Need help in Mapping Logic

Hi all,
In mapping i need to mapp like this
Idoc--file scenario, sending delivery document to file system
in header of file structure, i have a field called Total Units, the logic for this field shld be
Sum up the field ZCONV_QUAN for each delivery.
How to do this please help me
Regards

Hi satish,
I have to do some thing more in this.
As you said i mapped the field to sum and to target field.its fine
Now this field is there at header level and comes only ones, i should repeat this field as many number of times the line item repeats.
Now iam using the ligic like this
ZCONV_QUAN--UseOneAsMany-Sum--Target Field
to UseOnaAsMany function i mapped ZCONV_QUAN as first argument and changed the context to Idoc and the second argument as line Item segment changed the context to Idoc, third argument as line itme segment.
its giving the error as
Too many values in first queue in function useOneAsMany. It must have the same number of contexts as second queue
Regards

Similar Messages

Need help on maps v3.04

i need help for map v3.04. i just downloaded the v3.04 and i notice it doesn't have GPS signal on the map. last time i was using v3.03, it has. the problem is, i have disabled the connection of internet. but when i use the map v3.04 for navigate, my credit still affected. i wonder why. is it using v3.04 is still ok or do i need to use v3.03. how to install v3.03 since the updater only have new one.thanks
Solved!
Go to Solution.

You should be able to use V3.04 without incuring any network charges as long as you have it set up correctly. Check the following.
Start the Location application and click on Positioning>Positioning methods. Make sure everything other than Integrated gps is unticked.
You will also need to download all the required map data. To do this, connect your phone to a pc using Ovi Suite and download the relevant map data. After that, start Maps, click on the Spanner icon>Internet>Connection, set this to Offline.
As for the signal bars, this has been replaced by the red dot on V3.04. The dot stops flashing when position fix is obtained. Sometimes you may see a pink halo around the red dot. The size of this halo gives you an indication of the position accuracy. The bigger the halo the less accurate the fix.

Need help buying a logic board!!!

Hi,
So I posted a while back about my mac failing to boot up. Now I concluded it was the logic board that was faulty. I need help deciphering what the part numbers mean.
My logic board part number is 630-6694/T6690 and model 820-1592-A. This came with the dual 2.0 ghz PPC970fx 90nm model (June 2004). There are boards with the same model number as mine, but different part number prefixes (i.e. 661-xxxx instead of 630-xxxx), so what does this mean????
I would like to really get the latest motherboard that is still compatible with the processors, if that's possible? I have seen different dual socket boards like 820-1760-A, which I'm interested in since it is the Early 2005 model.
Can anyone here with technical knowledge shed some light on what these model numbers and part numbers mean?
Thanks!

Hi, if it were me, I'd call one of these and see what'd work, I'm no expert but I hear G5s are really particular...
http://www.dvwarehouse.com/Logic-Boad-for-PowerMac-G5-(Early-2005)-820-1592-A-p-35673.html
http://www.welovemacs.com/6613584.html

Need help on mapping of obsolete and new function module

Hi Expert,
We are working on a upgradation tool in which i have to repace the obsolete function module "HELP_VALUES_GET_WITH_CHECKTAB
" by "F4IF_FIELD_VALUE_REQUEST
". I am not sure about the functionalities of these function modules as i have never used it. Can anyone please help me by providing some information abt these FMs. Also i need to do the mapping of parameters of old and new function module. So please provide the details of mapping also. Any pointers on this will be highly appreciated.
Thanks & Regards,
P Sharma
Moderator message : Duplicate post locked. Continue with [Parameter mapping of FMs|Parameter mapping of FMs;.
Edited by: Vinod Kumar on Jul 8, 2011 9:40 AM

Hey Enivass,
you can ckeck the input field "Account Number" whether it is numeric or Alphabet using *"Conversions ->Fixvalues"*
Steps:
1. Extract first character of input using *" Text -> substring"* -- start position 0 , char count 1
2. In Fix Value table you have to give following values:
Dafault value : Alphabet
key----
value
0----
Number
1----
Number
2----
Number
9----
Number
3. Write logic IF "number" than "Arithmatic -> FormatNumber   (0000000000)   -
// for leading zeros
         ELSE
     concat with extra space        -
Thanks

Need help with mapping

Hello professionals,
I need to map this structure
<message>
<node1>
   <ab>1</ab>
   <ab>2</ab>
   <ab>3</ab>
</node1>
<node1>
<ab>3</ab>
<ab>4</ab>
</node1>
<node1>
   <ab>5</ab>
   <ab>6</ab>
   <ab>7</ab>
</node1>
</message>
So, in the target structure I need to take only the first "ab" occurence in node1:
<message>
<node1>
   <ab>1</ab>
</node1>
<node1>
<ab>3</ab>
</node1>
<node1>
   <ab>5</ab>
</node1>
</message>
How can I do this? Many thanks for help!

