Need help creating script for specific instance

I am having trouble coming up with a working script for this part of the pricing form I am editing. I am trying to get the calculation fields to the right to change and populate in the respective field based on the selection in the Material Type dropdown. Would it be less of a headache if I made another text field to calculate the LE versions separately instead of trying to merge them into one field? I have attached screenshots below to give you an example of what I'm working with. Any help with this is greatly appreciated!
Script I'm tinkering with at the moment:
//Dropdown37 = Quantity Field
//Type of Door IB = Material Type dropdown
var x = this.getField("Type of Door IB").value;
if ( x = 1468 ) event.value = x * this.getField("Dropdown37").value;
if (x = 1202) event.value = x * this.getField("Dropdown37").value;
else event.value = 0;

The comparison operator in JS is "==", so change this line:
if ( x = 1468 )
To this:
if ( x == 1468 )
(as well as the other if-statement).

Similar Messages

Need help creating script to clear data with user inputs

Hi experts.
I need to create a script to clear data in a DEV system from a particular junction.
Basically, I need the user to enter a CATEGORY, ENTITY and TIME which will then be used to delete all data in a particular table which meetes those criteria.
I tried to write it in SSIS, but can't get a user input box.
Also, Stored Procedures are not designed to open input boxes for these entries.
Therefore, is there a way to do this in BPC script logic?
I believe that I might be able to write either a Stored Procedure or DTSX package and then pass data from BPC Run Package?
If this is correct, how would I go about it?
Also, would it be possible to read the DISTINCT entries for Category, Time and Entity and present as a dropdown list? (It doesn't matter too much if not, a manual entry would have to do).
I will admit that I have no experience of script logc, so any docments and/or pointers would be appreciated.
Thanks

Thank Karthik, but I can't use the clear for this job.
Specifically, I need this to delete from the LCK tables whenever data gets stuck, so if anyone can tell me the format to use, I'd be extremely grateful
(And I appreciate that this is not recommended, but it's a DEV system and we need a way to clear these locks quickly when they occur)
Edited by: Pie Eyed on Oct 1, 2011 2:54 PM

Need Help with scripting for Automator/AppleScript.

Hi everybody,
I am building a small app for my mac, What I need is a script that can rename a file that I drop on it.
and example being:
example.jpg
(when I drop it on the app, I want the app to change the filename of the document to "Image.jpg"
I have tried this with Automator, but it requires that I specify the file to be changed, what I need is something that will change the name of any file I drag onto it.
I am using it for application specific files.
Kind regards,
Pete.
iBook G4; 60GB Hard Drive, 512MB RAM, Airport Extreme

Open the Script Editor in the
/Applications/AppleScript/ folder and enter the
following:
on open(the_file)
tell application "Finder"
set name of the_file to "Image"
end tell
end open
Save this script as an application.
(11347)
this script compiled correctly; however when run it returned the following error "Can't set name of (the_file) to "Image.jpg"
I am also given the option of editing the script or just quitting.
thanks for your help

Aperture Workflow - need help creating workflow for photo management

Hi -
I currently shoot with a Canon SD890 (point & shoot) and a Nikon D300 (SLR). My photography is either personal photography or street photography. I may use some of my photography for a web project but that should not be considered right now. I shoot jpegs with the SD890 and RAW with the D300. I need to create a workflow that will allow me to manage all of my photos as well as the RAW vs JPEG aspect. Here are a few initial questions:
1) Should I separate the RAW and JPEGs in Aperture (two libraries)? One library for finished photos and one for negatives?
2) What folder structure should I use? Since I am not a professional photographer, I won't be shooting projects. I think something date or event driven would be best (preferably both).
I am interested to hear how others do this...especially if you use both point & shoot and SLR cameras.
Thanks for your help!

