Need help in Conversion of Distance using the FM 'UNIT_CONVERSION_SIMPLE'
Hi Group,
I have a requirement to convert a value of type (NUMC - length 4) which has the value for Distance.
Now I am using the FM 'UNIT_CONVERSION_SIMPLE' to convert the value of the above from 'Meter' to 'KM' as under:
CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
EXPORTING
input = value_in(value of the above mentioned field)
unit_in = 'M'
unit_out = 'KM'
IMPORTING
output = value_out(this value should have the calculated value of the Distance in KM).
and now, I will pass this(value_out) to the field of (NUMC - lenght 4).
I was facing issues while executing the Function Module as :
'Please use a number field for the input value'.
please let me know how to overcome this error or else let me know any other alternative solution is available to overcome this.
thanks for your help in advance.
Regards
Vishnu.
Hello
Try to use FM 'MATERIAL_UNIT_CONVERSION'
And read this: UNIT_CONVERSION_SIMPLE
Similar Messages
-
New airport user need help setting up a pc on the network
went and bought a airport extream today and my mac works fine on it but i also have a pc and need help getting it to work with the airport express. it seems to see the airport in the network slection screen but after i put in the pass i get nothing and it returns to the "chose a wireless network" can anyone help?
Thanks for the reply.
That's interesting, I guess I had assumed that would be a basic thing.
Right now the 4000 number is in port 1, and then 4244 is in port 2. So if no one else is on the phone, and my boss picks up his phone, dials 9 then XXX-XXXX, he will be routed outbound on the 4000 line on port 1. Then while he's talking, if I pick up the phone and dial 9 then XXX-XXXX, I will be routed out on the 4244 line on port 2.
Am I understanding that correctly?
If that is the case, then that is a bit frustrating. Our 4000 line has everything on it, call waiting, caller id, long distance, etc. But the 4244 line is just a basic service. So if I'm calling local or toll free, I don't want to tie the other line up in case someone else needs to make a long distance call to a client. Is there any work around to that at all? Is there any way to use steering digits to point the call to the right line? Would we have to put the PSTN lines on seperate SPA400's?
Again, any comments and suggestions are much appreciated!
Message Edited by VoIP_Me on 07-30-2008 06:27 AM
Message Edited by VoIP_Me on 07-30-2008 06:28 AM -
While saving a workflow using SharePoint designer on a SharePoint site, I get the following error:
Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.
Steps to recreate error:
Login to the WFE server hosting IIS and workflow manager, open SharePoint Designer 2013 and login to a SharePoint site.
Access the list using SharePoint Designer 2013, in the workflow section, click new workflow.
In the new workflow dialog, enter workflow details, click save (see screenshot below).
Error message is displayed as below:
After restarting SharePoint Designer, the saved workflow is not seen in the site/workflows or list/workflow section.
Workaround
When the above steps are repeated while accessing the site via SPD from any other box besides the WFE/Workflow manager host server, the error is not encountered and its possible to save/publish workflows.
Notes
Workflow Manager 1.0 is installed.
The site has been registered with Workflow manager using Register-SPWorkflowService
cmdlet.
