Need Help - Error Code : 0x800F0922 I cannot Activate my IIS InetPub

Hi All Windows Expert;
Need your kind help.
When I activate my webservice IIS, it prompt me an error 0x800F0922 and the Installation of the InetPub will not continue.Hoping for your kind help because I need to run my IIS webservice.
I tried whatever on the internet already but still no result

Hi,
Try tcode RSKC perform the tests for the characteristics mentioned by you. Execute and correct errors if any and then try loading data.
you can also go for error handling option in infopackage that the load should not fail if x number of errors should only fail when the records exceeds the number x.
Thus it will ignore the number of records you give in error handling
Thanks
Puneet
Edited by: Puneet Chawla on Jan 17, 2008 9:18 AM

Similar Messages

Need help - Error Code "2SVM/1/2: CPU BO VOLTS"

Hello,
My older PowerMac G5 Quad (Late 2005 model) has issue - CPU funs are spinning very fast.
Checked with Hradware Test.
It saysError Code: 2SVM/1/2: CPU BO VOLTS
Also LED #2 and #7 are RED.
Please help to identify the problem.
Thank you,
Taras Pelekh

Tarasik,
The most helpful information in those posts is staring you in the face in the very first link: it's quite possible—even probable—that you are running the wrong version of AHT (Apple Hardware Test).
Are you 100% certain you're using the version of AHT that came with your particular machine? AHT is highly machine-specific and you cannot use a version that came with the install media for another Mac.
I also suspect that another, very important clue is contained in the last version of BDAqua's first post.

TS3694 Has anyone ever had an error code -1202? Cannot find any info on it, please help

Has anyone ever had an error code -1202? Cannot find any info on it, please help

Have you looked at the previous discussions on the right side of this page under the heading "More Like This"?

Error when ESR starts - Cannot activate endpoint for message-driven bean

Hi, as already posted on ERROR WHEN START ESR: Cannot activate endpoint for message-driven bean
after an upgrade to PI 7.1 SP11, we got the following error when trying to start ESR, other applications work well:
Application cannot be started!
Details: com.sap.engine.services.deploy.container.DeploymentException: Cannot activate endpoint for message-driven bean sap.com/com.sap.xi.repositoryxml|com.sap.xpi.ibrep.server.jarxml|WorkspaceSyncMessageReciverMDB
     at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:893)
     at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl.prepareStart(ContainerInterfaceImpl.java:425)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:219)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:179)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:419)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:498)
     at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:554)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3422)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3408)
     at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.startApplicationAndWait(DeployCommunicatorImpl.java:749)
     at com.sap.engine.services.servlets_jsp.server.deploy.impl.ApplicationManager.start(ApplicationManager.java:180)
     at com.sap.engine.services.servlets_jsp.server.deploy.impl.ApplicationManager.analyseAppStatusMode(ApplicationManager.java:288)
     at com.sap.engine.services.servlets_jsp.server.DeployContext.startLazyApplication(DeployContext.java:334)
     at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:103)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:295)
     at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:250)
Caused by: com.sap.engine.services.ejb3.container.ActionException: Cannot activate endpoint for message-driven bean sap.com/com.sap.xi.repositoryxml|com.sap.xpi.ibrep.server.jarxml|WorkspaceSyncMessageReciverMDB
     at com.sap.engine.services.ejb3.runtime.impl.Actions_MDBEndpointActivation.perform(Actions_MDBEndpointActivation.java:103)
     at com.sap.engine.services.ejb3.container.CompositeAction.perform(CompositeAction.java:81)
     at com.sap.engine.services.ejb3.container.ApplicationStarter.perform(ApplicationStarter.java:59)
     at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:887)
     ... 34 more
Caused by: javax.resource.NotSupportedException: javax.resource.spi.UnavailableException: Could not activate endpoint for the configured number of attempts
     at com.sap.jms.resourceadapter.ResourceAdapterImpl.endpointActivation(ResourceAdapterImpl.java:113)
     at com.sap.engine.services.connector.jca15.EndpointActivationImpl.activateEndpoint(EndpointActivationImpl.java:451)
     at com.sap.engine.services.connector.jca15.EndpointActivationImpl.findResourceAdapterByName(EndpointActivationImpl.java:154)
     at com.sap.engine.services.connector.jca15.EndpointActivationImpl.findAdapter(EndpointActivationImpl.java:85)
     at com.sap.engine.services.connector.jca15.EndpointActivationImpl.activateEndpoint(EndpointActivationImpl.java:58)
     at com.sap.engine.services.ejb3.runtime.impl.Actions_MDBEndpointActivation.perform(Actions_MDBEndpointActivation.java:95)
     ... 37 more
Caused by: javax.resource.spi.UnavailableException: Could not activate endpoint for the configured number of attempts
     at com.sap.jms.resourceadapter.RaActivation.activate(RaActivation.java:161)
     at com.sap.jms.resourceadapter.ResourceAdapterImpl.endpointActivation(ResourceAdapterImpl.java:101)
     ... 42 more
Caused by: javax.resource.spi.UnavailableException: The destination jms/queue/xi/repository/SWCVSync cannot be looked up. Last attempt performed : jms_vendor_queues_global/jms/queue/xi/repository/SWCVSync
     at com.sap.jms.resourceadapter.RaActivation.setupDestination(RaActivation.java:369)
     at com.sap.jms.resourceadapter.RaActivation.activate(RaActivation.java:128)
     ... 43 more
Caused by: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of SWCVSync.
     at com.sap.engine.services.jndi.implserver.ServerContextImpl.lookup(ServerContextImpl.java:584)
     at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:343)
     at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:637)
     at javax.naming.InitialContext.lookup(InitialContext.java:351)
     at javax.naming.InitialContext.lookup(InitialContext.java:351)
     at com.sap.jms.resourceadapter.RaActivation.setupDestination(RaActivation.java:367)
     ... 44 more
Thanks.

