56 1
5 Buffer Busy .56 | 10.87 2
6 Undersized SGA .38 | 7.37 1
7 Commits and Rollbacks .28 | 5.42 1
8 Undo I/O .18 | 3.53 0
9 CPU Usage .13 | 2.57 1
10 Top SQL By I/O .11 | 2.21 1
Findings and Recommendations
Finding 1: Top SQL by DB Time
Impact is 3.43 active sessions, 66.33% of total activity.
SQL statements consuming significant database time were found.
Recommendation 1: SQL Tuning
Estimated benefit is 1.59 active sessions, 30.8% of total activity.
Action
Investigate the SQL statement with SQL_ID "a49xsqhv0h31b" for possible
performance improvements.
Related Object
SQL statement with SQL_ID a49xsqhv0h31b.
SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R.Status_Code,
P.Application_ID, P.Concurrent_Program_ID, P.Concurrent_Program_Name,
R.Enable_Trace, R.Restart, DECODE(R.Increment_Dates, 'Y', 'Y', 'N'),
R.NLS_Compliant, R.OUTPUT_FILE_TYPE, E.Executable_Name,
E.Execution_File_Name, A2.Basepath, DECODE(R.Stale, 'Y', 'C',
P.Execution_Method_Code), P.Print_Flag, P.Execution_Options,
DECODE(P.Srs_Flag, 'Y', 'Y', 'Q', 'Y', 'N'), P.Argument_Method_Code,
R.Print_Style, R.Argument_Input_Method_Code, R.Queue_Method_Code,
R.Responsibility_ID, R.Responsibility_Application_ID, R.Requested_By,
R.Number_Of_Copies, R.Save_Output_Flag, R.Printer, R.Print_Group,
R.Priority, U.User_Name, O.Oracle_Username,
O.Encrypted_Oracle_Password, R.Cd_Id, A.Basepath,
A.Application_Short_Name, TO_CHAR(R.Requested_Start_Date,'YYYY/MM/DD
HH24:MI:SS'), R.Nls_Language, R.Nls_Territory,
R.Nls_Numeric_Characters, DECODE(R.Parent_Request_ID, NULL, 0,
R.Parent_Request_ID), R.Priority_Request_ID, R.Single_Thread_Flag,
R.Has_Sub_Request, R.Is_Sub_Request, R.Req_Information,
R.Description, R.Resubmit_Time, TO_CHAR(R.Resubmit_Interval),
R.Resubmit_Interval_Type_Code, R.Resubmit_Interval_Unit_Code,
TO_CHAR(R.Resubmit_End_Date,'YYYY/MM/DD HH24:MI:SS'),
Decode(E.Execution_File_Name, NULL, 'N', Decode(E.Subroutine_Name,
NULL, Decode(E.Execution_Method_Code, 'I', 'Y', 'J', 'Y', 'N'),
'Y')), R.Argument1, R.Argument2, R.Argument3, R.Argument4,
R.Argument5, R.Argument6, R.Argument7, R.Argument8, R.Argument9,
R.Argument10, R.Argument11, R.Argument12, R.Argument13, R.Argument14,
R.Argument15, R.Argument16, R.Argument17, R.Argument18, R.Argument19,
R.Argument20, R.Argument21, R.Argument22, R.Argument23, R.Argument24,
R.Argument25, X.Argument26, X.Argument27, X.Argument28, X.Argument29,
X.Argument30, X.Argument31, X.Argument32, X.Argument33, X.Argument34,
X.Argument35, X.Argument36, X.Argument37, X.Argument38, X.Argument39,
X.Argument40, X.Argument41, X.Argument42, X.Argument43, X.Argument44,
X.Argument45, X.Argument46, X.Argument47, X.Argument48, X.Argument49,
X.Argument50, X.Argument51, X.Argument52, X.Argument53, X.Argument54,
X.Argument55, X.Argument56, X.Argument57, X.Argument58, X.Argument59,
X.Argument60, X.Argument61, X.Argument62, X.Argument63, X.Argument64,
X.Argument65, X.Argument66, X.Argument67, X.Argument68, X.Argument69,
X.Argument70, X.Argument71, X.Argument72, X.Argument73, X.Argument74,
X.Argument75, X.Argument76, X.Argument77, X.Argument78, X.Argument79,
X.Argument80, X.Argument81, X.Argument82, X.Argument83, X.Argument84,
X.Argument85, X.Argument86, X.Argument87, X.Argument88, X.Argument89,
X.Argument90, X.Argument91, X.Argument92, X.Argument93, X.Argument94,
X.Argument95, X.Argument96, X.Argument97, X.Argument98, X.Argument99,
X.Argument100, R.number_of_arguments, C.CD_Name,
NVL(R.Security_Group_ID, 0), NVL(R.org_id, 0) FROM
fnd_concurrent_requests R, fnd_concurrent_programs P, fnd_application
A, fnd_user U, fnd_oracle_userid O, fnd_conflicts_domain C,
fnd_concurrent_queues Q, fnd_application A2, fnd_executables E,
fnd_conc_request_arguments X WHERE R.Status_code = 'I' And
((R.OPS_INSTANCE is null) or (R.OPS_INSTANCE = -1) or
(R.OPS_INSTANCE =
decode(:dcp_on,1,FND_CONC_GLOBAL.OPS_INST_NUM,R.OPS_INSTANCE))) And
R.Request_ID = X.Request_ID(+) And R.Program_Application_Id =
P.Application_Id(+) And R.Concurrent_Program_Id =
P.Concurrent_Program_Id(+) And R.Program_Application_Id =
A.Application_Id(+) And P.Executable_Application_Id =
E.Application_Id(+) And P.Executable_Id =
E.Executable_Id(+) And P.Executable_Application_Id =
A2.Application_Id(+) And R.Requested_By = U.User_Id(+) And R.Cd_Id
= C.Cd_Id(+) And R.Oracle_Id = O.Oracle_Id(+) And Q.Application_Id =
:q_applid And Q.Concurrent_Queue_Id = :queue_id And (P.Enabled_Flag
is NULL OR P.Enabled_Flag = 'Y') And R.Hold_Flag = 'N' And
R.Requested_Start_Date <= Sysdate And ( R.Enforce_Seriality_Flag =
'N' OR ( C.RunAlone_Flag = P.Run_Alone_Flag And (P.Run_Alone_Flag =
'N' OR Not Exists (Select Null From Fnd_Concurrent_Requests Sr
Where Sr.Status_Code In ('R', 'T') And Sr.Enforce_Seriality_Flag =
'Y' And Sr.CD_id = C.CD_Id)))) And Q.Running_Processes <=
Q.Max_Processes And R.Rowid = :reqname And
((P.Execution_Method_Code != 'S' OR
(R.PROGRAM_APPLICATION_ID,R.CONCURRENT_PROGRAM_ID) IN
((0,98),(0,100),(0,31721),(0,31722),(0,31757))) AND
((R.PROGRAM_APPLICATION_ID,R.CONCURRENT_PROGRAM_ID) NOT IN
((510,40112),(510,40113),(510,41497),(510,41498),(530,41859),(530,418
60),(535,41492),(535,41493),(535,41494)))) FOR UPDATE OF
R.status_code NoWait
Rationale
SQL statement with SQL_ID "a49xsqhv0h31b" was executed 4686 times and
had an average elapsed time of 1.2 seconds.
Rationale
Waiting for event "buffer busy waits" in wait class "Concurrency"
accounted for 85% of the database time spent in processing the SQL
statement with SQL_ID "a49xsqhv0h31b".
Rationale
Waiting for event "log file switch (checkpoint incomplete)" in wait
class "Configuration" accounted for 9% of the database time spent in
processing the SQL statement with SQL_ID "a49xsqhv0h31b".
Recommendation 3: SQL Tuning
