Need help in getting access with phone Addressbook

Hi,
I am developing a application that desires to get access with the existing phone address book.
Q1) I found that JSR 75 will help.I think i am in right way.
plz help me by giving an example??
Q2) Does All MIDP2.0 enabled phones supports JSR 75??
How to find the JSR supported mobiles??
Q3) Is it Possible with JSR 75 to get access with existing Address book??
Plz help me.
Satish Babu Maragani

Hello,
1) JSR 75 can provide access to the native address book. Additionally, some device manufacturers provide proprietary APIs that also allow access to the address book. For example, Motorola Iden devices and the v600 series both have phonebook access APIs. But JSR 75 is the standard.
Here is an example of listing the native address books and contacts for a device that supports JSR 75:
String[] names = PIM.getInstance().listPIMLists(PIM.CONTACT_LIST);
for ( int i = 0; i < names.length; i++)
System.out.println("Address book name: " + names);
ContactList list = (ContactList) PIM.getInstance().openPIMList(PIM.CONTACT_LIST, PIM.READ_ONLY, names[i]);
Contact contact;
for (Enumeration e = list.items(); e.hasMoreElements();)
contact = (Contact) e.nextElement();
db.put(contactName(contact), contact);
System.out.println("Contact name = " + contactName(contact));
count++;
list.close();
2) Sorry. Not all 2.0 devices support JSR 75 or phonebook access for that matter. Go to the developer site of the device manufacturer and read the device specifications. They will tell you which J2ME APIs are supported.
3) Yes. On some devices you can access all the address book information including contacts stored on the SIM card. You will need authorization or a signed midlet in most cases.
Thanks,
Rashid Mayes
www.astrientlabs.com

Similar Messages

  • Need help to get started with iMovie

    I have used the iMac for sometime but never created a movie. With my new iMac, I want to start using the iMovie '09. The first basic problem is that it will not accept any of my videos.
    I have videos made on a fairly new Cannon camera (*.movl), on a Flip recorder (*.avi). I thought the program would accept the *.mov but it will not. I have converted these videos to mpeg4, mp4, mov using ffmpegx, and mpeg streamclip, but they still will not be accepted by the iMovie program. I tried to drag and drop the videos without success, both with and without first creating a "New Project". What am I doing wrong?
    Thanks

    Hi
    This is a very complexed question (I think) and I can only suggest partial help if any.
    I would from still photo Camera import to iPhoto. Mine does this and so the movie
    sequences too.
    Then after closing iPhoto and opening iMovie - I see in Browser/Events window high
    at left hand - My Mac hard disk and under this iPhoto Library
    And here I find my movie sequences from my Leica D-Lux and vife Nikon D300s
    Yours Bengt W

  • Need help on getting started with shopping cart!!

    hi guys,
    i want to build a fairly simple shopping cart with servlets and jsps.. can you please point me to a starting point.. a tutorial or a general road map for it.. i am pretty okay with servlets and jsps and currently using them for a web-app..
    any help would be greatly appreciated..thanks..

    go to http://www.moreservlets.com, download the free pdf book "Core Servlets and Java Server Pages", there is a example program on section 9.4 talks about shopping cart.
    Hope it helps.

  • Apple tv 2 - root password has been changed to non default.   I need to access apple tv 2.   how do i get access with a forgotten password

    apple tv 2 - root password has been changed to non default.   I need to access apple tv 2.   how do i get access with a forgotten password

    Welcome to the Apple Community.
    It depends on which password you are referring to, but generally speaking you can always restore the Apple TV.

  • Need help re-synching iPods with new computer and getting iTunes to...

    Need help re-synching iPods with new computer and getting iTunes to recognize our iPods (it doesn't even recognize them when they're plugged in).
    Hubby wiped my harddrive for me, so now I need to get everything back in proper places. I'm using windows XP and installed iTunes once again (I believe it's version 8). I also installed all of my iTunes songs. Now I need to know where to go from here. We have 3 iPods and I need to get them all synched once again. I know how to create different libraries for each of us, but I can't figure out how to get our songs back into our iTunes libraries. When I open iTunes and plug in an iPod, iTunes doesn't even show that an iPod is plugged in.
    What do I do now to get each of our iPods synched with our own libraries?
    TIA
    Brandy

    Thanks Zevoneer. The "Restart ipod service" worked and itunes is now recognizing my ipod! Hooray!
    Okay, now how do I synch all of our ipods with our individual libraries (I don't want all of my kids' songs and vice versa)? We each have hundreds of songs on our ipods that we don't want to lose.
    Thanks again!

  • HT4061 i cant activate my iphone 5c because it has been locked with a different apple id. i dont know the original owner so i need help. its a second-hand phone that i bought some months back

    i cant activate my iphone 5c because it has been locked with a different apple id. i dont know the original owner so i need help. its a second-hand phone that i bought some months back

    Unfortunately, there is pretty much nothing you can do. Only the owner of the account used to lock it can remove the lock. If you can't contact whoever you purchased it from, or if they can't or won't remove the lock, then it's a brick. There is a very real chance that it's stolen.

  • Need help on struts configuration with ColdFusion 10 using IIS

    We need help on struts configuration with ColdFusion 10 using IIS.
    Earlier we were using ColdFusion 8 with IIS 6 for one of our application.  This application internally calls struts. After upgrading to ColdFusion 10 struts calls are not loading. We get 404 error.
    In ColdFusion 8 struts were configured using  actions extension .do in IIS from this file-
    C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll.
    But in ColdFusion 10 this file is not present as ColdFusion 10 uses Tomcat in place of Jrun.
    Also there is no information in ColdFusion log file.

