Need help in reading internal table data
Hi All,
I have two internal tables, it_cdhdr and it_cdpos. Data as follows:
it_cdhdr:
Objectclass ObjectId Changenr Udate Change_ind
EINKBELEG 4500057161 0003273002 20131129 U
EINKBELEG 4500057161 0003273001 20131129 U
EINKBELEG 4500057161 0003272995 20131129 U
EINKBELEG 4500057161 0003178904 20131030 U
EINKBELEG 4500057161 0003178903 20131030 U
it_cdpos
Objectclas ObjectId Changenr Tabname Fname Value_new Value_old
EINKBELEG 4500057161 0003178903 EKKO FRGKE A B
EINKBELEG 4500057161 0003178903 EKKO FRGZU X
EINKBELEG 4500057161 0003178903 EKKO PROCSTAT 05 03
EINKBELEG 4500057161 0003178903 EKKO RLWRT 800.00 0.00
EINKBELEG 4500057161 0003178904 EKET MENGE 1000.000 800.000
EINKBELEG 4500057161 0003178904 EKKN MENGE 500.000 400.000
EINKBELEG 4500057161 0003178904 EKKN NETWR 500.00 400.00
EINKBELEG 4500057161 0003178904 EKKO FRGKE B A
EINKBELEG 4500057161 0003178904 EKKO FRGZU X
EINKBELEG 4500057161 0003178904 EKKO PROCSTAT 03 05
EINKBELEG 4500057161 0003178904 EKKO RLWRT 1000.00 800.00
EINKBELEG 4500057161 0003178904 EKPO BRTWR 1000.00 800.00
EINKBELEG 4500057161 0003178904 EKPO MENGE 1000.000 800.000
EINKBELEG 4500057161 0003178904 EKPO NETWR 1000.00 800.00
EINKBELEG 4500057161 0003272995 EKKO FRGKE A B
EINKBELEG 4500057161 0003272995 EKKO FRGZU X
EINKBELEG 4500057161 0003272995 EKKO PROCSTAT 05 03
EINKBELEG 4500057161 0003273001 EKET MENGE 2000.000 1000.000
EINKBELEG 4500057161 0003273001 EKKN MENGE 1000.000 500.000
EINKBELEG 4500057161 0003273001 EKKN NETWR 1000.00 500.00
EINKBELEG 4500057161 0003273001 EKKO FRGKE B A
EINKBELEG 4500057161 0003273001 EKKO FRGZU X
EINKBELEG 4500057161 0003273001 EKKO PROCSTAT 03 05
EINKBELEG 4500057161 0003273001 EKKO RLWRT 2000.00 1000.00
EINKBELEG 4500057161 0003273001 EKPO AEDAT 20131129 20131030
EINKBELEG 4500057161 0003273001 EKPO BRTWR 2000.00 1000.00
EINKBELEG 4500057161 0003273001 EKPO MENGE 2000.000 1000.000
EINKBELEG 4500057161 0003273001 EKPO NETWR 2000.00 1000.00
EINKBELEG 4500057161 0003273002 EKKO FRGKE A B
EINKBELEG 4500057161 0003273002 EKKO FRGZU X
EINKBELEG 4500057161 0003273002 EKKO PROCSTAT 05 03
As per requirement, the main focus is on Changes to EKKN and EKPO tables and I have to get the latest changes.
If you observe in above it_cdpos internal table data, it has two records,
EINKBELEG 4500057161 0003178904 EKKN NETWR 500.00 400.00
EINKBELEG 4500057161 0003178904 EKPO NETWR 1000.00 800.00
EINKBELEG 4500057161 0003273001 EKKN NETWR 1000.00 500.00
EINKBELEG 4500057161 0003273001 EKPO NETWR 2000.00 1000.00
Now I have read only the latest changenr data. Say 0003273001 , in this case.
My question is how do I know, the latest changenr has EKKN table changes, if you look at it_cdpos data above, the latest one is 0003273002, which doesnt have EKKN changes.
Kindly let me know how to read latest EKKN or EKPO data from IT_CDPOS table.
Thanks in advance,
Rgs,
Priya
Hi Priya ,
I guess your requirement is to find the latest change number ,that has got change in both ekkn and ekkpo .
1- Sort it_cdhdr descending .
Loop at it_chdr into w_cdhdr
read table it_cdpos into w_cdpos with key changenr = w_cdhdr Tabname = ekkn .
if sy-subrc=0 .
read table it_cdpos into w_cdpos with key changenr = w_cdhdr Tabname = ekkpo .
if sy-subrc=0 .
"use convenient way to return change number (using varaiable)"
exit .
endif .
endif.
endloop .
By this way change number send will be the latest having both ekkn and ekkpo . If what i assumed is wrong ,then sorry for that .
Similar Messages
-
Need help in processing internal table
Hi all,
Im facing a problem in processing an internal table..especially with MODIFY.
The internal table is having following records.(t_vttp)
TKNUM VBELN KUNNR NAME1 LAND1
0000975179|0071004839|0000022946|HUNTSMAN APC LIMITED |SA |
0000975180|0071004845|0000022946| | |
In the above, there are two delviry documents with same customers.
The customer data is coming from different internal table.
LOOP AT t_vttp.
READ TABLE t_kna1_temp INTO wa_kna1_temp WITH KEY kunnr = t_vttp-kunnr.
IF sy-subrc = 0.
t_vttp-name1 = wa_kna1_temp-name1.
t_vttp-land1 = wa_kna1_temp-land1.
MODIFY t_vttp INDEX sy-tabix TRANSPORTING name1 land1.
ENDIF.
ENDLOOP.
Here for second record,,the customer name and country is nt getting populated to t_vttop.
Pls correct where it is going wrong.
Thanks,
PriyaHi Try the follwoing code with a little modification in your code.
LOOP AT t_vttp.
READ TABLE t_kna1_temp INTO wa_kna1_temp WITH KEY kunnr = t_vttp-kunnr.
IF sy-subrc = 0.
t_vttp-name1 = wa_kna1_temp-name1.
t_vttp-land1 = wa_kna1_temp-land1.
MODIFY t_vttp INDEX sy-tabix TRANSPORTING name1 land1.
append t_vttp.
ENDIF.
clear: wa_kna1_temp, t_vttp.
ENDLOOP
Also Please debugg your code and check if you are getting values.
also check the value of t_vttp-kunnr in debugging for the second run of your loop.
thanks
lalit -
Need help to find internal table.
hello friends,
i am working on a smart form i am given a transaction code, vf03 and a custom program and a custom function module,
i tried to use /h to do the debugging through vf03, but i could not understand where the control was going it was all roaming inthe standard code,
what all i need to do is to reach the internal table in the smartform, and do some modifications.
now how do i reach the internal table.
thank you.if you know smartform print program,then use se38 transaction-> use smart form print program and keep break point here.
Now run VF03 transaction and see it
Thanks
Seshu -
How to read internal table data and use to retrive from other table.
Hi all,
I am trying to generate a report using ooabap.
In this scenario, I retrieved data from one standard table (zcust) and successfully displayed using structure 'i_zcust_final' ( i_zcust_final is similar structure of zcust).
Now I want to get some other data from other standard table (zpurch) using the data in i_zcust_final. How....???? I am unable to read data from i_zcust_final even i kept in loop.
I am attaching the code here.. even it too long, please look at the code and suggest me what to do.
code **************************
REPORT ZBAT_OOPS_REPORT1.
TABLES: ZCUST.
D E F I N I T I O N *****
CLASS BATLANKI_CLS DEFINITION.
PUBLIC SECTION.
