Need help me in fixing the LOAD issue

Hi,
       I am loading data from BW (two) ODS to APO Cube using data marts.. One ODs is fine and with the other ODS i am getting the load error.. please see this error.
(Characteristic value '000000000000040130 ' of characteristic Z9AMATNUM is not ALPHA -con     BRAIN     68)     
I tired looking in Z9AMATNUM char and i dont see any mistake and in the update rules i mapped to Z9AMATNUM<---0Material
Please help me in finxing this issue..
thanks
arya

Hi,
The InfoObject will have the ALPHA routine checked. Remove the routine and repeat the load.
Conversion Routines in BW
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b9119290-0201-0010-69af-96fe3bf00243
Frequently Asked Questions - ALPHA Conversion
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7108a690-0201-0010-4cbc-9bca94f9ad9c
OSS note 447341 is about the ALPHA conversion
Conversion Routines in the BI System 
http://help.sap.com/saphelp_nw70/helpdata/en/2b/e9a20d3347b340946c32331c96a64e/frameset.htm
Hope this helps.
Thanks,
JituK

Similar Messages

  • On (release) action problem - how to fix the loading issue?

    Hi,
    I'm making a progress with the website in Flash. I have pretty much things already done. Motion tweens that change alpha in percentage ammount are working correctly - I've used them for loading pages but I encountered a one tiny problem...
    Describing the website: there are buttons that - when you click - play an animation (motion tween with alpha changing) to load a proper page that is pinned with a particular button. So: home button loads the home page, bio button loads the bio page etc. All pages go with the motion tween - they fade in the website (from alpha 0% to 100%). Everything is fine and the website with everything works just perfect! But: there's one thing that doesn't keep me calm. When I open my website in a browser to test it and I click on each button to load pages - everything is ok, but when I want to click the same button few times - other things are being loaded by clicking the same button.
    For instance: I click the "bio" button once and it loads my biography page with the motion tween as I described before. But when I want to click it secondly or thirdly it doesn't load my biography page anymore but a page before that one (in this case: home page). When I click it again the button loads my bio page again. So - in sum - it doesn't load the same page all the time, but randomly: the proper one or the one before (in the timeline).
    My AC code for each button is simple, for example:
    on (release) {
        gotoAndPlay(173);
    Also I've got the "actions" layer that carries stop(); command in places that are for it.
    I tried with _root.gotoAndPlay and also with frame_number +1 and always the same problem.
    I hope it isn't anything serrious and can be fixed.
    I'll be very grateful for help.
    Greets!
    J.J.

    As I explained in my post: I test my website in the browser (firefox), I click on a particular button which loads a particular section. It works with all buttons but sometimes when I click the button an incorrect section appears.
    For example: I click biography button, and the biography section appears. Then I click contact button and contact section appears. Then when I want to see biography section again and click on the biography button, the biography section doesn't appear but the other section appears, for instance: home section, about section, gallery section or other from what I have.
    Concluding from the entire description I've placed above in the topic I don't know why this thing happens and I need some help how to fix this issue of loading sections firstly correct and then, after some clicking - incorrect.
    I hope I really presented it clearly.

  • Unmountable Boot Volume, need help. trying to fix the problem via lan if posible?

    any information i could recieve from Geek Squad would be appreciated.  i have my computer purchased from best buy that i'm happy with, but my cousin's computer died with the unmountable boot volume error.  i want to use my computer to fix his, or if possible fix his directly from the internet.  any assisstance in this would be nice. thank you.