Estimated benefit is .56 active sessions, 10.91% of total activity.
Action
Investigate the SQL statement with SQL_ID "5d7957yktf3nn" for possible
performance improvements.
Related Object
SQL statement with SQL_ID 5d7957yktf3nn.
UPDATE ICX_SESSIONS SET TIME_OUT = :B2 WHERE SESSION_ID = :B1
Rationale
SQL statement with SQL_ID "5d7957yktf3nn" was executed 266 times and had
an average elapsed time of 7.6 seconds.
Rationale
Waiting for event "buffer busy waits" in wait class "Concurrency"
accounted for 86% of the database time spent in processing the SQL
statement with SQL_ID "5d7957yktf3nn".
Rationale
Waiting for event "log file switch (checkpoint incomplete)" in wait
class "Configuration" accounted for 7% of the database time spent in
processing the SQL statement with SQL_ID "5d7957yktf3nn".
Finding 2: Buffer Busy
Impact is 2.52 active sessions, 48.81% of total activity.
Read and write contention on database blocks was consuming significant
database time.
Recommendation 1: Application Analysis
Estimated benefit is 1.42 active sessions, 27.44% of total activity.
Action
Trace the cause of object contention due to SELECT statements in the
application using the information provided.
Related Object
Database object with ID 34562.
Rationale
The SELECT statement with SQL_ID "a49xsqhv0h31b" was significantly
affected by "buffer busy" waits.
Related Object
SQL statement with SQL_ID a49xsqhv0h31b.
SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R.Status_Code,
P.Application_ID, P.Concurrent_Program_ID, P.Concurrent_Program_Name,
R.Enable_Trace, R.Restart, DECODE(R.Increment_Dates, 'Y', 'Y', 'N'),
R.NLS_Compliant, R.OUTPUT_FILE_TYPE, E.Executable_Name,
E.Execution_File_Name, A2.Basepath, DECODE(R.Stale, 'Y', 'C',
P.Execution_Method_Code), P.Print_Flag, P.Execution_Options,
DECODE(P.Srs_Flag, 'Y', 'Y', 'Q', 'Y', 'N'), P.Argument_Method_Code,
R.Print_Style, R.Argument_Input_Method_Code, R.Queue_Method_Code,
R.Responsibility_ID, R.Responsibility_Application_ID, R.Requested_By,
R.Number_Of_Copies, R.Save_Output_Flag, R.Printer, R.Print_Group,
R.Priority, U.User_Name, O.Oracle_Username,
O.Encrypted_Oracle_Password, R.Cd_Id, A.Basepath,
A.Application_Short_Name, TO_CHAR(R.Requested_Start_Date,'YYYY/MM/DD
HH24:MI:SS'), R.Nls_Language, R.Nls_Territory,
R.Nls_Numeric_Characters, DECODE(R.Parent_Request_ID, NULL, 0,
R.Parent_Request_ID), R.Priority_Request_ID, R.Single_Thread_Flag,
R.Has_Sub_Request, R.Is_Sub_Request, R.Req_Information,
R.Description, R.Resubmit_Time, TO_CHAR(R.Resubmit_Interval),
R.Resubmit_Interval_Type_Code, R.Resubmit_Interval_Unit_Code,
TO_CHAR(R.Resubmit_End_Date,'YYYY/MM/DD HH24:MI:SS'),
Decode(E.Execution_File_Name, NULL, 'N', Decode(E.Subroutine_Name,
NULL, Decode(E.Execution_Method_Code, 'I', 'Y', 'J', 'Y', 'N'),
'Y')), R.Argument1, R.Argument2, R.Argument3, R.Argument4,
R.Argument5, R.Argument6, R.Argument7, R.Argument8, R.Argument9,
R.Argument10, R.Argument11, R.Argument12, R.Argument13, R.Argument14,
R.Argument15, R.Argument16, R.Argument17, R.Argument18, R.Argument19,
R.Argument20, R.Argument21, R.Argument22, R.Argument23, R.Argument24,
R.Argument25, X.Argument26, X.Argument27, X.Argument28, X.Argument29,
X.Argument30, X.Argument31, X.Argument32, X.Argument33, X.Argument34,
X.Argument35, X.Argument36, X.Argument37, X.Argument38, X.Argument39,
X.Argument40, X.Argument41, X.Argument42, X.Argument43, X.Argument44,
X.Argument45, X.Argument46, X.Argument47, X.Argument48, X.Argument49,
X.Argument50, X.Argument51, X.Argument52, X.Argument53, X.Argument54,
X.Argument55, X.Argument56, X.Argument57, X.Argument58, X.Argument59,
X.Argument60, X.Argument61, X.Argument62, X.Argument63, X.Argument64,
X.Argument65, X.Argument66, X.Argument67, X.Argument68, X.Argument69,
X.Argument70, X.Argument71, X.Argument72, X.Argument73, X.Argument74,
X.Argument75, X.Argument76, X.Argument77, X.Argument78, X.Argument79,
X.Argument80, X.Argument81, X.Argument82, X.Argument83, X.Argument84,
X.Argument85, X.Argument86, X.Argument87, X.Argument88, X.Argument89,
X.Argument90, X.Argument91, X.Argument92, X.Argument93, X.Argument94,
X.Argument95, X.Argument96, X.Argument97, X.Argument98, X.Argument99,
X.Argument100, R.number_of_arguments, C.CD_Name,
NVL(R.Security_Group_ID, 0), NVL(R.org_id, 0) FROM
fnd_concurrent_requests R, fnd_concurrent_programs P, fnd_application
A, fnd_user U, fnd_oracle_userid O, fnd_conflicts_domain C,
fnd_concurrent_queues Q, fnd_application A2, fnd_executables E,
fnd_conc_request_arguments X WHERE R.Status_code = 'I' And
((R.OPS_INSTANCE is null) or (R.OPS_INSTANCE = -1) or
(R.OPS_INSTANCE =
decode(:dcp_on,1,FND_CONC_GLOBAL.OPS_INST_NUM,R.OPS_INSTANCE))) And
R.Request_ID = X.Request_ID(+) And R.Program_Application_Id =
P.Application_Id(+) And R.Concurrent_Program_Id =
P.Concurrent_Program_Id(+) And R.Program_Application_Id =
A.Application_Id(+) And P.Executable_Application_Id =
E.Application_Id(+) And P.Executable_Id =
E.Executable_Id(+) And P.Executable_Application_Id =
A2.Application_Id(+) And R.Requested_By = U.User_Id(+) And R.Cd_Id
= C.Cd_Id(+) And R.Oracle_Id = O.Oracle_Id(+) And Q.Application_Id =
:q_applid And Q.Concurrent_Queue_Id = :queue_id And (P.Enabled_Flag
is NULL OR P.Enabled_Flag = 'Y') And R.Hold_Flag = 'N' And
R.Requested_Start_Date <= Sysdate And ( R.Enforce_Seriality_Flag =
'N' OR ( C.RunAlone_Flag = P.Run_Alone_Flag And (P.Run_Alone_Flag =
'N' OR Not Exists (Select Null From Fnd_Concurrent_Requests Sr
Where Sr.Status_Code In ('R', 'T') And Sr.Enforce_Seriality_Flag =
'Y' And Sr.CD_id = C.CD_Id)))) And Q.Running_Processes <=
Q.Max_Processes And R.Rowid = :reqname And
((P.Execution_Method_Code != 'S' OR
(R.PROGRAM_APPLICATION_ID,R.CONCURRENT_PROGRAM_ID) IN