DATA : ITAB_ZCUST TYPE STANDARD TABLE OF ZCUST,
I_ZCUST_FINAL LIKE LINE OF ITAB_ZCUST,
ITAB_ZCUST1 TYPE STANDARD TABLE OF ZCUST.
TYPES: BEGIN OF IT_ZPURCH,
CUSTNUM TYPE ZPURCH-CUSTNUM,
PURC_DOC TYPE ZPURCH-PURC_DOC,
VENDOR TYPE ZPURCH-VENDOR,
STATUS TYPE ZPURCH-STATUS,
PURC_ORG TYPE ZPURCH-PURC_ORG,
END OF IT_ZPURCH.
DATA : ITAB_ZPURCH TYPE TABLE OF IT_ZPURCH,
I_ZPURCH_FINAL LIKE LINE OF ITAB_ZPURCH.
METHODS: GET_ZCUST,
PRINT_ZCUST,
GET_ZPURCH.
ENDCLASS.
I N I T I A L I Z T I O N *****
SELECT-OPTIONS:S_CUSNUM FOR ZCUST-CUSTNUM.
INITIALIZATION.
S_CUSNUM-LOW = '0100'.
S_CUSNUM-HIGH = '9999'.
S_CUSNUM-OPTION = 'BT'.
S_CUSNUM-SIGN = 'I'.
APPEND S_CUSNUM.
CLEAR S_CUSNUM.
I M P L E M E N T A T I O N *****
CLASS BATLANKI_CLS IMPLEMENTATION.
METHOD GET_ZCUST.
SELECT * FROM ZCUST
INTO TABLE ITAB_ZCUST
WHERE CUSTNUM IN S_CUSNUM.
ENDMETHOD.
METHOD PRINT_ZCUST.
LOOP AT ITAB_ZCUST INTO I_ZCUST_FINAL.
WRITE:/ I_ZCUST_FINAL-CUSTNUM,
I_ZCUST_FINAL-CUSTNAME,
I_ZCUST_FINAL-CITY,
I_ZCUST_FINAL-EMAIL.
ENDLOOP.
ENDMETHOD.
METHOD GET_ZPURCH.
LOOP AT ITAB_ZCUST INTO ITAB_ZCUST1.
SELECT CUSTNUM
PURC_DOC
VENDOR
STATUS
PURC_ORG
FROM ZPURCH
INTO CORRESPONDING FIELDS OF TABLE ITAB_ZPURCH
WHERE CUSTNUM EQ I_ZCUST_FINAL-CUSTNUM.
ENDLOOP.
LOOP AT ITAB_ZPURCH INTO I_ZPURCH_FINAL.
WRITE:/ I_ZPURCH_FINAL-CUSTNUM,
I_ZPURCH_FINAL-PURC_DOC,
I_ZPURCH_FINAL-VENDOR,
I_ZPURCH_FINAL-STATUS,
I_ZPURCH_FINAL-PURC_ORG.
ENDLOOP.
ENDMETHOD.
ENDCLASS.
O B J E C T *****
DATA: BATLANKI_OBJ TYPE REF TO BATLANKI_CLS.
START-OF-SELECTION.
CREATE OBJECT BATLANKI_OBJ.
CALL METHOD:
BATLANKI_OBJ->GET_ZCUST,
BATLANKI_OBJ->PRINT_ZCUST,
BATLANKI_OBJ->GET_ZPURCH.
Can anyone suggest me..
Thanks in advance,
Surender.Hi Surendar..
There is mistake in the Work area specification in this method.
METHOD GET_ZPURCH.
LOOP AT ITAB_ZCUST INTO ITAB_ZCUST1.
SELECT CUSTNUM
PURC_DOC
VENDOR
STATUS
PURC_ORG
FROM ZPURCH
INTO CORRESPONDING FIELDS OF TABLE ITAB_ZPURCH
<b>WHERE CUSTNUM EQ ITAB_ZCUST1-CUSTNUM.</b>
"Instead of I_ZCUST_FINAL-CUSTNUM.
ENDLOOP.
LOOP AT ITAB_ZPURCH INTO I_ZPURCH_FINAL.
WRITE:/ I_ZPURCH_FINAL-CUSTNUM,
I_ZPURCH_FINAL-PURC_DOC,
I_ZPURCH_FINAL-VENDOR,
I_ZPURCH_FINAL-STATUS,
I_ZPURCH_FINAL-PURC_ORG.
ENDLOOP.
ENDMETHOD.
Now it should work..
One more thing : From performance point of view you have to Replace that loop using FOR ALL ENTRIES . And avoid CORRESPONDING FIELDS. it will be slow.
This is the code.
LOOP AT ITAB_ZCUST INTO ITAB_ZCUST1.
if ITAB_ZCUST[] IS NOT INITIAL.
SELECT CUSTNUM
PURC_DOC
VENDOR
STATUS
PURC_ORG
FROM ZPURCH
INTO TABLE ITAB_ZPURCH
<b>for all entries in ITAB_ZCUST1</b>
<b>WHERE CUSTNUM EQ ITAB_ZCUST1-CUSTNUM.</b>
"Instead of I_ZCUST_FINAL-CUSTNUM.
ENDIF.
ENDLOOP.
<b>Reward if Helpful.</b> -
Download internal table data in excel format
Hi ,
i have a requirement where i need to download the internal table data in excel format .. I tried using the FM SAP_CONVERT_TO_XLS_FORMAT but this downloads to excel sheet same as .txt file foemat without columns ... i need to have the data in excel sheet with column heading and separated by each coulmn which should be similar as a general sheet with column names and the respective data in the columns . Appreciate any inputs .
Thanks,
Latha.Hi,
you can this in Debugging mode,
say,once you got entire data into ITAB
salect the TABLE option and provide the table name
now on the top most you can see excel icon,you click
on that,now system will prompts you for to the file to be saved.
Regards,
Vijaya. -
How to move large number of internal table data to excel by program
Hi,
Iam working on a classical report wherein my requirement is:
Have around 25 internal tables which I am displaying using a selection screen.I need to transfer this all internal tables data to Excel file by executing.
Now, let me know how can I transfer all those to excel by execution.
P.S.: GUI_DOWNLOAD or any other excel download related FMs are used to transfer for single/fewer internal tables.
But here I need to download 25 internal tables data through program.
How can I meet the requirement..?
Kindly advice.
Thanks,
Shiv.Hi,
Refer to the following code:
*& Report ZDOWNLOAD_PROGRAM
report zdownload_program.
parameter : p_path type rlgrap-filename default 'C:\Pdata.xls'.
data : gt_output type standard table of trdirt,
wa_output type trdirt,
p_filen type string.
at selection-screen on value-request for p_path.
clear p_path.
call function 'F4_FILENAME'
importing
file_name = p_path.
start-of-selection.
select * from trdirt
into table gt_output
where name like 'Z%'
or name like 'Y%'.
end-of-selection.
move : p_path to p_filen.
call function 'GUI_DOWNLOAD'
exporting
BIN_FILESIZE =
filename = p_filen
filetype = 'ASC'
APPEND = ' '
write_field_separator =
cl_abap_char_utilities=>horizontal_tab
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
WRITE_LF_AFTER_LAST_LINE = ABAP_TRUE
IMPORTING
FILELENGTH =
tables
data_tab = gt_output
FIELDNAMES =
exceptions
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
others = 22
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
Regards
Rajesh Kumar -
Need a POP-UP which can display internal table data in ALV format
HI All,
I need to display INTERNAL TABLE values through a POP-UP. Only condition is that the window with the internal table data should be in ALV format and not in TEXT only format.
