Need help in exporting report output
Hi ,
I have a sql report. I am trying to export the result out of report into excel or csv, I haven't able to do so. I have enabled the csv export and print attribute, but no luck so far.
http://apex.oracle.com/pls/otn/f?p=42530:13:1118371086830313:::::
workspace : edw_apex
user : manish
password : manish
Application Name : Application 42530
Any help please.
Thanks,
Manish
Gordan
Thanks for your input. My problem is that I am able to export the data from report but few highlighted cells are missing. i have noticed that the cells which are bold in the reports are missing, except that everything works fine.
--Manish
Similar Messages
-
hi friends i need help on classical reports,
sold-party,
material
sales and distrubitutation channel ,division,
incoming orders,order number,invoice ,credit,
i need sub totals and final total of invoice and each customer should display in new page .Hi
Use the Tables KNA1,VBAk,VBAP,VBRK and VBRP and design the report
see the sample report using KNA1,VBAK and VBAP.
REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
HEADING.
*TABLES DECLARATION
TABLES : KNA1, VBAK, VBAP.
*SELECT OPTIONS
SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
*INITIALIZATION
INITIALIZATION.
CUST_NO-LOW = '01'.
CUST_NO-HIGH = '5000'.
CUST_NO-SIGN = 'I'.
CUST_NO-OPTION = 'BT'.
APPEND CUST_NO.
*SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN ON CUST_NO.
LOOP AT SCREEN.
IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
MESSAGE E001(ZTJ1).
ENDIF.
ENDLOOP.
*BASIC LIST SELECTION
START-OF-SELECTION.
SELECT KUNNR NAME1 ORT01 LAND1 INTO
(KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
FROM KNA1
WHERE KUNNR IN CUST_NO.
WRITE:/1 SY-VLINE,
KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
KNA1-NAME1 UNDER 'NAME',
61 SY-VLINE,
KNA1-ORT01 UNDER 'CITY',
86 SY-VLINE,
KNA1-LAND1 UNDER 'COUNTRY',
103 SY-VLINE.
HIDE: KNA1-KUNNR.
ENDSELECT.
ULINE.
*SECONDARY LIST ACCESS
AT user-command.
IF SY-UCOMM = 'IONE'.
PERFORM SALES_ORD.
ENDIF.
IF SY-UCOMM = 'ITWO'.
PERFORM ITEM_DET.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR 1.
WRITE : 'CUSTOMER DETAILS'.
FORMAT COLOR 1 OFF.
ULINE.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'NAME',
61 SY-VLINE,
63 'CITY',
86 SY-VLINE,
88 'COUNTRY',
103 SY-VLINE.
ULINE.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR SECONDARY LISTS
TOP-OF-PAGE DURING LINE-SELECTION.
*TOP OF PAGE FOR 1ST SECONDARY LIST
IF SY-UCOMM = 'IONE'.
ULINE.
FORMAT COLOR 1.
WRITE : 'SALES ORDER DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'SALES ORDER NO.',
40 SY-VLINE,
42 'DATE',
60 SY-VLINE,
62 'CREATOR',
85 SY-VLINE,
87 'DOC DATE',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR 2ND SECONDARY LIST
IF SY-UCOMM = 'ITWO'.
ULINE.
FORMAT COLOR 1.
WRITE : 'ITEM DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'SALES ORDER NO.',
40 SY-VLINE,
42 'SALES ITEM NO.',
60 SY-VLINE,
62 'ORDER QUANTITY',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*END OF PAGE
END-OF-PAGE.
ULINE.
WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
SY-PAGNO.
SKIP.
*& Form SALES_ORD
*& FIRST SECONDARY LIST FORM
FORM SALES_ORD .
SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
(VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
FROM VBAK
WHERE KUNNR = KNA1-KUNNR.
WRITE:/1 SY-VLINE,
VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
40 SY-VLINE,
VBAK-ERDAT UNDER 'DATE',
60 SY-VLINE,
VBAK-ERNAM UNDER 'CREATOR',
85 SY-VLINE,
VBAK-AUDAT UNDER 'DOC DATE',
103 SY-VLINE.
HIDE : VBAK-VBELN.
