Need help in printer selection

Hello everyone.
I print occasionally (about 10 pages/month on average) and I have a pretty old ink-jet printer. I am contemplating to replace it with some color laser printer and the reason is the ink-cartridge(s) dry-out every few month usually at the time I want to print something and long before I use even half of the ink. My understanding is that toner cartridges for laser printers do not contain any liquids and therefore do not dryout. HP tech support claims that toner would last for up to a year. So my Q(s). are: does someone has an experience with toner cartridges lasting longer than a year? How the toner cartridge eventually dies: slowly fades or suddenly stops printing? Also, which printer might be best suitable?
Thanks.

Hi,
Just use the internal table to print the data in main window.
for first line which has not batchspitted(main line item) put condition as POSNR NE INITIAL.
and for batch split items, you already made posnr as '0000',
so put condition as POSNR eq INITIAL.
I think this will solve your problem.
Regards,
S Raju.

Similar Messages

MacBook - Newbie: Need help on printing wirelessly to XP shared printer

MacBook - Newbie: Need help on printing to XP shared printer
Bear with me please. I read tons of articles on this but somehow as a newbie to MAC (girlfriends sick daughter), I am missing something. 10.5.2
Currently, she can print directly if we plug in the HP Deskjet printer directly via USB to the MACBook. No problem.
When we first got the MACBOOK I tried setting up the MACBOOK wirelessly to recognize the workgroup where the printer was attached via USB to the Windows XP PC. However it printed out garbage since I did not know there was a difference between XP printing and MAC (Gutenberg/gimp printing/drivers).
Now I know there is a difference.
But in reading various instructions, I no longer can find how to connect the MAC to the Windows workgroup. Note we do have a printer set up currently as USB-HP Deskjet on the Macbook (not sure I need to delete it yet).
I went to System Preferences on MACBOOK and clicked on printers, more printers. In the drop down box was CANON, APPLETALK, IP HP printing and Firewire. There was no WINDOWS selection as I saw in other online web instructions.
So not sure how to proceed to find a way to:
1. Connect to Windows workgroup (click on what exactly), step by step please!!
2. Add correct HP Deskjet 5490 printer (perhaps there is one with Gutenberg or perhaps I need Gutenprint-really not sure what I am talking about)
Thanks so much in advance. Fiancé's kid has had her cancer recur in a different place and someone was nice enough to buy her a MACBOOK as a gift.
Sincerely
Peter

ccarbery wrote:
OK...I figured it out...no need to reply. I noticed that there was another Protocol to use to set up the printer on the Mac, I was using LPD, so I switched it to HP Jet Direct-socket, and it prints fine...thanks. I am curious as to why LPD wouldn't work; if anyone has that answer I would like to know...thanks
Any chance of posting the Protocol you used to connect to your printer with your laptop? I'm have the exact same problem printing from my MB. Same error message "..is busy".

I need help with printing labels. please

I need help with printing labels. thanks in advance

Welcome to Apple Support Communities.
In Address Book, first select a name or group of names to print.
Then File, Print, select Style, Mailing Labels, then Layout to select a specific target label (such as an Avery number), or define your own...

I need help with a SELECT query - help!

Hello, I need help with a select statement.
I have a table with 2 fields as shown below
Name | Type
John | 1
John | 2
John | 3
Paul | 1
Paul | 2
Paul | 3
Mark | 1
Mark | 2
I need a query that returns everything where the name has type 1 or 2 but not type 3. So in the example above the qery should bring back all the "Mark" records.
Thanks,
Ian

Or, if the types are sequential from 1 upwards you could simply do:-
SQL> create table t as
2 select 'John' as name, 1 as type from dual union
3 select 'John',2 from dual union
4 select 'John',3 from dual union
5 select 'Paul',1 from dual union
6 select 'Paul',2 from dual union
7 select 'Paul',3 from dual union
8 select 'Paul',4 from dual union
9 select 'Mark',1 from dual union
10 select 'Mark',2 from dual;
Table created.
SQL> select name
2 from t
3 group by name
4 having count(*) <= 2;
NAME
Mark
SQL>Or another alternative if they aren't sequential:
SQL> ed
Wrote file afiedt.buf
1 select name from (
2    select name, max(type) t
3    from t
4    group by name
5    )
6* where t < 3
SQL> /
NAME
Mark
SQL>Message was edited by:
blushadow

