Need help finding a driver for my hp webcam . My computer say I dont have a camera but I do.

Need help finding my camera[webcam] on my computor.

Can you provide us with your computer model number? Take a look in Device Manager to see if there is an Imaging Devices group that includes the webcam. If not, is there an Unknown Device listed? This would indicate that your webcam is detected, but there is no driver installed. We can help you find the correct driver if that is the case. Let's start with the computer model number. Thanks.
I am an HP employee. The opinions expressed are my own and not those of HP.

Similar Messages

Need help finding a driver for our NI A/D board

My A/D board has the following numbers: 70243 and 84-01 and 3199F. Help me find the driver

All of the NI drivers can be located on the NI Drivers and Updates page. In order to find the required driver, you will need to know what the device is called. You can find this information in several different ways. One way is to visually inspect the device. If it is an NI device then it should list the device name somewhere on the board. Also, you could locate the part number. This number usually ends in -01 or -02 and is printed near a bar code. If you can find this number, then simply type it into the search on ni.com to locate the name of the device.
When the name of the device is figured out, you should then determine the appropriate driver for the device from the Drivers and Update page linked above.
If it is not an NI device, then you will want to view the device manufacturer's webpage for available drivers.
Please do not post back to this message as I do not believe the message pertains to the NI Measure software. The question is more related to a specific piece of hardware. Thus, you should repost this question, if another exists, to the appropriate NI Hardware category.
Best of luck.
Jared A

I need help finding the driver for my ethernet.it is a compaq presario sr1403wm with windows xp.

compaq presario sr1403wm
windows xp
my computer dropped the driver for the ethernet card and am unable to do a system restore.

HP Spring 2005 Original Network Adapter Driver Collection
or
SiS900 LAN Driver v1.19
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Need to find a driver for cRIO-9211 thermocouple to be used with LabView

I am using the NI cRIO-9211 Thermocouple input and the NI USB-9162 Hi-Speed USB Carrier and need to find a driver to interface the thermocouple with LabView 8.5.1. Could you point me in the right direction as to where I can download a driver for this?

Hi Durnan,
You will require the DAQmx driver for the USB 9162. This can be found here: ni.com/downloads, see DAQmx 8.8 - would do.
You only require the DAQmx driver, as the C Series modules are supported - they can just be used in a cRIO as well.
Hope this helps,
Kind Regards,
James.
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!

Need to find printer driver for OS 9.0.4 for Epson Stylus NX415

Here's my problem:
I have an old strawberry-colored original iMac, running OS 9.0.4.
I also have an Epson Stylus NX415 all-in-one printer.
But -- the iMac does not recognize the printer.
In order for this printer to connect to this Mac, I need to have a "printer driver" extension that I can install (and then restart), so that the printer appears in the "Chooser" window, so I can select it there.
I'd need either a printer driver specific to the NX415, or some kind of generic Epson printer driver compatible with this specific model.
But here's the problem: I think the NX415 was first manufactured AFTER OSX was introduced, so it could be that Epson never even bothered to make a printer driver for OS 9 for the NX415.
Help!
I've scoured the Internet and legacy sites that specialize in old OS 9 software, and also scoured Epson's site, and could not find any appropriate printer drivers in any of those places.
Any suggestions, or specific links to where I can download such a driver?
Or is it the case that this printer simply physically will NEVER work with this model of Mac, and I should just give up?
Any help would be greatly appreciated.

Hello,
A good guess would be that you are right in that an NX415 driver for Mac OS 9 was not made because of the fact that the printer is much newer than the operating system. It is probably going to be difficult to find a Mac OS 9 driver for another model that will allow any or all parts of the all-in-one printer in question to work properly. However, if you wish to carry out experiments, the Mac OS 8/9 drivers on the Epson support page for CX3200 may be as close as you can get.
Perhaps someone else has a better idea.
Jan

Need to find Wireless Driver for G60-630CA

I just downgraded this laptop to XP and I'm missing the network controller which I guess is the wireless driver. No luck finding it any where. Can somebody help?
This question was solved.
View Solution.