ENDSELECT.
ULINE.
ENDFORM. " SALES_ORD
*& Form ITEM_DET
*& SECOND SECONDARY LIST FORM
FORM ITEM_DET .
SELECT VBELN POSNR KWMENG INTO
(VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
FROM VBAP
WHERE VBELN = VBAK-VBELN.
WRITE : /1 SY-VLINE,
VBAP-VBELN UNDER 'SALES ORDER NO.',
40 SY-VLINE,
VBAP-POSNR UNDER 'SALES ITEM NO.',
60 SY-VLINE,
VBAP-KWMENG UNDER 'ORDER QUANTITY',
103 SY-VLINE.
ENDSELECT.
ULINE.
ENDFORM. " ITEM_DET
REPORT demo_list_at_pf.
START-OF-SELECTION.
WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
AT pf5.
PERFORM out.
AT pf6.
PERFORM out.
AT pf7.
PERFORM out.
AT pf8.
PERFORM out.
FORM out.
WRITE: 'Secondary List by PF-Key Selection',
/ 'SY-LSIND =', sy-lsind,
/ 'SY-UCOMM =', sy-ucomm.
ENDFORM.
After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
Secondary List by PF-Key Selection
SY-LSIND = 14
SY-UCOMM = PF06
Example for AT USER-COMMAND.
REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: 'Basic List',
/ 'SY-LSIND:', sy-lsind.
TOP-OF-PAGE.
WRITE 'Top-of-Page'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
WHEN 'TEST'.
WRITE 'Self-defined GUI for Function Codes'.
ULINE.
ENDCASE.
AT LINE-SELECTION.
SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
PERFORM out.
sy-lsind = sy-lsind - 1.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'FC1'.
PERFORM out.
WRITE / 'Button FUN 1 was pressed'.
WHEN 'FC2'.
PERFORM out.
WRITE / 'Button FUN 2 was pressed'.
WHEN 'FC3'.
PERFORM out.
WRITE / 'Button FUN 3 was pressed'.
WHEN 'FC4'.
PERFORM out.
WRITE / 'Button FUN 4 was pressed'.
WHEN 'FC5'.
PERFORM out.
WRITE / 'Button FUN 5 was pressed'.
ENDCASE.
sy-lsind = sy-lsind - 1.
FORM out.
WRITE: 'Secondary List',
/ 'SY-LSIND:', sy-lsind,
/ 'SY-PFKEY:', sy-pfkey.
ENDFORM.
When you run the program, the system displays the following basic list with a the page header defined in the program:
You can trigger the AT LINE-SELECTION event by double-clicking a line. The system sets the status TEST and deactivates the function code PICK. The status TEST contains function codes FC1 to FC5. These are assigned to pushbuttons in the application toolbar. The page header of the detail list depends on the status.
Here, double-clicking a line no longer triggers an event. However, there is now an application toolbar containing five user-defined pushbuttons. You can use these to trigger the AT USER-COMMAND event. The CASE statement contains a different reaction for each pushbutton.
For each interactive event, the system decreases the SY-LSIND system field by one, thus canceling out the automatic increase. All detail lists now have the same level as the basic list and thus overwrite it. While the detail list is being created, SY-LSIND still has the value 1.
Reward points for useful Answers
Regards
Anji -
How to export report output into excel.
Hi all
how to export report output into excel sheet can any on give me answer step by step please as soon as possible
kkHi Prashanth,
If you are executing Query from WAD ---> Right click on Table (only on Characteristics Data) --> Enhanced Menu ---> Export as --> CSV file or MS Excel
assign points if this helps,
Thanks,
Sudhakar -
Need to send the report output in email body.
Hi Friends,
I need to send the report output in body of the email but not as an attachment.
Requesting your suggestions. Please elaborated answers are expected.
Thanks & Regards,
S.Suresh Babu.If you are looking for same output to be available in the email body, i think this is not possible.
If you are just concentrated on the data, then you can do as below.
1. In your custom program, submit the actual report program via spool and by making use of that spool, read the spool content (We have function modules which can download the content from spool to the internal table), and by making use of this internal table, build the actual internal table as required which will be passed to email function module lets say SO_OBJECT_SEND etc..