Hi,
You can use COLLAPSECONTEXT or COPYVALUE(0) function
see this
http://help.sap.com/saphelp_nw04/helpdata/en/26/d22366565be0449d7b3cc26b1bab10/content.htm

Need help with mapping( UDF)

Hi,
I had a mapping requirement where i need to transfer data with double quotes
suppose data is
sap-labs
i need to send as "sap-labs".
The main problem is when ever there is '-'(it can be any where in the string) I need to modify as above, otherwise data can be sent directly.
I know how to do this requirement using Standard Functions.But, I am trying to use UDF so try to help me out with the code.
and also what i have to import for this UDF. and why i have to import them?
Thanks in advance,
Siva.

Hi Siva Bonthala,
Note: - quote ("), apostrophe ('), ampersand (&), less than (<), greater than (>) are special characters in XML. They should not be present in data. [Link1|http://www.w3.org/TR/REC-xml/] [Link2|Re: Special Character Handling (&) in the payload content in PI 7.1]
When you writing Java code to insert these special characters, you should use escape scequence characters.
Test it for your self, in graphical mapping, use 'concat' function and type Delimiter String as ". Then check output XML, it will contain &quot ;.
If you have to replace sap-labs with "sap-labs" for many element, I recomand you to use Java Mapping instead of UDF's for every field.
Regards,
Raghu_Vamsee

Need Help in improving logic for determining the range

Hi guys,
I need some help in my program logic to determine the range of value. My purpose of this program is to find which combinations have the lowest amplitude.
In the attachment is a set of number.
e.g 10 0 is a combination.
Each combination, I will need to draw a graph of data acquired using this combination VS gray level. There is 255 gray level. Every 5 gray level I will acquire a point so I will have 52 points.
Next, I will get the maximum value - minimum value. And this is the amplitude for the combination. I can do all this function, however it is not practical for me to do it this way until 360 360. There is a round 1200+ combination. It requires a long time since I need to interface all this function with my hardware.
The graph of each combination maybe a irregular shape. Do any of you have a logic to help me to shorten the process and find the range of values (combination) where the lowest amplitude may lies. Thanks!!
Attachments:
example.txt ‏11 KB

Hi Johnsold,
This is a example of my result. This is only a portion of it. The last column is the amplitude, I store all the 52 points into array and used Array Min and Max function. Then I use max - min to get the amplitude. From the amplitude I cannot see any pattern. Can you please advice me on it. Thanks!!!