Atheros Wireless LAN Driver for Microsoft Windows XP
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-785...
Type: Driver Version: 3.00 (3 Dec 2009)
Operating System(s): Microsoft Windows XP
File name: sp46630.exe (21 MB)
DEVICES SUPPORTED:
Atheros AR9285 802.11b/g/n WiFi Adapter
Atheros AR5009 802.11a/g/n WiFi Adapter
Atheros AR5006 802.11a/b/g WiFi Adapter
Atheros AR5007 802.11b/g WiFi Adapter
DriverVer = 09/30/2009,7.7.0.406
[Atheros]
%ATHER.DeviceDesc.30A1% = ATHER_DEV_30A1.ndi, PCI\VEN_168C&DEV_002B&SUBSYS_303F103C
%ATHER.DeviceDesc.30A1% = ATHER_DEV_30A1.ndi, PCI\VEN_168C&DEV_002B&SUBSYS_3040103C
%ATHER.DeviceDesc.30AB% = ATHER_DEV_30AB.ndi, PCI\VEN_168C&DEV_002B&SUBSYS_1461103C
[Strings]
ATHER.DeviceDesc.30A1 = "Atheros AR9285 802.11b/g/n WiFi Adapter"
ATHER.DeviceDesc.30AB = "Atheros AR9285 802.11b/g/n WiFi Adapter"

Need Help, Finding a site for uploading swf files

[moved from AS3 forum by moderator - is not an AS3 discussion]
Alright, so I'm kind of new to these forums. I searched them thoroughly several times, but couldn't a find a section for what I exactly needed. I used an older version of Flash and actionscript to make some interactive games and then exported them.
I've found plenty of sites that allow uploading of a variety of files, including flash based ones. The problem is that these sites are either for storage, downloading the file onto one's computer, or that they would have to go to a specific link to play the game.
What I want is to be able to place a file onto an uploading site and be able to embed it (I think that's the word) to my own site/forums. That way the game can be played on a site and or discussion forum, without members having to go to another site or downloading the game.
What file uploading site would you recommend for this? I've already tried several, but they don't allow embedding files. I would prefer for the site to be free, as I don't have enough files to make it worth paying a monthly fee.
Thanks in advance for any replies/information!

Yes, why not upload it to your own website. Most of sites are not support swf file, but support flv file. To upload swf to your website you can use the code like
<object width="300" height="300">
<param name="movie" value="flashmovie.swf">
<embed src="flashmovie.swf" width="300" height="300">
</embed>
</object>
If you really need to upload swf to other websites, I think you need to convert your video but that will not a game. But maybe you can try to find some flash game websites.

Hi: I have had itunes for ages and 2 wks ago says i dont have enough access privileges

I do have privileges is run as admin as has been for years on various laptops have unstalled and reinstalled twice. quicktimes will open but not itunes.

Is this what you downloaded: iTunes 10.7?
When the update fails what if any error report do you get, specifically? Please do this before trying again:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Need help finding proper page for Extending OA Framework

I am using OAF 11.5.10 CU2. We have a requirement to modify the table that shows on the OTL timecard notification. This is what shows when u go to the "Worklist Timecard Approval" responsibility and select the notification with type of "OTL Workflows for Employees". The table contains project number, we want to change that to project name. We also need to add a custom comments field.
When I go thru the "Extending OA Framework Applications" documentation it shows me how to find the page to export from the MDS repository. However, when I do that it doesn't contain the Timecard Entries table as expected. The page I exported was /oracle/apps/fnd/wf/worklist/webui/NotifDetailsPG, as the "About this Page" shows.
Please help me find the proper xml page to extend for this requirement.

t looks like it does creates the web bean dynamically. This is the controller code that gets fired when the details button is selected, which is the timecard details.
if(s9.equals("Detail"))
oapagecontext.removeSessionValue("TimecardBlockCount");
oapagecontext.removeSessionValue("TimecardAttributeCount");
flag = false;
GlobalUtilities.putSessionValue(oapagecontext, "FOOTER", "detail");
oapagecontext.putSessionValue("TimecardMode", "TIMECARD-REVIEW");
oawebbean.addIndexedChild(createWebBean(oapagecontext, oawebbean, "Hxctimecard"));
So How would I know how to find this web bean to make the changes?

Need help in installing driver for my X-Fi Go!

? It've been very frustrating to keep trying to install the drivers for my X-Fi Go!
I've tried the beta driver,the stable release driver,all to no avail.
Errors during installation.
One of such - > http://img94.imageshack.us/img94/935/asdel.jpg
And
The very famous,Error I-00,which have yet to be resolved.
I've tried what it takes to somehow bypass this I-00 error but to no avail.
Using Windows 7 Ultimate 64-bits here,used to be able to install the drivers in Windows XP x86.
I seriously need my sound driver to be installed.
Appreciated anyone's effort in helping.
It would be best if one of the Creative's staffs approaches me.
This's definitely getting up my nerves.

Well surprisingly,i've managed to install the driver without any problems upon following your given instructions.
But sadly,soon after i was greeted with errors after launching both the 'Console Launcher' and 'Audio Control Panel'.
Errors as shown below,respecti'vely.
http://yfrog.com/5fsadasdnxj
http://yfrog.com/5f2asdj
Hopefully you could provide me with an solution again.
Cheers.