2. You can make use of even LIST_TO_MEMORY and LIST_FROM_MEMORY function modules as well instead of spool, if you have data in the final internal table.
I am not sure, how can we handle in terms of logos if any.....or the data in the top of page related things...... -
Need help in export/import
Hello All,
I need help in export/import of an internal table (based on deep structure) to/from desktop either in excel or XML file.
I have an int table which has to be sent to desktop either in xls or xml file and then import back to an internal table(with deep structure).
Ex :
Int table is based on structure.
Structure has fields
as
f1 -
f2 -
f3 - table type
Your help will be appreciated.Hi Nishant,
Please put your question in below mention forum.
SAP Business One SDK
Thanks
Mohammad Imran -
Need help on Oracle Report format
Hi,
I need help on Oracle Reports. I am generating a report in excel sheet. I have a column which is 13 digit number (In database it is CHAR datatype). In excel sheet it showing some thing like 9.78381E+12. I want to show complete number like 9783805591331.
Also sometimes leading zero's are not showing when my column values is something like 0098794859583. I need to show the leading zero's as well in excel without losing them.
Below are the parameters i am using for the report
DESFORMAT=SPREADSHEET AND DESTYPE=FILE
My Oracle 9i developer version.
Any help on this would be much appreciated.
Thanks
KishoreAn additional quote string ' character with the number field will solve this problem but if u want to display this field in report then it will look ugly
'''||yourfield from table; check ur regional settings also
plz mark it helpful correct if it is -
Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c
Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c. I need assistance on connecting these together so I can run a report. I am not an IT person so if someone could dumb it down it would be great.
Thanks,
NBGHealthHello,
I assume GBS Agency Expert 6.7.6c is some sort of database or data source? If you have an ODBC driver then create or use a System DSN to the database. Then you can create a report using that DSN.
Otherwise I suggest you contact the makers of GBS Agency Expert 6.7.6c and ask them how to connect to the database.
Let them know CR is ANSII 92 ODBC 3 compliant.
Thank you
Don -
Need help in dynamic report for a range of year and period
Dear all,
I need help in creating an ALV report with dynamic columns based on the Year and period entered on the selection screen. for example if in the year we enter 2002 and period range from 10 to 12 then we should get the 3 columns display for cost(example) for period 10/2002, 11/2002 and 12/2002.
Can anyone help me in achieving this dynamically since the user can enter the year also in intervals along with the period and data also needs to be populated in the corresponding columns.
An example code would be of great help.
Thanks,
AmitHi,
Use field symbols as follows.
TYPE-POOLS : SLIS.
TABLES : MARC,T001W.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARC-MATNR,
END OF ITAB.
DATA : FIELDSTAB TYPE LVC_T_FCAT,
STAB TYPE LVC_S_FCAT,
T_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
S_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
NEW_LINE TYPE REF TO DATA,
NEW_TABLE TYPE REF TO DATA,
INDEX(3) TYPE C,
STR(70),
TEXT(6),
CNT(1),
TEXT1(16),
REPID LIKE SY-REPID.
FIELD-SYMBOLS : <FS> TYPE STANDARD TABLE,
<WA> TYPE ANY.
SELECT-OPTIONS : S_WERKS FOR MARC-WERKS NO INTERVALS,
S_MATNR FOR MARC-MATNR NO INTERVALS.
INITIALIZATION.
REPID = SY-REPID.
START-OF-SELECTION.
SELECT * FROM MARC
INTO CORRESPONDING FIELDS OF TABLE ITAB
WHERE MATNR IN S_MATNR
AND WERKS IN S_WERKS.
SORT ITAB BY MATNR.
DELETE ADJACENT DUPLICATES FROM ITAB COMPARING MATNR.
STAB-FIELDNAME = 'MATNR'.
STAB-DATATYPE = 'CHAR'.
STAB-INTLEN = '18'.
APPEND STAB TO FIELDSTAB.
CLEAR CNT.
LOOP AT S_WERKS.
CLEAR TEXT.
CNT = CNT + 1.
CONCATENATE 'EISLO' CNT INTO TEXT.