Guys,
I have deployed the below components and after this repository could not be started which gives the below error.
1000.7.11.10.18.20130529165100
SAP AG
sap.com
SAP_XIAF
1000.7.11.10.11.20130529165100
SAP AG
sap.com
SAP_XIESR
1000.7.11.10.15.20130529165100
SAP AG
sap.com
SAP_XITOOL
We have the same issue. Still the Restart did not solve ths issue.
Can anybody help? We are not able to start the XI Repository.
Our PI components are as below
com.sap.engine.services.ejb3.runtime.impl.refmatcher.EJBResolvingException: Cannot start applicationsap.com/com.sap.xi.repository; nested exception is: java.rmi.RemoteException: [ERROR
CODE DPL.DS.6125] Error occurred while starting application locally and wait.; nested exception is:
        com.sap.engine.services.deploy.container.DeploymentException: Cannot activate endpoint for message-driven bean sap.com/com.sap.xi.repository*xml|com.sap.xpi.ibrep.server.jar*xm
l|CacheRefreshMDB^M
        at com.sap.engine.services.ejb3.runtime.impl.DefaultContainerRepository.startApp(DefaultContainerRepository.java:315)^M
        at com.sap.engine.services.ejb3.runtime.impl.DefaultContainerRepository.getEnterpriseBeanContainer(DefaultContainerRepository.java:106)^M
        at com.sap.engine.services.ejb3.runtime.impl.DefaultRemoteObjectFactory.resolveReference(DefaultRemoteObjectFactory.java:55)^M
1000.7.11.10.6.20121015232500
SAP AG
sap.com
MESSAGING
Regards
Omkar

Maestro need help also code is 75957252

maestro need help also code is 75957252 for bios password reset
This question was solved.
View Solution.

Try
60635894
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Maestro need help also code is 75957252 for bios password reset

maestro need help also code is 75957252 for bios password reset
This question was solved.
View Solution.

Check your other post. I replied there.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

My iphone wont turn on or restore,HELP error code 1015

My iphone wont turn on or restore,HELP error code 1015

jailbroken? if so we can't help here, try google.