((0,98),(0,100),(0,31721),(0,31722),(0,31757))) AND
((R.PROGRAM_APPLICATION_ID,R.CONCURRENT_PROGRAM_ID) NOT IN
((510,40112),(510,40113),(510,41497),(510,41498),(530,41859),(530,418
60),(535,41492),(535,41493),(535,41494)))) FOR UPDATE OF
R.status_code NoWait
UPDATE ICX_SESSIONS SET LAST_CONNECT = SYSDATE WHERE SESSION_ID = :B1
Recommendation 1: Schema Changes
Estimated benefit is .03 active sessions, .62% of total activity.
Action
Consider rebuilding the TABLE "APPLSYS.FND_LOGIN_RESP_FORMS" with object
ID 34651 using a higher value for PCTFREE.
Related Object
Database object with ID 34651.
Rationale
The UPDATE statement with SQL_ID "cqc5crhxxt36t" was significantly
affected by "buffer busy" waits.
Related Object
SQL statement with SQL_ID cqc5crhxxt36t.
UPDATE FND_LOGIN_RESP_FORMS FLRF SET END_TIME = SYSDATE WHERE
FLRF.LOGIN_ID = :B2 AND FLRF.LOGIN_RESP_ID = :B1 AND FLRF.END_TIME IS
NULL AND (FLRF.FORM_ID, FLRF.FORM_APPL_ID) = (SELECT F.FORM_ID,
F.APPLICATION_ID FROM FND_FORM F, FND_APPLICATION A WHERE F.FORM_NAME
= :B4 AND F.APPLICATION_ID = A.APPLICATION_ID AND
A.APPLICATION_SHORT_NAME = :B3 )
Symptoms That Led to the Finding:
Wait class "Concurrency" was consuming significant database time.
Impact is 2.53 active sessions, 48.87% of total activity.
Finding 4: Log File Switches
Impact is .91 active sessions, 17.56% of total activity.
Log file switch operations were consuming significant database time while
waiting for checkpoint completion.
This problem can be caused by use of hot backup mode on tablespaces. DML to
tablespaces in hot backup mode causes generation of additional redo.
Recommendation 1: Database Configuration
Estimated benefit is .91 active sessions, 17.56% of total activity.
Action
Verify whether incremental shipping was used for standby databases.
Symptoms That Led to the Finding:
Wait class "Configuration" was consuming significant database time.
Impact is .91 active sessions, 17.63% of total activity.
Finding 5: Buffer Busy
Impact is .56 active sessions, 10.87% of total activity.
A hot data block with concurrent read and write activity was found. The block
belongs to segment "ICX.ICX_SESSIONS" and is block 243489 in file 36.
Recommendation 1: Application Analysis
Estimated benefit is .56 active sessions, 10.87% of total activity.
Action
Investigate application logic to find the cause of high concurrent read
and write activity to the data present in this block.
Related Object
Database block with object number 37562, file number 36 and block
number 243489.
Rationale
The SQL statement with SQL_ID "5d7957yktf3nn" spent significant time on
"buffer busy" waits for the hot block.
Related Object
SQL statement with SQL_ID 5d7957yktf3nn.
UPDATE ICX_SESSIONS SET TIME_OUT = :B2 WHERE SESSION_ID = :B1
Rationale
The SQL statement with SQL_ID "326up1aym56dd" spent significant time on
"buffer busy" waits for the hot block.
Related Object
SQL statement with SQL_ID 326up1aym56dd.
UPDATE ICX_SESSIONS SET LAST_CONNECT = SYSDATE WHERE SESSION_ID = :B1
Recommendation 2: Schema Changes
Estimated benefit is .56 active sessions, 10.87% of total activity.
Action
Consider rebuilding the TABLE "ICX.ICX_SESSIONS" with object ID 37562
using a higher value for PCTFREE.
Related Object
Database object with ID 37562.
Symptoms That Led to the Finding:
Wait class "Concurrency" was consuming significant database time.
Impact is 2.53 active sessions, 48.87% of total activity.
Finding 6: Undersized SGA
Impact is .38 active sessions, 7.37% of total activity.
The SGA was inadequately sized, causing additional I/O or hard parses.
The value of parameter "sga_target" was "4096 M" during the analysis period.
Recommendation 1: Database Configuration
Estimated benefit is .12 active sessions, 2.33% of total activity.
Action
Increase the size of the SGA by setting the parameter "sga_target" to
4608 M.
Symptoms That Led to the Finding:
Wait class "User I/O" was consuming significant database time.
Impact is .7 active sessions, 13.57% of total activity.
Hard parsing of SQL statements was consuming significant database time.
Impact is .13 active sessions, 2.51% of total activity.
Contention for latches related to the shared pool was consuming
significant database time.
Impact is 0 active sessions, .03% of total activity.
Wait class "Concurrency" was consuming significant database time.
Impact is 2.53 active sessions, 48.87% of total activity.
Finding 7: Commits and Rollbacks
Impact is .28 active sessions, 5.42% of total activity.
Waits on event "log file sync" while performing COMMIT and ROLLBACK operations
were consuming significant database time.
Recommendation 1: Host Configuration
Estimated benefit is .28 active sessions, 5.42% of total activity.
Action
Investigate the possibility of improving the performance of I/O to the
online redo log files.
Rationale
The average size of writes to the online redo log files was 163 K and
the average time per write was 68 milliseconds.
Symptoms That Led to the Finding:
Wait class "Commit" was consuming significant database time.
Impact is .28 active sessions, 5.42% of total activity.
Finding 8: Undo I/O
Impact is .18 active sessions, 3.53% of total activity.
Undo I/O was a significant portion (26%) of the total database I/O.
No recommendations are available.
Symptoms That Led to the Finding:
The throughput of the I/O subsystem was significantly lower than
expected.
Impact is .08 active sessions, 1.46% of total activity.
Wait class "User I/O" was consuming significant database time.
Impact is .7 active sessions, 13.57% of total activity.
Finding 9: CPU Usage
Impact is .13 active sessions, 2.57% of total activity.
Time spent on the CPU by the instance was responsible for a substantial part