jnap818 wrote:
1) Should I separate the RAW and JPEGs in Aperture (two libraries)? One library for finished photos and one for negatives? I am interested to hear how others do this...especially if you use both point & shoot and SLR cameras.
No, use a single Library. Aperture will have no problems with the various formats or with various different cameras.
2) What folder structure should I use? Since I am not a professional photographer, I won't be shooting projects. I think something date or event driven would be best (preferably both).
Actually those date or event driven batches of images are very logically "Projects" in Aperture. Simply name each group of images as you import into AP as a new Project.
IMO it is not good to import camera-to-Aperture (or direct to any app other than the Finder). Best is to use a card reader and use the Finder to copy images from the camera card to a folder on the computer hard drive.
Below is my Referenced-Masters workflow:
• Remove the CF card from the camera and insert it into a CF card reader. Faster readers and cards are preferable.
• Finder-copy images from CF to a labeled folder on the intended permanent Masters location hard drive. I label that folder with the Project name suffixed with _masters, that way I can always find the Masters if Aperture forgets where they are.
• Eject CF.
• Burn backup copies of the original images to DVDs or to hard drives (optional backup step).
• Eject backup DVDs/hard drives (optional backup step).
• From within Aperture, import images from the hard drive folder into Aperture selecting "Store files in their current location."
• Review pix for completeness (e.g. a 500-pic shoot has 500 valid images showing).
• Reformat CF in camera, and archive DVDs of originals off site.
Note that the "eject" steps above are important in order to avoid mistakenly working on removable media.
I strongly recommend that every Aperture user spend $35 and work through the tutorial CD Apple Pro Training Series: Aperture 2 (Apple Pro Training Series) by Ben Long, Richard Harrington, and Orlando Luna (Paperback - May 8, 2008), Amazon.com. Note that the value is in working the tutorial, not in using the book as a manual.
Good luck!
-Allen Wicks

Need help creating URL for getImage

In the following code example, I get an error when javac compiling. I need help, because I cannot determine what is wrong. "....." denotes extraneous code removed for readability.
import java.awt.*;
import java.io.*;
import java.applet.*;
import java.net.*;
public class testapp extends java.applet.Applet implements java.lang.Runnable
public static void main(String[] argv)
��.
public void init()
Toolkit toolkit = Toolkit.getDefaultToolkit();
Image image1 = toolkit.getImage("imageFile.gif");
Image image2 = toolkit.getImage( new URL("http://java.sun.com/graphics/people.gif"));
��
javac reports:
unreported exception java.net.MalformedURLException; must be caught or declared to be thrown
Image image2 = toolkit.getImage( new URL ("http://java.sun.com/graphics/people.gif"));
................................................^

With this recommended code:
===================
try { Image image2 = toolkit.getImage( new URL ("http://java.sun.com/graphics/people.gif"));}catch(MalformURLExceptione){System.out.println("Error"); }
======================
it now compiles ok, but when I access the page through the browser, I get "applet not initialized" and the page times out.
With the lines commented out, the page loads.
What does this tell us:
- all we have done is mask a problem that the compiler previously highlighted.
But what is the problem?
As far as I can tell, the code is exact copies from the examples posted online.
Where should System.out.println("Error"); be displayed? I can't find it. There might be a clue in the error message.

Need Help with script For Bulk Users Name & Description Updation

Hi Guys,
I have below requirement :
We are having one windows 2008 stand alone server with 200+ local users (No Active Directory Account).
1. Requirement is to update each account's "Full name" and "Description field" with same text. Which means , Full name and Description field will be same with same text. No other changes are required. )Attached the screenshot)
Can you guys pls help me out with any scripting (vbs , powershell , DOS .etc etc) method to accomplish this task quickly as manual process is very troublesome and take long time.
Any help will be highly appreciated,
Thanks,
Suvajit Basu

Hi,
I dont have any script but seeking for a help.
Thanks,
Suvajit Basu
In that case you should read this first:
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/a0def745-4831-4de0-a040-63b63e7be7ae/posting-guidelines?forum=ITCG
Prewritten scripts can be found in the repository (Brent has already suggested one for you):
https://gallery.technet.microsoft.com/scriptcenter
If you can't find what you need and you can't write your own, you can request a script here:
https://gallery.technet.microsoft.com/scriptcenter/site/requests
Let us know if you have any specific questions.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Need help writing script for Digital DAQ