NEED HELP!! LOGIC CRASHES AFTER splash screen plss hel

hey i recently updated to osx 10.6.6 and since then my logic pro has been acting up. But it has come to the point to where now it doesnt even open it crashes right after checking midi drivers. here is the report if anyone can pleasee helpp
Process: Logic Pro [483]
Path: /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Identifier: com.apple.logic.pro
Version: 8.0.2 (1502.22)
Build Info: Logic-15022200~9
Code Type: X86 (Native)
Parent Process: launchd [410]
Date/Time: 2011-01-23 18:53:35.804 -0500
OS Version: Mac OS X 10.6.6 (10J567)
Report Version: 6
Interval Since Last Report: 406669 sec
Crashes Since Last Report: 78
Per-App Interval Since Last Report: 367569 sec
Per-App Crashes Since Last Report: 59
Anonymous UUID: A3586FC6-6081-439D-A15C-C8042C0882EB
Exception Type: EXCBADACCESS (SIGABRT)
Exception Codes: KERNINVALIDADDRESS at 0x0000000049b45b69
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Application Specific Information:
abort() called
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 libSystem.B.dylib 0x9128a176 __kill + 10
1 libSystem.B.dylib 0x9128a168 kill$UNIX2003 + 32
2 libSystem.B.dylib 0x9131c89d raise + 26
3 libSystem.B.dylib 0x91332951 __abort + 124
4 libSystem.B.dylib 0x913329cd abortreportnp + 0
5 com.apple.logic.pro 0x002b37ff 0x1000 + 2828287
6 libSystem.B.dylib 0x9128f46b _sigtramp + 43
7 ??? 0x0000000b 0 + 11
8 com.apple.logic.pro 0x00020cff 0x1000 + 130303
9 com.apple.logic.pro 0x00021f94 0x1000 + 135060
10 com.apple.logic.pro 0x00032e0b 0x1000 + 204299
11 com.apple.logic.pro 0x002b741e 0x1000 + 2843678
12 com.apple.logic.pro 0x002b75e3 0x1000 + 2844131
13 com.apple.logic.pro 0x00012e8c 0x1000 + 73356
14 com.apple.logic.pro 0x0019534e 0x1000 + 1655630
15 com.apple.logic.pro 0x004d3c78 0x1000 + 5057656
16 com.apple.logic.pro 0x0051f9db 0x1000 + 5368283
17 com.apple.logic.pro 0x005205f9 0x1000 + 5371385
18 com.apple.AppKit 0x94753040 -[NSDocument readFromURL:ofType:error:] + 743
19 com.apple.logic.pro 0x00520410 0x1000 + 5370896
20 com.apple.AppKit 0x9463eddd -[NSDocument initWithContentsOfURL:ofType:error:] + 311
21 com.apple.AppKit 0x9463e981 -[NSDocumentController makeDocumentWithContentsOfURL:ofType:error:] + 383
22 com.apple.logic.pro 0x0053d6d3 0x1000 + 5490387
23 com.apple.AppKit 0x9463e739 -[NSDocumentController openDocumentWithContentsOfURL:display:error:] + 886
24 com.apple.logic.pro 0x004d8b79 0x1000 + 5077881
25 com.apple.Foundation 0x923d5588 nsnotecallback + 345
26 com.apple.CoreFoundation 0x9851f793 __CFXNotificationPost + 947
27 com.apple.CoreFoundation 0x9851f19a _CFXNotificationPostNotification + 186
28 com.apple.Foundation 0x923ca384 -[NSNotificationCenter postNotificationName:object:userInfo:] + 128
29 com.apple.Foundation 0x923d7789 -[NSNotificationCenter postNotificationName:object:] + 56
30 com.apple.AppKit 0x94423422 -[NSApplication _postDidFinishNotification] + 125
31 com.apple.AppKit 0x94423332 -[NSApplication _sendFinishLaunchingNotification] + 74
32 com.apple.AppKit 0x9457a4ed -[NSApplication(NSAppleEventHandling) _handleAEOpen:] + 274
33 com.apple.AppKit 0x9457a10d -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 101
