Need help in date conversion(it's Urgent)

I am reading data from the text file... and inserting that data into the oracle table(using bpel process)
I have following problem with the date field.
In the XSD file if i specify the date format as nxsd:dateFormat="ddMMyyyy" and when i pass null value in place of date,partnerlink(file adapters read ) is not reading the data.
When i remove the dateFormat="ddMMyyyy in the xsd file then it is reading correctly and i am able to insert that data into the table.
Can anybody give me the solution to the above problem

from information you've given i'm concluding that
You've tried reset (*#7370#)
Ensured that you've successfully upgraded, i mean you didn't suffer a failed upgrade(*#0000#)
Though NSU uses user data conservation technology, you might've lost settings, which i'm sure you've checked and its there and selected correctly.
As the problem started after firmware upgrade and glitch seems to be with connectivity(i remember browser improvement was one of changelog of last update), so your phone somehow didn't get upgraded properly. Only way out is to consult nokia care in your city.

Similar Messages

Need help restoring data after security wipe - Urgent!

Hello,
I am in need of urgent help.
I had saved some really important information in the memos of my blackberry curve 8520. After that I changed my phone to a non-blackberry phone. but I still had the old phone but it was kept off most of the time. I had backups from June 13, 2013. very recently I wiped the phone. (Very big mistake) Now I am in need of that information that I had saved in the memos. Now when I visit the blackberry protect website through my laptop it shows that the back up is there with 15 memos and many other things. but when I open the app of blackberry protect on my phone it shows that there are no previous versions of backup available to restore.
Now please tell me and help with this. I badly need the information that I have stored in the memos of this earlier back up version.
Another thing I have noticed is that there is a problem in the link between BB Protect website and the BB Protect app on my phone. For example, if I click on "Play Sound" or "Display a message" on the BB Protect website, it tries to communicate with the device and then waits for the device to respond and then it fails to do the function clicked.

Hello,
Please check very very very very (did I say that enough?) carefully that you are using the exact same BBID credentials on your new BB that you are logging into via PC.
If they are not the same, then that explains why it cannot present you with those backups on the device...they are associated to a different BBID than you are using on your BB now. To change your BB over to the BBID that contains the backups you require, you must WIPE the BB:
KB26694 How to change the BlackBerry ID on a BlackBerry PlayBook tablet or BlackBerry smartphone
However, be very careful when you then associate the BB to that other BBID...done incorrectly, you can lose your prior backups...refer:
KB31489 BlackBerry Protect for BlackBerry smartphones does not display any backup files to restore
Then again, if you are using the exact same BBID on both the device as well as via PC/browser, then the method discussed in KB31489 may already have been done incorrectly, wiping out those prior backups (and there is no way to retrieve them).
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Need help on data Conversion

Hi Gurus,
Please help me with process and validations in following conversions.
Sub Inventory conversion
Hr Locations conversion.
I am working on R12 implementation project.
Thanks in advance.
GVK.

Hello,
In DSV you can change the linked table into a "named query" and then you can do the data type conversion there, like
SELECT CONVERT(varchar(20), MyIntColumn) AS MyCharColumn
Olaf Helper
[ Blog] [ Xing] [ MVP]

Need help in date Validation Urgent

Hi ,
We need help in Date Validation.
we have 2 Date fields on the form Start Date, End Date
The requirement is: End Date (May not be greater than 30 years from the start date).
I have written following script on End Date Exit event. But the problem is its calculating 30 years from the Current Date not from the Start Date
var tDate = util.scand("mm/dd/yyyy", new Date());
var M = tDate.getMonth();
var D = tDate.getDate();
var Y = tDate.getFullYear();
var SRes = util.printd("yyyy-mm-dd", new Date((Y+30), M,D) );
//app.alert(SRes)if (SRes <= this.rawValue){
app.alert("May not be greater than 30 years from the start date")
xfa.host.setFocus(
this);}
can someone please help me
Regards,
Jay

Hi,
You'll need to get javascript date from LCD field, and calculate & compare with the future date in javascript date.
try following script;
var sDate = StartDate.rawValue;
var wkStartDate = util.scand("yyyy-mm-dd", sDate);
var nYear = wkStartDate.getFullYear();
var nMonth = wkStartDate.getMonth();
var nDay = wkStartDate.getDate();
var wkFutureDate = new Date(nYear + 30 , nMonth, nDay);
sDate = EndDate.rawValue;
var wkEndDate = util.scand("yyyy-mm-dd", sDate);
if (wkEndDate.getTime() > wkFutureDate.getTime()){
xfa.host.messageBox("May not be greater than 30 years from the start date");
xfa.host.setFocus(this);

Need Help with Dates

I am printing a calendar and certain events will be helds on certain dates.
One can edit the event if it has not passed the date. Events in the past can be viewed but not edited.
When I query the database the date must be formatted dd-MMM-yy
I am able to get today's date by doing this:
java.util.Date today = new java.util.Date();
String formatString = "dd-MMM-yy";
SimpleDateFormat sdf = new SimpleDateFormat(formatString);
String today_str = sdf.format(today);
My code for printing the calendar: I left out some of the table formatting in the JSP page.
GregorianCalendar d = new GregorianCalendar();
int today = d.get(Calendar.DAY_OF_MONTH);
int month = d.get(Calendar.MONTH);
d.set(Calendar.DAY_OF_MONTH,1);
int weekday = d.get(Calendar.DAY_OF_WEEK);
for(int i = Calendar.SUNDAY; i < weekday; i++)
out.print("<td> </td>");
do {
int day = d.get(Calendar.DAY_OF_MONTH);
out.print("<td>" + day + "</td>");
String formatString = "dd-MMM-yy";
SimpleDateFormat sdf = new SimpleDateFormat(formatString);
//if(event exists on this day
// Get results
// print link for viewing
// if (after today) print link for edit
if(weekday == Calendar.SATURDAY)
out.println("</tr><tr valign=top>");
d.add(Calendar.DAY_OF_MONTH,1);
weekday = d.get(Calendar.DAY_OF_WEEK);
} while(d.get(Calendar.MONTH) == month);
if(weekday != Calendar.SUNDAY)
System.out.println();
The part I need help on is this:
//if(event exists on this day
// Get results
// print link for viewing
// if (after today) print link for edit
I'm looping through each day of the month to print the days. I have the month, day, year as integers. How can I create a date object out of that and compare it to today's date to test if it's before or after today???
All the function in the Date class that I think would do this have been deprecated.

