Need help in ABAP code to Enhance the Extract Structure ?????

Hi all,
I want to enhance the extract structure to get KBETR & KBRUE fields of KONP table since it didnt allow me to add those fields while creating the generic extractor because of currency key problems. I want to read all KONP records into internal table with KNUMH (Key). Next, I want to fill them into ZZKBETR & ZZKBRUE of Extract Structure ZOXUR40065 in loop.
DATA:
i_t_zrebate like ZOXUR40065 occurs 0 with header line,
reb_tabix like sy-tabix.
TABLES: KONP.
Could you please help me in completing the ABAP code?
Thanks,
Venkat.

Hello Manga,
 I have included the following code in ZXRSAU01:
WHEN 'ZREBATE'.
PERFORM ZREBATE_EXIT TABLES C_T_DATA.
After Double click on ZREBATE_EXIT on perform statement, it created ZXRSAF01 include and the following code is added in it:
FORM ZREBATE_EXIT TABLES FP_C_T_DATA STRUCTURE ZOXUR40065.
DATA:
i_t_zrebate like ZOXUR40065 occurs 0 with header line,
reb_tabix like sy-tabix.
FIELD-SYMBOLS: <l_c_t_data> TYPE ZOXUR40065.
LOOP AT fp_c_t_data ASSIGNING <l_c_t_data>.
reb_tabix = sy-tabix.
select single KBETR KBRUE
into (<l_c_t_data>-ZZKBETR,
<l_c_t_data>-ZZKBRUE,
from KONP
where KNUMH eq <l_c_t_data>-KNUMH.
if sy-subrc eq 0.
MODIFY fp_c_t_data FROM <l_c_t_data> INDEX reb_tabix.
endif.
CLEAR:reb_tabix.
ENDLOOP.
ENDFORM.
When I tried to Activate this ZXRSAF01 include, it fails with 'The FORM "ZREBATE_EXIT" does not exist'.
Should it be FP_C_T or P_C_T? I found P_C_T in ZXRSAF01 include.
What is wrong with it, please ?
 Can't I add this whole code in main include ZXRSAU01itself?
The Extractor ZREBATE is based on KONA, KONH & KONP tables. This Extractor and KONA table have the same 4000 records and KONP has 13000 records. I want to extract KBERT & KBRUE from KONP.
 Thanks in advance.
Regards,
Venkat

Similar Messages

Enhancing the extract structure for 0FI_GL_4, 0FI_AP_4, 0FI_AR_4

Hi all,
 Does anyone know how to enhance the extraction structures with additional fields for datasources 0FI_GL_4 (General ledger: line item), 0FI_AP_4 (vendors: line item) and 0FI_AR_4 (customers: line item).
Thanks,
Sabrina.