    Hi AngeNeedsHelp!
    I hope your cousin got the computer fixed. However,
    this Unmountable Boot Volume error is not always fixed by simply reinstalling
    the Operating System (OS). In fact, you may need to back up the drive using an
    external USB Hard Drive Enclosure.  Even
    then the drive may not be readable if there are physical errors/damage, and
    this is nearly impossible to do over the internet since they likely cannot boot
    the computer?  If there is important
    information on the drive I would recommend taking it to a professional such as Geek
    Squad® before attempting anything.  Best
    of luck!
    Matthew|Community Advocate | Best Buy® Corporate
    Visit our Channel on
     Private Message

  • IOS 7.0.3 did not fix the mirroring issue with ATVs and AirServer.  Anyone have an idea what needs to be done?

    iOS 7.0.3 did not fix the mirroring issue with ATVs and AirServer.  Anyone have an idea what needs to be done?  The only solution we have found is to reboot the iPad.  We don't have the option of restarting the wireless as so many people are on and it would further disrupt classes. 

    iOS 7.0.3 did not fix the mirroring issue with ATVs and AirServer.  Anyone have an idea what needs to be done?  The only solution we have found is to reboot the iPad.  We don't have the option of restarting the wireless as so many people are on and it would further disrupt classes. 

  • Hi I need help on how fix my security questions it tells me to resend questions to email but the email it's asking me to send them to i don't know that email it's not mine !

    Hi I need help on how fix my security questions it tells me to resend questions to email but the email it's asking me to send them to i don't know that email it's not mine !

    You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
    (97724)

  • MSI didn't fix the temp issue

    MSI didn't fix the temperature issue for AMD 64 processors. I'm sure.
    For people who didn't read my previous posts;
    MSI claims in BIOS 1.4 (for the MSI K8N Neo Platinum) that they fixed the problem that the CPU gets (for example) 54 degrees idle and 74 degrees load.
    They didn't. They just made up a fake solution.
    Here are my arguments.
    - When I start my computer, after a cold long night in which the computer was turned off, I see 42 degrees for my CPU in the BIOS. This is when I go DIRECTLY to the BIOS in the POST. 42 degrees? That is impossible. The temperature in my room is around 20. It can't get so high so fast. My Northbridge is 21. In the old BIOS 1.3 it was the same; when you started your computer the BIOS showed temperatures like 52 etc.
    - When my computer has started Windows XP, I start Core Center. There I see my CPU temperature. It is 39 degrees for my CPU. Ridiculous. My old AMD XP 1800+ started with a minimum of 29 when Windows started. After that the 1800+ increased to 48 degrees.
    But ok, when I use the trick which some people used in BIOS 1.3 to get true readings (restarting their computer with a soft boot), I see 34 degrees for my CPU. This reading is the only true reading. Isn't it weird that when I have my computer turned on for about 4 hours, with whole the time readings like 42 degrees idle, and I restart, I just get 34 degrees... WITHOUT fluctuating temperatures to hell and back...
    My conclusion is that MSI just made something up like '74-20 = 54 degrees in load and 62-20 = 42 degrees idle'.
    Also, the temperatures are fluctuating to hell and back. It goes from 58 degrees in load to 54 to 50... Whatever...
    This board is great, but this problem really, really  s u c k s. FIX this. We have the right of correct temperature readings. We spend money for it.
    Regards,
    Me

    Quote
    Originally posted by Tiresmoke
    I know you are frustrated but if you read the link I just supplied you will find this is a user to user forum and NO MSI techs are here at all.
    Regardless, people are still encouraged to post their problems here as well.  In case there is a solution or workaround (see Wannafly's response and mine as well regarding vcore).
    Quote
    We are users helping each other. If you must speak with an MSI tech you can always contact them from the MSI main page. Oh and it is not likely they will answer if you attack them the way you are writing in this forum. Now would I for that matter.
    I do agree that some in this thread have crossed the line and need to watch it   .
    Quote
    So play nice folks or there won't likely be a second warning.
    Very good advice!  
    Quote
    Yes there can stilkl be temp issues especially with the newcastle core CPU's. The new Bios is still a work in progress. There are a lot of combinations they need to work out. But if you contact MSI with a complaint in a cival manner and let them know what experience you have you may even get a new beta bios to try and see if it will solve your issues. Or they may have other suggestions. However they can't fix stuff they are not aware are broken and most of the problems disappeared when they released 1.4. So let them know about what you have.
    Been there done that.  They were responsive in the beginning.  Continued to send them very polite and factual updates as I tried new BIOS updates but have long since ceased to receive any response at all.  Again, I say I don't blame MSI.  Just want a fix.....
    Quote
    Oh yes and running these chips in the 50C+ range at full load is still within reason.
    I reread the thread a few times, and I don't see where anyone is claiming that they feel like that's a problem, so I'm confused about the relevance of this statement .  The problem that's been mentioned here is that the temperature is being REPORTED at 50+C at IDLE load conditions when it obviously is NOT that hot.  Restart of the machine immediately then shows an IDLE temp of 30C.  Even though 30 seconds prior it showed 50C with just as low of a load since it was right after cold start?  THIS situation is NOT within reason....    And it's very repeatable, cause I see it every single day