STAB-FIELDNAME = TEXT.
STAB-DATATYPE = 'CHAR'.
STAB-INTLEN = '16'.
APPEND STAB TO FIELDSTAB.
CLEAR S_WERKS.
ENDLOOP.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = FIELDSTAB
IMPORTING
EP_TABLE = NEW_TABLE.
ASSIGN NEW_TABLE->* TO <FS>.
CREATE DATA NEW_LINE LIKE LINE OF <FS>.
ASSIGN NEW_LINE->* TO <WA>.
PERFORM MOVE_DATA.
CLEAR S_FIELDCAT.
S_FIELDCAT-FIELDNAME = 'MATNR'.
S_FIELDCAT-TABNAME = ITAB.
S_FIELDCAT-SELTEXT_M = 'Part Number'.
S_FIELDCAT-NO_ZERO = 'X'.
S_FIELDCAT-DDICTXT = 'M'.
APPEND S_FIELDCAT TO T_FIELDCAT.
CLEAR CNT.
LOOP AT S_WERKS.
CLEAR T001W.
CNT = CNT + 1.
SELECT SINGLE * FROM T001W WHERE WERKS = S_WERKS-LOW AND SPRAS = SY-LANGU.
CLEAR TEXT.
CONCATENATE 'EISLO' CNT INTO TEXT.
S_FIELDCAT-FIELDNAME = TEXT.
S_FIELDCAT-SELTEXT_M = T001W-NAME2.
S_FIELDCAT-NO_ZERO = 'X'.
S_FIELDCAT-DDICTXT = 'M'.
APPEND S_FIELDCAT TO T_FIELDCAT.
CLEAR S_WERKS.
ENDLOOP.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
IT_FIELDCAT = T_FIELDCAT[]
TABLES
T_OUTTAB = <FS>.
*& Form MOVE_DATA
text
FORM MOVE_DATA.
LOOP AT ITAB.
CLEAR STR.
CONCATENATE ITAB-MATNR ' ' INTO STR SEPARATED BY SPACE.
LOOP AT S_WERKS.
CLEAR MARC.
SELECT SINGLE * FROM MARC WHERE MATNR = ITAB-MATNR AND WERKS = S_WERKS-LOW.
IF SY-SUBRC EQ 0.
CLEAR TEXT1.
TEXT1 = MARC-EISLO.
CONCATENATE STR TEXT1 INTO STR SEPARATED BY SPACE.
ELSE.
CONCATENATE STR '0' INTO STR SEPARATED BY SPACE.
ENDIF.
ENDLOOP.
<WA> = STR.
APPEND <WA> TO <FS>.
CLEAR ITAB.
ENDLOOP.
ENDFORM. "MOVE_DATA
Reward points if helpful.
Regards,
Sankar.. -
How to export report output into excel file
hi friends,
i would like to get the solution from you for how to export the report output into a .xls file. i know how to convert it into .rtf and .txt files but i think it's difficult to do this .xls way, could you help me to comeover this problem?
thankyou very much.The official answer is "delimited", which
generates adequate comma or other delimited
text. No formatting, and without extra
effort no support for non-ASCII characters.
Might be sufficient for you.
Note that Excel can read html files - we
built programs to generate html files with
name of "blah.xls" and some Excel-ish
extensions, so Excel is automatically opened
and the document is all nice and pretty.
(Oracle html output has some odd logic about
choosing number of columns, we didn't use
it.)
-- Allan Plum -
Export report output to PDF automatically/silently.
Hello,
We want to export silently a crystal report output (version XI R2) to pdf format.
We currently invoke crystal reports from our Oracle Webforms (10g) and the output is then shown via an url with the viewrpt.cwr program. This works perfect.
But as already mentioned we we want to omit the user interaction for a couple of reports.
Is there a command line version of viewrpt.cwr so that we can print a report to a specific path and file name (the path and name will be programmatically derived)?
Or maybe on the otherhand can someone give me some clues where to start. I get a feeling i need to program something myself in .Net or Java to get this working, i hope not i would thimk that these things are out of the box functionality.
Thank you
Auke QuistHi Aasavari Bhave
Yes, i know this option. But it did not work for me...