Hi
 Here are the two scenario's described in the note:
1. All the fields of the customer enhancement in the customer include are contained in the read structure (see the table above). Then no additional action is required. The fields of the customer enhancement are filled automatically by the datasource from the assigned read structure via "move-corresponding".
Example: The extraction structure DTFIGL_4 for datasource 0FI_GL_4 (General ledger: line item) should be enhanced by the VALUT (value date) field.
 To do this, create structure CI_BSIS in the data dictionary of the R/3 source system and include the VALUT field in it. The data dictionary in the R/3 source system shows that the VALUT field is contained in the read structure of the datasource (table BSIS). For that reason the VALUT field is automatically filled by datasource 0FI_GL_4.
2. Fields of the customer enhancement in the customer include are not contained in the read structure (see the table above). In this case you have to program a function module to fill the field of the customer enhancement. To do this, there is a Business Transaction Event available (open FI interface for process 00005021). Create any function module you like and use function module SAMPLE_PROCESS_00005021 as a template for the interface (input parameter, changing parameter).
 Interface of function module SAMPLE_PROCESS_00005021:
 Input-parameter I_OLTPSOURCE: datasource that is currently extracting data from the R/3 source system.
 Changing-Parameter C_STRUCTURE: Extraction structure of the data source currently extracting including fields from the assigned customer include. When you call this customer defined function module, all the fields of the extract structure are transferred filled.
 Check whether the type pool SBIWA is declared in the TOP include of the function group.
If not, add it with the statement TYPE-POOLS: SBIWA.
 Then maintain table TPS31 with Transaction SM30. Create the following entry:
 PROCS LAND APPLK FUNCT
 00005021 <fname>
 <fname> stands for the customer defined function module.
 By doing so, the function module you defined is called for each extracted record. Note that in this case the performance of the extraction may be reduced significantly regardless of the table read and the complexity of the programmed logic.
 Example:
 You want to enhance the extraction structure DTFIAR_3 for datasource 0FI_AR_4 (customers: line item) by the ORT01 (city) field from the customer master record.
 To do this, create structure CI_BSID in data dictionary of the R/3 source system and include the ORT01 field in that. The data dictionary in the R/3 source system displays that the ORT01 field is NOT contained in the read structure of datasource 0FI_AR_4 (Table BSID).
 Therefore you have to program a function module that reads the customer master in the R/3 system (table KANN1) and fills the ORT01 field of the customer enhancement. In the changing parameter C_STRUCTURE the filled fields of the extraction structure DTFIAR_3 are available to you. With the KUNNR field of extraction structure DTFIAR_3, you can select the respective master data record from table KNA1 and determine field ORT01 of the customer enhancement.
1. All the fields of the customer enhancement in the customer include are contained in the read structure (see the table above).
 Then no additional action is required. The fields of the customer enhancement are filled automatically by the datasource from the assigned read structure via "move-corresponding".
 Example:
 The extraction structure DTFIGL_4 for datasource 0FI_GL_4 (General ledger: line item) should be enhanced by the VALUT (value date) field.
 To do this, create structure CI_BSIS in the data dictionary of the R/3 source system and include the VALUT field in it. The data dictionary in the R/3 source system shows that the VALUT field is contained in the read structure of the datasource (table BSIS). For that reason the VALUT field is automatically filled by datasource 0FI_GL_4.
 ATTENTION:
 By using Note 430303 you can enhance DataSource 0FI_GL_4 by all fields from table BSEG (instead of BSIS); then the fields are filled automatically in the extractor.
1. Fields of the customer enhancement in the customer include are not contained in the read structure (see the table above).
 In this case you have to program a function module to fill the field of the customer enhancement. To do this, there is a Business Transaction Event available (open FI interface for process 00005021). Create any function module you like and use function module SAMPLE_PROCESS_00005021 as a template for the interface (input parameter, changing parameter).
 Interface of function module SAMPLE_PROCESS_00005021:
 Input-parameter I_OLTPSOURCE: datasource that is currently extracting data from the R/3 source system.
 Changing-Parameter C_STRUCTURE: Extraction structure of the data source currently extracting including fields from the assigned customer include. When you call this customer defined function module, all the fields of the extract structure are transferred filled.
 Check whether the type pool SBIWA is declared in the TOP include of the function group.
If not, add it with the statement TYPE-POOLS: SBIWA.
 Then maintain table TPS31 with Transaction SM30. Create the following entry:
 PROCS LAND APPLK FUNCT
 00005021 <fname>
 <fname> stands for the customer defined function module.
 By doing so, the function module you defined is called for each extracted record. Note that in this case the performance of the extraction may be reduced significantly regardless of the table read and the complexity of the programmed logic.
 Example:
 You want to enhance the extraction structure DTFIAR_3 for datasource 0FI_AR_4 (customers: line item) by the ORT01 (city) field from the customer master record.
 To do this, create structure CI_BSID in data dictionary of the R/3 source system and include the ORT01 field in that. The data dictionary in the R/3 source system displays that the ORT01 field is NOT contained in the read structure of datasource 0FI_AR_4 (Table BSID).
 Therefore you have to program a function module that reads the customer master in the R/3 system (table KANN1) and fills the ORT01 field of the customer enhancement. In the changing parameter C_STRUCTURE the filled fields of the extraction structure DTFIAR_3 are available to you. With the KUNNR field of extraction structure DTFIAR_3, you can select the respective master data record from table KNA1 and determine field ORT01 of the customer enhancement.
After you create the customer include in the R/3 source system you have to post process the accompanying datasource with Transaction RSA6. Select the application component according to the above table and change the datasource that fits the customer include. The "Hide fields" flag should be removed in the field list for the fields of the customer include. Then save the field list.
If the fields of the customer include is not displayed in Transaction RSA6, refer to note 415530.
1. After you create the customer include in the R/3 source system you have to post process the accompanying datasource with Transaction RSA6. Select the application component according to the above table and change the datasource that fits the customer include. The "Hide fields" flag should be removed in the field list for the fields of the customer include. Then save the field list.
If the fields of the customer include is not displayed in Transaction RSA6, refer to note 415530.
Please let me know.
Thanks,
Sabrina.