Need help on struts configuration with ColdFusion 10 using IIS

We need help on struts configuration with ColdFusion 10 using IIS.
Earlier we were using ColdFusion 8 with IIS 6 for one of our application. This application internally calls struts. After upgrading to ColdFusion 10 struts calls are not loading. We get 404 error.
In ColdFusion 8 struts were configured using actions extension .do in IIS from this file-
C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll.
But in ColdFusion 10 this file is not present as ColdFusion 10 uses Tomcat in place of Jrun.
Also there is no information in ColdFusion log file.

Duane wrote:
doctormirabilis, Welcome to the discussion area!
1) how can i configure the time capsule in order to operate as a remote base station synchronizing with the relay using the ethernet port?
Configure the Time Capsule to act as a bridge (not distributing IP addresses). Also configure the Time Capsule to create an 802.11n wireless network with a unique network name (SSID). That's it.
2) how can i avoid that my powerbook while accessing my wireless network does connect through the relay station instead of using the time capsule?
Configure the Time Capsule to use a different network name than the WDS link between the 2 AirPort Express (AX). Configure the PowerBook to use the Time Capsule network.
There are 2 pieces of information that you should be aware of...
(1) None of the PowerBooks are capable of 802.11n.
(2) The WDS link cuts your available bandwidth in half. So the wireless link to your neighbor's has a maximum potential of 27 Mbps.
Let's for a minute assume that you have a Mac compatible with 802.11n. In your configuration the time you could take advantage of the 802.11n speed is when the Mac is sending/recieving data directly from/to the Time Capsule.
There would be NO speed increase in Internet access. The speed of Internet access is going to be controlled by the slowest link in the path to the Internet. That is probably the connection to the ISP. The next slowest path is the WDS link to your neighbor's.
Duane,
I am in a similar situation, sharing internet with my neighbor. Do you think it would be plausible to hook up a vonage phone adapter to time capsule's ethernet port if time capsule is bridging from my neighbor's router in the configuration you have described? A check of my upload speed shows 1.67Mbps (powerbookG4 w/ airport extreme). Vonage reccommends 90kbps minimum upload speed. Am I going to lose some speed putting the Vonag adapter behind time capsule?
Thank you

Need help - Error: MDN is not found (code: 33)

Whenever I open my Verizon Cloud it says "Error: MDN is not found (code: 33). I NEED HELP! This phone has to be sent back soon becuase I got a replacment. HELP HELP HELP
I have a galaxy s3
Subject line edited into post.
Message was edited by: Admin Moderator

Make sure both phones (iPhone, Moto X, Droid X, Samsung Galaxy, Nokia, Motorola) are connected to the same wifi .. on the new device you will first have to download and install the updates by going to Settings >> About Device >> Updates. Once the updates have been installed you will not receive the error "MDN is not found (code: 33). You can proceed to pair the devices and transfer your content. It will also give the option to select the type of content (contacts, photos, video) you want to transfer.
Thanks www.strongpurpose.com for helping find this solution .. they made it easy for me to get my content transferred so I can get back to the important stuff .. Follow Your Passion!

Trying to create a Invoice based on Order need help Error -5002

the dreaded -5002 error is haunting me too! and I could not find a matching solution for this in the forum....
I need help quickly on this. I am trying to create invoices for some orders so the Base - Target relationship is retained. The orders I pick are all Open (DocStatus   = O and the lines are all Open LineStatus = O)
here is my code
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 0
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00001"
oInvoice.Lines.ItemDescription = "IBM Infoprint 1312"
'adding Line
oInvoice.Lines.Add
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 1
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00002"
oInvoice.Lines.ItemDescription = "IBM Inforprint 1222"
'adding Line
oInvoice.Lines.Add
lRetCode = oInvoice.Add
If lRetCode <> 0 Then
    gObjCompany.GetLastError lErrCode, sErrMsg
    MsgBox (lErrCode & " " & sErrMsg)
End If