To clarify, I used FM 'POPUP_WITH_TABLE_DISPLAY_OK' and 'POPUP_WITH_TABLE_DISPLAY', but both display the data in TEXT format and there is no provision to put the FIELD names there. Everthing needs to be put into internal table and it displays it in text format.
So I want a FM where I can display internal tabel data in ALV format( same format that would appear if you creata search help for a filed and output window would have all the ALV features like SORT buttons etc.
Hope there is some FM to achieve this ALV format data thing.
Thanks in advance for all your help.
Regards
FX3check this
REPORT y_demo_alv_3.
TYPE-POOLS: slis.
DATA: BEGIN OF i_outtab OCCURS 0.
INCLUDE STRUCTURE sflight.
DATA: w_chk TYPE c. "For multiple selection
DATA: END OF i_outtab.
* I_OUTTAB TYPE SFLIGHT OCCURS 0,
DATA: i_private TYPE slis_data_caller_exit,
i_selfield TYPE slis_selfield,
W_exit(1) TYPE c.
PARAMETERS: p_title TYPE sy-title.
START-OF-SELECTION.
SELECT * FROM sflight INTO TABLE i_outtab.
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
EXPORTING
i_title = p_title
i_selection = 'X'
i_zebra = 'X'
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
i_checkbox_fieldname = 'W_CHK'
* I_LINEMARK_FIELDNAME =
* I_SCROLL_TO_SEL_LINE = 'X'
i_tabname = 'I_OUTTAB'
i_structure_name = 'SFLIGHT'
* IT_FIELDCAT =
* IT_EXCLUDING =
* I_CALLBACK_PROGRAM =
* I_CALLBACK_USER_COMMAND =
* IS_PRIVATE = I_PRIVATE
IMPORTING
es_selfield = i_selfield
e_exit = w_exit
TABLES
t_outtab = i_outtab
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE i000(0k) WITH sy-subrc.
ENDIF.
*****the internal table is modified with a cross sign for marking the
***rows selected
LOOP AT i_outtab WHERE w_chk = 'X'.
WRITE: / i_outtab-carrid, i_outtab-price.
ENDLOOP. -
Internal table data 1E2 automatically convert to scientific format
Dear all,
I have been searched for solution moths from the forums and tried all possible methods, but still no way to solve my above problem. I found a way to solve it partially for us, but may be very helpful for others who meet similly case like mine, so I posted here.
my problem is when I export my internal table data to Excel, the Cell data with 1E2 auto becomes 1.00E02, and 1E8 becomes 1.00E08, we need it to be 1E2 and 1E8 in excel.
you can recreate my problem by
1, input 1E2 into your Microsoft Excel, then Enter, it will auto change into scientific format. which is we do not want.
2, use any of your SAP system open any table as long as there is a Char (>3) field in that table. add some
data entry in that field in the form "any amount (<15) of numeric 1 to 9"E"any one or two numeric 1 to 9". such as, 123E2, 1234E12 etc. then save this table's data to local file spread sheet, or use any FM to download it to a Excel file, when you open this
file by Excel, the cell with above form will display as scientific. but
if you put three or more numeric after the "E", such as 123E123 it will
display correctly.
what I have done:
I searched in SCN for similar thread:
Export to Excel 2007 - item number problem
Exceding the limit of numbers in Excel at target side
Excel download cell format problem
Formating as Text in excel through SAP
Converting of amount field into excel file through GUI DOWNLOAD
Data downloaded to excel gets converted to exponential format.
Problem with Excel download and scientific number
Re: Issue in displaying numbers in Excel?
CSV Flat File Data Problem (Number converting to Scientific Notation)
Tested accordingly, But none of these works in our case. because our
ultimate receiver of email attachment will be external third party, we cannot ask
them to change anything in their Excel.
Search Microsoft help about Excel, http://support.microsoft.com/kb/214233,
and it says this "Automatic Number Formatting" is a normal behaviour of excel.
no way to turn it off, the "work-around" way that Microsoft provides is not suitable for our
case.
We test CL_iXML recently arrording to weblog http://wiki.sdn.sap.com/wiki/display/Snippets/FormattedExcelasEmailAttachment
it successful controled the format. so this could be a solution for others whose internal table size is small. but our 2MB internal table bocome 6MB when converted to xml file attachment, which cannot be received by our end user's mail box. too big.
So please advise your ideas.
Many thanks in advance!
Peter Ding
Thank you very much for your time!Hi,
You can achieve this by describing the spreadsheet in XML with the help of the DOM classes.
The later releases of Excel can read and save spreadsheets as XML, providing your release supports this you can achieve it.
Check out the following Wiki
[Excel - XML|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/exporting%2bdata%2bto%2bexcel%2b-%2bxml%2bto%2bthe%2brescue]
Regards,
Darren -
Problem converting data in XML file to internal table data
Hi all,
I have a requirement. I need to convert an XML file to internal table data and based on that data do Goods Receipt in SAP.
With the help of this blog /people/r.eijpe/blog/2005/11/10/xml-dom-processing-in-abap-part-i--convert-an-abap-table-into-xml-file-using-sap-dom-approach
I am able to convert the XML file to data in SAP. But this blog will display the output on screen as ELELEMNT = nodename VALUE= value of that node.
But I donu2019t want in that way, I want to store all the data in XML file in an internal table so that I can make use of those values and do Goods Recipt in SAP.
Can some one suggest how should I read the data in an internal table.
Here is my code..what changes should I make?
*& Report z_xit_xml_check
REPORT z_xit_xml_check.
TYPE-POOLS: ixml.
TYPES: BEGIN OF t_xml_line,
data(256) TYPE x,
END OF t_xml_line.
DATA: l_ixml TYPE REF TO if_ixml,
l_streamfactory TYPE REF TO if_ixml_stream_factory,
l_parser TYPE REF TO if_ixml_parser,
l_istream TYPE REF TO if_ixml_istream,
l_document TYPE REF TO if_ixml_document,
l_node TYPE REF TO if_ixml_node,
l_xmldata TYPE string.
DATA: l_elem TYPE REF TO if_ixml_element,
l_root_node TYPE REF TO if_ixml_node,
l_next_node TYPE REF TO if_ixml_node,
l_name TYPE string,
l_iterator TYPE REF TO if_ixml_node_iterator.
DATA: l_xml_table TYPE TABLE OF t_xml_line,
l_xml_line TYPE t_xml_line,
l_xml_table_size TYPE i.
DATA: l_filename TYPE string.
PARAMETERS: pa_file TYPE char1024 DEFAULT 'c:\temp\orders_dtd.xml'.
Validation of XML file: Only DTD included in xml document is supported
PARAMETERS: pa_val TYPE char1 AS CHECKBOX.
START-OF-SELECTION.
Creating the main iXML factory
l_ixml = cl_ixml=>create( ).
Creating a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
PERFORM get_xml_table CHANGING l_xml_table_size l_xml_table.
wrap the table containing the file into a stream
l_istream = l_streamfactory->create_istream_itable( table = l_xml_table
size = l_xml_table_size ).
Creating a document
l_document = l_ixml->create_document( ).
Create a Parser
l_parser = l_ixml->create_parser( stream_factory = l_streamfactory
istream = l_istream
document = l_document ).
Validate a document
IF pa_val EQ 'X'.
l_parser->set_validating( mode = if_ixml_parser=>co_validate ).
ENDIF.
Parse the stream
IF l_parser->parse( ) NE 0.
IF l_parser->num_errors( ) NE 0.
DATA: parseerror TYPE REF TO if_ixml_parse_error,
str TYPE string,
i TYPE i,
count TYPE i,
index TYPE i.
count = l_parser->num_errors( ).