Need help with db select

As usual I have been stuck for a while on what is probably a very simple solution so perhaps someone can help me, thanks.
I have a portfolio page to which I post a url to filter the portfolio type (0, 1 or 2) and display the results.
It works ok except that I can't get the url right to show all records. I have tried things like
/portfolio.php?websitetype=1&2
and
/portfolio.php?websitetype=*
/portfolio.php?websitetype>0
Perhaps I need to change my select?
$query_portfolio = "SELECT * FROM portfoliodb WHERE portfoliodb.websitetype='". $_GET['websitetype'] ."' AND portfoliodb.visible = 1 ORDER BY portfoliodb.portfolio_id DESC";

bikeman01 wrote:
Ok I've now got it working as suggested so that's a big improvement, thanks but it's not quite what I was after. What I want is for all records to be retrieved by default when there is no url suffix and not require ?websitetype=ALL
That is not what your OP asked for!
It works ok except that I can't get the url right to show all records. I have tried things like
/portfolio.php?websitetype=1&2
and
/portfolio.php?websitetype=*
/portfolio.php?websitetype>0
// determine if the URL parameter for websitetype is set.
if (isset($_GET['websitetype'])) {
               // run a query to filter only selected types
               // based off value of URL parameter
                    $query_portfolio = "SELECT *
                    FROM portfoliodb
                    WHERE portfoliodb.websitetype='". $_GET['websitetype'] ."'
                    AND portfoliodb.visible = 1
                    ORDER BY portfoliodb.portfolio_id DESC";
// else if the URL parameter for websitetype is not set.
} else {
                    // run query to display ALL types
                    $query_portfolio = "SELECT *
                    FROM portfoliodb
                    ORDER BY portfoliodb.portfolio_id DESC";
// end condition if the URL parameter for websitetype is set.

Need help w/printer

i need help with my all in one printer it will print sometime and sometime it won't but it won't print anything off the internet and it won't print off word pad either and when it does print everything come out backwards tell me what is wrong and what i need too do to get it too print the right way from left to right and not right to left please help this is a problem and i have a lot of stuff too print out before friday off the internet much appreciated. Connie Morgan

i have a question about my hp deskjet F4240, i have been trying too print off the internet and word pad but it seem as everything is coming out backwards or not printing at all my computer is saying that my dpi is 1200 which i don't know what that means but i need to know what i can do too get my printer too work also i have never been able too scan anything on it and i would like too know how do i get it too scan also if u can help me out i would appreciate it so much and thank you for being here too help with my problem. Connie Morgan

Need help in writing SELECT   (strange, to many data in output?)

Hi,
I have:drop table jk_t1;
drop table jk_t2;
create table jk_t1 (
c1 number,
c2 varchar2(3),
c3 number
create table jk_t2 (
d1 number primary key,
d2 varchar2(4)
alter table jk_t1 add constraint t1_t2_fk foreign key (c3) references jk_t2(d1);
insert into jk_t2 values (1,'T2_1');
insert into jk_t1 values (1,'A11',1);
insert into jk_t1 values (2,'A21',1);
commit;I need to write a SELECT to get an output as:<ALL>
<D1>1</D1>
<D2>T2_1</D2>
<INN>
    <T1>
      <ROW><C1>1</C1><C2>A11</C2><C3>1</C3></ROW>
      <ROW><C1>2</C1><C2>A21</C2><C3>1</C3></ROW>
    </T1>
</INN>
</ALL>I'm trying:SELECT XMLElement("ALL",
extract(XMLType(CURSOR(SELECT t2.*, XMLElement("T1",extract(XMLType(CURSOR(
                            SELECT t1.*
                              FROM jk_t1 t1
                             WHERE t1.c3=t2.d1
                          )), '//ROW')) as inn
            FROM jk_t2 t2
           ORDER BY d2)
),'//ROW/*')
) AS output
FROM dual;but the output is<ALL>
<D1>1</D1>
<D2>T2_1</D2>
<INN>
    <T1>
      <ROW><C1>1</C1><C2>A11</C2><C3>1</C3></ROW>
      <ROW><C1>2</C1><C2>A21</C2><C3>1</C3></ROW>
    </T1>
</INN>
<C1>1</C1>
<C2>A11</C2>
<C3>1</C3>
<C1>2</C1>
<C2>A21</C2>
<C3>1</C3>
</ALL>What SELECT should it be to give me the correct output?
Thanks in advance,
JackK