34 com.apple.Foundation 0x9240a7a4 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 511
35 com.apple.Foundation 0x9240a568 _NSAppleEventManagerGenericHandler + 228
36 com.apple.AE 0x92dc8f58 aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned long, unsigned char*) + 166
37 com.apple.AE 0x92dc8e57 dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 43
38 com.apple.AE 0x92dc8d61 aeProcessAppleEvent + 197
39 com.apple.HIToolbox 0x97a07389 AEProcessAppleEvent + 50
40 com.apple.AppKit 0x943f39ca _DPSNextEvent + 1420
41 com.apple.AppKit 0x943f2fce -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 156
42 com.apple.AppKit 0x943b5247 -[NSApplication run] + 821
43 com.apple.prokit 0x0210df5c NSProApplicationMain + 326
44 com.apple.logic.pro 0x00003942 0x1000 + 10562
45 com.apple.logic.pro 0x00003869 0x1000 + 10345
Thread 1: Dispatch queue: com.apple.libdispatch-manager
0 libSystem.B.dylib 0x9124f982 kevent + 10
1 libSystem.B.dylib 0x9125009c dispatch_mgrinvoke + 215
2 libSystem.B.dylib 0x9124f559 dispatch_queueinvoke + 163
3 libSystem.B.dylib 0x9124f2fe dispatch_workerthread2 + 240
4 libSystem.B.dylib 0x9124ed81 pthreadwqthread + 390
5 libSystem.B.dylib 0x9124ebc6 start_wqthread + 30
Thread 2: com.apple.CFSocket.private
0 libSystem.B.dylib 0x912480c6 select$DARWIN_EXTSN + 10
1 com.apple.CoreFoundation 0x98540c83 __CFSocketManager + 1091
2 libSystem.B.dylib 0x9125685d pthreadstart + 345
3 libSystem.B.dylib 0x912566e2 thread_start + 34
Thread 3:
0 libSystem.B.dylib 0x912290fa machmsgtrap + 10
1 libSystem.B.dylib 0x91229867 mach_msg + 68
2 com.apple.audio.midi.CoreMIDI 0x025090c1 XServerMachPort::ReceiveMessage(int&, void*, int&) + 155
3 com.apple.audio.midi.CoreMIDI 0x0252797a MIDIProcess::RunMIDIInThread() + 150
4 com.apple.audio.midi.CoreMIDI 0x0250a2d9 XThread::RunHelper(void*) + 17
5 com.apple.audio.midi.CoreMIDI 0x02509ca6 CAPThread::Entry(CAPThread*) + 96
6 libSystem.B.dylib 0x9125685d pthreadstart + 345
7 libSystem.B.dylib 0x912566e2 thread_start + 34
Thread 4:
0 libSystem.B.dylib 0x9124ea12 _workqkernreturn + 10
1 libSystem.B.dylib 0x9124efa8 pthreadwqthread + 941
2 libSystem.B.dylib 0x9124ebc6 start_wqthread + 30
Thread 5:
0 libSystem.B.dylib 0x9124ea12 _workqkernreturn + 10
1 libSystem.B.dylib 0x9124efa8 pthreadwqthread + 941
2 libSystem.B.dylib 0x9124ebc6 start_wqthread + 30
Thread 6:
0 libSystem.B.dylib 0x9124ea12 _workqkernreturn + 10
1 libSystem.B.dylib 0x9124efa8 pthreadwqthread + 941
2 libSystem.B.dylib 0x9124ebc6 start_wqthread + 30
Thread 7:
0 libSystem.B.dylib 0x912570a6 _semwaitsignal + 10
1 libSystem.B.dylib 0x91282ee5 nanosleep$UNIX2003 + 188
2 libSystem.B.dylib 0x91282e23 usleep$UNIX2003 + 61
3 com.apple.AppKit 0x9455cfe1 -[NSUIHeartBeat _heartBeatThread:] + 2039
4 com.apple.Foundation 0x923d5bf0 -[NSThread main] + 45
5 com.apple.Foundation 0x923d5ba0 _NSThread__main_ + 1499
6 libSystem.B.dylib 0x9125685d pthreadstart + 345
7 libSystem.B.dylib 0x912566e2 thread_start + 34
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0x913328e1 ecx: 0xbfffde9c edx: 0x9128a176
edi: 0x1ed7c800 esi: 0x251df830 ebp: 0xbfffdeb8 esp: 0xbfffde9c
ss: 0x0000001f efl: 0x00000286 eip: 0x9128a176 cs: 0x00000007
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x010b7818