Indika,
Only set your base types...
(not items & description)
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 0
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00001"
oInvoice.Lines.ItemDescription = "IBM Infoprint 1312"
'adding Line (to fill the second item line)
' the 1st line item is there by default
oInvoice.Lines.Add
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 1
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00002"
oInvoice.Lines.ItemDescription = "IBM Inforprint 1222"
'DO NOT Add THIS line
' (only if you want to add a 3rd line item)
'''oInvoice.Lines.Add -> Don't add this
lRetCode = oInvoice.Add
If lRetCode <> 0 Then
    gObjCompany.GetLastError lErrCode, sErrMsg
    MsgBox (lErrCode & " " & sErrMsg)
End If
remember to add :
oInvoice.CardCode = "your BP"
oInvoice.DocDueDate = Now
oInvoiceDoc.CardCode = txtDOCBPCode.Text

Windows 8 fails to install EVERY update, error code 0x800f0922

So I had to do a System Repair thing where Windows would repair itself and removing all my apps but keep my documents, photos and music etc. So I was reinstalling every program again and also wanted to install the updates.
But I ran into 0x800f0922 error code and I couldnt install them. (I run Windows 8.1 Pro) I was trying to install Adobe Photoshop but couldnt continue cuz .NET framework 3.5 was required. But after trying to manually download + install I got
the same error (0x800f0922). I've tried almost every cmd command but couldnt fix it. (im a kinda noob on it anyways)
Any help would be appreciated!

I did that and it told me it succeeded, but I also tried to manually install net framework with DISM but gave me the same error.. And I reinstalled Windows trying the repair, refresh and reset options, nothing helped. I did not yet tried a clean installation.
CBS Log:
https://www.dropbox.com/s/qgzhhmlr0nqd7es/CBS.log
Windows Update Log:
https://www.dropbox.com/s/hpakr5t2290pbpy/WindowsUpdate.log
If the links dont work, try these:
CBS Log:
https://paste.ee/p/6aALS
Windows Update Log:
https://paste.ee/p/KzbIq

Windows error code 0x800f0922

I want to install .net framework but i keep getting the same error code. How do i fix it? I've also tried it by the windows feature on and off, same thing, How do i fix this? Need some help....

Im having the same problem, when i tryed to install Telnet Client using Programs and Features...

SSIS 2008 R2 Excel Destination Error, "An OLE DB error has occurred. Error code: 0x80040E21.", cannot export to the new Excel (.xlsx) format

Hello.
I've been attempting to do a very simple task that just isn't working. For a Data Flow Task action in SSIS, I am trying to export data from a single SQL Server (2008 R2) database table to an Excel spreadsheet (.xlsx). No matter what I do, it
just keeps failing. The columns in the table match the column header names (in the first row) in the tab I select. Here is the output I get.
SSIS package "Package.dtsx" starting.
Information: 0x4004300A at Data Flow Task, SSIS.Pipeline: Validation phase is beginning.
Warning: 0x80049304 at Data Flow Task, SSIS.Pipeline: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator, or on the system's
console.
Information: 0x40043006 at Data Flow Task, SSIS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, SSIS.Pipeline: Pre-Execute phase is beginning.
Error: 0xC0202009 at Data Flow Task, Excel Destination [52]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
Error: 0xC0202025 at Data Flow Task, Excel Destination [52]: Cannot create an OLE DB accessor. Verify that the column metadata is valid.
Error: 0xC004701A at Data Flow Task, SSIS.Pipeline: component "Excel Destination" (52) failed the pre-execute phase and returned error code 0xC0202025.
Information: 0x40043008 at Data Flow Task, SSIS.Pipeline: Post Execute phase is beginning.
Information: 0x4004300B at Data Flow Task, SSIS.Pipeline: "component "Excel Destination" (52)" wrote 0 rows.
Information: 0x40043009 at Data Flow Task, SSIS.Pipeline: Cleanup phase is beginning.
Task failed: Data Flow Task
SSIS package "Package.dtsx" finished: Success.
I kick-off the action and sometimes is hangs for a few seconds (20+ seconds) and sometimes it doesn't, but either way it fails. I tried this on a 32-bit machine, 64-bit machine, and still it fails. I tried an OLE DB connection to Excel and
that doesn't work either. I made sure that the connection string for the Excel spreadsheet is Provider=Microsoft.ACE.OLEDB.12.0;Data Source=[filepath\excelfile].xlsx;Extended Properties="EXCEL 12.0 XML;HDR=YES"; and still it doesn't work.
Now, when I switch it over to export to an Excel 2003 spreadsheet (.xls) it works! But I don't want it to go to the old Excel spreadsheet format, my requirement is to export the data to the new format. Is there a bug in the Access 2010 Database
Engine that won't allow me to export to the new Excel format? Otherwise, what can I be doing wrong? I set the Run64BitRuntime property to False and it still doesn't work.
My solution (so far) is to export it to Excel 2003 and then via the Script Task action use the Excel COM API (Microsoft.Office.Interop.Excel.dll) for 2010, open the file and save it in the new format (.xlsx) and that works great! However, the client
doesn't want to install Excel on the database server! So what can I do when the Excel Destination or OLE DB Destination (to connect to Excel) actions don't work!? Please help!!!
Like I mentioned, if this is a bug, that would be great to know so I can stop wasting my time. Thanks again.