Hi,
Drop the CURSOR thing, and use only SQL/XML functions :
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE     10.2.0.5.0     Production
TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - Production
SQL>
SQL> set long 5000
SQL>
SQL> select xmlelement("ALL",
2           xmlelement("D1", d1)
3         , xmlelement("D2", d2)
4         , xmlelement("INN",
5             xmlelement("T1",
6               xmlagg(
7                 xmlelement("ROW",
8                   xmlforest(c1, c2, c3)
9                 )
10               )
11             )
12           )
13         ).extract('/*') -- for display purpose only
14 from jk_t2 t2
15       join jk_t1 t1 on t1.c3 = t2.d1
16 group by t2.d1, t2.d2 ;
XMLELEMENT("ALL",XMLELEMENT("D
<ALL>
<D1>1</D1>
<D2>T2_1</D2>
<INN>
    <T1>
      <ROW>
        <C1>1</C1>
        <C2>A11</C2>
        <C3>1</C3>
      </ROW>
      <ROW>
        <C1>2</C1>
        <C2>A21</C2>
        <C3>1</C3>
      </ROW>
    </T1>
</INN>
</ALL>
{code}

Need help in printing text in footer

Hi Friends,
I need help from all you guys. I am working on SmartForms, and need help. Please look into the below situation, and appreciate if you can help me out.
The Literal **DATA CONTINUED ON NEXT PAGE** is to be displayed at the bottom of the
page in the Footer only if the data rolls onto second page.
Thanks,
Nikhil

Hi,
define the two variables in the global definition as
g_cnt type sy-tabix.
g_flg type c .
->in the initialization tab pass the internal table that is the main window.
g_cnt = lines( the table name which you are using in the main
window before the footer).
Now you have the total no of lines in the g_cnt.
in the loop which is in main window create the program line pass the output parameter as g_flg.
in the condions tab give the condition as g_cnt = sy-tabix.
in the source code of that program lines
g_flg = 'X'.
now for the footer where you are displaing the text coutinued on next page for in codition tab give the condition as g_flg = space.
Thanks,
NN.

Need help using the selection tool

Hi all,
I have some strange (to me) occurrences while using the 'quick selection tool'...
Explanation
I'm using PS Elements 11 on a Win 7 (64) PC.
What I want to do is to create a new pic from an existing pic. The existing pic's background is unsuitable for what I want. But the FG is what I need. I thought that selecting the FG object and placing into a new pic would be what I needed using the <quick selection tool>.
To do this, I am trying to use the <quick selection tool>. I've had varying degrees of success using it. One main thing I don't understand & pretty much renders my project useless & undoable, is the fact that whenever I use <refine edge> so that I can refine my edge selection, my pic is immediately lost or taken away. Since I have no idea as to what's happening, I am forced to close the pic (W/O saving changes, of course) & then re-opening the pic. All's well until I click the <refine edge> button again, then, my pic disappears AGAIN!
My guess is that maybe the pic is somehow transformed to a layer or something. But, how can I turn this behavior off and not make my pic disappear??
There are a few more details about this <selection tool> that I'm muddy on. Is there something where I can read more about its use? I would love to know more, but how? Where?
I've now read the online manual part about selection tools. Although it shed some light, I'm still needing more.
I am not a constant user of PSE, rather, I only use it on occasions. Normally, I use its scanning features. I may play around with a few other features, but I also know that PSE offers many other powerful features, I rarely, if ever, use.

This is the Photoshop forum. You want the Photoshop Elements forum:
Photoshop Elements

Need Help with Printer Please

I am a new MAC user. So please, if you have a solution for me, speak slowly. (LOL)
I have the new G5. Bought the Epson printer to go with it. It's the CX4200.
I loaded the software for it. But can't get it to print. It seems the computer won't or can't find it in their list of printers.
Ok, so I go to a Word Doc., for example. And select print. The window says that I need to select a printer. I hit the arrow down button and there's my printer listed. So I choose that, but still won't print. Seems I have to go down to another line in the same box and find the printer in this long list. There are many Epsons listed but not mine, which is the CX4200.
And darn-it, tech support on the phone is closed at 6pm!!!??? I sure hope to see a reply soon. I really need to print something tonight.
Thanks for any help you can provide.
My personal e-mail is
[email protected]
Thanks!
Cary
PS: This process asked me to choose an OS for my G5. I have no idea what my OS is. All's I know is I have a G5. Gosh, I feel soooo dumb!