Need help finding my serial # for photo shop elements 12

Have photo shop elements and can't seem to find where I can get my serial number so I might download the program. I'm beginning to think I,m dumb, I follow the instructions but the only number I have is the redemption code. Can anyone help with a simple solution that I can follow. Thanks in advance. Also the program I have is elements 12 but the disk information says i have elements 11?
Bill

Hello John, thanks for reply but it doesent help. It is instructions on how get my serial number but does not show me where this page is so I might imput my redemption code. I've used those instrucrions 50 times or so but never get to the acctual imput screen Should I return this product. I've played with the adobe site everyday since 9/23/14. This will be my last try. I would love to have the name and e-mail of someone I might complane to.
Hope you can help
Bill

Need Help finding mini bridge for PS CC Program window

I am still learning PS. I have PS & LR CC. I recently purchased Photobacks backgrounds and Templates, and Mini-Bridge looks extremely helpful in their tutorial video. What exatly is it and HOW can i get it on my PS Window? Thanks

As of CC, it no longer exists. Adobe pulled it. Sorry.
You can however, keep Bridge running (which it would have been for mini bridge to work) Then Double click on the thumbnail or drag the thumbnail to photoshop. It doesn't really take any longer to do it just does not stay in front any more.
Idea for Adobe -
Though In windows, Adobe could force bridge to stay in front if they decide to add that option. Not sure if Mac has a similar feature.

I need help getting a driver for augidy

i cannot download the driver from the site because i think it maybe down could i please get help from a tech officer?

Hi Jallen,
To do this you are going to have to create DLL calls within LabVIEW. I have attached a document that will help you get started with creating your DLL calls. This will enable you to communicate with your camera.
http://digital.ni.com/public.nsf/allkb/DCB90714981A1F148625731E00797C33
Regards,
Marcus
Marcus M.
PXI Product Support Engineer
National Instruments

Need help getting Mac driver for HP PSC 1510 that works on XP networked printer

My goal is to use a Mac OS X 10.5 laptop and use a Windows XP networked printer - an HP PSC 1510. So far I have failed.
I downloaded a driver update 1.1.1 from Mac which has version 4.03 of the HP PSC 1500 series family of drivers. However, the documentation states that it is not one that will work with an IP or XP connected printer. The earlier driver that came with Mac OS X 10.5 documentation also says that it will not work with an IP or XP connected printer. This explained why the Mac versions of the HP software applications could not see my printer. I had also tried using the default Postscript generic option presented when I was setting up the network printer on the Mac. My one graphic page printed as ten or twelve text pages of nonsense characters so that was also a failure.
So I have my shared HP PSC 1510 wired (connected) off my Windows XP desktop and shared on my home network. I really want to be able to print to the HP PSC 1510 from my wireless Mac laptop especially now that I am partially disabled and getting up and to the PC printer is painful.
If anyone knows how to make this work properly, or even an acceptable workaround, I would be ever so grateful.

Hey , Welcome to the HP Support Forums!
I understand that you're looking for a driver that would allow your HP PSC 750 All-in-One Printer to function for printing and scanning on your Mac OS X 10.10 Computer. I would like to assist you with this today. I am happy to report that the HP printing and scanning driver is offered for your specific model of PSC printer for the newer Mac Operating Systems. Please click here to download the basic print and scan driver. According the the driver page (found here) this driver offers basic scan and print capabilities for Mac OS X 9.1 to Mac OS X 9.2.2, and Mac OS X 10.1.x to Mac OS X 10.2.4 and higher. Once the driver is downloaded please follow the onscreen prompts to complete the installation. Once the installation has completed successfully please test printing and scanning to confirm that your product is functioning as per normal. Please respond to this post with the result of your installation. I look forward to hearing from you. Best of luck!

Need help finding audio plugin for 6.5

I often edit tapes where I need to combine the left and right audio signals into one mono signal. Currently, I duplicate the audio onto two lines of the timeline, and then set one to "duplicate left" and the other to "duplicate right." Does anyone make a plugin that would combine the two audio channels to mono without my having to go through this process?
J. D.

t looks like it does creates the web bean dynamically. This is the controller code that gets fired when the details button is selected, which is the timecard details.
if(s9.equals("Detail"))
oapagecontext.removeSessionValue("TimecardBlockCount");
oapagecontext.removeSessionValue("TimecardAttributeCount");
flag = false;
GlobalUtilities.putSessionValue(oapagecontext, "FOOTER", "detail");
oapagecontext.putSessionValue("TimecardMode", "TIMECARD-REVIEW");
oawebbean.addIndexedChild(createWebBean(oapagecontext, oawebbean, "Hxctimecard"));
So How would I know how to find this web bean to make the changes?

Need help finding a driver for my hp webcam . My computer say I dont have a camera but I do.

Similar Messages

Maybe you are looking for