Need Help with Dates
Here is some information about dates:
There are many edible palm fruits, and one of the most widespread and favored of these is the data (Phoenix dactylifera). Dates were cultivated in ancient land from Mesopotamia to prehistoric Egypt, possibly as early as 6000 B.C. Then--as now--dates were a staple for the natives of those dry regions. Much later, Arabs spread dates around northern Africa, and dates were introduced into California by the Spaniards in 1765, around Mission San Ignacio.
The date prefers dry, hot climates, because date fruits are injured at temperatures of 20 degrees F, and the damp climate of the California coast was not favorable for fruit production. In the mid-1800s, the date industry developed in California's hot interior valleys and in Arizona. Now the date industry in the United States is localized mostly in the Coachella Valley, where the sandy soils permit the plants to be deeply irrigated. Today the new varieties, mostly introduced in this century, produce about 40 million pounds of dates per annum, or over 60% of the dates consumed in this country. The rest are imported mainly from Persia. According to one survey, about one million people are engaged entirely in date palm cultivation worldwide.
Hope that helps.

Need Help with data type conversion

Hello People,
I am new to java, i need some help with data type conversion:
I have variable(string) storing IP Address
IPAddr="10.10.103.10"
I have to call a library function which passes IP Address and does something and returns me a value.
The problem I have is that external function call in this library excepts IP Address in form of a byte array.
Here is the syntax for the function I am calling through my program
int createDevice (byte[] ipAddress).
now my problem is I don't know how to convert the string IPAddr variable into a byte[] ipAddress to pass it through method.

Class InetAddress has a method
byte[] getAddress() You can create an instance using the static method getByName() providing the IP address string as argument.

Need help in date to number conversion

Hi,
I have a doubt in a date conversion, please help me.
I executed the below query, its throwing "invalid number" error.
select * from test
where date_sid between to_number(to_char('01-05-2009','dd-mm-yyyy'),'yyyymmdd') and to_number(to_char('02-05-2009','dd-mm-yyyy'),'yyyymmdd')
date_sid column is number datatype.
In my above query i want to pass the date value like '12-05-2009'. If i check my table date_sid looks like yyyymmdd. So how to convert '12-05-2009' to 20090512 in my above query. Please help me.
Thanks.

Use to_date instead of your to_char, and to_char instead of your to_number.
That said, that's very very sad to work on date as number format.
Nicolas.

Need help with Currency Conversion

Hello,
I need to implement currency conversion in our existing classic planning application (11.1.2.1) which was initially set as a multi-currency application but so far we didn’t have the users entering data in their local currencies. We were entering all the values in USD. Now the users will be entering data in their local currencies and we need to convert their local data into USD for reporting purposes.
I don’t have much experience with multi-currency applications and so I would really appreciate if the gurus here can guide and help me.
Our currency dimension has the following three members USD, B, C. Our reporting currency is USD which is the default currency for our application.
After reading some forum posts and documentation below are the steps I tried but couldn’t get it to work right. Correct me if I am doing something wrong, or in the wrong order or missing something.
Administration – Manage – Exchange Rates – Create – A_FY13 – Edit – Chose all the options – Average, Ending, BegBalance, Historical, Method – Clicked Next – Chose the Year as FY13 from the drop down (in Show Years) and entered the exchange rates for both B & C – Save.
A message was displayed – “Exhange Rate has been saved successfully”.
Administration – Manage – Currency Conversions – A_FY13 – Next - Currency - USD, Scenario – Actual, Version Type – Target, Version – Working – Save.
A message was displayed – “Scripts were successfully created”.
In EAS both the scripts – HspCRtT & A_FY13 were created.
Edited the A_FY13 script FIXs to only work on year FY13 for one month for testing purposes.
In workspace edited the Actual scenario to be associated with the A_FY13 exchange rate table.
In EAS ran the HspCRtT script first followed by ACT_FY13. The scripts completed successfully.
While pulling data (Level 0 data) in Excel the data is present in “Local” intersection for the accounts I am looking at but when looked at the USD intersection the data is converted right for only one account, for some other accounts there is no data in the intersection and for another account which is a weight account (weight of a product) which doesn’t need to get converted the values got converted. For some reason the conversion isn’t working right for the accounts.
Are there any steps that I am missing here? Please let me know your ideas and help me. Any help is appreciated and I will be looking forward for suggestions and ideas.
Thanks.
~ Adella
P.S ~ I had posted a similar question a couple months earlier but still couldn't really get things to work... and so I am posting it again to get more help. For those who are feeling that they have read this kind of a question earlier from me...please bear with me as I couldn't get my issues resolved and still couldnt get things implemented successfully. Again, I would really appreciate if you could further help me with your ideas and suggestions.

replied to the old thread
Regards
Celvin
http://www.orahyplabs.com

Need help, MMC tree got deleted, very urgent.

Hi,
My sap MMC tree, got deleted in the server. I have been trying to restore since 2 days and couldnt succeed, please help me.
1) i have uncared the sapmmc.sar from   Kernal\NT\I386\MMC\sapmmc.sar file
2) i got about 7 files, in which there is one sapmmc file i have tried to double click it, n check but no go.
3) i also tried to run the Sapstartsrv.exe file and fill in up the values in pop up window. & filled up the following values :-
                    SID: DEV
                    NR: 00
                    StartProfile: (entire start profile path given)
                    user: devadm
                    passwd; (given)
- but it says "the account name is invalid or does not exist or the password is invalid for account name specified"/
- no go in both the cases.
Please need help very urgent.
Regards,
Satish.

siva,
I am getting same error since 2 days
SID: DEV
NR: 00
Start Profile: (entire start profile path)
User: <hostname>/devadm
passwd: ****
Error:
cannot install service
create service failed:421
The account name is invalid or doesnot exist, or the passwd is invalid for the account name specified.
Edited by: satish c on Jun 4, 2008 11:12 AM