What have you done so far?
I suggest you connect it via a usb cable first. Once you get the printer working, move to wifi. You will have to use an existing printer usb cable or purchase a cable. Be sure to get the correct cable. Ask for help.
The warrenty indicates there is phone support. Give HP a call.
Warranty
One-year limited hardware warranty; 24-hour, 7 days a week phone support
Robert

Need Help with Print a Report

Hi,
I am building a database application in Java and now i need to print some reports ....
I need to get the data from the database .. do some calculations , and then print in on paper.
I checked online and got some tools like JasperReports, jfreereports, ReportCat, etc. so I was wondering if somebody can suggest whats the best.
In my report I will have to print more than one table on one page.
for example:
if I have 4 Invoices. then i will have 4 tables .. one for each invoice.. and each table will contain
the elements for that Invoice.If all can't fit on one page then it needs to go next page.
I would like to do all this stuff in Java without using any reporting tool ... but I am not really sure how this can be
done .. can someone give me an idea ... as per how this can be done .. will really appriciate all the help.
Thanks in advance,
sandsouza

Hi,
Can somebody please help me with this.
Thanks in advance
sandsouza

Need Help With A Select Staement

This is my data set.
OPEN_DATE CLOSE_DATE
02-JAN-08 02-JAN-08
02-JAN-08 02-JAN-08
02-JAN-08 02-JAN-08
02-JAN-08 03-JAN-08
04-JAN-08 04-JAN-08
05-JAN-08
07-JAN-08
07-JAN-08 07-JAN-08
07-JAN-08 07-JAN-08
08-JAN-08 08-JAN-08
08-JAN-08
02-JAN-08
02-JAN-08
08-JAN-08
09-JAN-08
I'm need totals for those that are opened and closed per day. Here is what I'm trying to achieve...
Status Value DATE
Open 6 02-JAN-08
Closed 3 02-JAN-08
Open 0 03-JAN-08
Closed 1 03-JAN-08
Open 1 04-JAN-08
Closed 1 04-JAN-08
Open 0 05-JAN-08
Closed 1 05-JAN-08
Open 3 07-JAN-08
Closed 2 07-JAN-08
Open 3 08-JAN-08
Closed 1 08-JAN-08
Open 1 09-JAN-08
Close 0 09-JAN-08
This select statement gets me close but the problem is how to get the ones that should have a Value of 0
select 'Open' "Status", count(*) "Value", to_char(open_date, 'DD-MON-YY') "DATE"
from usar_log2
where open_date IS NOT NULL and
to_char(open_date, 'MON-YY') = to_char(sysdate, 'MON-YY')
and (USAR_status like 'CLOSED' or usar_status like 'OPENED' or USAR_Status like 'WORKING')
group by to_char(open_date, 'DD-MON-YY')
UNION
select 'Closed' "status", count(*) "Close", to_char(close_date, 'DD-MON-YY')
from usar_log2
where close_date is not null and
to_char(close_date, 'MON-YY') = to_char(sysdate, 'MON-YY')
and (USAR_status like 'CLOSED' or usar_status like 'OPENED' or USAR_Status like 'WORKING')
group by to_char(close_date, 'DD-MON-YY')
order by 3, 1 desc;
The above select statement's results...
Status Value DATE
Open 6 02-JAN-08
Closed 3 02-JAN-08
Closed 1 03-JAN-08
Open 1 04-JAN-08
Closed 1 04-JAN-08
Closed 1 05-JAN-08
Open 3 07-JAN-08
Closed 2 07-JAN-08
Open 3 08-JAN-08
Closed 1 08-JAN-08
Open 1 09-JAN-08
But I need this instead...
Status Value DATE
Open 6 02-JAN-08
Closed 3 02-JAN-08
<----- Open 0 03-JAN-08
Closed 1 03-JAN-08
Open 1 04-JAN-08
Closed 1 04-JAN-08
<----- Open 0 05-JAN-08
Closed 1 05-JAN-08
Open 3 07-JAN-08
Closed 2 07-JAN-08
Open 3 08-JAN-08
Closed 1 08-JAN-08
Open 1 09-JAN-08
<----- Close 0 09-JAN-08
Any help would be more appreciative.