I invoked the follwoing command:
http://nldev004/businessobjects/viewrpt.cwr?id=95119
&apsuser=cce_ont_usr
&apspassword=***
&apsauthtype=secEnterprise
&cmd=EXPORT
&EXPORT_FMT=U2FPDF%3A0
&promptex-p_PREFACE="FALSE"
&promptex-p_IVE_CORRECTION="N"
&promptex-p_BPD_YEAR="2011"
&promptex-p_BPD_CODE="3"
&promptex-p_BPD_START_DATE="28-02-2011"
&promptex-p_BPD_END_DATE="28-03-2011"
&promptex-p_IVE_FORMAT="CUS"
&promptex-p_WT_CUR="GBP"
&promptex-p_language="ENG"
&promptex-p_user="CCE"
&promptex-p_system="Circle%20T%20E-invoicing"
&promptex-p_release="2.5.5.4%20SVY/BKR/WDC%20Development"
&connect=1
Problem was that the browser was launched showing an Adobe Reader informational messagebox with the text File does not begin with '%PDF-'.
But anyway, even if i get this working i still have an issue, the functionality i want is that it is exported silently. We do not want to launch 50 or more url's with invoices when the user is closing a financial period.
Edited by: A. Quist on May 9, 2011 4:23 PM -
I need help with export settings
Hi everyone,
I need help outputting an HD file for presenting a video to a client. I have tried exporting to HD .mov (H.264 codec) and PE keeps crashing (error compiling movie). From what I’ve read here, it’s due to the gargantuan file QT creates and HD space (even though I think I have enough HD available).
So, I need a recommendation from you on what kind of file to output which will allow me to present the movie to the client in HD. This file is solely for the presentation, I have already published for web (FLV) and YouTube (direct share from PE) and they both worked fine.
Here are my project specs:
Timeline: 4:26
Format: 1920 X 1080 HD
Timebase: 29.97 frames per second
OS: Windows XP SP3
Processor: Intel Core 2 Duo @ 2.66GHz
RAM: 4GB
Project Drive: 250GB disk with 152GB free space internal dedicated project drive (separate from OS)
Thanks in advance for your help,
JoseHi Steve, Neale,
I wanted to follow-up on this post. I came into the office today to run a few tests so I can make sure that I have the correct settings on my camera and PE project for the next time around. Here are few observations I was wondering if you can comment on:
My Sony camera cannot shoot HDV. The only format it supports is AVCHD, so I'm stuck converting.
I tried to convert the footage I have to HDV with the software I have (AVS Video Converter and Koyote Soft HD Converter) and neither of the two have an "HDV" conversion setting. I see AVI, MPEG, MOV and many different settings in each (AVI: Hd Video 1080p: H.264AVC, 29.97fps, 4200kbps, Audio MP3, 256 kbps or MPEG: HD Video 1080p - MPEG2, 15000 kbps, 1920X1080, 29.97fps, etc). What should I be looking for?
I searched for "best file format" in the forum and found various postings from both of you referring to converting to DV-AVI within PE; especially if you have AVCHD footage (which I have). So, I followed directions and converted a file for testing. Then, I created a new project using HDV 1080i 30 settings and imported the converted file. I still get a red line on the timeline. Any thoughts on what I'm doing wrong?
I also converted the MOV files (shot in HDV 60i with the pro camera) to DV-AVI. I also get a red line on the timeline...
The DV-AVI converted footage (both cases) doesn't appear to be HD. It looks jagged on the preview window. Is it HD?
The DV-AVI converted footage is almost double the file size as the MTS (AVCHAD) file (138mb vs. 60mb). Isn't that going to make PE run slower?
Thanks in advance for your help. I just wanna make sure I do my homework now so I set everything up correctly on the next project.