Need ABAP Code to enhance the 0PRODORDER_ATTR?

I want to enhance the datasource 0PRODORDER_ATTR with the below JCDS Table fields like UDATE,STAT,OBJNR,INACT,CHGNR.
Can anyone please let me know the ABAP Code need to be written in the CMOD to populate the data for the above fields in the 0PRODORDER_ATTR?

Hi,
You can use below code to enhancemnt .
You need to change the table, structure and field names
Below code you have to write in tocde CMOD if you are enhancing the master data. It applies for any master data, although, I have taken 0VENDOR_ATTR as the example. I assume that You have already added/appended the fields in the extract structure of 0VENDOR_ATTR i.e. to the structure BIW_LFA1_S. ( Check this link for how to enhance the DataSource : https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0af763b-066e-2910-a784-dc6731660f46 )
We have enhanced the datasorce for the following two fields from table LFA1:
ERDAT- Date on which the Record Was Created
KRAUS - Credit information number.
We have also enhaced the structure for the following fields from table LFB1.
MINDK - Minority Indicators
ZTERM - Terms of payment key
CERDT - Certification date.
Now we will poulate these two fields in the code written in CMOD tcode. Here is the code:
Go to the tcode CMOD in R3 and select the component EXIT_SAPLRSAP_002. Write this code in INCLUDE ZXLOFU01.
data : l_t_data like biw_lfa1_s.
data : l_tabix like sy-tabix.
CASE i_datasource.
WHEN '0VENDOR_ATTR'.
    LOOP AT i_t_data INTO l_t_data.
      l_tabix = sy-tabix.
      CLEAR: l_t_data-yyerdat,
             l_t_data-yykraus.
      SELECT SINGLE erdat kraus FROM lfa1 INTO
          ( l_t_data-yyerdat, l_t_data-yykraus)
            WHERE lifnr EQ l_t_data-lifnr.
      SELECT SINGLE mindk zterm cerdt FROM lfb1 INTO
              (l_t_data-yymindk, l_t_data-yyzterm, l_t_data-yycerdt)
              WHERE lifnr = l_t_data-lifnr.
      MODIFY i_t_data FROM l_t_data INDEX l_tabix.
      CLEAR: l_t_data, l_tabix.
    ENDLOOP.
ENDCASE.
Labels parameters

Enhancing the extract structure of Datasource 0CO_OM_CCA_9

Hi,
My requirement goes as, we have a cube already getting populated with the data of 0CO_OM_CCA_9.
Now I have a accounting doc. available. My issue is we need a corresponding COPA doc.and its customer and produt for this accounting doc.
My Functional guy says, we can get the corresponding copadoc. and its details from the table CE10010. So now I need to add to fields to my stnd. extract structure and populate these 2. I know how to add them to the structure. My issue is all about populating them.
I see in RSA2 , that the extractor is a FM, which provides no exit within .
As far as my knowledge goes, is it sufficient if I write some code in the CMOD to fetch data from CE10010 and then pass it on to the extract structure, or do we have any thing else to be done to populate them.
Thanks in advance,
Sudha

Hi
Enhancing Extract structure can be achieved through the coding (cmod).
Or else you can even go for the Generic Data Source to combine both the tables.
Hope it helps

Error while enhancing the Extract structure in LBWE

Hi All,
When I am trying to change the extract structure os logistic extractors in LBWE, it is giving me an error saying "Entries for application 11 still exist in the extraction queue".
Below is my scenario:
I have 3 clients in the same R/3 system, Client 010, 020 and 030.
Clients 020 and 030 are connected to my BW system. Client 010 will be used for all development while test loads can be done from clients either 020 or 030. Till now, I have tested my data flows only from client 030. Now, I have to add some extra field to the structure in LBWE but facing the above mentioned error.
I went into LBWQ in both the client 020 and 030 and deleted the queue and then tried to change the extract structure in client 010 but still the same error.
What else do I need to do to resolve this?
Thanks,
RPK.