Hello,
I am trying to write an aquisition program for digital input coming from a hall sensor. I will be passing a magnet over a hall sensor on a motor and want to record the number of rotations. I have pasted together a script based on various websites, but it isn't functioning the way I want. I would like to be able to collect data points indefinately, or fixed, and then print out the resulting count. I have attepted to use the ctypes wrapper in Python. The NI functions remain unchanged though, so if you don't know Python it shouldn't be a problem to read. I am using a NI PCI-6503.
NI PCI-6503
NI PCI-6503
NI PCI-6503
The code:
# C:\Program Files\National Instruments\NI-DAQ\Examples\DAQmx ANSI C\Analog In\Measure Voltage\Acq-Int Clk\Acq-IntClk.c
import ctypes
import numpy
nidaq = ctypes.windll.nicaiu # load the DLL
# Setup some typedefs and constants
# to correspond with values in
# C:\Program Files\National Instruments\NI-DAQ\DAQmx ANSI C Dev\include\NIDAQmx.h
# the typedefs
int32 = ctypes.c_long
uInt32 = ctypes.c_ulong
uInt64 = ctypes.c_ulonglong
float64 = ctypes.c_double
TaskHandle = uInt32
# the constants
DAQmx_Val_ChanForAllLines = int32(0)
def CHK(err):
"""a simple error checking routine"""
if err < 0:
buf_size = 200
buf = ctypes.create_string_buffer('\000' * buf_size)
nidaq.DAQmxGetErrorString(err,ctypes.byref(buf),buf_size)
raise RuntimeError('nidaq call failed with error %d: %s'%(err,repr(buf.value)))
# initialize variables
taskHandle = TaskHandle(0)
max_num_samples = 1000
# array to gather points
data = numpy.zeros((max_num_samples,),dtype=numpy.float64)
# now, on with the program
CHK(nidaq.DAQmxCreateTask("",ctypes.byref(taskHandle)))
CHK(nidaq.DAQmxCreateDIChan(taskHandle,'Dev1/port1/line1',"", DAQmx_Val_ChanForAllLines))
CHK(nidaq.DAQmxStartTask(taskHandle))
read = int32()
CHK(nidaq.DAQmxReadDigitalU32(taskHandle,int32(-1),float64(1),DAQmx_Val_GroupByChannel,data.ctypes.data,max_num_samples,ctypes.byref(read),None))
print "Acquired %d points"%(read.value)
if taskHandle.value != 0:
nidaq.DAQmxStopTask(taskHandle)
nidaq.DAQmxClearTask(taskHandle)
print "End of program, press Enter key to quit"
raw_input()
This script returns "Acquired 1 points" immediately, regardless of how many times the hall sensor has been switched.
I apologize for the sloppy code, but I understand very little of the underlying principles of these DAQ functions, despite reading their documentation. Seeing as how the code does not return an error, I am hoping there is just a minor tweak or two that will be farily obvious to someone with more experience.
Thanks

Hey Daniel,
Most of this script is from http://www.scipy.org/Cookbook/Data_Acquisition_with_NIDAQmx.
I needed to run the ReadDigitalU32 function in Python loop because my DAQ device did not support timed aquistion and I don't have LabView.
import numpy
import time
import ctypes
nidaq = ctypes.windll.nicaiu # load the DLL
# Setup some typedefs and constants
# to correspond with values in
# C:\Program Files\National Instruments\NI-DAQ\DAQmx ANSI C Dev\include\NIDAQmx.h
# the typedefs
int32 = ctypes.c_long
uInt32 = ctypes.c_ulong
uInt64 = ctypes.c_ulonglong
float64 = ctypes.c_double
TaskHandle = uInt32
# the constants
DAQmx_Val_Cfg_Default = int32(-1)
DAQmx_Val_Volts = 10348
DAQmx_Val_Rising = 10280
DAQmx_Val_FiniteSamps = 10178
DAQmx_Val_GroupByChannel = 0
DAQmx_Val_ChanForAllLines = int32(0)
# initialize variables
taskHandle = TaskHandle(0)
max_num_samples = 10000
data = numpy.zeros((max_num_samples,),dtype=numpy.float64)
read = uInt32()
bufferSize = uInt32(10000)
def CHK(err):
"""a simple error checking routine"""
if err < 0:
buf_size = 200
buf = ctypes.create_string_buffer('\000' * buf_size)
nidaq.DAQmxGetErrorString(err,ctypes.byref(buf),buf_size)
raise RuntimeError('nidaq call failed with error %d: %s'%(err,repr(buf.value)))
# Start up DAQ
CHK(nidaq.DAQmxCreateTask("",ctypes.byref(taskHandle)))
CHK(nidaq.DAQmxCreateDIChan(taskHandle,"Dev?/port?/line?","", DAQmx_Val_ChanForAllLines))
CHK(nidaq.DAQmxStartTask(taskHandle))
#initialize lists and time 1
t1 = time.time()
times = []
points = []
while True:
try:
CHK(nidaq.DAQmxReadDigitalU32(taskHandle,int32(-1),float64(1),
DAQmx_Val_GroupByChannel,data.ctypes.data,uInt32(2*bufferSize.value)
,ctypes.byref(read), None))
t2 = time.time()
#data[0] is the position in the numpy array 'data' that holds the value aquired
#from your device
points.append(data[0])
times.append(t2 - t1)
t1 = time.time()
#Choose time interval between data aquisition
time.sleep(.02)
except KeyboardInterrupt:
break
#process the lists of points and time intervals as you so choose
Thanks for the help!
Paul