Jose
P.S. I almost forgot! Here's the link to the live video on YouTube: http://www.youtube.com/watch?v=fEkqPmefJV0
Message was edited by: josejb70 - Added YouTube link -
Need help adobe bridge cc output module
I need help. I have an assignment I'm held up on completing because the adobe cc bridge does not have the output modue I need. I followed the adobe instructions page to the letter. I copied and pasted the output module folder to the adobe bridge cc extensions folder in programs/commonfiles/adobe. The only thing is the instructions then say to paste the workspace file into the workspace folder located below the bridge extensions folder. I don't have a workspaces folder there or anywhere. I even tried must making one and adding the file to it, but no go. can someone PLEASE help me with this? I have an assignment due like now that requires the use of the output modue.thanks!
oh,my system is windows 8.1. sorry, lol.
-
Need Help XML Publisher Report
Hi Friends
I need to generate a report in xml publisher responsibility .
I have create and designed the RTF file using word , And i have genetared an XML file(template )
I have some doubt please clarify by doubts
In RTF template i have some 4columns
For EXample i Give some column name
Invoice Number , Invoice Line Number ,Tax Type ,Tax Code Name etc....
In my RTF I have done like this
I have created two 2 row and 4column
In the 1st row i have all the 4 column heading
In the 2nd row i have done like this
Developer tab> Design mode > In the legacy tool i have selected text Form field
Once i double click the text form field in the default text i have Given C1 Then in the Add help text button i have given <?C_INVOICE_NUMBER?> like this i have done for alls the columns
My RTF design is completed
Now i need load the XML is it?
In the XMl data query i have placed my sql statement
Here my doubt starts
wether all the column in the RTF should be in the XML sql statement ha?
2)In the top of my RTF i need to add date and page No how to add that ?
Thanks In advance
ATHi Friend
Iam saying this is my XML file
<LIST_G_TAX_NAME>
<G_TAX_NAME>
<C_SORT_TAX_NAME>USE TAX</C_SORT_TAX_NAME>
<C_TAX_NAME>Use Tax</C_TAX_NAME>
<C_TAX_RATE>8.25</C_TAX_RATE>
<C_TAX_TYPE>USE</C_TAX_TYPE>
<C_PERIOD_NAME>OCT-11</C_PERIOD_NAME>
<LIST_G_VENDOR>
<G_VENDOR>
<C_SORT_VENDOR_NAME/>
<C_SORT_SITE_CODE/>
<C_VENDOR_ID>851</C_VENDOR_ID>
<C_VENDOR_NAME>ORACLE CORPORATION</C_VENDOR_NAME>
<C_SITE_CODE>CHICAGO</C_SITE_CODE>
<LIST_G_INVOICE>
<G_INVOICE>
<C_INVOICE_DATE>17-OCT-11</C_INVOICE_DATE>
<C_SORT_INVOICE_NUMBER>1308</C_SORT_INVOICE_NUMBER>
<C_INVOICE_ID>350889</C_INVOICE_ID>
<C_INVOICE_NUMBER>1308</C_INVOICE_NUMBER>
<C_INVOICE_LINE_NUMBER>1</C_INVOICE_LINE_NUMBER>
<C_PO_NUMBER>256388</C_PO_NUMBER>
<C_DESCRIPTION>TEST</C_DESCRIPTION>
<C_GL_DATE>17-OCT-11</C_GL_DATE>
<C_INVOICE_LINE_AMOUNT>15</C_INVOICE_LINE_AMOUNT>
<C_CHARGE_ACCOUNT>412.00.6410.7831.1076.1001.00.000.0000</C_CHARGE_ACCOUNT>
<C_LIABILITY_ACCOUNT>412.00.0000.2152.1208.1001.00.000.0000</C_LIABILITY_ACCOUNT>
<C_BATCH_NAME>101711</C_BATCH_NAME>
<C_SITE_CODE2>CHICAGO</C_SITE_CODE2>
<C_INVOICE_AMOUNT>15</C_INVOICE_AMOUNT>
<LIST_G_DIST>
<G_DIST>
<C_INVOICE_TAX_ID>10061</C_INVOICE_TAX_ID>
<C_LINE_TYPE>ITEM</C_LINE_TYPE>
</G_DIST>
</LIST_G_DIST>
<C_TAXABLE_AMOUNT>15</C_TAXABLE_AMOUNT>
<C_TAX_AMOUNT>1.24</C_TAX_AMOUNT>
<C_INVOICE_AMOUNT_DISP> 15.00 </C_INVOICE_AMOUNT_DISP>