Any clue on why is this happening?Hi Vivek,
Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Need Help in Splitting a String Using SQL QUERY
Hi,
I need help in splitting a string using a SQL Query:
String IS:
AFTER PAINT.ACOUSTICAL.1..9'' MEMBRAIN'I would like to seperate this string into multiple lines using the delimeter .(dot)
Sample Output should look like:
SNO STRING
1 AFTER PAINT
2 ACOUSTICAL
3 1
4
5 9" MEMBRAIN
{code}
FYI i am using Oracle 9.2There's this as well:
with x as ( --generating sample data:
select 'AFTER PAINT.ACOUSTICAL.1..9" MEMBRAIN' str from dual union all
select 'BEFORE PAINT.ELECTRIC.2..45 caliber MEMBRAIN' str from dual)
select str,
row_number() over (partition by str order by rownum) s_no,
cast(dbms_xmlgen.convert(t.column_value.extract('//text()').getstringval(),1) as varchar2(100)) res
from x,
table(xmlsequence(xmltype('<x><x>' || replace(str,'.','</x><x>') || '</x></x>').extract('//x/*'))) t;
STR S_NO RES
AFTER PAINT.ACOUSTICAL.1..9" MEMBRAIN 1 AFTER PAINT
AFTER PAINT.ACOUSTICAL.1..9" MEMBRAIN 2 ACOUSTICAL
AFTER PAINT.ACOUSTICAL.1..9" MEMBRAIN 3 1
AFTER PAINT.ACOUSTICAL.1..9" MEMBRAIN 4
AFTER PAINT.ACOUSTICAL.1..9" MEMBRAIN 5 9" MEMBRAIN
BEFORE PAINT.ELECTRIC.2..45 caliber MEMBRAIN 1 BEFORE PAINT
BEFORE PAINT.ELECTRIC.2..45 caliber MEMBRAIN 2 ELECTRIC
BEFORE PAINT.ELECTRIC.2..45 caliber MEMBRAIN 3 2
BEFORE PAINT.ELECTRIC.2..45 caliber MEMBRAIN 4
BEFORE PAINT.ELECTRIC.2..45 caliber MEMBRAIN 5 45 caliber MEMBRAIN
{code} -
Hello,
I have the following scenario for the installation of EPM 2013 environment:
1 Server running Windows 2008 R2 SQL Server 2008 R2 Service Pack 2
1 Windows Server 2008 R2 Standard SP1, running Sharepoint 2013 Enterprise (Standard Initially installed and then migrated to the Enterprise in order to install Project Server 2013), Project Server 2013 and Workflow 1.0 (2013).
After configuring and validating the configuration of Workflow 1.0 by http://server_name.example.com:12291 page and also check the Application Services in Central Administration and receive the Workflow Status = Connected.
Alright, but when I run the SPD 2013 RTM to test the creation of Sharepoint Workflow 2013, I get the following warning:
"Server Side activties have been updated. You need to restart SharePoint Designer to use the updated version of activities."
I've tried:
a. Restart SPD2013;
b. Restart Server 2013 and Sharepoint Workflow 1.0;
c. Reinstall and reconfigure Workflow 1.0
And the message is always displayed, preventing the use of Workflow Sharepoint 2013.
Can anyone help me, I'm in the middle of a deployment to a customer.
Print of alertHow did you uninstalledLanguage Pack from SharePoint 2013 ? when I googled it I found that language pack cannot be uninstall@
http://technet.microsoft.com/en-us/library/cc262108.aspx
"If you no longer have to support a language for which you have installed a language pack, you can remove the language pack by using the Control Panel. Removing a language pack removes the language-specific site
templates from the computer. All sites that were created that have those language-specific site templates will no longer work (the URL will produce a HTTP 500 - Internal server error page). Reinstalling the language pack will make the site functional again.
You cannot remove the language pack for the version of SharePoint 2013 that you have installed on the server. For example, if you are running the Japanese version of SharePoint 2013, you cannot uninstall the Japanese language support for SharePoint 2013." -
I need to tell Print services to use the 2nd ethernet port
I need to tell Print services to use the 2nd ethernet port
Thanks in advance to anyone who can shed some light. My research has led me to a dead-end so far. Running 10.3.9 on my server. XServe Dual 2.3
I want to have File services and the various other duties pushed through one ethernet port, and print services on the other. I know there is probably a config file to make one simple edit, but I can not find it, or perhaps a "defaults" type command.
Also, where is this "command-line administration guide" that I keep running across on Apple's support?
Thanks in advance.
MattSimilar issue here too. Is it the subnet? Basically, I'm having a problem printing to an AirportExpress-served printer. Our network looks like this:
(From Outside...>>>...to Inside)
(Public IP) DSL Modem
...(10.0.0.x) Airport Express -- HP DesignJet 100 USB -- Airtunes/stereo
...(10.0.0.x) NetGear Wireless Router
...(10.0.0.x nic 0) Mac OS X Server (192.168.0.x nic1)
......(192.168.0.x) Mac OS X client
......(192.168.0.x) Mac OS X client
......(192.168.0.x) Mac OS X client
The printer driver does not appear to be able to do IP printing, it assumes a direct USB connection. We can setup the OS X Server with the printer served by the Airport Express, as it is found via Bonjour, and then we share its queue via Server Admin. The problem is that the LAN clients cannot print to this server queue. The printer gets stopped at the server.