Thank you...You all are great. While I'm still
looking at the various ways you all provided, from
what I have looked at so far, they don't address
05-JAN-08 which has a null open date. There are
three possiblities, maybe four. Does 05-JAN-08 have a null open date in the data you supplied?
You showed us:
OPEN_DATE CLOSE_DATE
02-JAN-08 02-JAN-08
02-JAN-08 02-JAN-08
02-JAN-08 02-JAN-08
02-JAN-08 03-JAN-08
04-JAN-08 04-JAN-08
05-JAN-08
07-JAN-08
07-JAN-08 07-JAN-08
07-JAN-08 07-JAN-08
08-JAN-08 08-JAN-08
08-JAN-08
02-JAN-08
02-JAN-08
08-JAN-08
09-JAN-08
which looks like they all have open dates.
Perhaps, if there was null open dates you should have used [code][/code] or [pre][/pre] tags around your data so it looked something like
OPEN_DATE CLOSE_DATE
02-JAN-08 02-JAN-08
02-JAN-08 02-JAN-08
02-JAN-08 02-JAN-08
02-JAN-08 03-JAN-08
04-JAN-08 04-JAN-08
          05-JAN-08
07-JAN-08
07-JAN-08 07-JAN-08
07-JAN-08 07-JAN-08
08-JAN-08 08-JAN-08
08-JAN-08
02-JAN-08
02-JAN-08
08-JAN-08
09-JAN-08And then it would have required the ANSI outer join in my query to allow for outer joining on more than one column...
SQL> ed
Wrote file afiedt.buf
1 WITH t as (SELECT to_date('02-JAN-2008','DD-MON-YYYY') as open_date, to_date('02-JAN-2008','DD-MON-YYYY') as closed_date from dual union all
2             SELECT to_date('02-JAN-2008','DD-MON-YYYY'), to_date('02-JAN-2008','DD-MON-YYYY') from dual union all
3             SELECT to_date('02-JAN-2008','DD-MON-YYYY'), to_date('02-JAN-2008','DD-MON-YYYY') from dual union all
4             SELECT to_date('02-JAN-2008','DD-MON-YYYY'), to_date('03-JAN-2008','DD-MON-YYYY') from dual union all
5             SELECT to_date('04-JAN-2008','DD-MON-YYYY'), to_date('04-JAN-2008','DD-MON-YYYY') from dual union all
6             SELECT NULL, to_date('05-JAN-2008','DD-MON-YYYY') from dual union all
7             SELECT to_date('07-JAN-2008','DD-MON-YYYY'), NULL from dual union all
8             SELECT to_date('07-JAN-2008','DD-MON-YYYY'), to_date('07-JAN-2008','DD-MON-YYYY') from dual union all
9             SELECT to_date('07-JAN-2008','DD-MON-YYYY'), to_date('07-JAN-2008','DD-MON-YYYY') from dual union all
10             SELECT to_date('08-JAN-2008','DD-MON-YYYY'), to_date('08-JAN-2008','DD-MON-YYYY') from dual union all
11             SELECT to_date('08-JAN-2008','DD-MON-YYYY'), NULL from dual union all
12             SELECT to_date('02-JAN-2008','DD-MON-YYYY'), NULL from dual union all
13             SELECT to_date('02-JAN-2008','DD-MON-YYYY'), NULL from dual union all
14             SELECT to_date('08-JAN-2008','DD-MON-YYYY'), NULL from dual union all
15             SELECT to_date('09-JAN-2008','DD-MON-YYYY'), NULL from dual)
16      ,all_dates as (select minod+rownum-1 as dt
17                     from   dual, (select min(open_date) minod, max(open_date) maxod from t)
18                     connect by rownum <= maxod-minod+1)
19      ,stat as (select 'open' as status from dual union all select 'closed' from dual)
20 -- END OF DATA
21 select all_dates.dt, stat.status, sum(decode(decode(stat.status, 'open', t.open_date, t.closed_date), all_dates.dt, 1, 0)) as cnt
22 from   stat JOIN all_dates ON (1=1)
23         LEFT OUTER JOIN t ON (NVL(t.open_date, NVL(t.closed_date, all_dates.dt)) = all_dates.dt)
24 group by all_dates.dt, stat.status
25* order by 1,2 desc
SQL> /
DT        STATUS        CNT
02-JAN-08 open            6
02-JAN-08 closed          3
03-JAN-08 open            0
03-JAN-08 closed          0
04-JAN-08 open            1
04-JAN-08 closed          1
05-JAN-08 open            0
05-JAN-08 closed          1
06-JAN-08 open            0
06-JAN-08 closed          0
07-JAN-08 open            3
07-JAN-08 closed          2
08-JAN-08 open            3
08-JAN-08 closed          1
09-JAN-08 open            1
09-JAN-08 closed          0
16 rows selected.
SQL>Make your requirements clear in the future.