<C_TAXABLE_AMOUNT_DISP> 15.00 </C_TAXABLE_AMOUNT_DISP>
<C_TAX_AMOUNT_DISP> 1.24 </C_TAX_AMOUNT_DISP>
</G_INVOICE>
</LIST_G_INVOICE>
<C_INVOICE_SITE_SUM>124.9</C_INVOICE_SITE_SUM>
<C_INVOICE_SITE_SUM_DISP> 124.90 </C_INVOICE_SITE_SUM_DISP>
<C_TAX_SITE_SUM>5.4</C_TAX_SITE_SUM>
<C_TAX_SITE_SUM_DISP> 5.40 </C_TAX_SITE_SUM_DISP>
<C_TAXABLE_SITE_SUM>65.66</C_TAXABLE_SITE_SUM>
<C_TAXABLE_SITE_SUM_DISP> 65.66 </C_TAXABLE_SITE_SUM_DISP>
</G_VENDOR>
</LIST_G_VENDOR>
<C_OLD_VENDOR_ID>0</C_OLD_VENDOR_ID>
<C_INVOICE_SUM>124.9</C_INVOICE_SUM>
<C_INVOICE_SUM_DISP> 124.90 </C_INVOICE_SUM_DISP>
<C_TAX_SUM>5.4</C_TAX_SUM>
<C_TAX_SUM_DISP> 5.40 </C_TAX_SUM_DISP>
<C_TAXABLE_SUM>65.66</C_TAXABLE_SUM>
<C_TAXABLE_SUM_DISP> 65.66 </C_TAXABLE_SUM_DISP>
</G_TAX_NAME>
</LIST_G_TAX_NAME>
And if i need all the column to be displayed in my report
1)Invoice Number
2)Invoice Line Number
3)Tax Type
4)Tax Code Name
5)Tax Rate Percent
6)Supplier Name
7)Description
8)Gl Date
9)Invoive Line Amount
10)Taxable Line Amount
11)Tax Liability
12)Po Number
13)Charge Account
14)Liability Account
Which tag do i need to use fro grouping
For ex
Instead of this <?for-each:G_TAX_NAME?> <?end for-each?>
which one i need to use
Please help
Thanks
AT -
Hi Experts,
I have created the XML report which will generate the output in EXCEL format. I have used the template(rtf) to generate the output. I am facing the critical issue the output file (excel) is giving output with headings( ex: empno,ename,job..)even if there is no record count in the query.
But some times it gives the empty file(excel) without the heading information if the record count is zero.
Could anyone suggest me to solve this error.
Any solution or link will be great help for me. Waiting for your valueable reply
Thanks in Advance,
Ravi.Hi,
Please see if this thread helps.
XML publisher output report in excel format
Re: XML publisher output report in excel format
Regards,
Hussein -
Hi All,
Iam having one pivot report output i want sort by column in dashboard
if it is table output then we have option to sort by column in dashboard
Is this possible to sort by column in pivot output
Please help me
Thanks in AdvanceYou have to design in answers!
In RESULT you can configer:
Enable column sorting in Dashboards = true/false
Regards,
Stefan Hess
Maybe you are looking for
-
Problem with ana 3.6 Installation on solaris 10
Hi, I'm going to install Cisco Ana 3.6.5 on Solaris 10 and this is my first experience. here are the information about my installation: OS: Solaris 10 64-bit Oracle 10g 10.2.0.3 I have installed Oracle and now when i try to install ana gateway , i ge
-
This happens every time I do a Google search.
-
The window of iTunes updater popped up and I accedently only downloaded the iTunes and not iCloud thing and Quicktime player. Any ideas how I can download them now?
-
Black and White monitor adaptor for connection to a G3 Blue and White?
Hi, I have a Blue and White G3 Power mac and I also have a black and white G4 with a matching flat screen. Is there an adaptor available which allows me to connect my blue and white G3 to my black and white screen?
-
I share my podcast with iWeb, but when I visit the site the podcast doesn't show. It only shows with a broken quicktime logo, and won't play (obviously). I've installed the latest version of quicktime, and haven't found how to fix it. What can I do t