Need help with date range searches for Table Sources in SES

Hi all,
I need help, please. I am trying to satisfy a Level 1 client requirement for the ability to search for records in crawled table sources by a date and/or date range. I have performed the following steps, and did not get accurate results from Advanced searching for date. Please help me understand what I am doing wrong, and/or if there is a way to define a date search attribute without creating a LOV for a date column. (My tables have 500,00 rows.)
I am using SES 10.1.8.3 on Windows 32.
My Oracle 10g Spatial Table is called REPORTS and this table has the following columns:
TRACKNUM Varchar2
TITLE Varchar2
SUMMARY CLOB
SYMBOLCODE Varchar2
Timestamp Date
OBSDATE Date
GEOM SDO_GEOMETRY
I set up the REPORTS table source in SES, using TRACKNUM as the Primary Key (unique and not null), and SUMMARY as the CONTENT Column. In the Table Column Mappings I defined TITLE as String and TITLE.
Under Global Settings > Search Attributes I defined a new Search Attribute (type Date) called DATE OCCURRED (DD-MON-YY).
Went back to REPORTS source previously defined and added a new Table Column Mapping - mapping OBSDATE to the newly defined DATE OCCURRED (DD-MON-YY) search attribute.
I then modified the Schedule for the REPORTS source Crawler Policy to “Process All Documents”.
Schedule crawls and indexes entire REPORTS table.
In SES Advanced Search page, I enter my search keyword, select Specific Source Group as REPORTS, select All Match, and used the pick list to select the DATE OCCURRED (DD-MON-YY) Attribute Name, operator of Greater than equal, and entered the Value 01-JAN-07. Then the second attribute name of DATE_OCCURRED (DD-MON-YY), less than equals, 10-JAN-07.
Search results gave me 38,000 documents, and the first 25 I looked at had dates NOT within the 01-JAN-07 / 10-JAN-07 range. (e.g. OBSDATE= 10-MAR-07, 22-SEP-07, 02-FEB-08, etc.)
And, none of the results I opened had ANY dates within the SUMMARY CLOB…in case that’s what was being found in the search.
Can someone help me figure out how to allow my client to search for specific dated records in a db table using a single column for the date? This is a major requirement and they are anxiously awaiting my solution.
Thanks very much, in advance….

raford,
Thanks very much for your reply. However, from what I've read in the SES Admin Document is that (I think) the date format DD/MM/YYYY pertains only to searches on "file system" sources (e.g. Word, Excel, Powerpoint, PDF, etc.). We have 3 file system sources among our 25 total sources. The remaining 22 sources are all TABLE or DATABASE sources. The DBA here has done a great job getting the data standardized using the typical/default Oracle DATE type format in our TABLE sources (DD-MON-YY). Our tables have anywhere from 1500 rows to 2 million rows.
I tested your theory that the dates we are entering are being changed to Strings behind the scenes and on the Advanced Page, searched for results using OBSDATE equals 01/02/2007 in an attempt to find data that I know for certain to be in the mapped OBSDATE table column as 01-FEB-07. My result set contained data that had an OBSDATE of 03-MAR-07 and none containing 01-FEB-07.
Here is the big issue...in order for my client to fulfill his primary mission, one of the top 5 requirements is that he/she be able to find specific table rows that are contain a specific date or range of dates.
thanks very much!

I need help restoring data from my time machine.

1) On the time machine, where do I find the TRASH file that is located on the dock in my desktop? I'd like to restore that to a prior date but can't find it.
2) I DID A VERY BAD THING & need help to get back to where I was before. I wanted to delete files that were taking up lots of space. My OTHER section was using 160G. I downloaded OmniDiskSweep and found that 120G was being used by my virtual machine (I run Quicken in Windows, through VMware). I started to delete files that were called Snapshots assuming these were the snapshots that the program regularly takes of my files. Apparently they were not. I also deleted the program Windows XP Professional because that was never used. When I try to open VM or quicken program, it says it is missing a particular snapshot, i.e. Snapshot 11104. I deleted about 20 of these. I left all the other files that said Windows XP Home Edition. But now it shows that I only have the Professional Edition, even though that's what I deleted. I'm trying to restore from Time Machine and it looks like the information is not there - I've tried various different backups and nothing seems to have the information I need. The earliest back up I have is from 5/7 when I started time machine on a new external 1TB HD. Would that have the information I need since it's the very first back up? Please Help.

I am assuming it's real data because it's taking up storage on my HD. It falls in the category "other" and the total of this section is 160G. Here is a snapshot of the virtual machine.
I also took a shot of the VM snapshots & it tells how much space is being taken up by the snapshots.
I've now changed the number of snapshots taken down to 12 (didn't know I had this option) & I can delete alot of the 21 snapshots that have already been saved. I have no idea how much of the HD was set aside for the VM because someone else installed it for me 5 years ago. I've had enough problems with it over the years that I've wanted to switch to Quicken for Mac or find another financial program to use. I've upgraded the VM 2x over the years, but didn't want to spend $100 for Version 5. I understand the concept of a VM but that's about all.
I did do the disk cleanup in Windows on the C drive. I deleted 700 MB of temporary files and then compressed 4G of data down to 2G. While the cleanup was progressing it said that the C drive was 30.99G and 78% of it was free. That just doesn't make sense to me. It recommended a defrag, so I did that also.
I'm pretty sure it's real data because I recently had to switch from a 320G external HD for TM, to a 1T HD. One TM backup was over 300G which I found to be excessive because I basically use my computer for mail, some word processing, and my financial data.
Thanks again for all your help. I really appreciate it.

Need Help:Reading Data from RU payroll cluster for table GRREC

Hi...
I need help on how to read data from RU cluster table for table GRREC for the employee & run date and get the value from structure PC292 .
Please let me know about the includes and the import and export statements to be used.
Thanks in advance,
RAVI.