  • Ggrrrrr, is there any that bios that fixes the temp issue? [solved]..spoke too soon [NOT SOLVED]

    ive tried
    1.1
    1.2
    1.3
    1.42
    come on msi, give me a fighting chance :(

    Here is the last thing I received from MSI tech support.  I'll give them this much, they are much more responsive than VIA or AOpen ever were when I first got my flakey MVP3 board...lol.  I hope they can figure this problem out!
    Quote
    So far in our own testing, we have not found any High CPU Temperature issues.
    We have gone through the threads you have provided to us and we will co-work with AMD to see if anything needs to be updated from our side with the New Castle Core.
    Once again, MSI appreciates all the findings/reports you have provided to us and we will update you once there is any findings becomes available.
    Sincerely,
    Technical Support Division
    MSI Computer Corp.
    http://www.msicomputer.com
    MSI - Beyond Expectations!  
    1-626-913-0828
    1-626-581-7721 Fax
    Due to high volume of cases daily, we may not be able to answer question promptly. Please kindly provide your name, phone number, model number, state in which you are calling from, a brief description of your problems, and we will try to reply your issue as promptly as possible. Thanks
    The information transmitted is intended only for the person or entity to which it is addressed and contained confidential and privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient are prohibited. If you receive this in error, please contact the sender and delete the material from any computer.
    -----Original Message-----
    From: my email deleted
    Sent: Friday, August 06, 2004 8:51 AM
    To: [email protected]
    Subject: RE: 3 -- Customer Problem Description Form
    I know you guys think you fixed the Newcastle temperature problem.  But there are still a LOT of us out here who are having trouble, using latest BIOS.  People are reporting this all over the MSI forums.  The behavior is as follows, flashing the BIOS might help initially, but soon after the temp shoots way back up.
    Please see the following threads:
    Temps and BIOS 1.42
    ggrrrrr, is there any that bios that fixes the temp issue? [solved]..spoke too soon [NOT SOLVED]
    Possible fix for CPU temp problem found.
    The same old problem with temperatures (K8N Neo Platinum)
    K8N Neo Temps :(

  • I actually need help but cannot find the answer. Please.......Lately when open a new tab it does not open with a blank page. I don't want to set my homepage as

    I actually need help but cannot find the answer.
    Please.......Lately when open a new tab it does not open with a blank page. I don't want to set my homepage as blank as when I first open Firefox, it automatically loads my hotmail page. But then if I open other pages I don't get a blank page. Help, please?
    Thank you.
    ''[Personal information removed by moderator. Please read [[Forum and chat rules and guidelines]], thanks.]''

    hello, please refer to [[New Tab Page – show, hide and customize top sites]] in order to switch the feature off.

  • How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

    How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

    This is a typical response from the manufacturer. Did you try the fix that Lawrence mentioned. When Apple or any other phone manufacturer update phone software, they have the latest Bluetooth installed. It is usually the problem with the radio manufacturer that they devices are using the older Bluetooth protocols. You can try this support document http://support.apple.com/kb/TS3581 and see if anything there helps, but generally it requires the radio manufacturer to update their firmware.

  • Does the Imovie 6.0.3 update fix the stability issues?