WRITE: count, ' parse errors have occured:'.
index = 0.
WHILE index < count.
parseerror = l_parser->get_error( index = index ).
i = parseerror->get_line( ).
WRITE: 'line: ', i.
i = parseerror->get_column( ).
WRITE: 'column: ', i.
str = parseerror->get_reason( ).
WRITE: str.
index = index + 1.
ENDWHILE.
ENDIF.
ENDIF.
Process the document
IF l_parser->is_dom_generating( ) EQ 'X'.
PERFORM process_dom USING l_document.
ENDIF.
*& Form get_xml_table
FORM get_xml_table CHANGING l_xml_table_size TYPE i
l_xml_table TYPE STANDARD TABLE.
Local variable declaration
DATA: l_len TYPE i,
l_len2 TYPE i,
l_tab TYPE tsfixml,
l_content TYPE string,
l_str1 TYPE string,
c_conv TYPE REF TO cl_abap_conv_in_ce,
l_itab TYPE TABLE OF string.
l_filename = pa_file.
upload a file from the client's workstation
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
filename = l_filename
filetype = 'BIN'
IMPORTING
filelength = l_xml_table_size
CHANGING
data_tab = l_xml_table
EXCEPTIONS
OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Writing the XML document to the screen
CLEAR l_str1.
LOOP AT l_xml_table INTO l_xml_line.
c_conv = cl_abap_conv_in_ce=>create( input = l_xml_line-data replacement = space ).
c_conv->read( IMPORTING data = l_content len = l_len ).
CONCATENATE l_str1 l_content INTO l_str1.
ENDLOOP.
l_str1 = l_str1+0(l_xml_table_size).
SPLIT l_str1 AT cl_abap_char_utilities=>cr_lf INTO TABLE l_itab.
WRITE: /.
WRITE: /' XML File'.
WRITE: /.
LOOP AT l_itab INTO l_str1.
REPLACE ALL OCCURRENCES OF cl_abap_char_utilities=>horizontal_tab IN
l_str1 WITH space.
WRITE: / l_str1.
ENDLOOP.
WRITE: /.
ENDFORM. "get_xml_table
*& Form process_dom
FORM process_dom USING document TYPE REF TO if_ixml_document.
DATA: node TYPE REF TO if_ixml_node,
iterator TYPE REF TO if_ixml_node_iterator,
nodemap TYPE REF TO if_ixml_named_node_map,
attr TYPE REF TO if_ixml_node,
name TYPE string,
prefix TYPE string,
value TYPE string,
indent TYPE i,
count TYPE i,
index TYPE i.
node ?= document.
CHECK NOT node IS INITIAL.
ULINE.
WRITE: /.
WRITE: /' DOM-TREE'.
WRITE: /.
IF node IS INITIAL. EXIT. ENDIF.
create a node iterator
iterator = node->create_iterator( ).
get current node
node = iterator->get_next( ).
loop over all nodes
WHILE NOT node IS INITIAL.
indent = node->get_height( ) * 2.
indent = indent + 20.
CASE node->get_type( ).
WHEN if_ixml_node=>co_node_element.
element node
name = node->get_name( ).
nodemap = node->get_attributes( ).
WRITE: / 'ELEMENT :'.
WRITE: AT indent name COLOR COL_POSITIVE INVERSE.
IF NOT nodemap IS INITIAL.
attributes
count = nodemap->get_length( ).
DO count TIMES.
index = sy-index - 1.
attr = nodemap->get_item( index ).
name = attr->get_name( ).
prefix = attr->get_namespace_prefix( ).
value = attr->get_value( ).
WRITE: / 'ATTRIBUTE:'.
WRITE: AT indent name COLOR COL_HEADING INVERSE, '=',
value COLOR COL_TOTAL INVERSE.
ENDDO.
ENDIF.
WHEN if_ixml_node=>co_node_text OR
if_ixml_node=>co_node_cdata_section.
text node
value = node->get_value( ).
WRITE: / 'VALUE :'.
WRITE: AT indent value COLOR COL_GROUP INVERSE.
ENDCASE.
advance to next node
node = iterator->get_next( ).
ENDWHILE.
ENDFORM. "process_dom
Any help would be highly apperciated.
regards,
Jessica SamPavel Vera,
With your example i tries doing the following .....
I tried to convert the data of XML file to internal table data. I am collecting the data in internal table to do goos recipt with that data.
Please find my XML file, ABAP pgm and XSLT pgm . I donu2019t know what I am missing I am not getting any output. I donu2019t know what is wrong please help me with this
Below is my XML file, My code and XSLT Program. In the below XML file I need to collect Vendor Number, Order Number, and Date tags which occur only once for one XML file.
I also need to collect the following tags from <Shipmentdetail>
<Shipmentdetail> has following child nodes and I need to collect them
TrackingNumber
Freight
Weight
ShipmentDate
ShipmentMethod
Need to collect to collect the following tags from <ProductInformation>
<ProductInformation> has following child nodes and I need to collect them
LineNumber
SKUNumber
OrderedQuantity
ShippedQuantity
UOM
The <Shipmentdetail> and <ProductInformation> are child nodes of <OrderShipment>
The <Shipmentdetail> occurs only ones but the <ProductInformation> can occur once or many times and will be dynamic and differs depening on the input file.
My XML file is as follows
<?xml version="1.0" encoding="iso-8859-1" ?>
- <ShipmentHeader>
<AccountID />
- <OrderShipment>
<VendorNumber>1000</VendorNumber>
<OrderNumber>P00009238</OrderNumber>
<OrderType>Stock</OrderType>
<Company />
<Division />
<Department />
<Date>20061120</Date>
<CartonCount>2</CartonCount>
<ShipAllProducts>No</ShipAllProducts>
- <ShipmentDetail>
<TrackingNumber>1ZR3W891PG47477811</TrackingNumber>
<Freight>000000010000</Freight>
<ShipmentDate>20061120</ShipmentDate>
<ShipmentMethod>UPS1PS</ShipmentMethod>
</ShipmentDetail>
- <ProductInformation>
<LineNumber>000000001</LineNumber>
<SKUNumber>110FR</SKUNumber>
<AdvSKUNumber>003 4518</AdvSKUNumber>
<SKUID />
<OrderedQuantity>00000001000000</OrderedQuantity>
<ShippedQuantity>00000001000000</ShippedQuantity>
<UOM>EA</UOM>
<Factor>1</Factor>
</ProductInformation>
- <ProductInformation>
<LineNumber>000000002</LineNumber>
<SKUNumber>938EN</SKUNumber>
<AdvSKUNumber>001 7294</AdvSKUNumber>
<SKUID />
<OrderedQuantity>00000000450000</OrderedQuantity>
<ShippedQuantity>00000000450000</ShippedQuantity>
<UOM>EA</UOM>
<Factor>1</Factor>
</ProductInformation>
- <CaseInformation>
<LineNumber>000000001</LineNumber>
<SKUNumber>110FR</SKUNumber>
<AdvSKUNumber>003 4518</AdvSKUNumber>
<SKUID />
<SSCCNumber>00000001668000002487</SSCCNumber>
<CaseQuantity>00000001000000</CaseQuantity>
<UOM>EA</UOM>
<Factor>1</Factor>
</CaseInformation>
<CaseInformation>
<LineNumber>000000001</LineNumber>
<SKUNumber>110FR</SKUNumber>
<AdvSKUNumber>003 4518</AdvSKUNumber>
<SKUID />
<SSCCNumber>00000001668000002487</SSCCNumber>
<CaseQuantity>00000001000000</CaseQuantity>
<UOM>EA</UOM>
<Factor>1</Factor>
</CaseInformation>
- </OrderShipment>
</ShipmentHeader>
My Program
TYPE-POOLS abap.