Hi Raki,
We are still in development phase. I did all my developments(R/3) in client 010. Till now I did only full loads to BW from client 030 and haven't done any loads from client 020. My BW system is also connected to another sandbox client 100 but I haven't done any loads from that client aswell.
As I have to add some extra fields to the extractor from LBWE, I did the follwing steps in R/3:
1) I have deleted the setup tables from client 010, 020 and 030.
2) Deleted the data from LBWQ from clients 010, 020 and 030.
3) Trying to change the extract structure by clicking on "Maintenance" for the extractor in Client 010.
At this point it is throwing an error.
I thought that the client 100 might be a problem as I have transfer rules created in my BW system from this source system as well. As I do not need this source system anymore, I have deleted it from BW and tried changing the structure in LBWE but still the same problem.
Any ideas would be highly appreciated.
Thanks,
RPK.

Failed to enhance the extract structure 2lis_11_vaitm

Hi,
I would like to enhance the datasource 2lis_11_vaitm, therefore I go to RSA6 tcode, mark the required datasource and when press Enhance Extarct Structure button, I get this error message:
"DataSource 2LIS_11_VAITM does not allow append structures".
Is it possible to enhance 2lis_11_vaitm? if so how to do?
Thanks,
Mohamad.

Hi Mohammed,
Go To T-Code SE11 , In Data Type give your extract structure name MC11VA0ITM . Select display . Click on Append structure button and add the fields you want to enhance with. Then activate the append structure.
Regards,
Prakash

Need help in ABAP code

Hi All,
I have the data like this and ABC line is the primary object, Inline is the attribute.
ABC Line                                                                       Inline
GH04                    1001
OI04                    1031
OU04                    1002
OU05                                                                            1002
My requirement is like in the report. I have to use the Inline and restrict with the data when I restrict with 1001, 1031 and 1002. But it has to consider 1001, 1031 and 1002 which starts with only OU*. I donu2019t require all ABC lines.
I tried to write the code but I couldnu2019t.
Can any one give the code please?
Thanks
Sravani

if the ABC line item is OU* then you need to display 1001 and 1031 else you want display all the items
I m right???
reach me at
Edited by: shanthi bhaskar on Apr 15, 2010 5:20 PM

Need help for ABAP CODE

hi,
i need to reload the master data without FM, i put the comments on fm and relaod the data, now i having a problem, loading process is slow now as compair to before, when i was using with FM.i checked the manage of infoObject, it is show 1123455 records in "transfer" column and 0 record in "added" column, below is the start routine,
Please help me to fix that problem
IF NOT DATAPAK[] IS INITIAL.
    LOOP AT DATAPAK INTO S_DATAPAK.
      CLEAR V_INDEX.
      V_INDEX = SY-TABIX.
     IF S_DATAPAK-/BIC/ABRETPRI CO ' 0123456789.'.
       CLEAR: V_AMOUNT, V_PRC.
      V_AMOUNT = S_DATAPAK-/BIC/ABRETPRI.
      CALL FUNCTION 'RSAR_CURRENCY_CONVERT'
      EXPORTING
      I_CURRENCY = S_DATAPAK-CURRENCY
      CHANGING
      C_AMOUNT   = V_AMOUNT.
     V_PRC = V_AMOUNT.
     S_DATAPAK-/BIC/ABRETPRI = V_PRC.
    ENDIF.
IF S_DATAPAK-/BIC/ABBLNKFLG IS INITIAL.
        S_DATAPAK-/BIC/ABBLNKFLG = 'N'.
      ENDIF.
TRANSLATE S_DATAPAK-/BIC/ABSZRANGE TO UPPER CASE
IF S_DATAPAK-CURRENCY IS INITIAL.
      S_DATAPAK-CURRENCY = S_DATAPAK-WHLPRCCURR.
MODIFY DATAPAK FROM S_DATAPAK INDEX V_INDEX TRANSPORTING
     /BIC/ABRETPRI /BIC/ABWHLPRCE /BIC/ABBLNKFLG
     ENDIF.
*ENDLOOP.
ENDIF
Thanks

You need not use start routine to achieve this. Instead you can write transfer routines/formulas for those fields in UR.

