Need help creating script to clear data with user inputs

Hi experts.
I need to create a script to clear data in a DEV system from a particular junction.
Basically, I need the user to enter a CATEGORY, ENTITY and TIME which will then be used to delete all data in a particular table which meetes those criteria.
I tried to write it in SSIS, but can't get a user input box.
Also, Stored Procedures are not designed to open input boxes for these entries.
Therefore, is there a way to do this in BPC script logic?
I believe that I might be able to write either a Stored Procedure or DTSX package and then pass data from BPC Run Package?
If this is correct, how would I go about it?
Also, would it be possible to read the DISTINCT entries for Category, Time and Entity and present as a dropdown list? (It doesn't matter too much if not, a manual entry would have to do).
I will admit that I have no experience of script logc, so any docments and/or pointers would be appreciated.
Thanks

Thank Karthik, but I can't use the clear for this job.
Specifically, I need this to delete from the LCK tables whenever data gets stuck, so if anyone can tell me the format to use, I'd be extremely grateful
(And I appreciate that this is not recommended, but it's a DEV system and we need a way to clear these locks quickly when they occur)
Edited by: Pie Eyed on Oct 1, 2011 2:54 PM

Similar Messages

Need help creating script for specific instance

I am having trouble coming up with a working script for this part of the pricing form I am editing. I am trying to get the calculation fields to the right to change and populate in the respective field based on the selection in the Material Type dropdown. Would it be less of a headache if I made another text field to calculate the LE versions separately instead of trying to merge them into one field? I have attached screenshots below to give you an example of what I'm working with. Any help with this is greatly appreciated!
Script I'm tinkering with at the moment:
//Dropdown37 = Quantity Field
//Type of Door IB = Material Type dropdown
var x = this.getField("Type of Door IB").value;
if ( x = 1468 ) event.value = x * this.getField("Dropdown37").value;
if (x = 1202) event.value = x * this.getField("Dropdown37").value;
else event.value = 0;

The comparison operator in JS is "==", so change this line:
if ( x = 1468 )
To this:
if ( x == 1468 )
(as well as the other if-statement).

Custom Exit - Get System Date with user input

I am using a BW query to connect to a BOBJ universe. Some reports from the universe must be scheduled to run for today's date and emailed to a user. Unfortunately, we cannot determine "today" dynamically when scheduling in BOBJ. There will be other reports filtered with a range.
I want to create a BW custom exit variable to allow user input. My idea is to take the user input, like "01/01/1904", and replace the value with today's date.
Is this possible?
Here's example code for what I am trying to achieve.
IF user input = "01/01/1904" then get today's date.
else use the values from the user input.
Scenario 1: user inputs 08/01/2010 - 08/31/2010 the custom exit returns values 08/01/2010 - 08/31/2010
Scenario 2: user inputs 01/01/1904 the custom exit returns 09/03/2010 (today)

Hi,
In your case, i_vnam variable and processing variable for below statement would be same.
LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'variable name'.
Please see the below article for reference.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20f119d9-922d-2c10-88af-8c016638bd90?quicklink=index&overridelayout=true

Need help creating a voice chat application with java

Hi, all:
I'm currently using MSN messenger to talk to my friends online. However, the quality gets pretty low sometimes since MSN is a centralized service. So I was wondering if I know a friend well, and he gives me his IP, would it be better for me to just write a simple java app that captures audio from a microphone and send it over through a socket. Once the byte stream gets there, his side of the app can play it back. Of course, the packets I'm sending and receiving will just be normal TCP/IP packets, but we wouldn't have to go through a MSN messenger server, so would the audio quality be better in this case?

Maybe, but there is probibly other software you can use for direct connections. I would try these first.

Need help in laoding flat file data, which has \r at the end of a string

Hi There,
Need help in loading flat file data, which has \r at the end of a string.
I have a flat file with three columns. In the data, at the end of second column it has \r. So because of this the control is going to the beginning of next line. And the rest of the line is loading into the next line.
Can someone pls help me to remove escape character \r from the data?
thanks,
rag

Have you looked into the sed linux command? here are some details:
When working with txt files or with the shell in general it is sometimes necessary to replace certain chars in existing files. In that cases sed can come in handy:
1 sed -i 's/foo/bar/g' FILENAME
The -i option makes sure that the changes are saved in the new file – in case you are not sure that sed will work as you expect it you should use it without the option but provide an output filename. The s is for search, the foo is the pattern you are searching the file for, bar is the replacement string and the g flag makes sure that all hits on each line are replaced, not just the first one.
If you have to replace special characters like a dot or a comma, they have to be entered with a backslash to make clear that you mean the chars, not some control command:
1 sed -i 's/./,/g' *txt
Sed should be available on every standard installation of any distribution. At lesat on Fedora it is even required by core system parts like udev.
If this helps, mark as correct or helpful.

Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c

Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c. I need assistance on connecting these together so I can run a report. I am not an IT person so if someone could dumb it down it would be great.
Thanks,
NBGHealth

Hello,
I assume GBS Agency Expert 6.7.6c is some sort of database or data source? If you have an ODBC driver then create or use a System DSN to the database. Then you can create a report using that DSN.
Otherwise I suggest you contact the makers of GBS Agency Expert 6.7.6c and ask them how to connect to the database.
Let them know CR is ANSII 92 ODBC 3 compliant.
Thank you
Don

Need help! Can't validate date overlaps for a tabular column

Hello all,
The validation I created to validate whether new or updates rows does not overlap with any records in the table isn't working.
The columns are StartDt and EndDt
Validation Type: NOT EXISTS
Validation expresion:
select 1
    from sample S
    WHERE S.STARTDT BETWEEN :STARTDT AND :ENDDT
OR(S.ENDDT BETWEEN :STARTDT AND :ENDDT)
or (S.STARTDT <= :STARTDT and S.ENDDT >= :ENDDT)
or (:STARTDT <= S.STARTDT and :ENDDT >= S.ENDDT)
Error Message:
Times overlap
When Buttons pressed
-Select Button-
The validation works if a new row or updated row overlaps any existing start and end date records but it doesn't work if I update startdate and end date rows that doesn't overlap existing date times
Example:
TABLE DISPLAYS THE FOLLOWING RECORDS
NAME                   START DATE                      END DATE
TEST                    1/1/2012                               12/31/2012
If I update the rows to the following values, I receive an error message (although those values don't overlap any records in the table)
NAME                   START DATE                      END DATE
TEST                    6/1/2012                               10/30/2012
Any ideas? Do I need to change my code?
Click the link to view the answer to this question. Need help! Can't validate date overlaps for a tabular column
Message was edited by: CharlieMack

Logic for date range overlap testing only requires two conditions in the WHERE clause:
ORACLE-BASE - Overlapping Date Ranges
WHERE S.STARTDT <= :ENDDT AND S.ENDDT >= :STARTDT -- TRUE for ranges that overlap
It looks a little odd, but, if you scribble out a 'logic table', it makes sense.
Condition
A.start <= B.end
A.end >= B.start
A__A B--B
true
false
A__B=A--B
true
true
A__B==B__A
true
true
B--A==B__A
true
true
B--B A__A
false
true
MK

Uber Noob Needs Help Creating website!

I need help creating my webpage: It has a textbox on it were
the user enters a URL and it then redirects the end user to that
URL when they press the GO Button. It also has a check box saying
"Hide my IP", If the end user clicks this box and then clicks go
they will be directed to the website they stateted in the Textbox
but this time it shall mask there IP Address so they can bypass
proxys and surf anonomosly. Please can someone give me some HTML
code i could use for this site or a Link to a website that can give
me the code.

I assume the application is connecting to Oracle using an application ID/password. If so, check to see if that user has a private synonyn to the table. If so drop it since you have a public synonym.
Verify that the public synonym is in fact correct. Drop and recreate the public synonym if you cannot select against the synonym name using an ID that can perform select * from inhouse.icltm where rownum = 1. That is if this other user cannot issue select * from icltm where rownum = 1 without an error.
Check that the application ID has the necessary object privileges on the table.
Queries you need
select * from dba_synonyms
where table_owner = 'INHOUSE'
and table_name = 'ICLTM'
You may find both public and private synonms. Either fix or delete. (Some may reference someelses.icltm table if one exists)
select * from dba_tab_privs
where table_name = 'ICLTM'
and owner = 'INHOUSE'
Note - it is possible to create mixed case or lower case object names in Oracle by using double quotes around the name. Do not do this, but do look to see that this was not done.
You could also query dba_objects for all object types that have the object_name = 'ICLTM'
HTH -- Mark D Powell --

Is Flash CS6 download still available to CC subscribers? I need to create a SWF to work with AS2.

Is Flash CS6 download still available to CC subscribers?
I need to create a SWF to work with AS2.

Get CS6 Apps from Cloud Subscription:
Download previous versions of Adobe Creative applications -
http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html

Adobe form created in LiveCycle does not remember user input

Adobe form created in LiveCycle does not remember user input when the file has been re-opened after it has been saved.
Example:
"Check box" that has been selected and who have registered Action script (may be that it should be disabled), seems to be reset when the file is re-opened, although it apparently is checked.
Are there settings or script that can prevent this?