If we turn OFF the OS X Server's firewall, printing works from both the clients and obviously from the Server. I think my question is this: what ports or services need to be turned on in order for the clients to print? There is no clear checkbox for "Bonjour Printer Sharing", and I'm curious what ports this would open, and if it would be safe. I thought it would work because we're pushing the print job up through the firewall, but apparently some response needs to come back through the firewall, and that's what's not happening.
And to tack onto this, how could we also push iTunes to the Airport Express from the Clients? Assuming the music goes over different ports than the print jobs. ?
Thanks in advance for any help. -
I have a Steinberg MI4 and a Roland Fantom X7, and am trying to use my Fantom in Logic to record audio. Need help setting it all up using MIDI cables. Please help !
Encryption wouldn't matter except for Wifi.
While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
* A PowerPC G3, G4, or G5 processor
* Built-in FireWire
* At least 256 MB of RAM (I recommend 1GB minimum)
* DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
* At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
As far as Memory, that's sort of easy, find your eMac here...
http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/ -
Allan Eckert, need help on G5 Coolscan 5000 use
Allan , need help on G5 Coolscan 5000 use. Please email me from my profile.
Thank you,
FrankJust to chime in with my 2 cents and experience ...
A few years ago I used a coolscan 4000 to scan my personal slides as a project. I had about 2000 of them from over the last 20 years and it took me about 6 weeks of personal time to do this. It was done on a Windows P4 2.5GHz Dell, but the slowest part was the actual scanning itself. I used 1 pass, Digital ICE, and saved them as 16bit TIFFs .... a whopping 65MB per scan.... To speed things up I bought the Nikon Slide adapter ($600 CDN) that would batch scan 50 slides at a time, however it would jam ( especially with the older cardboard mounted Kodachrome slides) periodically ... oh maybe 20-30 times with 2000 slides, and that really wasted time as I had to determine what need to be rescanned, and restart at the offending slide. This also would happen in the middle of the night when I was sleeping after setting the batch scan to run all night. Jamming often occurred as two slides tried to be scanned at the same time, as well as a slightly 'bent or creased' mount I found that the newer plastic mounts were better, but not entirely jam free, Nikon has some info on how well the various mounts work in their adapter on their website. Anyway I wish you well with 300+K slides to scan and recommend the batch slide adapter, and I think your speed will be determined more by the HW scan time than the CPU/GPU, so I would try to get as many scanners going as you can with that number of slides.
-Robert
PS I now have all originals in Aperture, and gave up the Dell 3 years ago. -
I NEED HELP!! Been calling since the end of Nov and being charged for a Warranty device. The device was returned the next day!! Been calling twice a week.. I NEED HELP 6 TCC TICKETS HAVE BEEN OPENED - PROMISED CALLS BACK AND NEVER GET CALLS.
About to cancel my account and move to AT&T
TCC TICKETS: (removed)
I am trying here for the last resort. After this evening my account along with my business account will be cancelled. Total lines that Verizon will have lost will be 93 lines.
PLEASE SOMEONE JUST HELP ME!!!!
I already tweeted and facebook messaged Verizon. Your CS group has gone down hill over the last 3-6 months. I use to enjoy being a customer.
>> Edited to comply with the Verizon Wireless Terms of Service <<not all the lines have ETF's. I have 30 tablets and the rest phones. The phones have ETFs and the tablets are all month to month.
The total to move my account over is going to come out to about $8500.
Rep has been trying to get my business for years. I was always loyal to Verizon until this happened. -
i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/software for my device even though i have the latest itunes on my computer. i have tried reinstalling itunes but it still cannot find my phone and now i cannot use my phone as it is stuck on the sync to itunes screen
Have you downloaded and installed the latest version of iTunes from here:
http://www.apple.com/itunes/download/ -
I need help, yesterday I installed and reinstalled the Yosemite system and take long to turn on my laptop, the bar takes to fill, and I'm worried.
Can you help? thankrevert back to Maverick that is what I had to finally do. This was the worst upgrade I have ever seen. Hopefully you have Time Machine backup and can revert back. It was pretty painless except for a few issues. I will wait until Apple gets their stuff together on this upgrade or may never will.
-
Hi i need help one of my key on the keyboard dosen't work for some reason please help
hi i need help one of my key on the keyboard dosen't work for some reason please help
try smc reset
http://support.apple.com/kb/ht3964
and Pram reset
http://support.apple.com/kb/ht1379
(Try pram a few times to get correct sequence)
Check what you have selected in
system preferences/system/accessibility/keyboard
and system preferences/hardware/keyboard (keyboard and keyboard short cuts tabs) -
Intavieuw en instadesk account: Perfectly dowload it but I cant find where I can make an account. Whithout an account I cant loggin on both programs. Who can help me sow I can use the apps! Thank you.