Hi,
Here goes pseudocode
Includes:
include: rpppxd00    ,
            rpppxd10     ,
            rpc2cd09     ,
            rpc2rx02_ce , "if ldb pnp_ce is used else use the same include with out _ce
            rpc2rx29      ,
            rpc2rx39      ,
            rpppxm00    ,
            rpc2ruu0_ce ,
Declare:
DATA : i_rgdir   LIKE pc261        OCCURS 0 WITH HEADER LINE     ,
           i_result TYPE pay99_result OCCURS 0 WITH HEADER LINE ,
           i_grrec   LIKE pc292           OCCURS 0 WITH HEADER LINE .
start-of-selection:
GET pernr.
Get the RGDIR VALUE for the current PERNR & selected Molga
get rgdir data TABLES i_rgdir
                      USING pernr-pernr
                                 p_molga " parameter
CD-KEY-PERNR = PERNR-PERNR.
RP-IMP-C2-CU.
i_rgdir [] = rgdir[].
LOOP AT i_rgdir WHERE fpbeg LE pn-endda
                    AND fpend GE pn-begda
                    AND srtza EQ 'A'
                    AND void   NE   'V'.
get_result_tabs   TABLES i_result
                               USING 'RU'    " US cluster
                                     pernr-pernr
                                     i_rgdir-seqnr
      RX-KEY-PERNR = PERNR-PERNR.
      UNPACK i_RGDIR-SEQNR TO RX-KEY-SEQNO.
      RP-IMP-C2-RU.
i_grrec[] = i_result-inter-grrec[].
LOOP AT i_grrec.
case i_grrec.
use wage types required here and pass the data to output table.
endcase.
endloop.
endloop
end-of-selction.

Need help in date formatting

Hi,
I need to print date in the following format:
Jan 21, 2007
11:23 AM 21/01/2007
21-01-2007 18:23
Now as per condition of assignment the year, month, day and hour, min, sec all are entered as separate integer values.
my code:
import java.util.*;
import java.text.*;
public class stringToDate
// Integer value of date and time variables
int day=21;
int month = 1;
int year=07;
int hour=18;
int min=23;
int sec=14;
// Converting integer value into date
public void convertIntoDate()
     String strTmp= day+"/"+month+"/"+year+" "+hour+":"+min+":"+sec;
     System.out.println("String: " + strTmp);
     DateFormat dateFormat = new SimpleDateFormat("dd/MM/yyyy HH:mm:ss");
     try
          Date outDate = dateFormat.parse(strTmp);
          System.out.println("Converted: " + dateFormat.format(outDate));
     catch(Exception e){ System.out.println("Exception: " + e);}
public static void main(String args[]) {
     stringToDate dF = new stringToDate();
     dF.convertIntoDate();
}Now as per my code i am able to print in the following format:
String: 21/1/7 18:23:14
Converted: 21/01/0007 18:23:14
But if i try to print in other formats it gives me following error message:
Exception: java.text.ParseException: Unparseable date: "21/1/07"
Please help me....

vinee wrote:
Hi,
I tried different output format but still i'm facing the same issue
Following the complete code and error message....
import java.util.*;
import java.text.*;
public class stringToDate
// Integer value of date and time variables
int day=21;
int month = 1;
int year=07;
int hour=18;
int min=23;
int sec=14;
// Converting integer value into date
public void convertIntoDate()
DateFormat dateFormat;
Date outDate=null;
String strTmp= day+"/"+month+"/"+year+" "+hour+":"+min+":"+sec;
System.out.println("Entered string for date: " + strTmp);
     // Format 01/01/0070 15:24:14
     dateFormat = new SimpleDateFormat("dd/MM/yyyy HH:mm:ss");
     try
     outDate = dateFormat.parse(strTmp);
     System.out.println("Converted into Date(dd/MM/yyyy HH:mm:ss): " + dateFormat.format(outDate));
     catch(Exception e){ System.out.println("Exception in format 1: " + e);}
     // Format Jan 21, 2007
     dateFormat = new SimpleDateFormat("EEE, MMM d, ''yyyy");
     try
     outDate = dateFormat.parse(strTmp);
     System.out.println("Converted into Date(EEE, MMM d, ''yyyy): " + dateFormat.format(outDate));
     catch(Exception fe)
     {System.out.println("Exception in format 2: " + fe);}
public static void main(String args[]) {
          stringToDate dF = new stringToDate();
          dF.convertIntoDate();
}Following is the error message:
Entered string for date: 21/1/7 18:23:14
Converted into Date(dd/MM/yyyy HH:mm:ss): 21/01/0007 18:23:14
Exception in format 2: java.text.ParseException: Unparseable date: "21/1/7 18:23:14"
Now as per the above error message format one is working fine but format 2(// Format Jan 21, 2007) have some issues...kind suggest.
Edited by: vinee on Oct 2, 2008 4:23 AMPlease re-read my last reply.
Once again : see [http://java.sun.com/docs/books/tutorial/i18n/format/simpleDateFormat.html]
And your:
int year=07; // should be:
int year=2007;

Need help pulling data from an outside file into my array. Please help =)