Need Help regarding Printing the report in Bi Publisher

Hi,
I have configured the printer successfully. But the problem is when i give the print in PDF format it coming in some symbols and for single page it is printing nearly 10 pages. When i gave print in HTML format then it is printing in Html tags.
Please help me how to achieve this problem...
Thanks& Regards,
satish.e

Usually the BEX is slower than the web applications.BEX needs a lot of resources on the client computer.
Are you using any macors / VB code to do some processing before display the query output in BEX ?
Ravi

Need help for SQL SELECT query to fetch XML records from Oracle tables having CLOB field

Hello,
I have a scenario wherein i need to fetch records from several oracle tables having CLOB fields(which is holding XML) and then merge them logically to form a hierarchy XML. All these tables are related with PK-FK relationship. This XML hierarchy is having 'OP' as top-most root node and ‘DE’ as it’s bottom-most node with One-To-Many relationship. Hence, Each OP can have multiple GM, Each GM can have multiple DM and so on.
Table structures are mentioned below:
OP:
Name                             Null                    Type
OP_NBR                    NOT NULL      NUMBER(4)    (Primary Key)
OP_DESC                                        VARCHAR2(50)
OP_PAYLOD_XML                           CLOB
GM:
Name                          Null                   Type
GM_NBR                  NOT NULL       NUMBER(4)    (Primary Key)
GM_DESC                                       VARCHAR2(40)
OP_NBR               NOT NULL          NUMBER(4)    (Foreign Key)
GM_PAYLOD_XML                          CLOB
DM:
Name                          Null                    Type
DM_NBR                  NOT NULL         NUMBER(4)    (Primary Key)
DM_DESC                                         VARCHAR2(40)
GM_NBR                  NOT NULL         NUMBER(4)    (Foreign Key)
DM_PAYLOD_XML                            CLOB
DE:
Name                          Null                    Type
DE_NBR                     NOT NULL           NUMBER(4)    (Primary Key)
DE_DESC                   NOT NULL           VARCHAR2(40)
DM_NBR                    NOT NULL           NUMBER(4)    (Foreign Key)
DE_PAYLOD_XML                                CLOB
+++++++++++++++++++++++++++++++++++++++++++++++++++++
SELECT
j.op_nbr||'||'||j.op_desc||'||'||j.op_paylod_xml AS op_paylod_xml,
i.gm_nbr||'||'||i.gm_desc||'||'||i.gm_paylod_xml AS gm_paylod_xml,
h.dm_nbr||'||'||h.dm_desc||'||'||h.dm_paylod_xml AS dm_paylod_xml,
g.de_nbr||'||'||g.de_desc||'||'||g.de_paylod_xml AS de_paylod_xml,
FROM
DE g, DM h, GM i, OP j
WHERE
h.dm_nbr = g.dm_nbr(+) and
i.gm_nbr = h.gm_nbr(+) and
j.op_nbr = i.op_nbr(+)
+++++++++++++++++++++++++++++++++++++++++++++++++++++
I am using above SQL select statement for fetching the XML records and this gives me all related xmls for each entity in a single record(OP, GM, DM. DE). Output of this SQL query is as below:
Current O/P:
<resultSet>
     <Record1>
          <OP_PAYLOD_XML1>
          <GM_PAYLOD_XML1>
          <DM_PAYLOD_XML1>
          <DE_PAYLOD_XML1>
     </Record1>
     <Record2>
          <OP_PAYLOD_XML2>
          <GM_PAYLOD_XML2>
          <DM_PAYLOD_XML2>
          <DE_PAYLOD_XML2>
     </Record2>
     <RecordN>
          <OP_PAYLOD_XMLN>
          <GM_PAYLOD_XMLN>
          <DM_PAYLOD_XMLN>
          <DE_PAYLOD_XMLN>
     </RecordN>
</resultSet>
Now i want to change my SQL query so that i get following output structure:
<resultSet>
     <Record>
          <OP_PAYLOD_XML1>
          <GM_PAYLOD_XML1>
          <GM_PAYLOD_XML2> .......
          <GM_PAYLOD_XMLN>
          <DM_PAYLOD_XML1>
          <DM_PAYLOD_XML2> .......
          <DM_PAYLOD_XMLN>
          <DE_PAYLOD_XML1>
          <DE_PAYLOD_XML2> .......
          <DE_PAYLOD_XMLN>
     </Record>
     <Record>
          <OP_PAYLOD_XML2>
          <GM_PAYLOD_XML1'>
          <GM_PAYLOD_XML2'> .......
          <GM_PAYLOD_XMLN'>
          <DM_PAYLOD_XML1'>
          <DM_PAYLOD_XML2'> .......
          <DM_PAYLOD_XMLN'>
          <DE_PAYLOD_XML1'>
          <DE_PAYLOD_XML2'> .......
          <DE_PAYLOD_XMLN'>
     </Record>
<resultSet>
Appreciate your help in this regard!