Tina,
I would go crazy if this was me. You may find this interesting from the customer agreement (to see full agreement go here:Customer Agreement | Verizon Wireless):
"HOW AND WHEN CAN I DISPUTE CHARGES?
If you're a Postpay customer, you can dispute your bill within 180 days of receiving it, but unless otherwise provided by law or unless you're disputing charges because your wireless device was lost or stolen, you still have to pay all charges until the dispute is resolved. If you're a Prepaid customer, you can dispute a charge within 180 days of the date the disputed charge was incurred. YOU MAY CALL US TO DISPUTE CHARGES ON YOUR BILL OR ANY SERVICE(S) FOR WHICH YOU WERE BILLED, BUT IF YOU WISH TO PRESERVE YOUR RIGHT TO BRING AN ARBITRATION OR SMALL CLAIMS CASE REGARDING SUCH DISPUTE, YOU MUST WRITE TO US AT THE CUSTOMER SERVICE ADDRESS ON YOUR BILL, OR SEND US A COMPLETED NOTICE OF DISPUTE FORM (AVAILABLE AT VERIZONWIRELESS.COM), WITHIN THE 180–DAY PERIOD MENTIONED ABOVE. IF YOU DO NOT NOTIFY US IN WRITING OF SUCH DISPUTE WITHIN THE 180-DAY PERIOD, YOU WILL HAVE WAIVED YOUR RIGHT TO DISPUTE THE BILL OR SUCH SERVICE(S) AND TO BRING AN ARBITRATION OR SMALL CLAIMS CASE REGARDING ANY SUCH DISPUTE."
This may help you also: Arbitration and Mediation FAQs | Verizon Wireless
You can dispute any charges by doing an Arbitration or Mediation. I have never done it, so I can not help much there but this all may get you started.
Let me know if any of this works! Good Luck! Please keep me updated. I really hope they help you. -
i need help please , i try to use itunes but my iPhone don't appear on itunes, i try everyting ,dowwload itunes again restart computer and iPhone,restart running device support,etc.
Windows doesn't detect iPhone: http://support.apple.com/kb/ts1538
Mac: http://support.apple.com/kb/ts1591 -
I need help writing a script that finds the first instance of a paragraph style and then changes it
I need help writing a script that finds the first instance of a paragraph style and then changes it to another paragraph style. I don't necessarily need someone to write the whole thing, by biggest problem is figuring how to find just the first instance of the paragraph style. Any help would be greatly appreciated, thanks!
Hi,
Do you mean first instance of the paragraph style
- in a chosen story;
- on some chosen page in every text frames, looking from its top to the bottom;
- in a entire document, looking from its beginning to the end, including hidden layers, master pages, footnotes etc...?
If story...
You could set app.findTextPreferences.appliedParagraphStyle to your "Style".
Story.findText() gives an array of matches. 1st array's element is a 1st occurence.
so:
Story.findText()[0].appliedParagraphStyle = Style_1;
//==> this will change a paraStyle of 1st occurence of story to "Style_1".
If other cases...
You would need to be more accurate.
rgds
Maybe you are looking for
-
Function module for calculating sigma balance
Is there any function module available in SAP for calculating sigma balance. Thanks Gaurav
-
Regarding output type Information
Hi Gurus, I have more than 400 output type and i want to know for which document type and who is using these output type. Please help me to solve this issue. thanks Hemant
-
I get incomplete printing for anything in black ink. and test bars are also faint
when printing documents the text in black comes out incomplete, some are fine, others are missing. color images, printing are fine. Test page comes out with extremely light for the black toner images as well as the black bars
-
AAAGGGHH!!! Selection sort with external file!
Hi, i am trying to sort marks from an external file in ascending order, using a selection sort via an existing class StudentMark. However, i am receiving 1 error when i compile it!!!! code below: import java.io.*; import java.util.*; class sort
-
Is it possible to run an AEBSn in Bridge Mode and still access an attached USB2 drive over the internet? I've got my network set up to allow me access to my computers at work (through VNC as well as afp). If it helps, here is my network configuration