Hi,
I need help adapting my array to read the interest rates from an outside file. Here is my code and the outside file I wrote. Please help. Oh, the array in question is on line 259, inside of my calculation() method.
Thanks...
import javax.swing.*;
import javax.swing.event.*;
import java.awt.*;
import java.awt.event.*;
import java.text.NumberFormat;
import java.text.DecimalFormat;
import java.io.*;
import javax.swing.JOptionPane;
public class Workshop5 extends JFrame implements ActionListener
     //declare gui components
     //declare labels
     JPanel contentPane = new JPanel();
     JPanel graphPane = new JPanel();
    JLabel instructionLabel = new JLabel();
    JLabel amountLabel = new JLabel();
     JLabel orLabel = new JLabel();
     JLabel comboBoxLabel = new JLabel();
     JLabel termLabel = new JLabel();
     JLabel rateLabel = new JLabel();
     JLabel calcLabel = new JLabel();
     JLabel paymentLabel = new JLabel();
     JLabel tableLabel = new JLabel();
     //declare font object
     Font labelFont = new Font("Tahoma", Font.PLAIN, 16);
     //declare text fields
     JTextField amountField = new JTextField(20);
     JTextField termField = new JTextField(20);
     JTextField rateField = new JTextField(20);
     JTextField paymentField= new JTextField(20);
     //declare combo box for loan selection
     JComboBox comboBox = new JComboBox();
    //declare button group and radio buttons
    ButtonGroup buttonGroup = new ButtonGroup();
    JRadioButton enterRadioButton = new JRadioButton("Enter amount, term, & rate", true);
    JRadioButton selectRadioButton = new JRadioButton("Select a preset term/rate loan", false);
     //declare button objects
     JButton clearButton = new JButton();
    JButton calcButton = new JButton();
    JButton quitButton = new JButton();
     //declare text area for amortization
     JTextArea amortTextArea = new JTextArea();
     JTextArea testTextArea = new JTextArea();
     //declare scroll bar for amortization table
     JScrollPane scrollPane = new JScrollPane(amortTextArea,ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS,ScrollPaneConstants.HORIZONTAL_SCROLLBAR_AS_NEEDED);
     public Workshop5()
          instructionLabel.setText("Choose one of the following payment calculation options:");
          instructionLabel.setFont(new Font("Tahoma",Font.PLAIN,16));
          //adds both buttons to button group
          buttonGroup.add(enterRadioButton);
          buttonGroup.add(selectRadioButton);
          enterRadioButton.setFont(labelFont);
          enterRadioButton.setBackground(Color.WHITE);
          enterRadioButton.setContentAreaFilled(false);
         enterRadioButton.addActionListener(this); //adds action listener to enter radio button
          orLabel.setText("OR");
          orLabel.setFont(new Font("Tahoma",Font.BOLD,18));
          selectRadioButton.setFont(labelFont);
          selectRadioButton.setBackground(Color.WHITE);
          selectRadioButton.setContentAreaFilled(false);
          selectRadioButton.addActionListener(this); //adds action listener to select radio button
          amountLabel.setText("Enter mortgage amount");
          amountLabel.setFont(new Font("Tahoma", Font.PLAIN,16));
          amountField.requestFocusInWindow();
          termLabel.setText("Enter term length in years:");
          termLabel.setFont(new Font("Tahoma", Font.PLAIN,14));
          rateLabel.setText("Enter interest rate:");
         rateLabel.setFont(new Font("Tahoma", Font.PLAIN,14));
            comboBoxLabel.setText("Select a loan:");
         comboBoxLabel.setFont(new Font("Tahoma", Font.PLAIN,14));
         comboBox.setBackground(new Color(255,255,255));
         comboBox.setFont(new Font("Tahoma", Font.PLAIN, 14));
         comboBox.setEnabled(false);
         ComboBox();
          calcLabel.setText("Press Calculate button to determine monthly payment.");
         calcLabel.setFont(new Font("Tahoma", Font.PLAIN, 16));
         calcButton.setText("Calculate");
         calcButton.setFont(new Font("Tahoma", Font.BOLD, 14));
         calcButton.addActionListener(this);
            //define monthly payment label
         paymentLabel.setText("Monthly payment:");
         paymentLabel.setFont(new Font("Tahoma", Font.PLAIN, 16));
         //define monthly payment text field
         paymentField.setFont(new Font("Tahoma", Font.BOLD,16));
         paymentField.setBackground(new Color(255,255,255));
         paymentField.setEditable(false);
          //define clear button
          clearButton.setText("Clear");
          clearButton.setFont(new Font("Tahoma", Font.BOLD,14));
          clearButton.addActionListener(this);
          //define quit button
          quitButton.setText("Quit");
          quitButton.setFont(new Font("Tahoma", Font.BOLD,14));
          quitButton.addActionListener(this);
          tableLabel.setText("Amoritization Table");
          tableLabel.setFont(new Font("Tahoma", Font.BOLD, 16));
          graphPane.setBackground(Color.WHITE);
          //add components to content
          getContentPane().add(contentPane);
          contentPane.setLayout(null);
          addComponent(contentPane, instructionLabel, 80,10,450,26);
          addComponent(contentPane, enterRadioButton, 30,40,220,30);
          addComponent(contentPane, orLabel, 280,40,100,30);
          addComponent(contentPane, selectRadioButton, 335,40,350,30);
          addComponent(contentPane, amountLabel, 100,80,220,26);
          addComponent(contentPane, amountField, 300,80,150,26);
          addComponent(contentPane, termLabel, 15,125,200,30);
          addComponent(contentPane, termField, 195,125,125,30);
          addComponent(contentPane, rateLabel, 62,160,200,30);
          addComponent(contentPane, rateField, 195,165,125,30);
          addComponent(contentPane, comboBoxLabel, 400,125,200,26);
          addComponent(contentPane, comboBox, 400,155,150,30);
          addComponent(contentPane, calcLabel, 100,200,400,30);
          addComponent(contentPane, calcButton, 250,240,100,30);
          addComponent(contentPane, paymentLabel, 150,285,200,30);
          addComponent(contentPane, paymentField, 300,285,100,30);
          addComponent(contentPane, clearButton, 100,330,100,30);
          addComponent(contentPane, quitButton, 400,330,100,30);
          addComponent(contentPane, tableLabel, 200,370,300,26);
          addComponent(contentPane, scrollPane, 10,400,450,360);
          addComponent(contentPane, graphPane, 475,400,305,360);
          //add window listener to close window when user presses X
          addWindowListener(new WindowAdapter()
               public void windowClosing(WindowEvent e)
                    System.exit(0);
         pack();
     //method to add components
     private void addComponent(Container container, Component c, int x, int y, int width, int height)
          c.setBounds(x, y, width, height);
          container.add(c);
     //action performed method
     public void actionPerformed(ActionEvent event)
          Object source = event.getSource();
          if (source == calcButton)
               Calculate();
          if (source == clearButton)
               Clear();
          if (source == quitButton)
