Need Help Connecting to External Server

Hello,
I installed FMS 2.0 on a server that i have and i'm trying to
connect to it from a local swf file. I have no idea how to
reference the Media Server. Is it by IP? Do I need to set up
something additionally on the server like in IIS? I'm totally
clueless. Any advice or point in the right direction would be
greatly appreciated.
Here is what i'm trying to do...
var nc:NetConnection = new NetConnection();
nc.onStatus = function (info)
trace(info.code);
if (info.code == "NetConnection.Connect.Success")
trace("connection successful");
nc.connect("rtmp://SERVERIP/simpleconnect");
how do I reference the remote flash media server?
Thanks in advance?

You need to have an application directory on FMS - just
create a subdirectory in the FMS_ROOT/applications directory, name
it "test". Then change your client code to connect to
rtmp://server.domain.com/test (or
rtmp://server.ip.address/test - ip or server name should not
matter)
hth

Similar Messages

  • Need help connecting to exchange server mail

    Hi- I am trying to set up my exchange server email on my iPad2. I've put in all the info, but it is unable to verifty account info.  I've have good wifi reception- any suggestions?
    thanks-

    Read here...
    iOS: Exchange ActiveSync Account Quick Setup Guide

  • I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5.  It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465

    I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5.  It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465 SSL) and none of them work. Please help!

    You will need to get the required info to create/access the account with an email client from your school.
    Are you currently accessing the account with an email client on your computer - if you have a Mac with the Mail.app, or if you have a PC with Outlook Express, etc.? If so, you can get the required account settings there.

  • Deperately need help setting up external midi devices

    I need help setting up external midi devices.....Motu828...Midi express...RolandXV3080....Motif rack.......HELP

    Theres not really much to setup. Assuming your synths are connected to the MIDI Express already..
    In Logic, make a new MIDI track. On the left hand side in the track inspector, among the parameters you'll see an option for MIDI Port and Channel. Just pick which port the track is going to, set the channel and device id and play (And be glad you never had to deal with setting up the old Environment window in Logic 5 and below).
    If you really wanna get into it and have all your MIDI ports named after the synth thats connected to it, open up Audio Midi Setup, create a device icon for each synth you have and draw the cables from each device to whatever port its connected to on the midi interface's icon.
    Then in Logic everytime you pick your MIDI port on your track, instead of MIDI Port 1, MIDI Port 2, etc.,
    it would be labelled XV-3080, Motif Rack, and so on.. I dont think theres anyway to do this within Logic itself (you can change the labels on your audio ins and outs, but not MIDI as far as I can recall)..
    If youre talking about having access to patch names and whatnot like Digital Performer and Cubase let you do, Logic doesnt use the xml patch lists everyone else does. The above steps are pretty much all there is to be done as far as MIDI.
    Heres my Audio Midi Setup window for reference.
    Now when I select MIDI Port 1 in Logic its named MWXT, port 2 is SR-16, etc..

  • I need to connect an external webcam to an iPad two, is this possible?

    I need to connect an external webcam to my ipad two. Any idea if this is possible and how do you do it?

    Not possible.

  • Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network

    Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network.
    My Mac runs lion and the windows desktop runs Windows XP
    I have tried for a few hours or so to connect my mac to this printer over a home network.
    For your information it does work when connected directly to my mac using a USB Cable.
    If there is no soultion could I have help getting the drivers for a Dell All-in-One Photo 926

    In most cases you can connect to the Windows shared printer from the Mac. But there is a dependence on the Mac driver being compatible. For many consumer inkjets, the vendor created driver cannot be used for this type of connection so you need to look at alternative drivers, such as Gutenprint or PrintFab. If you can tell us which brand and model of printer you have shared from Windows then we can answer your question with the preferred procedure on the Mac.

  • Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

    Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

    Turn on Personal Hotspot on your iPhone, select WiFi, set a password. Then select your hotspot on your MacBook Pro and sign in.

  • HT4199 I need help connecting to my WIFI.  I purchased a new router and am having trouble connecting.

    I need help connecting to my WiFi.  I purchased a new router and am having trouble connecting.

    your gonna want to contact your internet service provider for the best info on setting that router up.  but for connecting to wifi on the iphone, ipad, and ipod
    go to
    settings > wifi
    then choose your connection and enter the password

  • Need help connecting to my home Wireless Network

    I need help connecting my LaserJer M1212nf MFP to my home wirless network. I would like to use Apple's AirPrint, and be able to print from my iPad.
    I've spent a few hours following the directions I found on the manuals through hp.com and I've had no luck. I've already unistalled and reinstalled the printer. I've also updated the firmware. If anyone can provide assistance I would greatly appreciate it. Thank you!

    This is NOT a wireless printer (see product spec: http://www.shopping.hp.com/shopping/pdf/ce841a.pdf), you can NOT add the printer to the wireless network. This printer do support LAN connection, so if your wireless router has LAN ports, you can added it to your home network by connecting a network cable from the printer to a LAN port on the router. You need then reinstall the printer as a network printer, to use airprint.
    ======================================================================================
    * I am an HP employee. *
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
    ***Click on White “Kudos” STAR to say thanks!***

  • I need to connect a external GPS antenna on my IPAD3 wifi; is it possible?