    Duane wrote:
    doctormirabilis, Welcome to the discussion area!
    1) how can i configure the time capsule in order to operate as a remote base station synchronizing with the relay using the ethernet port?
    Configure the Time Capsule to act as a bridge (not distributing IP addresses). Also configure the Time Capsule to create an 802.11n wireless network with a unique network name (SSID). That's it.
    2) how can i avoid that my powerbook while accessing my wireless network does connect through the relay station instead of using the time capsule?
    Configure the Time Capsule to use a different network name than the WDS link between the 2 AirPort Express (AX). Configure the PowerBook to use the Time Capsule network.
    There are 2 pieces of information that you should be aware of...
    (1) None of the PowerBooks are capable of 802.11n.
    (2) The WDS link cuts your available bandwidth in half. So the wireless link to your neighbor's has a maximum potential of 27 Mbps.
    Let's for a minute assume that you have a Mac compatible with 802.11n. In your configuration the time you could take advantage of the 802.11n speed is when the Mac is sending/recieving data directly from/to the Time Capsule.
    There would be NO speed increase in Internet access. The speed of Internet access is going to be controlled by the slowest link in the path to the Internet. That is probably the connection to the ISP. The next slowest path is the WDS link to your neighbor's.
    Duane,
    I am in a similar situation, sharing internet with my neighbor. Do you think it would be plausible to hook up a vonage phone adapter to time capsule's ethernet port if time capsule is bridging from my neighbor's router in the configuration you have described? A check of my upload speed shows 1.67Mbps (powerbookG4 w/ airport extreme). Vonage reccommends 90kbps minimum upload speed. Am I going to lose some speed putting the Vonag adapter behind time capsule?
    Thank you

  • TS1363 i need help to get out of recovery mode

    i need help to get out of recovery mode

    To get the phone out of recovery mode you will need to connect it to a computer with iTunes installed on it and restore it.

  • I need help trying to access my spotlight messages.

    I need help trying to access my spotlight messages.  I type in the persons name and only one text comes up but when I type in words in the text other ones come up.  So what I need to do is get all those text messages if its possible.

    I know the texts are there, but like I said it depends on the spotlight search but I want them all in one.

  • My mom and I both have iphone5 but when I send her messages they aren't blue but any other iphone I text is blue I need help to get that fixed

    My mom and I both have iphone5 but when I send her messages they aren't blue but any other iphone I text is blue I need help to get that fixed

    Both of you need to have iMessage activated, and both have to have active Internet connection for iMessage. Are you both using the same Apple ID? Are you using the phone number or Apple ID for messages?

  • Hi need help on getting customer open  items

    hi all,
    i need help regarding getting open items for customers in the previous
    ie. if i give current date,
    i want to get the open items for past 30 days from current date
    help me to get this ...
    thanks a lot
    regards,
    selvi

    or else ,
    use table BSID.
    Regards
    Peram

  • I need help in getting my Iphone 3gs unfrozen

    Need help in getting my Iphone 3gs unfrozen. The apple logo is shown yet it will not restart. Suggestions?

    Hi,
    Try here >  iPhone and iPod touch: Frozen and unresponsive

  • I need help in getting my software options in CS5 Photoshop Student version. We have registered the product but don't have print preview or Adjust Auto Levels for example?

    I need help in getting my software options in CS5 Photoshop Student version. We have registered the product but don't have print preview or Adjust Auto Levels for example?

    <moved from Downloading, Installing, Setting Up to Photoshop General Discussion>

  • I need help in getting my reponses

    I need help in getting my responses back, or I am sending out the form wrong and people aren't getting it. Either way I need help, as I am getting very frustrated.  Thanks Dori

    <moved from Downloading, Installing, Setting Up to Photoshop General Discussion>

  • Sign in told my firefox out of date did try to do upgrade but could not need help to get my sign in workin email

    sign in told my firefox is out of date. did try to do the upgrade but could not do
    need help to get my sign in working

    Kathleen Beal/funstarling please respond in https://support.mozilla.org/en-US/questions/982953

Maybe you are looking for

  • How Can I Execute Sql Query in Managed bean?

    Hi, I want to execute sql query in managedbean and get the query result. How can I do? Best wishes!

  • External Hard Drive Advice Needed

    Hi I'm thinking about getting one of these drives to back up whats on my macbook http://store.apple.com/Apple/WebObjects/ukstore.woa/wa/RSLID?mco=7C77401&fnode=h ome/shopmac/macaccessories/storage&nplm=TN735 The only stuff I'm really that fussed abou

  • Upgraded to 4.5.0.127 - phone is now slow to open from sleep

    did another upgrade. Everything went smooth. When phone is idle (black screen) and I hit one of the buttons to make it come alive, it takes a couple seconds whereas it use to be immediate. I also notice that with this upgrade there is no memory manag

  • SAP BW HR supporting issues guide lines

    Dear all, Iam working on SAP BW and recently i got a project on SAP BW HR.As it is totally new module for me can any one suggest me how to understand the project like IC , Info objects etc. and another imp point is even i dont have any basic knowlege

  • Urgent!!Variable for days not displaying properly!!!

    Hi When executing the Query,Variable for displaying Aging in days are not displaying between the selection.Pls any one help with regard to it.Pls tell wht r the main thing to be taken to consideration for this issue. Thanks