               Exit();
          //defines active area based on user selection of mortgage calculation method
           //if user chooses to enter the mortgage manually, combo box fields are inactive
           if (source == enterRadioButton)
                comboBox.setEnabled(false);
                termField.setEnabled(true);
             termField.setEditable(true);
             rateField.setEnabled(true);
             rateField.setEditable(true);
             amountField.setText("");
               amountField.requestFocusInWindow();
               termField.setText("");
              rateField.setText("");
              paymentField.setText("");
              amortTextArea.setText("");
          //if user chooses to select from a preset mortgage, rate and term fields are inactive
          if (source == selectRadioButton)
               comboBox.setEnabled(true);
               termField.setEnabled(false);
               termField.setEditable(false);
               rateField.setEnabled(false);
               rateField.setEditable(false);
               amountField.setText("");
               amountField.requestFocusInWindow();
               termField.setText("");
               rateField.setText("");
               paymentField.setText("");
               amortTextArea.setText("");
     }//end of action performed method
     //combo box method
      public void ComboBox()
           String[] LoanArray = {" 7 years at 5.35 %", " 15 years at 5.50 %", " 30 years at 5.75 %"};
           for (int i = 0; i < LoanArray.length; i++)
                comboBox.addItem(LoanArray);
     }//end combo box method
     //calculation method
     void Calculate()
          //resets fields
          paymentField.setText("");
     amortTextArea.setText("");
          //calculation variables
     NumberFormat currency = NumberFormat.getCurrencyInstance();
          int [] termArray = {7, 15, 30};                               //array of years
               double [] yearlyInterestArray = {5.35, 5.5, 5.75};           //array of interest
               int totalMonths = 0;                                    //total months
               double Loan = 0.0;                               //amount of loan
               double MonthlyInterest = 0.0;                               //monthly interest rate
               double Payment = 0.0;                               //calculate payment
               double monthlyPayment = 0.0;                                   //calculate monthly payment
               double Interest = 0.0;                                              //variable for Interest Array input
               int Term = 0;                                              //variable for Term Array input
               double NewMonthlyInterest = 0.0;                               //new interest amount
               double NewLoan = 0.0;                               //new loan amount
               double Reduction = 0.0;                               //principle reduction
               //validate input
               try
                    Loan = Double.parseDouble(amountField.getText());
               catch (NumberFormatException e)
                    JOptionPane.showMessageDialog(null,"Invalid Entry. Please enter valid loan amount.", "Error", JOptionPane.WARNING_MESSAGE);
               //resets input fields after error message
          amountField.setText("");
          amountField.requestFocusInWindow();
               //if select button is chosen
          if (selectRadioButton.isSelected())
               int index = comboBox.getSelectedIndex();
               Term = termArray[index];
               Interest = yearlyInterestArray[index];
          //if user chooses to enter mortgage information
          else
               if (enterRadioButton.isSelected())
                    //validates input
          try
          Term = Integer.parseInt(termField.getText());
          catch (NumberFormatException e)
               JOptionPane.showMessageDialog(null,"Invalid entry. Please enter valid term length in years.", "Error",JOptionPane.WARNING_MESSAGE);
               //clears fields after error message
               termField.setText("");
               termField.requestFocusInWindow();
          try
               Interest = Double.parseDouble(rateField.getText());
          catch (NumberFormatException e)
               JOptionPane.showMessageDialog(null,"Invalid entry. Please enter valid rate (without percent symbol).","Error",JOptionPane.WARNING_MESSAGE);
          //clears fields after error message
          rateField.setText("");
                         rateField.requestFocusInWindow();
               //perform calculations
               if (Loan > 0)
                    Loan = Double.parseDouble(amountField.getText());
                    MonthlyInterest = (Interest / 12)/100;
                    totalMonths = Term * 12;
                    monthlyPayment = Loan * MonthlyInterest *(Math.pow((1 + MonthlyInterest), totalMonths)/(Math.pow((1 + MonthlyInterest), totalMonths)-1));
          paymentField.setText("" + currency.format(monthlyPayment));
                    //send information to amortization text area
               amortTextArea.append("Number\t");
               amortTextArea.append(" Amount\t");
               amortTextArea.append("Interest\t");
               amortTextArea.append("Principle\t");
               amortTextArea.append("Balance\n");
          NewLoan = Loan;
                    for (int i = 1; i <= totalMonths; i++)
                         NewMonthlyInterest = MonthlyInterest * NewLoan;
                         Reduction = monthlyPayment - NewMonthlyInterest;
                         NewLoan = NewLoan - Reduction;
                         amortTextArea.append(" " + i +"\t");
                         amortTextArea.append(" " + currency.format(monthlyPayment) + "\t");
                         amortTextArea.append(" " + currency.format(NewMonthlyInterest)+ "\t");
                         amortTextArea.append(" " + currency.format(Reduction) + "\t");
                         amortTextArea.append(" " + currency.format(NewLoan) + "\n");
                    //resets fields if loan amount is less than zero
                    if((Loan <= 0 || Term <= 0 || Interest <= 0))
                         paymentField.setText("");
                         amortTextArea.setText("");
     }//end calcualtion method
     //clear method
     void Clear()
          amountField.setText("");
          amountField.requestFocusInWindow();
          termField.setText("");
          rateField.setText("");
          paymentField.setText("");
          amortTextArea.setText("");
     }//end of clear method
     //main method
     public static void main(String args[])
          Workshop5 f = new Workshop5();
          f.setTitle("Carol's Mortgage Calculator");
          f.setBounds(200,100,800,800);
          f.setResizable(false);
          f.setVisible(true);
     }//end of main method
     //exit method
     void Exit()
          System.exit(0);
     }//end of exit method
}//program end
My data file is called: "InterestData.dat" and only contains the following text:
5.35, 5.5, 5.75