of database time.
Recommendation 1: SQL Tuning
Estimated benefit is .13 active sessions, 2.57% of total activity.
Finding 10: Top SQL By I/O
Impact is .11 active sessions, 2.21% of total activity.
Individual SQL statements responsible for significant user I/O wait were
found.
Recommendation 1: SQL Tuning
Estimated benefit is .11 active sessions, 2.22% of total activity.
Action
Run SQL Tuning Advisor on the SQL statement with SQL_ID "b3pnc5yctv2z5".
Related Object
SQL statement with SQL_ID b3pnc5yctv2z5.
INSERT INTO ZX_TRANSACTION_LINES_GT( APPLICATION_ID ,ENTITY_CODE
,EVENT_CLASS_CODE ,TRX_ID ,TRX_LEVEL_TYPE ,TRX_LINE_ID ,LINE_CLASS
,LINE_LEVEL_ACTION ,TRX_LINE_TYPE ,TRX_LINE_DATE
,LINE_AMT_INCLUDES_TAX_FLAG ,LINE_AMT ,TRX_LINE_QUANTITY ,UNIT_PRICE
,PRODUCT_ID ,PRODUCT_ORG_ID ,UOM_CODE ,PRODUCT_CODE ,SHIP_TO_PARTY_ID
,SHIP_FROM_PARTY_ID ,BILL_TO_PARTY_ID ,BILL_FROM_PARTY_ID
,SHIP_FROM_PARTY_SITE_ID ,BILL_FROM_PARTY_SITE_ID
,SHIP_TO_LOCATION_ID ,SHIP_FROM_LOCATION_ID ,BILL_TO_LOCATION_ID
,SHIP_THIRD_PTY_ACCT_ID ,SHIP_THIRD_PTY_ACCT_SITE_ID ,HISTORICAL_FLAG
,TRX_LINE_CURRENCY_CODE ,TRX_LINE_CURRENCY_CONV_DATE
,TRX_LINE_CURRENCY_CONV_RATE ,TRX_LINE_CURRENCY_CONV_TYPE
,TRX_LINE_MAU ,TRX_LINE_PRECISION ,HISTORICAL_TAX_CODE_ID
,TRX_BUSINESS_CATEGORY ,PRODUCT_CATEGORY ,PRODUCT_FISC_CLASSIFICATION
,LINE_INTENDED_USE ,PRODUCT_TYPE ,USER_DEFINED_FISC_CLASS
,ASSESSABLE_VALUE ,INPUT_TAX_CLASSIFICATION_CODE ,ACCOUNT_CCID
,BILL_THIRD_PTY_ACCT_ID ,BILL_THIRD_PTY_ACCT_SITE_ID ,TRX_LINE_NUMBER
,TRX_LINE_DESCRIPTION ,PRODUCT_DESCRIPTION ,USER_UPD_DET_FACTORS_FLAG
,DEFAULTING_ATTRIBUTE1 ) SELECT :B4 ,:B3 ,:B2
,PRL.REQUISITION_HEADER_ID ,:B1 ,PRL.REQUISITION_LINE_ID ,'INVOICE'
,NVL(PRL.TAX_ATTRIBUTE_UPDATE_CODE,'UPDATE') ,'ITEM'
,NVL(PRL.NEED_BY_DATE, SYSDATE) ,'N' ,NVL(PRL.AMOUNT,
PRL.UNIT_PRICE*PRL.QUANTITY) ,PRL.QUANTITY ,PRL.UNIT_PRICE
,PRL.ITEM_ID ,(SELECT FSP.INVENTORY_ORGANIZATION_ID FROM
FINANCIALS_SYSTEM_PARAMS_ALL FSP WHERE FSP.ORG_ID=PRL.ORG_ID)
,(SELECT MUM.UOM_CODE FROM MTL_UNITS_OF_MEASURE MUM WHERE
MUM.UNIT_OF_MEASURE=PRL.UNIT_MEAS_LOOKUP_CODE) ,MSIB.SEGMENT1
,PRL.DESTINATION_ORGANIZATION_ID ,PV.PARTY_ID ,PRH.ORG_ID
,PV.PARTY_ID ,PVS.PARTY_SITE_ID ,PVS.PARTY_SITE_ID
,PRL.DELIVER_TO_LOCATION_ID ,(SELECT HZPS.LOCATION_ID FROM
HZ_PARTY_SITES HZPS WHERE HZPS.PARTY_SITE_ID = PVS.PARTY_SITE_ID)
,(SELECT LOCATION_ID FROM HR_ALL_ORGANIZATION_UNITS WHERE
ORGANIZATION_ID=PRH.ORG_ID) ,PRL.VENDOR_ID ,PRL.VENDOR_SITE_ID ,NULL
,NVL(PRL.CURRENCY_CODE, :B9 ) ,NVL2(PRL.CURRENCY_CODE, PRL.RATE_DATE,
SYSDATE) ,NVL2(PRL.CURRENCY_CODE, PRL.RATE, :B8 )
,NVL2(PRL.CURRENCY_CODE, PRL.RATE_TYPE, :B7 )
,FC.MINIMUM_ACCOUNTABLE_UNIT ,NVL(FC.PRECISION, 2) ,NULL
,DECODE(PRL.TAX_ATTRIBUTE_UPDATE_CODE, 'CREATE',
NVL2(PRL.PARENT_REQ_LINE_ID, ZXLDET.TRX_BUSINESS_CATEGORY, NULL),
NULL ) ,DECODE(PRL.TAX_ATTRIBUTE_UPDATE_CODE, 'CREATE',
NVL2(PRL.PARENT_REQ_LINE_ID, ZXLDET.PRODUCT_CATEGORY, NULL), NULL )
,DECODE(PRL.TAX_ATTRIBUTE_UPDATE_CODE, 'CREATE',
NVL2(PRL.PARENT_REQ_LINE_ID, ZXLDET.PRODUCT_FISC_CLASSIFICATION,
NULL), NULL ) ,DECODE(PRL.TAX_ATTRIBUTE_UPDATE_CODE, 'CREATE',
NVL2(PRL.PARENT_REQ_LINE_ID, ZXLDET.LINE_INTENDED_USE, NULL), NULL )
,DECODE(PRL.TAX_ATTRIBUTE_UPDATE_CODE, 'CREATE',
NVL2(PRL.PARENT_REQ_LINE_ID, ZXLDET.PRODUCT_TYPE, NULL), NULL )
,DECODE(PRL.TAX_ATTRIBUTE_UPDATE_CODE, 'CREATE',
NVL2(PRL.PARENT_REQ_LINE_ID, ZXLDET.USER_DEFINED_FISC_CLASS, NULL),
NULL ) ,DECODE(PRL.TAX_ATTRIBUTE_UPDATE_CODE, 'CREATE',
NVL2(PRL.PARENT_REQ_LINE_ID, ZXLDET.ASSESSABLE_VALUE, NULL), NULL )
,DECODE(:B6 , 'REQIMPORT', PRL.TAX_NAME,
DECODE(PRL.TAX_ATTRIBUTE_UPDATE_CODE, 'CREATE',
NVL2(PRL.PARENT_REQ_LINE_ID, ZXLDET.INPUT_TAX_CLASSIFICATION_CODE,
NULL), NULL ) ) ,NVL((SELECT PRD.CODE_COMBINATION_ID FROM
PO_REQ_DISTRIBUTIONS_ALL PRD WHERE PRD.REQUISITION_LINE_ID =
PRL.REQUISITION_LINE_ID AND ROWNUM = 1), MSIB.EXPENSE_ACCOUNT )
,PV.VENDOR_ID ,PVS.VENDOR_SITE_ID ,PRL.LINE_NUM ,PRL.ITEM_DESCRIPTION
,PRL.ITEM_DESCRIPTION ,(SELECT 'Y' FROM DUAL WHERE :B6 = 'REQIMPORT'
AND PRL.TAX_NAME IS NOT NULL) ,PRL.DESTINATION_ORGANIZATION_ID FROM
PO_REQUISITION_HEADERS_ALL PRH, PO_REQUISITION_LINES_ALL PRL,
ZX_LINES_DET_FACTORS ZXLDET, PO_VENDORS PV, PO_VENDOR_SITES_ALL PVS,
MTL_SYSTEM_ITEMS_B MSIB, FND_CURRENCIES FC WHERE
PRH.REQUISITION_HEADER_ID = :B5 AND PRH.REQUISITION_HEADER_ID =
PRL.REQUISITION_HEADER_ID AND ZXLDET.APPLICATION_ID(+) = :B4 AND
ZXLDET.ENTITY_CODE(+) = :B3 AND ZXLDET.EVENT_CLASS_CODE(+) = :B2 AND
ZXLDET.TRX_LEVEL_TYPE(+) = :B1 AND ZXLDET.TRX_LINE_ID(+) =
PRL.PARENT_REQ_LINE_ID AND PV.VENDOR_ID(+) = PRL.VENDOR_ID AND
PVS.VENDOR_SITE_ID(+) = PRL.VENDOR_SITE_ID AND
MSIB.INVENTORY_ITEM_ID(+) = PRL.ITEM_ID AND MSIB.ORGANIZATION_ID(+) =
PRL.ORG_ID AND FC.CURRENCY_CODE(+) = PRL.CURRENCY_CODE AND
NVL(PRL.MODIFIED_BY_AGENT_FLAG, 'N') = 'N' AND NVL(PRL.CANCEL_FLAG,
'N') = 'N' AND NVL(PRL.CLOSED_CODE, 'OPEN') <> 'FINALLY CLOSED' AND
PRL.LINE_LOCATION_ID IS NULL AND PRL.AT_SOURCING_FLAG IS NULL
Rationale
SQL statement with SQL_ID "b3pnc5yctv2z5" was executed 3 times and had
an average elapsed time of 138 seconds.
Rationale
Average time spent in User I/O wait events per execution was 137
seconds.
Symptoms That Led to the Finding:
Wait class "User I/O" was consuming significant database time.
Impact is .7 active sessions, 13.57% of total activity.
Additional Information
Miscellaneous Information
Wait class "Application" was not consuming significant database time.
Wait class "Network" was not consuming significant database time.
Session connect and disconnect calls were not consuming significant database
time.
The database's maintenance windows were active during 100% of the analysis
period.
Regards
Athish