Need help creating actionListener for an array of text fields

I am working on a school project, so I am very new to Java. I have a program which is basically a unit converter. Each unit type has its own tab. I was able to dynamically create text fields in each tab and now I need to add actionListener to each of those text fields. Probelm is, the text fields are not really unique. I guess they're only unique within their tab. So now I am having difficulty referring to my text fields. If you look at my actionListener in the code below, I am trying to refer to it as unitTFs[0].getText() and that's not working. Please help. Thanks in advance.
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class UnitConverter extends JPanel
public UnitConverter()
String[] lengthUnits = {"cm","m","inch","feet","yard","mile"};
String[] areaUnits = {"m2","a","feet2","yd2","Acre","ha"};
String[] massUnits = {"g","kg","ton","ounce","pound"};
String[] volumeUnits = {"liter","m3","inch3","feet3","Gallon","Barrel"};
String[] tempUnits = {"C","F"};
ImageIcon lengthICN = new ImageIcon("java-swing-tutorial.JPG");
ImageIcon areaICN = new ImageIcon("java-swing-tutorial.JPG");
ImageIcon massICN = new ImageIcon("java-swing-tutorial.JPG");
ImageIcon volumeICN = new ImageIcon("java-swing-tutorial.JPG");
ImageIcon tempICN = new ImageIcon("java-swing-tutorial.JPG");
JTabbedPane tabPaneJTP = new JTabbedPane();
JPanel lengthPNL = tabContents(lengthUnits);
tabPaneJTP.addTab("Length", lengthICN, lengthPNL);
tabPaneJTP.setSelectedIndex(0);
JPanel areaPNL = tabContents(areaUnits);
tabPaneJTP.addTab("Area", areaICN, areaPNL);
JPanel massPNL = tabContents(massUnits);
tabPaneJTP.addTab("Mass", massICN, massPNL);
JPanel volumePNL = tabContents(volumeUnits);
tabPaneJTP.addTab("Volume", volumeICN, volumePNL);
JPanel tempPNL = tabContents(tempUnits);
tabPaneJTP.addTab("Temperature", tempICN, tempPNL);
//Add the tabbed pane to this panel.
setLayout(new GridLayout(1, 1));
add(tabPaneJTP);
protected JPanel tabContents(String[] units)
JPanel tabPNL = new JPanel();
JTextField[] unitTFs = new JTextField[units.length];
JLabel[] unitLs = new JLabel[units.length];
for (int i = 0; i < units.length; i++)
unitTFs[i] = new JTextField("0");
unitLs[i] = new JLabel(units);
tabPNL.add(unitTFs[i]);
tabPNL.add(unitLs[i]);
tabPNL.setLayout(new GridLayout(units.length, 1));
return tabPNL;
private class CmHandler implements ActionListener
public void actionPerformed(ActionEvent e)
double cm, m;
cm = Double.parseDouble(unitTFs[0].getText());
public static void main(String[] args)
JFrame frame = new JFrame("Unit Converter Demo");
frame.getContentPane().add(new UnitConverter(), BorderLayout.CENTER);
frame.setSize(500, 500);
frame.setVisible(true);

Variables only have scope in the method (or block) in which they are created. That means if you create a variable in one function, you can't use it in another.
If you want to use a variable in two different functions, you have to make it a member variable.
[Declaring Member Variables|http://java.sun.com/docs/books/tutorial/java/javaOO/variables.html]

Need Bookmark creation script for Paragraph style. Anybody can help me pl?