Ok, now I am getting this error message:
cannot resolve symbol method lenght()
Please help me out here, this is due tomorrow and I've been killing myself on it...
attaching program with revised code included, see beginning of calculation method line 250:
import javax.swing.*;
import javax.swing.event.*;
import java.awt.*;
import java.awt.event.* ;
import java.text.NumberFormat;
import java.text.DecimalFormat;
import java.io.*;
import javax.swing.JOptionPane;
public class Workshop5 extends JFrame implements ActionListener
     //declare gui components
    //declare labels
    JPanel contentPane = new JPanel();
     JPanel graphPane = new JPanel();
     JLabel instructionLabel = new JLabel();
        JLabel amountLabel = new JLabel();
    JLabel orLabel = new JLabel();
    JLabel comboBoxLabel = new JLabel();
    JLabel termLabel = new JLabel();
    JLabel rateLabel = new JLabel();
    JLabel calcLabel = new JLabel();
    JLabel paymentLabel = new JLabel();
    JLabel tableLabel = new JLabel();
    //declare font object
    Font labelFont = new Font("Tahoma", Font.PLAIN, 16);
    //declare text fields
    JTextField amountField = new JTextField(20);
    JTextField termField = new JTextField(20);
    JTextField rateField = new JTextField(20);
    JTextField paymentField= new JTextField(20);
    //declare combo box for loan selection
    JComboBox comboBox = new JComboBox();
        //declare button group and radio buttons
        ButtonGroup buttonGroup = new ButtonGroup();
        JRadioButton enterRadioButton = new JRadioButton("Enter amount, term, & rate", true);
        JRadioButton selectRadioButton = new JRadioButton("Select a preset term/rate loan", false);
    //declare button objects
    JButton clearButton = new JButton();
        JButton calcButton = new JButton();
        JButton quitButton = new JButton();
    //declare text area for amortization
    JTextArea amortTextArea = new JTextArea();
    JTextArea testTextArea = new JTextArea();
    //declare scroll bar for amortization table
    JScrollPane scrollPane = new JScrollPane(amortTextArea, ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS,ScrollPaneConstants.HORIZONTAL_SCROLLBAR_AS_NEEDED);
     public Workshop5()
         instructionLabel.setText("Choose one of the following payment calculation options:");
        instructionLabel.setFont(new Font("Tahoma",Font.PLAIN,16));
        //adds both buttons to button group
        buttonGroup.add(enterRadioButton);
        buttonGroup.add (selectRadioButton);
        enterRadioButton.setFont(labelFont);
        enterRadioButton.setBackground(Color.WHITE);
        enterRadioButton.setContentAreaFilled(false);
        enterRadioButton.addActionListener(this); //adds action listener to enter radio button
        orLabel.setText("OR");
        orLabel.setFont(new Font("Tahoma",Font.BOLD,18));
        selectRadioButton.setFont(labelFont);
        selectRadioButton.setBackground(Color.WHITE);
        selectRadioButton.setContentAreaFilled(false);
        selectRadioButton.addActionListener (this); //adds action listener to select radio button
          amountLabel.setText("Enter mortgage amount");
        amountLabel.setFont(new Font("Tahoma", Font.PLAIN,16));
        amountField.requestFocusInWindow();
        termLabel.setText("Enter term length in years:");
        termLabel.setFont(new Font("Tahoma", Font.PLAIN,14));
        rateLabel.setText("Enter interest rate:");
        rateLabel.setFont(new Font("Tahoma", Font.PLAIN,14));
        comboBoxLabel.setText("Select a loan:");
        comboBoxLabel.setFont(new Font("Tahoma", Font.PLAIN,14));
        comboBox.setBackground(new Color(255,255,255));
        comboBox.setFont(new Font("Tahoma", Font.PLAIN, 14));
        comboBox.setEnabled(false);
        ComboBox();
        calcLabel.setText("Press Calculate button to determine monthly payment.");
        calcLabel.setFont(new Font("Tahoma", Font.PLAIN, 16));
        calcButton.setText("Calculate");
        calcButton.setFont(new Font("Tahoma", Font.BOLD, 14));
        calcButton.setBackground(new Color(202,255,112));
        calcButton.addActionListener(this);
        //define monthly payment label
        paymentLabel.setText("Monthly payment:");
        paymentLabel.setFont(new Font("Tahoma", Font.PLAIN, 16));
        //define monthly payment text field
        paymentField.setFont (new Font("Tahoma", Font.BOLD,16));
        paymentField.setBackground(new Color(255,255,255));
        paymentField.setEditable(false);
          //define clear button
        clearButton.setText("Clear");
        clearButton.setFont(new Font("Tahoma", Font.BOLD,14));
        clearButton.setBackground(new Color(202,255,112));
        clearButton.addActionListener(this);
        //define quit button
        quitButton.setText("Quit");
        quitButton.setFont(new Font("Tahoma", Font.BOLD,14));
        quitButton.setBackground(new Color(202,255,112));
        quitButton.addActionListener(this);
          //define label for amortization table
        tableLabel.setText ("Amoritization Table");
          tableLabel.setFont(new Font("Tahoma", Font.BOLD, 16));
        graphPane.setBackground(Color.WHITE);
        //add components to content
        getContentPane().add(contentPane);
        contentPane.setLayout(null);
          addComponent(contentPane, instructionLabel, 80,10,450,26);
        addComponent(contentPane, enterRadioButton, 30,40,220,30);
        addComponent(contentPane, orLabel, 280,40,100,30);
        addComponent(contentPane, selectRadioButton, 335,40,350,30);
        addComponent(contentPane, amountLabel, 100,80,220,26);
        addComponent(contentPane, amountField, 300,80,150,26);
        addComponent(contentPane, termLabel, 15,125,200,30);
        addComponent(contentPane, termField, 195,125,125,30);
        addComponent(contentPane, rateLabel, 62,160,200,30);
        addComponent(contentPane, rateField, 195,165,125,30);
        addComponent(contentPane, comboBoxLabel, 400,125,200,26);
        addComponent(contentPane, comboBox, 400,155,150,30);
        addComponent(contentPane, calcLabel, 100,200,400,30);
        addComponent(contentPane, calcButton, 250,240,100,30);
        addComponent(contentPane, paymentLabel, 150,285,200,30);
        addComponent(contentPane, paymentField, 300,285,100,30);
        addComponent(contentPane, clearButton, 100,330,100,30);
        addComponent(contentPane, quitButton, 400,330,100,30);
        addComponent(contentPane, tableLabel, 200,370,300,26);
        addComponent(contentPane, scrollPane, 10,400,450,360);
        addComponent(contentPane, graphPane, 475,400,305,360);
        //add window listener to close window when user presses X
        addWindowListener(new WindowAdapter()
             public void windowClosing(WindowEvent e)
                  System.exit(0);
        pack();
       //method to add components
       private void addComponent(Container container, Component c, int x, int y, int width, int height)
               c.setBounds(x, y, width, height);
               container.add(c);
       //action performed method
       public void actionPerformed(ActionEvent event)
               Object source = event.getSource();
               if (source == calcButton)
                       Calculate();
               if (source == clearButton)
                       Clear();
               if (source == quitButton)
                       Exit();
               //defines active area based on user selection of mortgage calculation method
               //if user chooses to enter the mortgage manually, combo box fields are inactive
               if (source == enterRadioButton)
                       comboBox.setEnabled(false);
                       termField.setEnabled(true);
               termField.setEditable(true);
               rateField.setEnabled(true);
               rateField.setEditable(true);
               amountField.setText ("");