Hi, ish1919.
Have you updated the drivers for your hardware? An OS update sometimes needs later drivers. Older ones can cause conflicts. Check the manufacturer website [eg. RME] for your hardware and get the latest version.
Hope this helps.
Scorpii.

Need help in creating logic

Hi all,
I need suggestion of all of you guys in approaching my goal. What i want to do is... I have a bow still at one place but can rotate at its pivot point and there is an arrow that is used to pull the thread of the bow, as i drag back the arrow then thread of the bow should pull and when drag furthur, bow's thread should lose.
Can anyone help me how can i approach this.. I have attached an image as a refrence here.

create a movieclip. on its timeline create 3 layers.
the3 shapes (the arrow, the bow and the draw string) should each be placed on their own layer
shape tween the bowstring and shape tween the bow and classic tween the arrow.
position that movieclip's reg point and transform point where ever you want.

Need help in abap logic

I am facing problem in abap program.
Requirement :
i want to print the data like this
delivery no- item- from batch-   to batch -   material shade-   no of cones-   netwt-   grosswt-   no of bags.
delivery no & item from lips-vbeln lips-uecha field table.
against this i will be having no of batch in lips-charg field.
batches may be in order or may not be there.
Against this each batch i will get shade, no of cones, netwt, grosswt, from batch classification.
mch1,ausp   table.
on change of any of the above items or batch order i must print it with a new line.
example.
say supose if delivery 100 item 10 contains ABC001 batch to ABC008 batch ,
CDE 009 to CDE010, XYZ012, PQR013 batch.
this batch number contains characters and numeric.
i want to print like this
delivery___item__frombatch__to batch____shade__noofcones__netwt___grosswt____no of bags
100______10____ABC001____ABC008___black__40_________50 kg__50.4 kg_____8
_______________CDE009____CDE010___black__50_________50 kg__50.4 kg_____2
_______________XYZ012_____XYZ012___black__50_________50 kg__50.4 kg_____1
_______________PQR013____PQR013___black__40_________50 kg__50.4 kg_____1
can u any please help me how to build the logic.

Hello Navin,
You've got to give control break points within the loop, to fix the problem.
LOOP AT T_TABLE INTO FS_TABLE.
AT NEW FIELDNAME1.
    WRITE:/ FS_TABLE-FIELDNAME1.
ENDAT.                                   " AT NEW FIELDNAME1
AT NEW FIELDNAME2.
   WRITE:/ FS_TABLE-FIELDNAME2.
ENDAT.                                     " AT NEW FIELDNAME2
* Fieldname3 will be printed below distinct Fieldname2. Fieldname3 is printed as bunch.
   WRITE:/ FS_TABLE-FIELDNAME3.
ENDLOOP.                                " LOOP AT T_TABLE INTO FS_TABLE
Note:
Try giving ON CHANGE OF T_TABLE-FIELDNAME.
This is an obsolete statement, but this really does well, in case of printing Currency or Date.
Usually, date and currency fields are printed
Rs.****.**
LOOP AT T_TABLE INTO FS_TABLE.
ON CHANGE OF FS_TABLE-FIELDNAME1.
    WRITE:/ FS_TABLE-FIELDNAME1.
ENDON.                                   " ON CHANGE OF FS_TABLE-FIELDNAME1
ON CHANGE OF FS_TABLE-FIELDNAME2.
   WRITE:/ FS_TABLE-FIELDNAME2.
ENDON.                                     " ON CHANGE OF FS_TABLE-FIELDNAME2
   WRITE:/ FS_TABLE-FIELDNAME3.
ENDLOOP.                                " LOOP AT T_TABLE INTO FS_TABLE
Try with the concept above, hope you'll get the solution.
Thankyou,
Zahackson

Hi need help to change logic of IT0008 annual salary calculation

Hi friends
I am an HR ABAPer. I need to do following modification to IT0008 annual salary calculation.
currently in the Annual salary is calculated from PFREQ feature .
In PFREQ feature we have only
Company Code
Personnel Area
Personnel Subarea
Employee Group
Employee Subgroup
Transaction Class for Data Storage
Subtype
Country Grouping
Wage Type
Pay Scale Type to get the months to be considered .
The current requiremet is to consider ' No of years of services 'for Thiland to get the no of periods. I have an userexit 'EXIT_SAPLPARA_001' . Could you please help me how to use to meet the requirement only for Thiland ?

990094 wrote:
I am new to Java and i struck up in some java code. could some one modify the code according to my requirement please..No. Ask for help so YOU can change it and learn from it, don't flat out ask other people to do it for you. People will just assume you'll be the one flipping their burgers in the future if you do that.
new to JavaThere is a forum that has this exact name, I suggest you take your further questions (not requests to outsource work) there.

Need help understanding Specific Logic preferences

Hello everyone. I'm currently optimizing my system for my next project, and decided to dive into the manual and read up on Logic's song setttings/preferences, however there were a few I did not understand. Can someone explain the following Logic preferences and what they effect/do? (I have included the associated Logic manual pages, hoping they will make sense to you, as they didnt to me
Living Groove connection: pg. 641 No clue what this does
Smooth Cycle Algorithm: pg 641 Do not understand
Plugin Delay compensation: pg 644. Do I need this if I am not using a DSP card, but am using the "external" and "I/O" plugins?
Sample Accurate automation: pg 644 How important is this? How much "overall system performance" is effected with this enabled? When not enabled, what is the default unit? A frame? QF? Tick?
Audio preferences-Drivers-Process buffer Range: pg 380 Dont understand the testing process. What should I expect to change between the different settings?
Audio preferences-Sample editor-"Global Undo File path" or "Store undo files in song folder." Which to use an why?
Video-Video to Song: pg 653 Is this some sort of timing compensation? Why would this be used in place of Video offset within the session itself?
Thanks in advance for any reply!
Dual 2.5GHz G5 Mac OS X (10.4.5) 5Gb Ram, Logic 7.1.1 and other goodies