ABAP code to Enhance Master data

Hi Friends,
can you send me a sample ABAP code to enhance the master data
Regards
Hari

Dear Adluru Hari Varma ,
Hereunder an example of code to enhance Master Data
0ART_SALES_ATTR for 0MAT_SALES:
EXIT_SAPLRSAP_002
DATA: l_biw_mvke_s LIKE biw_mvke_s,
l_tabix LIKE sy-tabix,
v_satnr LIKE mara-satnr.
CASE i_datasource.
WHEN '0ART_SALES_ATTR'.
LOOP AT i_t_data INTO l_biw_mvke_s.
l_tabix = sy-tabix.
clear v_satnr.
SELECT SINGLE satnr FROM MARA INTO v_satnr
where matnr = l_biw_mvke_s-matnr.
IF sy-subrc = 0.
l_biw_mvke_s-zzsatnr = v_satnr.
ENDIF.
MODIFY i_t_data FROM l_biw_mvke_s INDEX l_tabix.
ENDLOOP.
ENDCASE.
Also
the user exit code zxrsau02 to populate the new fields .say you add field zzfield1, user exit code zxrsau02 can be like
data : l_s_custattr like BIW_KNA1_S,
l_zzfield1 like tablexyz-fieldabc,
l_tabix like sy-tabix.
case i_datasource.
when '0customer_attr'.
loop at c_t_data into l_s_custattr.
l_tabix = sy-tabix.
fill the new field
select single fieldabc into l_zzfield1
where ....
l_s_custattr-zzfield1 = l_zzfield1.
modify c_t_data from l_s_custattr index l_tabix.
endloop.
take a look some links on enhancement
Enhancement
User exit
and download pdf 'enhancements in sap bw'
here you can find the steps ...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/59069d90-0201-0010-fd81-d5e11994d8b5
hope this helps.
Re: enhancements
Check in SDN you will find more programs
Hope it helps.Revert back to me if you have any queries
Regards
Bala

Problem in populating the new field from the extract structure. Kindly help

my requirement a new text field is added on R/3 side and I have to populate
the same field into BW.
In the R/3 a new customization table 'AAA' is created which will have
code - char 3 and
text - char 30.
The code field is added to a table BBB.
The SAP standard generic data source exracts data from the table BBB where in the new code field have been added.
Now I can the see the code field in the extract structure and not in the data source as the filed has selection value 'A' when checked in the ROOSFIELD table.
To populate the value in BW, I will be creating a Generic Master Data text wherein I fetch the values from the table 'AAA' which the fields code and text and replicate the same in BW.
In the reporting level, the code InfoObject will be selected as display both KEY and TeXT, by doing I can populate the values of TEXT in the reporting.
But to achieve the same I need to add the field code in the ODS but cannot do the same because I am not able to see the field code in the data source.
Kindly let me know how to achieve the same.
Also let me know if there is any alternate solution to populate the text field in BW.
Any Inputs will be appreciated.
Thanks

> You should get the userdatasources bound to the
> columns and assign the values of the recordset to
> each one and after that use "setLineData" to write in
> the matrix.
>
> hope it helps
Hi all,
i have created tables (non BO Tables) directly on the SQL-server and want to use recordset to populate a user form matrix.
Is there any workaround to achieve this using non BO tables?
Please provide some sample code since it is a very urgent matter.
regards
Daniel

Enhance 0CRM_OPPT_I extract structure

Friends
I got a requirement to enhance the extract structure
The CRM datsource is 0CRM_OPPT_I.
In that we do not have the requested delivery date.
Hence i need to enhance the structure.
Is that we need to follow the same process as that enhancements that we do in R3 or is there any other separate process.
Regards
Sundaresan

Same process
While replicating the DS in BI ,depending on how you have modelled your cube (3.x or NEW datasource flow) replicate the modified datasource as 3.x or NEW.
Hope it Helps
Chetan
@CP..

Unable to change the Extract structure

Hi All,
In LBWE in R/3, I need to the change the extract structure MC02M_0HDR for DataSource 2LIS_02_HDR, by including some fields using the maintenance tab, After doing the required changes when i give "continue", the system is throwing me the following error -
"Struct. from appl. 02 due to open V3 proc. not changed"..
The long text of the error message shows -
Diagnosis
Changing the extract structure MC02M_0HDR of application 02 is not recommended as there are no V3 update entries for the update module MCEX_UPDATE_02.
If an extract structure is changed for which there are still open V3 updates, these can no longer be updated and the V3 collective update is terminated.
Procedure
Start the V3 update and delete those update entries that are already incorrect. You will find these in the update overview.
Kindly reply me as soon as possible in this regard.
Regards,
Manickavasagan

Hello,
in transaction sm37 in the source system, you will find a job starting with LIS-BW-VB_APPLICATION*. Please select the job related to your application and in the menu Job->Delete, delte the same which is in the released state ready to be executed.
then you can go ahead and enhance the extract structure.
Hope it helps.
thanks

Need help in displaying error message on the same screen

Hi Experts,
I have written a report which gets called from IW52 by clicking one of the action items. Now in my report when I am trying display an error message it is getting displayed at the bottom of a blank screen. My requirement is to display it at the bottom of the IW52 screen, so that user can rectify the error.
Please help.
Regards,
Sambaran Ray.