Hi there,
usually if the values are not kept in form after saving and re-opening the form, it would be because of your code... or because it is not Reader Extended PDF...
If your code has a function which is to return a value to your field without it to be working based on your Design, it will reset any data..(variables)
Which means...
e.g.: You have an array/var/JSONobject which you populate varying on the data entered in the design, as long as you are in the actual form, without closing and re-opening the form, it will keep all values inside that array / variables / JSONobject. But, once the form closed and re-opened, if you have a function that returns a value to your field, whatever the field, from any variable in the script it will return nothing because every variables are reset. To avoid such a thing, you must repopulate all variables that were assigned previously before closing the PDF Form. To do so, I recommend to have a page(hidden) which contains every important values according to that function and you must repopulate those variables according to the values in the keepVar page...
If you do not have any function that returns a value to a field based on your variables, this is not the solution you are looking for and I am not aware of the reason why it behaves like this... Maybe more information on the behaviour of your form would help locate the issue...
Hope this help

Script to delete files created on a specific date with sepecific name

Hi,
Is it possible to help me with a powershell script that delete files under a folder and subfolders that have the following attributes
1. have the name (default.*) and (index.*)
2. created on a specific date say 1-9-2014
3. created between specific time say between 10:00 - 16:00
Thanks in advance!

break out the components of the script.
IE does this match
Get-ChildItem -Recurse c:\temp\*.*or Get-ChildItem -Recurse c:\temp\*.* | Where-Object {$_.CreationTime -gt (get-date "01-09-2014 10:00AM") -and $_.
CreationTime -lt (get-date "01-09-2014 14:00PM")}Get-ChildItem -Recurse c:\temp\*.* | Where-Object {$_.CreationTime -gt (get-date "01-09-2014 10:00AM") -and $_.
CreationTime -lt (get-date "01-09-2014 14:00PM")} | Where-Object {$_.name -match "default"}Might not be working as it might not be matching.Once you get it matching the remove-item will work.
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Need Help on using CAS Incremental Crawl with JDBC data source

Hi,
As part of one of the e-commerce implementations, we are implementing a delta pipeline which reads the data from the database views. We plan to crawl the data with the help of CAS JDBC data source. In order to optimize the data reads, we want to use the CAS capabilities of incremental crawl. We rely on CAS to be able to identify the updates available in the subsequent incremental crawl and only read the updated data for any given crawl unless we force a full crawl.
We have tried implementing the above setup using JDBC data source. CAS reads from the database and stores it in the record store. The Full crawl works fine however; we observed some unexpected behavior during the incremental crawl run. Even when there is no change in the database, crawl metrics show that certain number of records have been updated in the record store and the number of updates differ in every subsequent run.
Any pointers what can be the issue ? Does CAS has the incremental crawl capability using JDBC data source ?
Regards,
Nitin Malhotra

Hi Ravi,
Generic Extraction is used to extract data from COPA tables. And delta method used to extract delta records (records created after initilization) is timestamp.
What is this timestamp?
Assume that, you have posted 10 records one after the other to the COPA tables. And we do initilization to move all these 10 records to BW system. Later another 5 records are added to COPA tables. How do you think the system identifies these new 5 records (delta records).?
It identifies based on a timestamp field (eg : Document created on ,a 16 digit decimal field).
Assume that, in our previous initilzation, say "document created on" field for the last (or the latest) record is 14/11/2006, 18.00 hrs. and timestamp is set to the 14/11/2006, 18.00hrs. then when you do delta update, the system treats all the records with "document created on" field is greater than 14/11/2006, 18.00 hrs as delta records. This is how new 5 records are extracted to bw system and timestamp is again set to the new value besed in field in the records.(say 14/11/2006, 20.00hrs)
Assume that, you have two records with "document created on" field as 14/11/2006, 17.55hrs and 14/11/2006, 17.57hrs. and they were updated to the COPA table after 14/11/2006,20.00hrs (at this time last delta load is done) due to some reason. How can you bring these two records? For this, purpose we can reset the timestamp at KEB5. In this eg, we can reset as 14/11/2006, 17.50 hrs) and do the delta again. So, the system picks all the records which are posted after 14/11/2006,17.50hrs again. But remember that, doing this, you sending some of the records again (duplicate records). So, make sure that you sending ODS object. otherwise you end up with inconsistant data due to duplicate records.
Hope this helps!!
Vj

Need help creating a simple form in Dreamweaver CS3!!

I'm trying to create a form in Dreamweaver CS3, and while I have the form built I'm confused as to how to make it actually function. What I'm trying to do is create a form that when the visitor clicks submit, the data is emailed to me. Can someone help me figure out how to accomplish this?
Thanks so much!