CONSTANTS gs_file TYPE string VALUE 'C:\temp\test.xml'.
* This is the structure for the data from the XML file
TYPES: BEGIN OF ts_shipment,
VendorNumber(10) TYPE n,
OrderNumber(20) TYPE n,
OrderType(8) TYPE c,
Date(8) TYPE c,
END OF ts_shipment.
TYPES: BEGIN OF ts_shipmentdetail,
TrackingNumber(30) TYPE n,
Freight(12) TYPE n,
Weight(14) TYPE n,
ShipmentDate(8) TYPE c,
ShipmentMethod(8) TYPE c,
END OF ts_shipmentdetail.
TYPES: BEGIN OF ts_productinformation,
LineNumber(9) TYPE n,
SKUNumber(20) TYPE c,
OrderedQuantity(14) TYPE n,
ShippedQuantity(14) TYPE n,
UOM(4) TYPE c,
END OF ts_productinformation.
* Table for the XML content
DATA: gt_itab TYPE STANDARD TABLE OF char2048.
* Table and work ares for the data from the XML file
DATA: gt_shipment TYPE STANDARD TABLE OF ts_shipment,
gs_shipment TYPE ts_shipment.
DATA: gt_shipmentdetail TYPE STANDARD TABLE OF ts_shipmentdetail,
gs_shipmentdetail TYPE ts_shipmentdetail.
DATA: gt_productinformation TYPE STANDARD TABLE OF ts_productinformation,
gs_productinformation TYPE ts_productinformation.
* Result table that contains references
* of the internal tables to be filled
DATA: gt_result_xml TYPE abap_trans_resbind_tab,
gs_result_xml TYPE abap_trans_resbind.
* For error handling
DATA: gs_rif_ex TYPE REF TO cx_root,
gs_var_text TYPE string.
* Get the XML file from your client
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
filename = gs_file
CHANGING
data_tab = gt_itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
not_supported_by_gui = 17
error_no_gui = 18
OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "ISHIPMENT".
GET REFERENCE OF gt_shipment INTO gs_result_xml-value.
gs_result_xml-name = 'ISHIPMENT'.
APPEND gs_result_xml TO gt_result_xml.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "ISHIPDET".
GET REFERENCE OF gt_shipmentdetail INTO gs_result_xml-value.
gs_result_xml-name = 'ISHIPDET'.
APPEND gs_result_xml TO gt_result_xml.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "IPRODDET".
GET REFERENCE OF gt_productinformation INTO gs_result_xml-value.
gs_result_xml-name = 'IPRODDET'.
APPEND gs_result_xml TO gt_result_xml.
* Perform the XSLT stylesheet
TRY.
CALL TRANSFORMATION z_xml_to_abap3
SOURCE XML gt_itab
RESULT (gt_result_xml).
CATCH cx_root INTO gs_rif_ex.
gs_var_text = gs_rif_ex->get_text( ).
MESSAGE gs_var_text TYPE 'E'.
ENDTRY.
* Writing the data from file for gt_shipment
*Collecting the Shipping Data from the XML file to internal table gt_shipment
*and writing the data to the screen
LOOP AT gt_shipment INTO gs_shipment.
WRITE: / 'VendorNumber:', gs_shipment-VendorNumber.
WRITE: / 'OrderNumber :', gs_shipment-OrderNumber.
WRITE: / 'OrderType :', gs_shipment-OrderType.
WRITE: / 'Date :', gs_shipment-Date.
WRITE : /.
ENDLOOP. "gt_shipment.
LOOP AT gt_shipmentdetail INTO gs_shipmentdetail.
WRITE: / 'TrackingNumber:', gs_shipmentdetail-TrackingNumber.
WRITE: / 'Freight :', gs_shipmentdetail-Freight.
WRITE: / 'Weight :', gs_shipmentdetail-Weight.
WRITE: / 'ShipmentDate :', gs_shipmentdetail-ShipmentDate.
* WRITE: / 'ShipmentMethod :' gs_shipmentdetail-ShipmentMethod
WRITE : /.
ENDLOOP. "gt_shipmentdetail.
LOOP AT gt_productinformation INTO gs_productinformation.
WRITE: / 'LineNumber:', gs_productinformation-LineNumber.
WRITE: / 'SKUNumber :', gs_productinformation-SKUNumber.
WRITE: / 'OrderedQuantity :', gs_productinformation-OrderedQuantity.
WRITE: / 'ShippedQuantity :', gs_productinformation-ShippedQuantity.
WRITE: / 'UOM :', gs_productinformation-UOM.
WRITE : /.
ENDLOOP. "gt_productinformation.
XSLT Program
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output encoding="iso-8859-1" indent="yes" method="xml" version="1.0"/>
<xsl:strip-space elements="*"/>
<xsl:template match="/">
<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
<asx:values>
<ISHIPMENT>
<xsl:apply-templates select="//OrderShipment"/>
</ISHIPMENT>
</asx:values>
</asx:abap>
</xsl:template>
<xsl:template match="OrderShipment">
<item>
<VENDORNUMBER>
<xsl:value-of select="VendorNumber"/>
</VENDORNUMBER>
<ORDERNUMBER>
<xsl:value-of select="OrderNumber"/>
</ORDERNUMBER>
<ORDERTYPE>
<xsl:value-of select="OrderType"/>
</ORDERTYPE>
<DATE>
<xsl:value-of select="Date"/>
</DATE>
</item>
</xsl:template>
<xsl:template match="/">
<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
<asx:values>
<ISHIPDET>
<xsl:apply-templates select="//OrderShipment/ShipmentDetail"/>
</ISHIPDET>
</asx:values>
</asx:abap>
</xsl:template>
<xsl:template match="ShipmentDetail">
<item>
<TRACKINGNUMBER>
<xsl:value-of select="TrackingNumber"/>
</TRACKINGNUMBER>
<FREIGHT>
<xsl:value-of select="Freight"/>
</FREIGHT>
<SHIPMENTDATE>
<xsl:value-of select="ShipmentDate"/>
</SHIPMENTDATE>
<SHIPMENTMETHOD>
<xsl:value-of select="ShipmentMethod"/>
</SHIPMENTMETHOD>
</item>
</xsl:template>
</xsl:transform> .
Any help is highly appreciated. If anyone encountered this situation before please let me know where i am going wrong in my XSLT transformation.
Any Help will be highly apppreciated. Thanks in advance
Regards,
Jessica Sam -
How to read internal table other program (assign?)
Hello techies,
The problem >
I have 2 Sap standard programs A & B
I'm editing a userexit in program B but I need to read
data from program A that is also running.
While using the debugger, I can ask for the folowing
(A)internaltable
example : (SAPLMEPO)pot
this shows the content of internal table "pot" of the program "SAPLMEPO".
The question>
How can I copy the content of a table(ex. pot) in program "A"(ex. SAPLMEPO) to a internal table pot2 of program "B"?
Possible sollution (does not work in 5.0)
CODE SAMPLE *************
Fields **
data: w_name type char50,"help field
w_recpot like ekpo."help structure
Internal tables **
data: Begin of it_pot2 occurs 0.
include structure it_pot2.
data: End of it_pot2
field-symbols <fs_pot> type any table.
w_structure_name = '(SAPLMEPO)pot'.
assign (w_structure_name) to <fs_pot>.
loop at <fs_pot> into w_recpot.
it_pot2 = w_recpot.
append it_pot2
Endloop.