Need Bookmark creation script for Paragraph style. Anybody can help me pl?

Hi hasvi,
I wrote a similar script which creates a bookmark on each page in the "main" text frame at the begining of the frame (the 1st insertion point). Here I attached the script and a couple of sample documents: before and after. It's more complex than what you want but you can use it as a starting point. In fact, you have to find a certain paragraph style, loop through every found item and insert a bookmark, say, at the beginning of the found text.
The dialog box
Bookmarks added
Regards,
Kas

A wallet needs to be configured for this instance of Application Express

hi
I m very new to APEX. I could create web service client with wsdl. But when service is on https i get message
"a wallet needs to be configured for this instance of Application Express".
I have created wallet using OWM (10.2.0.1.0) at location c:\del_sometime
Using admin i configured APEX instance settings wallet as
Wallet Path = file:c:\del_sometime
And checked in database too
SQL> ALTER SESSION SET CURRENT_SCHEMA = APEX_030200;
Session altered.
SQL> SELECT
2 APEX_INSTANCE_ADMIN.GET_PARAMETER('WALLET_PATH')
3 from dual;
APEX_INSTANCE_ADMIN.GET_PARAMETER('WALLET_PATH')
file:c:\del_sometime
Any idea whats wrong? I am following steps from http://download.oracle.com/docs/cd/E14373_01/admin.32/e13371/adm_wrkspc.htm#BABFBJEA

also whe I try following i keep getting error failure to open file. I am on XP and file is present with proper permissions.
SQL> SELECT utl_http.request('https://support.oracle.com/',null,'file:c:\del_sometime\') from dual;
SELECT utl_http.request('https://support.oracle.com/',null,'file:c:\del_sometime\') from dual
ERROR at line 1:
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1577
ORA-28759: failure to open file
ORA-06512: at line 1

Need help with a For loop that uses a Break statement

I need to create a for loop which counts down from 100-50 and divides the number being counted down by a counter. Can anyone help me?
public class Break
public static void main ( String args []) (;
     int total = 0
     int counter = 0
     for { (int number = 100; total >=50; total --)
     if (counter == 0)
     break;
     } // end of for loop
     int output = number/counter
     system.out.printf("The number is" %d output/n)
     }// end of method main
}// end of class Break

Im sorry I didnt explain myself very well i do not need the break statement at all.
I now have this code:
public class BreakTest
   public static void main( String args[] )
      int count; // control variable also used after loop terminates
     for (int i = 100; i >= 50; i = ++count)
   if (i >= 50) {
    continue;
      System.out.printf( "\nBroke out of loop at count = %d\n", count );
   } // end main
} // end class BreakTest
/code]
and i get these error messages:
F:\csc148>javac BreakTest.java
BreakTest.java:9: variable count might not have been initialized
     for (int i = 100; i >= 50; i = ++count)
                                      ^
BreakTest.java:15: variable count might not have been initialized
      System.out.printf( "\nBroke out of loop at count = %d\n", count );
                                                                ^
2 errors

Uber Noob Needs Help Creating website!

I need help creating my webpage: It has a textbox on it were
the user enters a URL and it then redirects the end user to that
URL when they press the GO Button. It also has a check box saying
"Hide my IP", If the end user clicks this box and then clicks go
they will be directed to the website they stateted in the Textbox
but this time it shall mask there IP Address so they can bypass
proxys and surf anonomosly. Please can someone give me some HTML
code i could use for this site or a Link to a website that can give
me the code.

I assume the application is connecting to Oracle using an application ID/password. If so, check to see if that user has a private synonyn to the table. If so drop it since you have a public synonym.
Verify that the public synonym is in fact correct. Drop and recreate the public synonym if you cannot select against the synonym name using an ID that can perform select * from inhouse.icltm where rownum = 1. That is if this other user cannot issue select * from icltm where rownum = 1 without an error.
Check that the application ID has the necessary object privileges on the table.
Queries you need
select * from dba_synonyms
where table_owner = 'INHOUSE'
and table_name = 'ICLTM'
You may find both public and private synonms. Either fix or delete. (Some may reference someelses.icltm table if one exists)
select * from dba_tab_privs
where table_name = 'ICLTM'
and owner = 'INHOUSE'
Note - it is possible to create mixed case or lower case object names in Oracle by using double quotes around the name. Do not do this, but do look to see that this was not done.
You could also query dba_objects for all object types that have the object_name = 'ICLTM'
HTH -- Mark D Powell --

When do I really need to create indexes for a table?