Few days are am facing serious of performance problem in our Production instanceFor production issues, please log a SR.
Was this working before? If yes, any changes been done recently?
Do you have the statistics collected up to date?
Please see these docs.
AutoInvoice Performance Issue When Processing Tax [ID 1059275.1]
R12 : System Hangs When Attempting To Save Blanket Release After Applying Patch 11817843 [ID 1333336.1]
Thanks,
Hussein

Can we run alv reports in background

hi all
can we run alv reports in background

Hi
Yes You can
see this
Many a times there is a requirement to display ALV Grid (not ALV List) in the background Job. I have checked the SDN Forum for the same and it has been mentioned that ALV Grid cannot be displayed in Background, but the list output of ALV is possible. So user wont have the actual Grid interface but the List interface.
There is a workaround to display ALV Grid in Background Job. The only restriction is you cant schedule the job through SM36. You need to execute the transaction of the report program, fill in the selection screen data and hit Execute.
The job would be executed in background. User will be able to see the Job Log and Job Status after executing the program. User doesnt have to go to SM37 to view the job status/log. Once the Job Status is changed to COMPLETED, user can click on DISPLAY SPOOL to view the ALV Grid.
Limitations:
Cant schedulea background job
The session should be active until the background job is completed. If the session is closed, then user wont be able to check the output in ALV Grid. User would be able to check the output through spool or SM37
Advantages:
If the spool width is greater than 255 characters, then the entire width could be seen in the output because the output is directed to an ALV Grid and not to spool
Interface of ALV Grid is available instead of ALV List even though its a background job.
Program wont give the TIME OUT error
Steps Required:
1. Once you execute the program, the following screen would be displayed
2. Click Display Job Status to check the Status of the Background Job
3. Click on Display the Job Log to check the Log
4. Click on Display Job Status to check the Job Status
5. Click on DISPLAY SPOOL to check the spool content once the Job Status is changed to COMPLETED. Output is displayed in ALV Grid
Programs:
1. Two different programs needs to be created
ZPROGRAM_ONE: This is the 1st program, where the selection screen and all the data validations would be done. Error handling for invalid data should be done in this program.
Once the data validation is done, this program would call the 2nd program ZPROGEAM_TWO. Build the logic to display ALV Grid in this program. The logic will only display ALV in foreground and it wont be reflected in the spool.
ZPROGRAM_TWO: This program would fetch all the data and do all the processing. If you want the spool output along with ALV Grid output, then build the logic in this program to display ALV Grid.
*& Report ZPROGRAM_ONE                                                *
REPORT zprogram_one                            .
PRASHANT PATIL
TABLES : mara,
         tsp01.
type-pools:slis.
TYPES : BEGIN OF t_mara,
          matnr   TYPE mara-matnr,
          ersda   TYPE mara-ersda,
          ernam   TYPE mara-ernam,
          laeda   TYPE mara-laeda,
        END OF t_mara.
DATA : i_mara       TYPE STANDARD TABLE OF t_mara,
       wa_mara      TYPE t_mara,
       wa_index     TYPE indx,        " For Index details
       wa_index_key TYPE indx-srtfd VALUE 'PRG_ONE',
       i_jobsteplist     TYPE STANDARD TABLE OF tbtcstep, " For spool number
       wa_params         TYPE pri_params, " To Get Print Parameters
       wa_jobhead        TYPE tbtcjob,     " To know the status of job
       wa_jobsteplist    TYPE tbtcstep,    " To know the spool
       w_jobname         TYPE tbtco-jobname, " Job name for bckgrnd job
       w_jobcount        TYPE tbtco-jobcount, " Unique id for bckgrd job
       w_path            TYPE string,         " Upload path
       w_lsind           TYPE sy-lsind,       " Index
       wa_seltab         TYPE rsparams,
       i_seltab          TYPE STANDARD TABLE OF rsparams,
       wa_index1         TYPE indx,        " For Index details
       wa_index_key1     TYPE indx-srtfd VALUE 'PRG_TWO',
       i_fieldcat        TYPE slis_t_fieldcat_alv,
       wa_fieldcat       LIKE LINE OF i_fieldcat.
        CONSTANTS DECLARATION                                        *
CONSTANTS :
         c_a(1) TYPE c VALUE 'A',
         c_m(1) TYPE c VALUE 'M',
         c_l(1) TYPE c VALUE 'L',
         c_c(1) TYPE c VALUE 'C',
         c_zfdr(4) TYPE c VALUE 'ZFDR',
         c_x(1)    TYPE c VALUE 'X',
         c_locl(4) TYPE c VALUE 'LOCL', " Destination is LOCAL
         c_f(1)    TYPE c VALUE 'F',   " Job Status - Failed
         c_s(1)    TYPE c VALUE 'S',
         c_p(1)    TYPE c VALUE 'P'.
SELECTION SCREEN PARAMETERS
SELECT-OPTIONS : s_matnr FOR mara-matnr.
START-OF-SELECTION.
Before the export, fill the data fields before CLUSTR
wa_index-aedat = sy-datum.
wa_index-usera = sy-uname.
EXPORT s_matnr
       TO DATABASE indx(st) FROM wa_index ID wa_index_key.
To Open the Job for background processing
PERFORM open_job.
To get the print parameters
PERFORM get_print_parameters.
Submit the job in background
PERFORM job_submit.
Close the background job
PERFORM job_close.
This is the output screen with the buttons ********
Create 3 buttons DISPLAY SPOOL, STATUS, JOBLOG
SET PF-STATUS 'ZS001'.
WRITE: / 'The program is submitted in Background'.
WRITE: / 'Press DISPLAY SPOOL to see the spool'.
WRITE: / 'Press STATUS to see the status of the background'.
AT USER-COMMAND.
If user presses the 'BACK' button
IF sy-ucomm = 'BAK'.
    IF wa_jobhead-status = c_f OR
        wa_jobhead-status = c_a.
      LEAVE TO SCREEN 0.
    ENDIF.
ENDIF.
If the user presses the 'DISPLAY SPOOL' Button
IF sy-ucomm = 'DISPLAY'.
    PERFORM display_spool.
ENDIF.
If the user presses the 'JOB STATUS' Button
IF sy-ucomm = 'STATUS'.
    PERFORM display_status.
ENDIF.
If the user presses the 'JOB LOG' Button
IF sy-ucomm = 'JOBLOG'.
    PERFORM display_job_log.
ENDIF.
*&      Form open_job
      text
--> p1        text
<-- p2        text
FORM open_job .
This is to Create a new job which is to be submitted in background to
process sales order/delivery/invoice
Here we would get a unique id ( Jobcount ) which identifies our job
along with the job name which we have assigned to our job
CONCATENATE sy-uname
              sy-datum
              sy-uzeit
                      INTO w_jobname . " Assign unique jobname
CALL FUNCTION 'JOB_OPEN'
   EXPORTING
DELANFREP              = ' '
JOBGROUP               = ' '
    jobname                = w_jobname
SDLSTRTDT              = NO_DATE
SDLSTRTTM              = NO_TIME
JOBCLASS               =
IMPORTING
   jobcount                = w_jobcount
CHANGING
RET                    =
EXCEPTIONS
   cant_create_job        = 1
   invalid_job_data       = 2
   jobname_missing        = 3
   OTHERS                 = 4
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " open_job
*&      Form get_print_parameters
      text
--> p1        text
<-- p2        text
FORM get_print_parameters .
DATA : l_valid TYPE c.
This is to get the Print Parameters for the job which is to be
submitted in background to process sales order/delivery/invoice