    I need to connect a external GPS antenna on my IPAD3 wifi; is it possible?

    If yo uhave a pre-existing GPS that you are looking to use, you can use the GPS cable provided by http://gps4ios.com
    Thx

  • I need to connect an external FW hard drive & digidesign 002 mixer

    I need to connect an external la cie portable firewire drive & a Digidesign 002 FW 400 mixer to a macbook pro 13".  Should I daisy chain with the hard drive in the middle or use a firewire hub ?

    USB connections are by nature designed to be plugged and unplugged as needed.
    Unless the BackupDrive is backing up, you could potentially drag the drive to the Trashcan before disconnecting the cable, and then disconnect. 
    The Scanner should also have no issues being unplugged.
    If You don't need the keyboard while burning, You could unplug that.
    The Mouse you'll likely need, to interact with the burning software, so probably that would not be a good thing to unplug.
    All in all the Scanner and Keyboard should be the least hassle to unplug.
    For the future you may want to buy a USB HUB so you have more USB ports you can use without having to unplug things.

  • I need help connecting my iPhone and computer together.

    I need help connecting my iPhone to computer

    Howdy sprinklemk,
    Welcome to Apple Support Communities.
    Take a look at the iPhone User Guide, it answers your question about how to connect your iPhone to your computer and provides additional information that you may find helpful.
    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    You may need to connect iPhone to your computer in order to complete activation. Connecting iPhone to your computer also lets you sync photos and other content to iPhone from your computer, using iTunes. See Sync with iTunes on page 18.
    To use iPhone with your computer, you need:
    An Internet connection for your computer (broadband is recommended)
    A Mac or a PC with a USB 2.0 or 3.0 port, and one of the following operating systems:
       OS X version 10.6.8 or later
       Windows 8, Windows 7, Windows Vista, or Windows XP Home or Professional with Service Pack 3 or later
    Connect iPhone to your computer. Use the Lightning to USB Cable (iPhone 5 or later) or 30-pin the other device.
    Cheers,
    -Jason

  • Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c

    Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c.  I need assistance on connecting these together so I can run a report.  I am not an IT person so if someone could dumb it down it would be great.
    Thanks,
    NBGHealth

    Hello,
    I assume GBS Agency Expert 6.7.6c is some sort of database or data source? If you have an ODBC driver then create or use a System DSN to the database. Then you can create a report using that DSN.
    Otherwise I suggest you contact the makers of GBS Agency Expert 6.7.6c and ask them how to connect to the database.
    Let them know CR is ANSII 92 ODBC 3 compliant.
    Thank you
    Don

  • Need help connecting external monitor

    My brother needs help with connecting an external monitor to his 20" iMac G5. He has the adapter with the standard monitor port, and when plugged in, the monitor duplicates the iMac screen. His question is, how can he set it so that the desktop is extended, instead of duplicated? I, myself, have a MacBook and two months ago I used my adapter to connect a projector, and I remember an option where I could choose between duplicate and extended desktop, and right now I tried to find it on my MacBook and well as my Intel iMac and I can't find the option, and neither can he.
    Please help, thanks!

    The iMac G5 can only mirror the internal display unless you hack the firmware. 
    Display options like that only appear when you connect a display which is why you can't see them on the MB at the moment.
    mrtotes

  • How to connect to external server using router from VLAN's

    Hi, I am newbie. I am trying to build network system in Packet Tracer.
    Now I have such network layout.
    I have different VLAN's Accounting and Sales. I have configured this using subinterface in router to allow computers from different vlan's communicate with each other. Everything works.
    Let's assume that there are next subnets and VLAN's. Acct. VLAN (2) (ip's 172.168.0.1-172.168.0.254/24) and Sales VLAN (4) (ip's 172.168.1.1-172.168.1.254/24).
    But I need to connect all this computers to the external server.  That has ip , for instance 192.168.20.13/24. Like this.
    I don't know hot to correctly configure router to make it possible for computers to connect to this server. I have connected switch to the another router interface. And than connected server to the switch and specified ip 192.168.20.13/24. Than I tried to set ip to the router interface from the same subnet like 192.168.20.22/24. So now router can communicate with server.
    But how to allow computers to communicate with the server. Please help. I am newbie.
    I would be grateful for any help.

    Hi Androgen,
    One question for you..How does the sales VLAN computers communicate with the accounting VLAN machines? It's through the inter-VLAN routing that you have already setup.
    Communicating to the external server is also similar to this.
    The computer's in the VLAN should be configured with the default gateway IP which is the the L3 sub-interface IP for that subnet.
    Also, the external server needs to have a default gateway to communicate with other remote subnet. The default gateway of that server would be 192.168.20.22 which is the L3 interface for your external subnet.
    CF

Maybe you are looking for