Once I was talking to a dba in a conference.
He told me that not always I have to create indexes for a single table, it depends of its size.
He said that Oracle read registers in blocks, and for a small table Oracle can read it fully, in a single operation, so in those cases I don't need indexes and statistcs.
So I would like to know how to calculate it.
When do I really need to create indexes for a table?
If someone know any documment that explain that, or have some tips, I'd aprecciate.
Thanks.
P.S.: The version that I'm using is Oracle 9.2.0.4.0.

Hi Vin
You mentioned so many mistakes here, I don't know where to begin ...
vprabhu_2000 wrote:
There are different kinds of Index. B-tree Index is by default. Bit map index, function based index,index organized table.
B-tree index if the table is large This is incorrect. Small tables, even those consisting of rows within just one block, can benefit from an index. There is no table size too small in which an index might not be benefical. William Robertson in his post references links to my blog where I discuss this.
and if you want to retrieve 10 % or less of data then B-tree index is good. This is all wrong as well. A FTS on a (say) million row table could very well be more efficient when retrieving (say) just 1% of data. An index could very well be more efficient when retrieving 100% of data. There's nothing special about 10% and there is no such magic number ...
>
Bit Map Index - On low cardinality columns like Sex for eg which could have values Male,Female create a bit map index. Completely and utterly wrong. A bitmap index might be the perfect type of index, better than a B-Tree, even if there are (say) 100,000 distinct values in the table. That a bitmap index is only suitable for low cardinality columns is just not true. And what if it's an OLTP application, with lot's of concurrent DML on the underlining table, do you really think a bitmap index would be a good idea ?
>
You can also create an Index organized table if there are less rows to be stored so data is stored only once in index and not in table. Not sure what you mean here but an IOT can potentially be useful if you have very large numbers of rows in the table. The number of rows has nothing to do with whether an IOT is suitable or not.
>
Hope this info helps. Considering most of it is wrong, I'm not sure it really helps at all :(
Cheers
Richard Foote
http://richardfoote.wordpress.com/

Do I need to create billing for FD (free delivery) sales order

Hi
I have a question. I created first a sales order (FD) in our sap system. but I don't know whether I need to create billing for the FD order. when I try to create billing for this FD order, SAP cannot to process it.
I also research configuration. in VOV8, SAP not set billing function.
thanks
Henry

Hi henry
If you have created Free of charge delivery (FD) sales order then the item category will be KLN only.After PGI then stock level will reduce and the effect of the stock is that you are issuing stock to customer at free of charge.And as you have assigned cost center then the data will flow to the controlling area and the Financial document after PGI.
Secondly if you assign TANN as a item category and do delivery and then PGI then if the reference document is different then it will have affect as the KMN and TANN item categories doesn't have same features
Regards
Srinath

I am in need of ai script for arcing text

i am in need of ai script for arcing text

A little vague aren't we… Is this the kind of arcing you mean? Text along a curve or do you mean distorting into an arch like some plug-in can?
#target illustrator
var doc = app.activeDocument;
doc.defaultFilled = false, doc.defaultStroked = true;
var textPath = doc.pathItems.ellipse( 0, 0, doc.width, doc.height );
textPath.pathPoints[3].selected = PathPointSelection.ANCHORPOINT;
app.cut();
doc.selection = null;
app.redraw();
var tp = doc.textFrames.pathText( doc.pathItems[0], 0, 0, TextOrientation.HORIZONTAL );
tp.textRange.paragraphAttributes.justification = Justification.CENTER;
tp.textRange.characterAttributes.size = 60;
tp.contents = 'I am in need of ai script…';
var tpd = tp.duplicate();
tpd.translate( 0, -150 );
tpd.textRange.characterAttributes.size = 90;
tpd.contents = '…for arcing text?';

Need help creating script for specific instance

Similar Messages

Maybe you are looking for