END CODE SAMPLE *************
Thanks in advance,
FrederikHi again,
1. Simple.
2. In your case, u should use
<b>[]</b>
DATA : myitab LIKE TABLE OF t001 WITH HEADER LINE.
DATA : w_struct_name(100) TYPE c.
BREAK-POINT.
FIELD-SYMBOLS <fs_pot> TYPE ANY TABLE.
<b> w_struct_name = '(ZAM_TEMP0)ITAB[]'.</b>
ASSIGN (w_struct_name) TO <fs_pot>.
3. No need to use Loop etc.
4. *----
In your case
CODE SAMPLE *************
Fields **
data: w_name type char50,"help field
w_recpot like ekpo."help structure
Internal tables **
data: Begin of it_pot2 occurs 0.
include structure it_pot2.
data: End of it_pot2
field-symbols <fs_pot> type any table.
w_structure_name = '<b>(SAPLMEPO)POT[]</b>'.
assign (w_structure_name) to <fs_pot>.
NOT REQUIRED
*loop at <fs_pot> into w_recpot.
*it_pot2 = w_recpot.
*append it_pot2
*Endloop.
END CODE SAMPLE *************
regards,
amit m. -
Search Help values to Internal table
Dear Friends,
Is it possible to export Search Help values to Internal table?
On screen, when user click on Search button, the SAP standard search help will call (Customer Search). After entering values, some result get displayed and this result need to export to the internal table.
Thanks in stack
NileshHi:
try this:
DATA : wa_shlp TYPE shlp_descr,
it_records LIKE ddshretval OCCURS 0 WITH HEADER LINE.
wa_shlp-SHLPNAME = 'MAT0M'. "one of elementary search help name from mara-matnr.
wa_shlp-SHLPTYPE = 'SH'.
CALL FUNCTION 'F4IF_SELECT_VALUES'
EXPORTING
shlp = wa_shlp
MAXROWS = 0
SORT = ' '
CALL_SHLP_EXIT = ' '
IMPORTING
MAXROWS_EXCEEDED =
TABLES
RECORD_TAB =
RECDESCR_TAB =
return_tab = it_records
LOOP AT it_records.
WRITE:/ it_records.
ENDLOOP.
Follows is how to get the search help name:
CALL FUNCTION 'DD_SHLP_GET_HELPMETHOD'
EXPORTING
tabname = 'MARA'
fieldname = 'MATNR'
langu = sy-langu
NO_CHKTAB_MAPPING =
GET_ENTITYTAB = ' '
CHANGING
shlp = wa_shlp
callcontrol = callcontrol
EXCEPTIONS
field_not_found = 1
no_help_for_field = 2
OTHERS = 3
CALL FUNCTION 'F4IF_EXPAND_SEARCHHELP'
EXPORTING
shlp_top = wa_shlp
IMPORTING
shlp_tab = shlps.
好运,
启明星 -
Hi
I have a requirement of writing internal table data to XML. Any idea where i should start.
I have pretty good experience with ABAP and basic knowledge in XML.
There are good blogs which talk about transformations and other stuff but they are not able to give me clear path to my solution.
Could somebody give me a basic example or some reference material where i can move the data in internal table (assume Sales order details of a day) to XML.
ThanksRefer the program -
In this implementation we will only focus on the creation of the XML file and the transfer to the user. You can not create a XML document directly. You have to use a so called ixml factory first.
TYPE-POOLS: ixml.
DATA: l_ixml TYPE REF TO if_ixml.
l_ixml = cl_ixml=>create( ).
This iXML factory can create an empty XML document object named l_document.
DATA: l_document TYPE REF TO if_ixml_document.
l_document = l_ixml->create_document( ).
At this point you can add the nodes (elements, attributes) into the document. First you have to declare the root element node.
DATA: l_element_root TYPE REF TO if_ixml_element.
This node we have to give a name and add it (create_simple_node) to the document object l_document, which will be the parent of this node.
l_element_root = l_document->create_simple_element(
name = 'flights'
parent = l_document ).
Next we can add child nodes to there parent node using the same method of the document object.
DATA: l_element_airline TYPE REF TO if_ixml_element,
l_element_airline = l_document->create_simple_element(
name = 'airline'
parent = l_element_root ).
An attribute can be add easily using the method set_attribute of the element node.
l_rc = l_element_airline->set_attribute( name = 'code' value = 'LH401' ).
Now we have finished the document object. Regretfully it can not be displayed in any form due to the fact that it is a binary object.
The next step is to convert the created document to a flat file. To achieve this we have to create a stream factory, which will help us to create an output stream.
DATA: l_streamfactory TYPE REF TO if_ixml_stream_factory.
l_streamfactory = l_ixml->create_stream_factory( ).
In this case, we will convert the document into an output stream which is based on an internal table of type x.
TYPES: BEGIN OF xml_line,
data(256) TYPE x,
END OF xml_line.
DATA: l_xml_table TYPE TABLE OF xml_line,
l_xml_size TYPE i,
l_rc TYPE i,
l_ostream TYPE REF TO if_ixml_ostream.
l_ostream = l_streamfactory->create_ostream_itable( table = l_xml_table ).
When we have created the output stream we can do the rendering from the document into the stream. The XML data will be stored in the internal table automatically.
DATA: l_renderer TYPE REF TO if_ixml_renderer.
l_renderer = l_ixml->create_renderer( ostream = l_ostream
& nbsp; document = l_document ).
l_rc = l_renderer->render( ).
In the last step we upload the file to the sapgui
l_xml_size = l_ostream->get_num_written_raw( ).
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
bin_filesize = l_xml_size
filename = 'c:\temp\flights.xml'
filetype = 'BIN'
CHANGING
data_tab = l_xml_table
EXCEPTIONS
OTHERS = 24.
This finished the first step-of-three. As mentioned before the next log will focus on the conversion from xml files (back) to abap tables.
REPORT z_xit_xml_dom_create.
TYPE-POOLS: ixml.
TYPES: BEGIN OF xml_line,
data(256) TYPE x,
END OF xml_line.
DATA: l_ixml TYPE REF TO if_ixml,
l_streamfactory TYPE REF TO if_ixml_stream_factory,
l_ostream TYPE REF TO if_ixml_ostream,
l_renderer TYPE REF TO if_ixml_renderer,
l_document TYPE REF TO if_ixml_document.
DATA: l_element_flights TYPE REF TO if_ixml_element,
l_element_airline TYPE REF TO if_ixml_element,
l_element_flight TYPE REF TO if_ixml_element,
l_element_from TYPE REF TO if_ixml_element,
l_element_to TYPE REF TO if_ixml_element,
l_element_dummy TYPE REF TO if_ixml_element,
l_value TYPE string.
DATA: l_xml_table TYPE TABLE OF xml_line,
l_xml_size TYPE i,
l_rc TYPE i.
DATA: lt_spfli TYPE TABLE OF spfli.
DATA: l_spfli TYPE spfli.
START-OF-SELECTION.
Fill the internal table
SELECT * FROM spfli INTO TABLE lt_spfli.
Sort internal table
SORT lt_spfli BY carrid.
Start filling xml dom object from internal table
LOOP AT lt_spfli INTO l_spfli.
AT FIRST.
Creating a ixml factory
l_ixml = cl_ixml=>create( ).
Creating the dom object model
l_document = l_ixml->create_document( ).
Fill root node with value flights
l_element_flights = l_document->create_simple_element(
name = 'flights'
parent = l_document ).
ENDAT.
AT NEW carrid.
Create element 'airline' as child of 'flights'
l_element_airline = l_document->create_simple_element(
name = 'airline'
parent = l_element_flights ).