Hi,
A few questions :
How's your first query supposed to give you an XML output like you show ?
Is there something you're not telling us?
What's the content of, for example, <OP_PAYLOD_XML1> ?
I don't think it's a good idea to embed the node level in the tag name, it would make much sense to expose that as an attribute.
What's the db version BTW?

Need help in Data selection in Smartforms

Hi All,
this data selection is for displaying data in smartforms.
I have a internal table passed on to the Smartforms where i have the Main item and its batches.
posnr text
10 line text1
90004
90005
20 line text2
90006
90007
And in the coding i have made the posnr for batches as 00000 for someother purpose.
now i need to display a text after an item and its batches.
like :
Item Prodcode description Qty uom Picked Factor
batchNo batch qty reel size to ship qty
10 19501 material description 200 M 0 3
Batch1 200 482448
Batch2 200 482448
Special instructions :
i used the following code in the Smartforms to display the Text.
                                                                                V_SPL = 'Special Line Instructions:'.
V_INDEX1 = V_INDEX + 1.
CLEAR IT_FINAL.
READ TABLE IT_FINAL INDEX V_INDEX1.
CLEAR V_INDEX1.
IF IT_FINAL-POSNR > 0.
   CLEAR IT_FINAL.
   READ TABLE IT_FINAL INDEX V_INDEX.
   V_INDEX1 = '9999'.
                                                                                V_ITEMTEXT = IT_FINAL-ITEMTEXT.
V_PACKTEXT = IT_FINAL-PACKTEXT.
ENDIF.
V_INDEX = V_INDEX + 1.
DESCRIBE TABLE IT_FINAL LINES V_LINE.
IF V_INDEX > V_LINE.
   V_INDEX1 = '9999'.
its ok now if the data in the internal table is like this without any batches.
10
20
30
if the data in the internal table is like :
posnr text
10 line text1
0000
0000
0000
20 line text2
0000
0000
30 line text3
0000
it is not getting the data for the text.
Actually in the code i have written to read the next record in the internal table and if it is greater than 0, i will write the TEXT before writing the next item.
But if the next record is 0000, how to code it.
and the main this is , the text has to be written only after writing the item and its batches.
please tell me how to do this.
Waiting for your replies.
Vikki.

Hi,
Just use the internal table to print the data in main window.
for first line which has not batchspitted(main line item) put condition as POSNR NE INITIAL.
and for batch split items, you already made posnr as '0000',
so put condition as POSNR eq INITIAL.
I think this will solve your problem.
Regards,
S Raju.

Need help in printer selection

Similar Messages

Maybe you are looking for