Alright, so you mean to say is that the driver is not installed. Isn't version 12 the 2010 Access Database Engine Driver? I did install that, and I also tried the 2007 Access DB Engine driver, and both don't work. What driver am I missing?
The connection string is correctly formatted, yes?
Also, when setting up the OLE DB Destination action and I have it point to the Excel spreadsheet, and I specify as the provider "Microsoft Office 12.0 Access Database Engine OLE DB Provider" and click on Test Connection, the connection is
successful. Wouldn't that mean the 12.0 version driver is installed?
Thanks in advance.

Help error code 7 opengl crash

I get this when Premiere pro CS5 crashes :
Your hardware configuration does not meet minimum specifications needed to run the application. The application must close. Please visit http://www.nvidia.com/page/support.html for help. Error code: 7
I think its becose of a large image that I am using. But I need it large to zoom out.
Anyone else has that problem? Any fixes?
I have the latest updates and last drivers for my GTX 460

Updates:
Now cuda is not even loading. All projectrs that I open say that the projecgt was last using mercery engine playback (or said differently ) and now it will be without hardware acceleration. So it's as if I dont have a valid GTX card.
I am starting to regret selling my gtx 285 to upgrade with this one. But, might not be a fault in the card. Besides the crash from the large picture (the original problem) Any one has any idea why now Premiere does not detect, or use my card?
Thanks
I need to re-cut a documentary for a festival in April and I am heavy on After effect stuff and plug ins use. I know hardware aceleration does not help with every types of effects but things are not playing smoothly at all. I guess I will have to lower the playback quality but with 24 G of ram, an i7 960 and Asus P6T pro mobo, raid cards... It should be a lot better then it is right now.

Error code: 12017 - I cannot upgrade my software t...

Hello,
I use Nokia Suite 3.2.100 and Nokia E52. Nokia Suite found a newer version of software for my E52. Downloading complete succesfully, creating backup before installing also, than I see - "Preparing for installation" and after few seconds appears a message with na error code: 12017 ("there was a problem with Nokia Suite. Try to do it again later. Reinstall Nokia Suite if problem will show again" - this is my translation from polish language).
I already use this version of Nokia Suite to upgrade my phone software and ther was no problem. I didn't do anything with my laptop since that time. Phone works ok, laptopo also, other functions of Nokia Suite also.
Thanks for help in advance!

Hello,
Sorry for very late response - It was very busy time at work for me...
I prepared a log file for you doing the same things as before but right now I could upgrade my software on E52... Very strange, because I didn't do anything special before last time, apart from Windows updates. I cannot help sending a log file and I'm happy that I finally upgrade my phone software, but in my opinion problem still exist (according to other post on this forum).
I will try to do an upgrade on my other phone Nokia 5230 and see what's happen.
Anyway - thanks a lot for help and your time!
Have a nice X-mas time!

Need Help - Error Code : 0x800F0922 I cannot Activate my IIS InetPub

Similar Messages

Maybe you are looking for