CALL FUNCTION 'GET_PRINT_PARAMETERS'
   EXPORTING
ARCHIVE_ID                   = C_CHAR_UNKNOWN
ARCHIVE_INFO                 = C_CHAR_UNKNOWN
ARCHIVE_MODE                 = C_CHAR_UNKNOWN
ARCHIVE_TEXT                 = C_CHAR_UNKNOWN
AR_OBJECT                    = C_CHAR_UNKNOWN
ARCHIVE_REPORT               = C_CHAR_UNKNOWN
AUTHORITY                    = C_CHAR_UNKNOWN
COPIES                       = C_NUM3_UNKNOWN
COVER_PAGE                   = C_CHAR_UNKNOWN
DATA_SET                     = C_CHAR_UNKNOWN
DEPARTMENT                   = C_CHAR_UNKNOWN
      destination                  = c_locl " LOCL
EXPIRATION                   = C_NUM1_UNKNOWN
      immediately                  = space
IN_ARCHIVE_PARAMETERS        = ' '
IN_PARAMETERS                = ' '
LAYOUT                       = C_CHAR_UNKNOWN
LINE_COUNT                   = C_INT_UNKNOWN
LINE_SIZE                    = C_INT_UNKNOWN
LIST_NAME                    = C_CHAR_UNKNOWN
LIST_TEXT                    = C_CHAR_UNKNOWN
MODE                         = ' '
      new_list_id                  = c_x
PROTECT_LIST                 = C_CHAR_UNKNOWN
      no_dialog                    = c_x
RECEIVER                     = C_CHAR_UNKNOWN
RELEASE                      = C_CHAR_UNKNOWN
REPORT                       = C_CHAR_UNKNOWN
SAP_COVER_PAGE               = C_CHAR_UNKNOWN
HOST_COVER_PAGE              = C_CHAR_UNKNOWN
PRIORITY                     = C_NUM1_UNKNOWN
SAP_OBJECT                   = C_CHAR_UNKNOWN
TYPE                         = C_CHAR_UNKNOWN
      user                         = sy-uname
USE_OLD_LAYOUT               = ' '
UC_DISPLAY_MODE              = C_CHAR_UNKNOWN
DRAFT                        = C_CHAR_UNKNOWN
ABAP_LIST                    = ' '
USE_ARCHIVENAME_DEF          = ' '
DEFAULT_SPOOL_SIZE           = C_CHAR_UNKNOWN
PO_FAX_STORE                 = ' '
NO_FRAMES                    = C_CHAR_UNKNOWN
   IMPORTING
OUT_ARCHIVE_PARAMETERS       =
      out_parameters               = wa_params
   valid                        = l_valid
   EXCEPTIONS
     archive_info_not_found       = 1
     invalid_print_params         = 2
     invalid_archive_params       = 3
     OTHERS                       = 4
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " get_print_parameters
*&      Form job_submit
      text
--> p1        text
<-- p2        text
FORM job_submit .
The job which we have created & the unique id ( jobcount ) which we
have got identifies our job. Hence those parameters are passed along
with the name of the background program "ZPROGRAM_TWO"
The job is submitted in background.
CALL FUNCTION 'JOB_SUBMIT'
    EXPORTING
ARCPARAMS                         =
    authcknam                         = sy-uname
COMMANDNAME                       = ' '
OPERATINGSYSTEM                   = ' '
EXTPGM_NAME                       = ' '
EXTPGM_PARAM                      = ' '
EXTPGM_SET_TRACE_ON               = ' '
EXTPGM_STDERR_IN_JOBLOG           = 'X'
EXTPGM_STDOUT_IN_JOBLOG           = 'X'
EXTPGM_SYSTEM                     = ' '
EXTPGM_RFCDEST                    = ' '
EXTPGM_WAIT_FOR_TERMINATION       = 'X'
    jobcount                          = w_jobcount
    jobname                           = w_jobname
LANGUAGE                          = SY-LANGU
    priparams                         = wa_params
    report                            = 'ZPROGRAM_TWO'
VARIANT                           = ' '
IMPORTING
STEP_NUMBER                       =
   EXCEPTIONS
     bad_priparams                     = 1
     bad_xpgflags                      = 2
     invalid_jobdata                   = 3
     jobname_missing                   = 4
     job_notex                         = 5
     job_submit_failed                 = 6
     lock_failed                       = 7
     program_missing                   = 8
     prog_abap_and_extpg_set           = 9
     OTHERS                            = 10
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " job_submit
*&      Form job_close
      text
--> p1        text
<-- p2        text
FORM job_close .
Once the job is submitted in background then the job is closed
CALL FUNCTION 'JOB_CLOSE'
    EXPORTING
AT_OPMODE                         = ' '
AT_OPMODE_PERIODIC                = ' '
CALENDAR_ID                       = ' '
EVENT_ID                          = ' '
EVENT_PARAM                       = ' '
EVENT_PERIODIC                    = ' '
    jobcount                          = w_jobcount
    jobname                           = w_jobname
LASTSTRTDT                        = NO_DATE
LASTSTRTTM                        = NO_TIME
PRDDAYS                           = 0
PRDHOURS                          = 0
PRDMINS                           = 0
PRDMONTHS                         = 0
PRDWEEKS                          = 0
PREDJOB_CHECKSTAT                 = ' '
PRED_JOBCOUNT                     = ' '
PRED_JOBNAME                      = ' '
SDLSTRTDT                         = NO_DATE
SDLSTRTTM                         = NO_TIME
STARTDATE_RESTRICTION             = BTC_PROCESS_ALWAYS
    strtimmed                         = c_x
TARGETSYSTEM                      = ' '
START_ON_WORKDAY_NOT_BEFORE       = SY-DATUM
START_ON_WORKDAY_NR               = 0
WORKDAY_COUNT_DIRECTION           = 0
RECIPIENT_OBJ                     =
TARGETSERVER                      = ' '
DONT_RELEASE                      = ' '
TARGETGROUP                       = ' '
DIRECT_START                      =
IMPORTING
JOB_WAS_RELEASED                  =
CHANGING
RET                               =
   EXCEPTIONS
     cant_start_immediate              = 1
     invalid_startdate                 = 2
     jobname_missing                   = 3
     job_close_failed                  = 4
     job_nosteps                       = 5
     job_notex                         = 6
     lock_failed                       = 7
     invalid_target                    = 8
     OTHERS                            = 9
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " job_close
*&      Form display_spool
      text
--> p1        text
<-- p2        text
FORM display_spool .
To Read the Job to get the spool details
DATA : l_rqident TYPE tsp01-rqident, " Spool Number
         l_spoolno TYPE tsp01_sp0r-rqid_char.
CLEAR : l_rqident,
          w_lsind,
          wa_jobsteplist.
REFRESH : i_jobsteplist.
SET PF-STATUS 'ZAR02'.
Get the Spool Number
CALL FUNCTION 'BP_JOB_READ'
    EXPORTING
      job_read_jobcount           = w_jobcount
      job_read_jobname            = w_jobname
      job_read_opcode             = '20'
    JOB_STEP_NUMBER             =
   IMPORTING
     job_read_jobhead            = wa_jobhead
   TABLES
     job_read_steplist           = i_jobsteplist
CHANGING
   RET                         =
   EXCEPTIONS
     invalid_opcode              = 1
     job_doesnt_exist            = 2
     job_doesnt_have_steps       = 3
     OTHERS                      = 4
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Read the Job Step list to get the spool number
READ TABLE i_jobsteplist INTO wa_jobsteplist INDEX 1.
CHECK wa_jobsteplist-listident <> space.
Spool Number
l_rqident = wa_jobsteplist-listident.
MOVE l_rqident TO l_spoolno.
Check the spool in TSP01
SELECT SINGLE * FROM tsp01 WHERE rqident = l_rqident.
IF sy-subrc = 0.
    LEAVE TO LIST-PROCESSING.
    CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
      EXPORTING
        spoolid       = l_spoolno
    IMPORTING
      RC            =
      STATUS        =
    PERFORM show_alv.
ENDIF.
w_lsind = sy-lsind.
IF sy-lsind GE 19.
    sy-lsind = 1.
ENDIF.
ENDFORM.                    " display_spool
*&      Form show_alv
      text
--> p1        text
<-- p2        text
FORM show_alv .
Before the import, fill the data fields before CLUSTR.
wa_index1-aedat = sy-datum.
wa_index1-usera = sy-uname.
To Import the selection screen data from Calling Program
IMPORT i_mara
FROM DATABASE indx(st) ID wa_index_key1 TO wa_index1.
FREE MEMORY ID wa_index_key1.
This prepares the field-catalog for ALV.
PERFORM prepare_fieldcatalog.
This displays the output in ALV format .
PERFORM display_alv.
ENDFORM.                    " show_alv
*&      Form display_status
      text
--> p1        text
<-- p2        text
FORM display_status .
To Display the STATUS of the JOB which is exectued in background
CLEAR : wa_jobsteplist.
REFRESH : i_jobsteplist.
WRITE:/ 'DISPLAYING JOB STATUS'.
CALL FUNCTION 'BP_JOB_READ'
    EXPORTING
      job_read_jobcount           = w_jobcount
      job_read_jobname            = w_jobname
      job_read_opcode             = '20'
    JOB_STEP_NUMBER             =
   IMPORTING
     job_read_jobhead            = wa_jobhead
   TABLES
     job_read_steplist           = i_jobsteplist
CHANGING
   RET                         =
   EXCEPTIONS
     invalid_opcode              = 1
     job_doesnt_exist            = 2
     job_doesnt_have_steps       = 3
     OTHERS                      = 4
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
To Display the status text as per the status type
CASE wa_jobhead-status.
    WHEN 'S'. WRITE: / 'Scheduled'.
    WHEN 'R'. WRITE: / 'Released'.
    WHEN 'F'. WRITE: / 'Completed'.
    WHEN 'A'. WRITE: / 'Cancelled'.
    WHEN OTHERS.
ENDCASE.
IF sy-lsind GE 19.
    sy-lsind = 1.
ENDIF.
ENDFORM.                    " display_status
*&      Form display_job_log
      text
--> p1        text
<-- p2        text
FORM display_job_log .
To display the log of the background program
LEAVE TO LIST-PROCESSING.
CALL FUNCTION 'BP_JOBLOG_SHOW_SM37B'
    EXPORTING
      client                    = sy-mandt
      jobcount                  = w_jobcount
      joblogid                  = ' '
      jobname                   = w_jobname
    EXCEPTIONS
      error_reading_jobdata     = 1
      error_reading_joblog_data = 2
      jobcount_missing          = 3
      joblog_does_not_exist     = 4
      joblog_is_empty           = 5
      joblog_show_canceled      = 6
      jobname_missing           = 7
      job_does_not_exist        = 8
      no_joblog_there_yet       = 9
      no_show_privilege_given   = 10
      OTHERS                    = 11.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " display_job_log
*&      Form prepare_fieldcatalog
      text
--> p1        text
<-- p2        text
FORM prepare_fieldcatalog .
CLEAR wa_fieldcat.
wa_fieldcat-fieldname    = 'MATNR'.
wa_fieldcat-tabname      = 'I_MARA'.
wa_fieldcat-reptext_ddic = 'Material no.'.
wa_fieldcat-outputlen    = '18'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname    = 'ERSDA'.
wa_fieldcat-tabname      = 'I_MARA'.
wa_fieldcat-reptext_ddic = 'Creation date'.
wa_fieldcat-outputlen    = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname    = 'ERNAM'.
wa_fieldcat-tabname      = 'I_MARA'.
wa_fieldcat-reptext_ddic = 'Name of Person'.
wa_fieldcat-outputlen    = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname    = 'LAEDA'.
wa_fieldcat-tabname      = 'I_MARA'.
wa_fieldcat-reptext_ddic = ' Last Change'.
wa_fieldcat-outputlen    = '10'.
APPEND wa_fieldcat TO i_fieldcat.
ENDFORM.                    " prepare_fieldcatalog
*&      Form display_alv
      text
--> p1        text
<-- p2        text
FORM display_alv .
Call ABAP List Viewer (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
      it_fieldcat = i_fieldcat
    tables
      t_outtab     = i_mara.
ENDFORM.                    " display_alv
     ZPROGRAM_TWO: This is the 2nd program which would be called from program ZPROGRAM_ONE.
*& Report ZPROGRAM_TWO                                                *
REPORT zprogram_two                            .
PRASHANT PATIL
TABLES : mara.
TYPE-POOLS:slis.
TYPES : BEGIN OF t_mara,
          matnr   TYPE mara-matnr,
          ersda   TYPE mara-ersda,
          ernam   TYPE mara-ernam,
          laeda   TYPE mara-laeda,
        END OF t_mara.
DATA : i_mara        TYPE STANDARD TABLE OF t_mara,
       wa_mara       TYPE t_mara,
       wa_index      TYPE indx,        " For Index details
       wa_index_key TYPE indx-srtfd VALUE 'PRG_ONE',
       wa_index1     TYPE indx,        " For Index details
       wa_index_key1 TYPE indx-srtfd VALUE 'PRG_TWO',
       i_fieldcat        TYPE slis_t_fieldcat_alv,
       wa_fieldcat       LIKE LINE OF i_fieldcat.
SELECT-OPTIONS : s_matnr FOR mara-matnr.
Before the import, fill the data fields before CLUSTR.
wa_index-aedat = sy-datum.
wa_index-usera = sy-uname.
To Import the selection screen data from Calling Program
IMPORT s_matnr
FROM DATABASE indx(st) ID wa_index_key TO wa_index.
FREE MEMORY ID wa_index_key.
SELECT matnr
       ersda
       ernam
       laeda
       FROM mara
       INTO TABLE i_mara
       WHERE matnr IN s_matnr.
PERFORM prepare_fieldcatalog.
PERFORM display_alv.
Before the export, fill the data fields before CLUSTR
wa_index1-aedat = sy-datum.
wa_index1-usera = sy-uname.
EXPORT i_mara
TO DATABASE indx(st) FROM wa_index1 ID wa_index_key1.
*&      Form prepare_fieldcatalog
      text
--> p1        text
<-- p2        text
FORM prepare_fieldcatalog .
CLEAR wa_fieldcat.
wa_fieldcat-fieldname    = 'MATNR'.
wa_fieldcat-tabname      = 'I_MARA'.
wa_fieldcat-outputlen    = '18'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname    = 'ERSDA'.
wa_fieldcat-tabname      = 'I_MARA'.
wa_fieldcat-outputlen    = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname    = 'ERNAM'.
wa_fieldcat-tabname      = 'I_MARA'.
wa_fieldcat-outputlen    = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname    = 'LAEDA'.
wa_fieldcat-tabname      = 'I_MARA'.
wa_fieldcat-outputlen    = '10'.
APPEND wa_fieldcat TO i_fieldcat.
ENDFORM.                    " prepare_fieldcatalog
*&      Form display_alv
      text
--> p1        text
<-- p2        text
FORM display_alv .
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      it_fieldcat = i_fieldcat
    TABLES
      t_outtab    = i_mara.
ENDFORM.                    " display_alv
its possible to display ALV Grid using OO ALV. Following code can be used instead of FM.
In the PBO, add following code
SET PF-STATUS 'ZSTAT'.
If program is executed in background
CALL METHOD cl_gui_alv_grid=>offline
RECEIVING
e_offline = off.
IF off IS INITIAL.
IF container1 IS INITIAL.
CREATE OBJECT container1
EXPORTING
container_name = 'CC_ALV1' .
ENDIF.
ENDIF.
CREATE OBJECT g_grid1
EXPORTING
i_parent = container1.
CALL METHOD g_grid1->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
i_save = 'A'
i_default = ' '
is_layout =
is_print =
IT_SPECIAL_GROUPS =
it_toolbar_excluding =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
CHANGING
it_outtab = i_output
it_fieldcatalog = i_fieldcatalog
IT_SORT =
IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Reward points if useful
Regards
Anji