Create attribute 'code' of node 'airline'
l_value = l_spfli-carrid.
l_rc = l_element_airline->set_attribute( name = 'code' value = l_value ).
Create attribute 'name' of node 'airline'
SELECT SINGLE carrname FROM scarr INTO l_value WHERE carrid EQ l_spfli-carrid.
l_rc = l_element_airline->set_attribute( name = 'name' value = l_value ).
ENDAT.
AT NEW connid.
Create element 'flight' as child of 'airline'
l_element_flight = l_document->create_simple_element(
name = 'flight'
parent = l_element_airline ).
Create attribute 'number' of node 'flight'
l_value = l_spfli-connid.
l_rc = l_element_flight->set_attribute( name = 'number' value = l_value ).
ENDAT.
Create element 'from' as child of 'flight'
CONCATENATE l_spfli-cityfrom ',' l_spfli-countryfr INTO l_value.
l_element_from = l_document->create_simple_element(
name = 'from'
value = l_value
parent = l_element_flight ).
Create attribute 'airport' of node 'from'
l_value = l_spfli-airpfrom.
l_rc = l_element_from->set_attribute( name = 'airport' value = l_value ).
Create element 'to' as child of 'flight'
CONCATENATE l_spfli-cityto ',' l_spfli-countryto INTO l_value.
l_element_to = l_document->create_simple_element(
name = 'to'
value = l_value
parent = l_element_flight ).
Create attribute 'airport' of node 'from'
l_value = l_spfli-airpto.
l_rc = l_element_to->set_attribute( name = 'airport' value = l_value ).
Create element 'departure' as child of 'flight'
l_value = l_spfli-deptime.
l_element_dummy = l_document->create_simple_element(
name = 'departure'
value = l_value
parent = l_element_flight ).
Create element 'arrival' as child of 'flight'
l_value = l_spfli-arrtime.
l_element_dummy = l_document->create_simple_element(
name = 'arrival'
value = l_value
parent = l_element_flight ).
Create element 'type' as child of 'flight'
CASE l_spfli-fltype.
WHEN 'X'.
l_value = 'Charter'.
WHEN OTHERS.
l_value = 'Scheduled'.
ENDCASE.
l_element_dummy = l_document->create_simple_element(
name = 'type'
value = l_value
parent = l_element_flight ).
ENDLOOP.
IF sy-subrc NE 0.
MESSAGE 'No data into db table ''spfli'', please run program ''SAPBC_DATA_GENERATOR'' with transaction ''SA38''' TYPE 'E'.
ENDIF.
Creating a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
Connect internal XML table to stream factory
l_ostream = l_streamfactory->create_ostream_itable( table = l_xml_table ).
Rendering the document
l_renderer = l_ixml->create_renderer( ostream = l_ostream
document = l_document ).
l_rc = l_renderer->render( ).
Saving the XML document
l_xml_size = l_ostream->get_num_written_raw( ).
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
bin_filesize = l_xml_size
filename = 'c:\temp\flights.xml'
filetype = 'BIN'
CHANGING
data_tab = l_xml_table
EXCEPTIONS
OTHERS = 24.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
<?xml version="1.0"?>
<flights>
<airline code="AA" name="American Airlines">
<flight number="0017">
<from airport="JFK">NEW YORK,US</from>
<to airport="SFO">SAN FRANCISCO,US</to>
<departure>110000</departure>
<arrival>140100</arrival>
<type>Scheduled</type>
</flight>
<flight number="0064">
<from airport="SFO">SAN FRANCISCO,US</from>
<to airport="JFK">NEW YORK,US</to>
<departure>090000</departure>
<arrival>172100</arrival>
<type>Scheduled</type>
</flight>
</airline>
<airline code="AZ" name="Alitalia">
<flight number="0555">
<from airport="FCO">ROME,IT</from>
<to airport="FRA">FRANKFURT,DE</to>
<departure>190000</departure>
<arrival>210500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0788">
<from airport="FCO">ROME,IT</from>
<to airport="TYO">TOKYO,JP</to>
<departure>120000</departure>
<arrival>085500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0789">
<from airport="TYO">TOKYO,JP</from>
<to airport="FCO">ROME,IT</to>
<departure>114500</departure>
<arrival>192500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0790">
<from airport="FCO">ROME,IT</from>
<to airport="KIX">OSAKA,JP</to>
<departure>103500</departure>
<arrival>081000</arrival>
<type>Charter</type>
</flight>
</airline>
<airline code="DL" name="Delta Airlines">
<flight number="1984">
<from airport="SFO">SAN FRANCISCO,US</from>
<to airport="JFK">NEW YORK,US</to>
<departure>100000</departure>
<arrival>182500</arrival>
<type>Scheduled</type>
</flight>
<flight number="1699">
<from airport="JFK">NEW YORK,US</from>
<to airport="SFO">SAN FRANCISCO,US</to>
<departure>171500</departure>
<arrival>203700</arrival>
<type>Scheduled</type>
</flight>
<flight number="0106">
<from airport="JFK">NEW YORK,US</from>
<to airport="FRA">FRANKFURT,DE</to>
<departure>193500</departure>
<arrival>093000</arrival>
<type>Scheduled</type>
</flight>
</airline>
<airline code="JL" name="Japan Airlines">
<flight number="0407">
<from airport="NRT">TOKYO,JP</from>
<to airport="FRA">FRANKFURT,DE</to>
<departure>133000</departure>
<arrival>173500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0408">
<from airport="FRA">FRANKFURT,DE</from>
<to airport="NRT">TOKYO,JP</to>
<departure>202500</departure>
<arrival>154000</arrival>
<type>Charter</type>
</flight>
</airline>
<airline code="LH" name="Lufthansa">
<flight number="2407">
<from airport="TXL">BERLIN,DE</from>
<to airport="FRA">FRANKFURT,DE</to>
<departure>071000</departure>
<arrival>081500</arrival>
<type>Scheduled</type>
</flight>
<flight number="2402">
<from airport="FRA">FRANKFURT,DE</from>
<to airport="SXF">BERLIN,DE</to>
<departure>103000</departure>
<arrival>113500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0402">
<from airport="FRA">FRANKFURT,DE</from>
<to airport="JFK">NEW YORK,US</to>
<departure>133000</departure>
<arrival>150500</arrival>
<type>Charter</type>
</flight>
<flight number="0401">
<from airport="JFK">NEW YORK,US</from>
<to airport="FRA">FRANKFURT,DE</to>
<departure>183000</departure>
<arrival>074500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0400">
<from airport="FRA">FRANKFURT,DE</from>
<to airport="JFK">NEW YORK,US</to>
<departure>101000</departure>
<arrival>113400</arrival>
<type>Scheduled</type>
</flight>
</airline>
<airline code="QF" name="Qantas Airways">
<flight number="0005">
<from airport="SIN">SINGAPORE,SG</from>
<to airport="FRA">FRANKFURT,DE</to>
<departure>225000</departure>
<arrival>053500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0006">
<from airport="FRA">FRANKFURT,DE</from>
<to airport="SIN">SINGAPORE,SG</to>
<departure>205500</departure>
<arrival>150500</arrival>
<type>Scheduled</type>
</flight>
</airline>
<airline code="SQ" name="Singapore Airlines">
<flight number="0988">
<from airport="SIN">SINGAPORE,SG</from>
<to airport="TYO">TOKYO,JP</to>
<departure>163500</departure>
<arrival>001500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0158">
<from airport="SIN">SINGAPORE,SG</from>
<to airport="JKT">JAKARTA,ID</to>
<departure>152500</departure>
<arrival>160000</arrival>
<type>Scheduled</type>
</flight>
<flight number="0015">
<from airport="SFO">SAN FRANCISCO,US</from>
<to airport="SIN">SINGAPORE,SG</to>
<departure>160000</departure>
<arrival>024500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0002">
<from airport="SIN">SINGAPORE,SG</from>
<to airport="SFO">SAN FRANCISCO,US</to>
<departure>170000</departure>
<arrival>192500</arrival>
<type>Scheduled</type>
</flight>
</airline>
<airline code="UA" name="United Airlines">
<flight number="0941">
<from airport="FRA">FRANKFURT,DE</from>
<to airport="SFO">SAN FRANCISCO,US</to>
<departure>143000</departure>
<arrival>170600</arrival>
<type>Scheduled</type>
</flight>
<flight number="3504">
<from airport="SFO">SAN FRANCISCO,US</from>
<to airport="FRA">FRANKFURT,DE</to>
<departure>150000</departure>
<arrival>103000</arrival>
<type>Scheduled</type>
</flight>
<flight number="3516">
<from airport="JFK">NEW YORK,US</from>
<to airport="FRA">FRANKFURT,DE</to>
<departure>162000</departure>
<arrival>054500</arrival>
<type>Scheduled</type>
</flight>
<flight number="3517">
<from airport="FRA">FRANKFURT,DE</from>
<to airport="JFK">NEW YORK,US</to>
<departure>104000</departure>
<arrival>125500</arrival>
<type>Scheduled</type>
</flight>
</airline>
</flights>
Regards,
Amit
Reward all helpful replies. -
PDF File from an internal table data
I have an internal table ready for grid display of a report. But according to the new requirement, it shouldn't create a Spool request as it is affecting the performance of the system (because its a huge file with 3000+ pages).