Ute's answer is spot on - you need a FormMail script to process the form. Check with your host (or via the control panel) and see if they supply such a form for free.
If not, google for "formail script' and you'll find quite a few available - all free to use.
You just need to add a couple of lines to your html code, change a few things in the formmail script and the form will process. Sounds complicated but most scripts come with a help file to help you get off the ground.
Nadia
Adobe® Community Expert : Dreamweaver
http://www.perrelink.com.au
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
http://csstemplates.com.au/
http://twitter.com/nadiap

Help Creating Dynamic Stacked Column Chart with Multiple Criteria

Hi all. Im new here and hoping you can help. I have a dashboard Im trying to rebuild from scratch (our computer had a meltdown and we lost all our files). I did not build the dashboard initially so Im trying to recreate it from the flash file we were able to recover. I have come across a chart that I just cannot figure out how to do. I can figure out how to write an array in the Excel sheet that pulls the data into a table the way I need it to be but found out after I wrote that that Xcelcius doesn't support arrays so all my data disappears when I go into preview mode (which is especially frustrating since I can see the chart working fine in design mode). Anyway this is what the data table looks like
Month         Year            Company      Positive #          Negative #         Neutral #          Positive %       Negative %      Neutral %
October      2011            CompanyA      1234                1234                 1234                 10                    10                    10
October      2011            CompanyB      1234                1234                 1234                 10                    10                    10
October      2011            CompanyC      1234                1234                 1234                 10                    10                    10
October      2011            CompanyD      1234                1234                 1234                 10                    10                    10
November 2011            CompanyA      1234                1234                 1234                 10                    10                    10
November 2011            CompanyB      1234                1234                 1234                 10                    10                    10
November 2011            CompanyC      1234                1234                 1234                 10                    10                    10
November 2011            CompanyD      1234                1234                 1234                 10                    10                    10
December 2011            CompanyA      1234                1234                 1234                 10                    10                    10
December 2011            CompanyB      1234                1234                 1234                 10                    10                    10
December 2011            CompanyC      1234                1234                 1234                 10                    10                    10
December 2011            CompanyD      1234                1234                 1234                 10                    10                    10
The original chart was built so that you would choose the month from a combo box and then the company names would show up along the X axis with their % amounts shown in the stacked column. I know how to make a combo box work and I know how to make a stacked column chart work with static data. I cannot for the life of me figure out how to get it to work so that when you choose the month from the combo box it filters the data. I've tried filtered rows but I'm just missing some information that makes it work and I can't figure out what that information is. It has to be able to get the month/year combo from the combo box and then go to the table, filter it by month and year and then create a multi-row table of data with just the company and the percent values. Any help would be greatly appreciated!

Which connection you are using?
IF quite difficult if you are working under static data.

Gurus...Need help....extract data from BKPF header table and BSEG line item

Gurus,
I have to write the logic to fetch data from bkpf and bseg. Need help on how can i do that..
I have to get bukrs belnr gjahr ldgrp from BKPF for a given date and company code. For all these documents, then i have to get the line items from BSEG if the ldgrp is I1 or SPACE.
If the ldgrp is not I1 or SPACE then i have to fetch the records from BSEG_ADD and then generate a ALV report with all the data including the data that was fetched from BKPF.
So, it wil be a combined ALV report that displays header as well as LINE item data together...
Can u please help me with the code...I am not sure how can everything go all together in one internal table....Becoz once its there in one table then only a ALV list can be generated.......
Cheers:
Sam