How can I run the report for different input values at the same time?

Reports version: Report Builder 6.0.8.13.1
Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
How can I run the report at the same time for all the input values and save the time?
Thanks in advance.
Kishore.

Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
and then atleast 4 or 6 reports will run simultaneously.
For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
Thanks
Subodh

Hello I Download Adobe Photoshop CC 2014 Last Night i INSTALLED it But it Crashes in 30-40 Sec After i Launch the Product Without Any Error Message I Need Help Can You Resolve This Problem i Tried Creative Cloud Sign Out Nd Sign iN But iT DidnT ReSolve My

Hello I Download Adobe Photoshop CC 2014 Last Night
i INSTALLED it But it Crashes in 30-40 Sec After i Launch the Product Without Any Error Message
I Need Help Can You Resolve This Problem

Lotfi are you receiving any error messages during the installation? I would recommend reviewing your installation logs for errors. Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files. You are welcome to post any specific errors you discover to this discussion.

HT3775 I get the following message when trying to open an .avi downloaded from my video cam, need help, can not find the codec, thank you.The document "IMAG0026.AVI" could not be opened. A required codec isn't available.

I get the following message when trying to open an .avi downloaded from my video cam, need help, can not find the codec, thank you. This is for Quicktime Player.
"The document “IMAG0026.AVI” could not be opened. A required codec isn't available."

Try Perian.
http://perian.org/

I need help with my Iphone 4 reset cause I will activate it in other country

I need help with my Iphone 4 reset cause I will activate it in other country
Thanks

Help you what?
You have provided no information about your issue or what you are trying to do.

Need help " Can't find a valid editor for this file extension" not sure why I am getting and this or what to do.

also say explorer not reading SWF files and I have to reload them? Not sure what that is either,
Thanks
Jim

Hi Nancy
Trying to update my site got to make some changes. Do you work on sites via remote? I am on Cloud.
: Nancy O.
Sent: Monday, September 01, 2014 3:47 PM
To: James Neidner
Subject: Need help " Can't find a valid editor for this file extension" not sure why I am getting and this or what to do.
Need help " Can't find a valid editor for this file extension" not sure why I am getting and this or what to do.
created by Nancy O. <https://forums.adobe.com/people/Nancy+O.> in Dreamweaver support forum - View the full discussion <https://forums.adobe.com/message/6692200#6692200>

I jailbroke my ipod and its in recovery mode i cant take it out of it and i cant restore becasue i changes host to sariks sever i need help can any one help me

i cant take it out of it and i cant restore becasue i changes host to sariks sever i need help can any one help me please please i just got my ipod i realy need help

Sorry, due to the Terms of Use, problems with jailbroken devices can't be discussed here.

Please i need help i updated my iphone 3gs and now its not activating

i need help i updated my iphone 3gs and now its not activating

What happens when you try to activate the iPhone?
If there is an error message, what is the exact wording of that message?

Please help me with this error: "Apple application support was not found... Error 2"

Can anyone please help me with this error: "Apple application support was not found... Error 2"
I've followed the instructions by removing all Apple files from my laptop, but when I reinstall the iTunes software it still comes up with this message:
"Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2"
Thank you

iTunes "Apple Application Support is required... Error 2" and possible fix.
I know this is a bit late but I came accross this thread trying to resolve this same problem and came up with a solution that worked for me, so thought I would share it here too. I hope it helps someone else.
I just resolved this on Win Vista (should apply equally for Win7 too). Please uninstall iTunes before proceeding though. I'll walk you through the process I followed, if you like you can jump straight to the Solution section.
Problems:
The initial error during the installation of iTunes was:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b 3b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x8007054F
The error (after installing iTunes) when trying to run iTunes was:
Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
After trying various fixes around the forums I came across this MSKB article, which relates to the first installation error:
http://support.microsoft.com/kb/2688946
This lead me to trying to install MS Visual C++ but I received the following error trying to install that:
Error 1935.An error occurred during the installation of assembly ‘Microsoft.VC80.ATL,type=”win32”,version=”8.0.50727.762”,publicKeyToken=”1fc8b3 b9a1e18e3b”,processorArchitecture=”amd64”’. Please refer to Help and Support for more information. HRESULT: 0x80070BC9. Assembly interface: IassemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
Note: The installation of VC++ rolls back when it fails.
Solution:
Through this error I found this MSKB article:
http://support.microsoft.com/kb/946414
The Automated MS "Fix It" msi package didn’t work.
Note: Please backup your registry first (see the above MSKB article for instructions).
I opened the registry and (as instructed in the MSKB article) deleted the following keys:
HKEY_LOCAL_MACHINE\COMPONENTS\
PendingXmlIdentifier
NextQueueEntryIndex
AdvancedInstallersNeedResolving
Reboot and reinstall iTunes.
If it helps you please like this so others can find it.

Unable to connect to XL reporter. Metainfo.xml not found!

I cannot open XLR in SAP. I have Excel 2003 and SAP 2007 PL 42. This is the error message I am getting:
Unable to connect to XL reporter. Cause: Metainfo.xml not found! Please contact admin to fix the repository connection. Error! server communication failed.

Hi
Take a look at SAP note : 848646
Also
loook this thread for reference
XL Reporter - Connection Error
Hope this helps
Bishal

Need help - can't run a report cause value set not found

Similar Messages

Maybe you are looking for