So, now we want to create a (non-editable) PDF File and store it in an application server.
From the forum, i see that i have only one option, which is to Convert internal table data to OTF Format and then to PDF.
Right now i am using PRINT_TEXT to convert to OTF file and FM CONVERT_OTF for PDF file.
The challenges i am facing right now is..
1. After getting the OTF file from PRINT_TEXT, i couldn't get the correct PDF File. It shows random characters instead..
2. My internal table has 103 columns. So how should i accommodate data from all these columns into a single row on a PDF?
3. I couldn't create a table kind of view/display in PDF
Please help/advice me on the above issue.
Thanks,
SaradaHi,
103 columns need to be seen in at least 7 pages or more. Cant display in just 1 page.
I guess that better to create a smartforms and pass all the information from the table to the smartforms.
There you can create multipages.
Probably, that huge table need to separete it in 7 tables, so each page will get the information from one table...
i will try to do sth like that.
Regards
Miguel -
How to download internal table data to .xlsx file ?
Hello All,
I am using SAP ECC 6.0. I need to download internal table data to .xlsx file.
I tried GUI_DOWNLOAD, all the data are getting transferred to the .xlsx file, but while opening I am getting the below error.
Excel cannot open the file "download.xlsx" because file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file.
Though Microsoft office 2007 is installed in my system.
Please help <removed by moderator>.
Edited by: Thomas Zloch on Oct 24, 2011 10:55 AMHi,
Please find the below code to download data into excel file.
DATA: ld_filename TYPE string,
ld_path TYPE string,
ld_fullpath TYPE string,
ld_result TYPE i.
Display save dialog window
CALL METHOD cl_gui_frontend_services=>file_save_dialog
EXPORTING
window_title = ' '
DEFAULT_EXTENSION = 'XLS'
default_file_name = 'accountsdata'
INITIAL_DIRECTORY = 'c:\temp\'
CHANGING
filename = ld_filename
path = ld_path
fullpath = ld_fullpath
user_action = ld_result.
Check user did not cancel request
CHECK ld_result EQ '0'.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = ld_fullpath
filetype = 'ASC'
APPEND = 'X'
write_field_separator = 'X'
CONFIRM_OVERWRITE = 'X'
TABLES
data_tab = it_datatab[] "need to declare and populate
EXCEPTIONS
file_open_error = 1
file_write_error = 2
OTHERS = 3.
Thanks and Regards
Chitra -
How to Populate Internal table data to Table Control in a Report Program
Dear All,
How to Populate Internal table data to Table Control in a Report Program? It is a pure report program with out any Module pool coding involved, which is just used to display data. Till now it is being displayed in a report. Now the user wants the data to be displayed in a table control. Could someone tell me how to go about with this.
Thanks in Advance,
Joseph ReddyIf you want to use a table control, you will need to create a screen.
In your report....
start-of-selection.
perform get_data. " Get all your data here
call screen 100. " Now present to the user.
Double click on the "100" in your call screen statement. This will forward navigate you to the screen. If you have not created it yet, it will ask you if you want to create it, say yes. Go into screen painter or layout of the screen. Use the table control wizard to help you along the process. It will write the code for you. Since it is an output only table control, it will be really easy with not a lot of code.
A better way to present the data to the user would be to give it in a ALV grid. If you want to go that way, it is a lot easier. Here is a sample of the ALV function module. You don't even have to create a screen.
report zrich_0004
no standard page heading.
type-pools slis.
data: fieldcat type slis_t_fieldcat_alv.
data: begin of imara occurs 0,
matnr type mara-matnr,
maktx type makt-maktx,
end of imara.
* Selection Screen
selection-screen begin of block b1 with frame title text-001 .
select-options: s_matnr for imara-matnr .
selection-screen end of block b1.
start-of-selection.
perform get_data.
perform write_report.
* Get_Data
form get_data.
select mara~matnr makt~maktx
into corresponding fields of table imara
from mara
inner join makt
on mara~matnr = makt~matnr
where mara~matnr in s_matnr
and makt~spras = sy-langu.
endform.
* WRITE_REPORT
form write_report.
perform build_field_catalog.
* CALL ABAP LIST VIEWER (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
it_fieldcat = fieldcat
tables
t_outtab = imara.
endform.
* BUILD_FIELD_CATALOG
form build_field_catalog.
data: fc_tmp type slis_t_fieldcat_alv with header line.
clear: fieldcat. refresh: fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic = 'Material Number'.
fc_tmp-fieldname = 'MATNR'.
fc_tmp-tabname = 'IMARA'.
fc_tmp-outputlen = '18'.
fc_tmp-col_pos = 2.
append fc_tmp to fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic = 'Material'.
fc_tmp-fieldname = 'MAKTX'.
fc_tmp-tabname = 'IMARA'.
fc_tmp-outputlen = '40'.
fc_tmp-col_pos = 3.
append fc_tmp to fieldcat.
endform.
Regards,
Rich Heilman
Maybe you are looking for
-
Once contract created PR should be closed
Hi, We want to close PR automatically when Contract created with reference to this PR? I tried this but my PR is not closed.Is there any way closing PR automatically when Contract created with refe. with this PR? Any solution for this? or This is SAP
-
Web Proxying to a WebLogic Cluster using the HTTPS protocol
Hi all, I am recently involved into JWS proxying to WebLogic Cluster. I don't have any technical problems at the moment but "conceptual" problems, that is: - my jws proxy server should connect to a WebLogic Cluster through a Bea plugin configured wis
-
My Macbook Pro stays on a blue sceen after start up. It won't boot into safe mode (holding down the shift key). What do I do?
-
Mail Doesn't Recognize Mailboxes After Migration
I just migrated all my data from one Mac Mini to a new one (both running 10.9.1). Everything appears to have migrated properly, and the new machine is a clone of the old - except for Mail. When I open the Mail app, instead of displaying the various
-
I am trying to update to IOS5 but my IPad is not giving me the option to update. How can I get the update?