Living Groove connection - If you create a groove using a region, but then you change notes' positions/velocity in the template region, any quantizing you do based on that groove will change as well. don't know if it works reliably now. Last time I tried it many years ago it was flaky.
Smooth Cycle Algorithm: Tries to optimize the way cycling works to smooth transitions between end point and start point to eliminate glitching and/or stuttering in the time.
Plugin Delay compensation: Mostly for use with 3rd party DSP cards. I don't think it has any effect on external and I/O plugs. Could be wrong about that.
Sample Accurate automation: Performance hit depends on your CPU. Not sure what the non-sample accurate default is. Probably means that the resolution is the same as that of Midi data.
Audio preferences-Drivers-Process buffer Range. You have to test by trial-and-error. Use the smallest setting which doesn't make your computer convulse whent you work it hard. Changing this setting can alter the slew rate and latency of some kind of automation and thus change the way your mixes sound if you have a lot of rapid automation moves, so try not to mess with it once you find a good setting.
"Global Undo File path" or "Store undo files in song folder." Use the latter, particularly if you use project folders and have any intentions of transporting your work or need to keep access to your undo history. Putting undo data in project folder means it gets saved with your song.
Video-Video to Song: Is how you adjust the startpoint of the movie relative to the startpoint of the Song in Logic. Your downbeat may not correspond exactly to how the video was cut. This is how you compensate for that.
External Video to Song is an aditional adjustment to conpensate for latency caused by playing QT movies via a DV bridge device on FW.

Need help with map ids

I am getting very confused with generating a map id file, and
would appreciate a few pointers (using RH7).
I want to generate ids for *all* topics. I did this with
auto-generate, and that worked fine (created BSSCDefault.h). Since
then, I changed some topics (added/deleted) and want to regenerate
the map file.
I've tried simply regenerating into the default file, and
creating a new map file. When I do this, the topics start numbering
'after' the numbers from the first run. How do I simply blow away
the original file and start again?
Next... when I first generated the file, I was using X5. I
created .h and .bas files. Now, in RH7, I can't find where to
generate the .bas files. Help?
Thanks. I'm in a forest/trees situation right now and am sure
I'm missing something(s) really obvious.

Personally I prefer manually editing the map (.h) and alias
(.ali) files in notepad to add/amend mapids as when I first went
into this area I found the RH dialog more than a little bit
confusing. However once you get your head around it, it isn't too
bad.
The auto generate function works fine the first time around
but as you have found out, is less clear on subsequent use. You
could set the mapid options to start at a certain number but this
applies across all map files. That said, if you add to a new file
each time this wouldn't be a problem. What may be a problem is
several releases down the line where you end up with numerous map
files which makes it more difficult to manage.
If you were to delete the original map file, you will
automatically remove all the mapids and their association with the
topics. This may appear to the easiest way to go if you have all
your topics covered by mapids. However when you next auto generate,
you may end up with topics having different mapids from the
previous version which would mean your application API call
requiring a change for a lot of dialogs for each release.
It is best to leave the original map file and mapids and
added to them as required. I'd recommend having as few mapids as
possible unless there is good reason (e.g. too many mapids). Just
select the map file in the RH dialog, add the mapid via the icon
and then assign the topic to it.
As far as the .bas file is concerned, this has nothing to do
with the RH map file. Is this something produced on the VB
application side?

Please I need Help with Map quiz!!!

I design a map quiz that contain different area in my state, there is button that will be click to load a quiz in a particular area.. I don't know where to start from because i'm still a dummy in flash actionscript.
I will like if anyone could help before i forget there will be a score board for each area +2 and hotspot +10 mark and the question of each area must be random from xml file and they are different area. please help.......................

Click here and follow the instructions to change the iTunes Store country.
(82303)

Need help in upgrading Logic Pro 8!

So exciting the Logic Pro 8 finally come! But I just bought a Logic Pro 7 in Japanese last month:(
Aug. 22th I think. Am I still qualified in updating it into the newest version in American? cos i can't go to Japan again:(
What shall I prepare for upgrading? Please help me~~~~~

Can some one help me regarding this............................

Need help in Mapping Logic

Similar Messages

Maybe you are looking for