hi Sam, this may be of some similar thing.
Use this program, I got this prog from a source and we added a small conditional check in the program which checks document numbers in BSEG and also comapres in BKPF and sees if the output from BSEG falls under the posting data range specified in the initial selection.
Now just so you know, this output is kinda messed up, so you will have to play with it in Excel to extract the document numbers, if that is what you want.
============================
PROGRAM....... ZFI_BSEG_DOWNLOAD
TITLE......... Download BSEG
PROGRAM TYPE.. Download
======================================================================
GENERAL DOCUMENTATION AND COMMENTS
<...>
======================================================================
ASSOCIATED PROGRAMS
<Program>..... <Description>
======================================================================
CHANGE HISTORY
Date By Ticket Description
REPORT zfi_bseg_download.
TABLES: bseg, bkpf.
TYPES: BEGIN OF ty_output,
line(6000) TYPE c,
END OF ty_output.
TYPES: ty_tab_output TYPE TABLE OF ty_output,
ty_tab_nametab TYPE TABLE OF x031l.
CONSTANTS: c_delimiter(04) TYPE c VALUE '"%%"',
c_records TYPE i VALUE 10000.
SELECTION-SCREEN
SELECT-OPTIONS: p_bukrs FOR bseg-bukrs,
p_belnr FOR bseg-belnr,
p_buzei FOR bseg-buzei,
p_gjahr FOR bseg-gjahr,
p_budat for bkpf-budat.
SELECTION-SCREEN SKIP.
PARAMETERS: p_file LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN SKIP.
PARAMETERS: p_append AS CHECKBOX DEFAULT 'X'.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM get_records.
*& Form get_records
FORM get_records.
DATA: l_cursor TYPE cursor,
lt_bseg TYPE TABLE OF bseg,
ls_bseg LIKE LINE OF lt_bseg,
lt_output TYPE ty_tab_output,
ls_output LIKE LINE OF lt_output,
lt_nametab TYPE ty_tab_nametab,
ls_nametab LIKE LINE OF lt_nametab,
l_field(30) TYPE c,
l_output(50) TYPE c,
l_date(10) TYPE c,
l_len TYPE i.
FIELD-SYMBOLS: <field>.
IF p_append NE space.
OPEN DATASET p_file FOR APPENDING IN TEXT MODE.
ELSE.
OPEN DATASET p_file FOR OUTPUT IN TEXT MODE.
ENDIF.
Retrieve BSEF fieldnames and data types
PERFORM get_fields CHANGING lt_nametab.
OPEN CURSOR l_cursor FOR
SELECT * FROM bseg
WHERE bukrs IN p_bukrs
AND belnr IN p_belnr
AND buzei IN p_buzei
AND gjahr IN p_gjahr.
Write out fieldnames
IF p_append IS INITIAL.
LOOP AT lt_nametab INTO ls_nametab.
CONCATENATE ls_output ls_nametab-fieldname
INTO ls_output SEPARATED BY c_delimiter.
ENDLOOP.
IF ls_output+0(4) = c_delimiter.
SHIFT ls_output LEFT BY 4 PLACES.
ENDIF.
l_len = strlen( ls_output ).
TRANSFER ls_output TO p_file LENGTH l_len.
ENDIF.
Process BSEG records
DO.
CLEAR lt_bseg.
FETCH NEXT CURSOR l_cursor
INTO TABLE lt_bseg
PACKAGE SIZE c_records.
IF sy-subrc 0.
EXIT.
ENDIF.
LOOP AT lt_bseg INTO ls_bseg.
SELECT single * FROM BKPF
WHERE BUKRS = ls_bseg-BUKRS
AND BELNR = ls_bseg-BELNR
AND GJAHR = ls_bseg-GJAHR
AND BUDAT in p_budat.
if syst-subrc 0.
continue.
endif.
CLEAR ls_output.
Process individual fields of BSEG record
LOOP AT lt_nametab INTO ls_nametab.
CONCATENATE 'LS_BSEG-' ls_nametab-fieldname INTO l_field.
ASSIGN (l_field) TO <field>.
CLEAR l_output.
Process by field data types
CASE ls_nametab-exid.
WHEN 'C' OR 'N' OR 'I'.
Character, Numeric & Integer
l_output = <field>.
WHEN 'D'.
Dates
WRITE <field> TO l_date DD/MM/YYYY.
l_output = l_date.
WHEN 'P'.
Packed decimals
WRITE <field> TO l_output.
WHEN OTHERS.
MESSAGE a000(zs) WITH 'Data type error - ' ls_nametab-exid.
ENDCASE.
SHIFT l_output LEFT DELETING LEADING space.
CONCATENATE ls_output l_output
INTO ls_output SEPARATED BY c_delimiter.
ENDLOOP.
IF ls_output+0(4) = c_delimiter.
SHIFT ls_output LEFT BY 4 PLACES.
ENDIF.
l_len = strlen( ls_output ).
TRANSFER ls_output TO p_file LENGTH l_len.
ENDLOOP.
IF sy-subrc = 0.
ENDIF.
ENDDO.
CLOSE CURSOR l_cursor.
CLOSE DATASET p_file.
ENDFORM. " get_records
*& Form get_fields
FORM get_fields CHANGING pt_nametab TYPE ty_tab_nametab.
CALL FUNCTION 'RFC_GET_NAMETAB'
EXPORTING
tabname = 'BSEG'
TABLES
nametab = pt_nametab
EXCEPTIONS
table_not_active = 1
OTHERS = 2.
IF sy-subrc 0.
ENDIF.
ENDFORM. " get_fields
hope this helps.
cheers,
Hema.

Need help creating script to clear data with user inputs

Similar Messages

Maybe you are looking for