                       amountField.requestFocusInWindow();
                       termField.setText("");
                   rateField.setText("");
                   paymentField.setText ("");
                   amortTextArea.setText("");
               //if user chooses to select from a preset mortgage, rate and term fields are inactive
               if (source == selectRadioButton)
                       comboBox.setEnabled(true);
                       termField.setEnabled(false);
                       termField.setEditable(false);
                       rateField.setEnabled (false);
                       rateField.setEditable(false);
                       amountField.setText("");
                       amountField.requestFocusInWindow();
                       termField.setText ("");
                       rateField.setText("");
                       paymentField.setText("");
                       amortTextArea.setText("");
       }//end of action performed method
       //combo box method
        public void ComboBox()
               String[] LoanArray = {" 7 years at 5.35 %", " 15 years at 5.50 %", " 30 years at 5.75 %"};
               for (int i = 0; i < LoanArray.length; i++)
                       comboBox.addItem(LoanArray);
}//end combo box method
//calculation method
     void Calculate()
          //resets fields
          paymentField.setText("");
          amortTextArea.setText("");
          //calculation variables
          NumberFormat currency = NumberFormat.getCurrencyInstance();
          //declare input stream object
          InputStream istream;
          //create a file object to refer to the outside file
          File interestData = new File("InterestFile.dat");
          //assign instream to the new file object
          istream = new FileInputStream(interestData);
          try
               StringBuffer sb = new StringBuffer();
               BufferedReader in = new BufferedReader(new FileReader(interestData));
               String line = "";
               while((line = in.readLine()) != null)
                    sb.append(line);
               in.close();
               String fileData = sb.toString();
               String[] splitData = fileData.split(", ");
               double [] yearlyInterestArray = new double[splitData.length()];
               for(int j = 0; j < splitData.length(); j++)
                    yearlyInterestArray[j] = new Double(splitData[j]).doubleValue();
          catch (IOException e)
               JOptionPane.showMessageDialog(null, "File does not exist." + e.getMessage());
          int [] termArray = {7, 15, 30}; //array of years
          double [] yearlyInterestArray = { 5.35, 5.5, 5.75}; //array of interest
          int totalMonths = 0; //total months
          double Loan = 0.0; //amount of loan
          double MonthlyInterest = 0.0; //monthly interest rate
          double Payment = 0.0; //calculate payment
double monthlyPayment = 0.0; //calculate monthly payment
double Interest = 0.0; //variable for Interest Array input
int Term = 0; //variable for Term Array input
double NewMonthlyInterest = 0.0; //new interest amount
double NewLoan = 0.0; //new loan amount
double Reduction = 0.0; //principle reduction
//validate input
try
     Loan = Double.parseDouble(amountField.getText());
catch (NumberFormatException e)
     JOptionPane.showMessageDialog(null,"Invalid Entry. Please enter valid loan amount.", "Error", JOptionPane.WARNING_MESSAGE);
//resets input fields after error message
amountField.setText("");
amountField.requestFocusInWindow ();
          //if select button is chosen
          if (selectRadioButton.isSelected())
               int index = comboBox.getSelectedIndex ();
               Term = termArray[index];
               Interest = yearlyInterestArray[index];
          //if user chooses to enter mortgage information
          else
               if (enterRadioButton.isSelected())
          //validates input
          try
               Term = Integer.parseInt(termField.getText());
catch (NumberFormatException e)
     JOptionPane.showMessageDialog(null,"Invalid entry. Please enter valid term length in years.", "Error",JOptionPane.WARNING_MESSAGE);
     //clears fields after error message
     termField.setText("");
     termField.requestFocusInWindow();
try
     Interest = Double.parseDouble(rateField.getText());
catch (NumberFormatException e)
     JOptionPane.showMessageDialog(null,"Invalid entry. Please enter valid rate (without percent symbol).","Error",JOptionPane.WARNING_MESSAGE);
     //clears fields after error message
     rateField.setText("");
     rateField.requestFocusInWindow();
          //perform calculations
          if (Loan > 0)
               Loan = Double.parseDouble(amountField.getText ());
               MonthlyInterest = (Interest / 12)/100;
               totalMonths = Term * 12;
               monthlyPayment = Loan * MonthlyInterest *(Math.pow ((1 + MonthlyInterest), totalMonths)/(Math.pow((1 + MonthlyInterest), totalMonths)-1));
paymentField.setText("" + currency.format(monthlyPayment));
//send information to amortization text area
amortTextArea.append("Number\t");
amortTextArea.append(" Amount\t");
amortTextArea.append("Interest\t");
amortTextArea.append("Principle\t");
amortTextArea.append("Balance\n");
               NewLoan = Loan;
               for (int i = 1; i <= totalMonths; i++)
     NewMonthlyInterest = MonthlyInterest * NewLoan;
     Reduction = monthlyPayment - NewMonthlyInterest;
     NewLoan = NewLoan - Reduction;
     amortTextArea.append(" " + i +"\t");
     amortTextArea.append (" " + currency.format(monthlyPayment) + "\t");
     amortTextArea.append(" " + currency.format(NewMonthlyInterest)+ "\t");
     amortTextArea.append(" " + currency.format(Reduction) + "\t");
     amortTextArea.append(" " + currency.format(NewLoan) + "\n");
//resets fields if loan amount is less than zero
if((Loan <= 0 || Term <= 0 || Interest <= 0))
     paymentField.setText("");
     amortTextArea.setText("");
     }//end calcualtion method
//clear method
void Clear()
amountField.setText("");
amountField.requestFocusInWindow();
termField.setText("");
rateField.setText("");
paymentField.setText("");
amortTextArea.setText("");
}//end of clear method
//main method
public static void main(String args[])
Workshop5 f = new Workshop5();
f.setTitle("Carol's Mortgage Calculator");
f.setBounds(200,100,800,800);
f.setResizable(false);
f.setVisible(true);
}//end of main method
//exit method
void Exit()
System.exit(0);
}//end of exit method
}//program end

Need Help importing data using PHP to convert it into a single HTML line

Hi, My names Chance
I'm a 2nd year web design student and have been assigned a project by my teacher for a charity website
i found a tutorial of exactly what i need to do but im stuck on creating a script to import and convert php data
to a single html line
heres the link to the the script, if you scroll down to the bottom
where it says
RSS or XML Data Source
"The scrolling text can be imported from any source: RSS, XML or any other format.
For example, if you want to import data using PHP to convert it into a single HTML line to be displayed by the ticker, create a php script to import and convert the data, and include it directly in the DIV tag as follow"
this is what i need help doing
http://www.mioplanet.com/rsc/newsticker_javascript.htm
i already have the php code that i want to import
i just need to know how to import and convert my php script so im able
to make the the javascript from the link i provided to work
thank you so much for your time
if you have any question or answer please email me
[email protected]
thanks again hope to here from you soon

Hi
The instructions are there on the page you provided a link to!
What is it you do not understand?
PZ
www.pziecina.com

Need help in date conversion(it's Urgent)

Similar Messages

Maybe you are looking for