Hi,
Probably you need to find a way to enhance the standard code.
But make one thing sure that the code (included bu you) gets fired only when that specific report is being executed. Else it may harm the standard functionality.
Hope this helps you.
Regards,
Tarun

Need Help in displaying data labels at the top of the bars in CFCHART

Hi,
I have a cfchart with two line series and one bar. I want to display the data values at the top of the bar and the line series. Below is the XML I am using:
<cfsavecontent variable="chartStyle">
<?xml version="1.0" encoding="UTF-8"?>
<frameChart is3D="false" isMultiline="true">
 <frame xDepth="12" yDepth="11" outline="black" stripColor="light_gray">
 <background maxColor="black"/>
 </frame>
<yAxis scaleMin="0" scaleMax="30">
 <labelFormat pattern="###"/>
<parseFormat pattern="###"/>
<labelStyle orientation="Horizontal"/>
<titleStyle font="Arial-11-bold" isMultiline="false"><![CDATA[
#Vehicles ]]>
</titleStyle>
</yAxis>
<yAxis2 scaleMin="0" scaleMax="30">
 <labelFormat pattern="###"/>
<parseFormat pattern="###"/>
<labelStyle orientation="Horizontal"/>
<titleStyle font="Arial-11-bold" isMultiline="false"><![CDATA[
Profitability ]]>
</titleStyle>
</yAxis2>
<dataLabels foreground="black" font="Arial-12-bold"/>
<legend allowSpan="true" equalCols="false" halign="Center" isMultiline="true" placement="Bottom"><decoration style="None"/></legend>
<elements place="Stacked" drawOutline="false">
<series index="1" place="Stacked">
<dataLabel style="value"/>
</series>
 <series index="2" place="Stacked">

</series>
<series index="3" place="Stacked">

</series>
<series index="0" place="Stacked" shape="Line" isSecondAxis="true">
<dataLabel style="value"/>
 </series>
<series index="1" place="Stacked" shape="Line" isSecondAxis="true">
<dataLabel style="value"/>
 </series>
</elements>
 <table>
 <heatmap isEnabled="false" minLevel="0.0" maxLevel="0.0"/>
 </table>
 <popup background="white" foreground="black"/>
 <paint isVertical="true" min="26" max="76"/>
 <insets right="5"/>
</frameChart>
</cfsavecontent>
Can anyone please tell me what is the mistake i am doing.
Thanks in advance,
Jeevan Pulugu.

Hi,
Probably you need to find a way to enhance the standard code.
But make one thing sure that the code (included bu you) gets fired only when that specific report is being executed. Else it may harm the standard functionality.
Hope this helps you.
Regards,
Tarun

ABAP code to enhance a standard data source

Hi BW experts,
I am a novice in BW and I need to append a standard datasource 0DAT_SRC with a field FLD1 from table TABL1.Extract structure: EX0001.
Can anybody please suggest how this can be done?I guess it requires some ABAP coding to be done in the conversion exits.
Many,many thanks in advance!!

Following are the steps to enhance Standard Data source.
1. goto tc RSA6.
2. Select the Data Source which you want to enhance.
3. Select display Data Source (Ctr+f2)
4. Double click on the Extract structure.
5. click on the Append Structure.
6. Add the required fieds starting with ZZ*.
7. Avtivate the Append Structure.
To populate the data into this field you must have a project created to access the FM 'EXIT_SAPLRSAP_001'.
to Create Project code goto tcode: CMOD
1. Enter the Project name and click on create
2. go to components select the required function module.
EXIT_SAPLRSAP_001 for Transactional DS (RSR000
EXIT_SAPLRSAP_002 for Master DS
Goto SE37 and enter the Respective Function module (ex . EXIT_SAPLRSAP_001) and click on the include zxxxxx. then write the code to populate the extra fields added to the DS.
Sample code:
CASE i_datasource.
WHEN '2LIS_11_VAITM'.
loop at c_t_data into work_ar.
do some selections, some calculations ....
append work_ar to c_t_data. " add a new record
modify c_t_data from wa. " change the existing record
endloop.
endcase.

Need help in ABAP code to Enhance the Extract Structure ?????

Similar Messages

Maybe you are looking for