    Hi,
    Been using Imovie 6.0.2 a fair bit lately, and have had quite a few crashes. I see from this forum that I'm not the only one.
    I haven't yet been able to update to the latest version (6.0.3) released last week, and would like some user experience opinions about whether the update has fixed the stability issues. Anybody noticed any improvements or otherwise?
    My crashes seem to happen pretty randomly, it could be when you're putting a transition in, or just when you click Play or move the playhead. Any time really. I get the little spinning circle and Imovie is hung. Tried leaving it for ages just in case it was eventually going to return, but it doesn't.
    Has the patch fixed it?
    cheers,
    Ian

    Software Update says I have nothing that needs updated. Since I know this isnt true, I went to Downloads and attempted to install both updates--it stopped and said I had to go back to the previous download. After a couple journeys back to nowhere, I gave up.

  • How to fix the Timing issue in Discoverer reports

    Hi,
    While running the discoverer report in Discoverer plus is taking more than 1 hour to complete( Gen.time + Extract to excel)
    where as the same report completes quickly in discoverer desktop.
    how to fix the timing issue in discoverer plus 
    Thanks
    Srinivas

    Timo Hahn wrote:
    There is a problem with autoHeightRows and columnStretching used together in 11gR1.
    Have you tried without columnStretching?
    Or have you tried if it works in 11gr2?
    TimoHi Timo, Thank you very much for taking time to respond to my question.. :)
    Back to my question...
    I tried removing the columnStretching although my requirement really requires this but no effect really happens even if I remove this.
    Based on my investigation on the generated HTML, I notice the following items:
    1. A table is being wrapped in a div that is being set at a fixed height.
    2. On first load, if your autoheight rows is set to 6, the framework is setting a height of 96px to the div. This height would almost cut the last row of the table.
    3. If you try to refresh the page or try to re-PPR the component, the framework resets it to 102px which causes the last row to be fully displayed.
    My only concern is that IE is perfectly displaying this while Chrome and FF are having problem.
    Based on my understanding, the framework is messing up the height only on first load. Not sure but this is how I see it. I am really not confident also on my findings
    and I would most likely hear other's comment.
    Thanks.

  • Yosemite made my MacBook Pro so slow !! Need help ? what is the solution?

    Yosemite made my MacBook Pro so slow !! Need help ? what is the solution?

    I've ran a benchmark on my Mac (iMac early 2009). Performance of Yosemite in general was about the same as Mavericks. But that can be different on other Mac's of course. Safari is mostly a bit slower. It's recommended you clean your old internet-caches and then restart Safari. (you can use a little app called CCleaner to do that). That might make a difference. Speed-issues are usually solved in the first and second update of OS X.

  • Hi plZ help me to fix the error to my Blackberry 9300 Uncaught exception: java.lang.​NullPointe​rException

    ;   hi good plzz do help me to fix the error to my bb9300 i just update my bb9300 the the i see 
    error b    Uncaught exception: java.lang.NullPointerException    anyone here can help me to fix i appreciate

    I am guessing that you are not a Java developer, and it is not your application that is causing the Null Pointer Exception. 
    It sounds like you have updated the OS on your Blackberry device and one of the applications that you have installed is not coping with the upgrade.  
    If you press on an application icon and then that causes the error, then you know there is a problem with that application and so you need to report this to the developers of that application and get an updated version. 
    If this is happening when you restart your device, then it appears that one of the installed applications is failing at start up time and so it is not obvious which application.  So you need to see which of your applications doesn't appear to be providing all the functions it used to, and it would be a good guess that it is that application that is causing the problem.  Again you need to go back to the developer to get an update. 
    Let us know if that does not help.
    Also you have posted in the Java developer forum.  If this really is not your program causing the problem, then I suggest a better place to post a question relating to the 9300 is in the appropriate device forum here:
    http://supportforums.blackberry.com/t5/BlackBerry-​Curve/bd-p/Curve

  • Need a Badi to look the good issue status for prod order before good receipt in MIGO

    Hi ,
    Need a Badi to look the good issue status for compoents for prod order before good receipt in MIGO.
    Example : There are 10 comps need to be issued to production order to make any assy but 6 comps were issued
    and remaining 4 comps are not yet issued.,in this situation if I try to do goods receipt for prod order through MIGO.,system should populate the warning
    message saying still goods issue are pending for prod order.
    Please advise .
    Thanks
    Prasad

    Hi Prasad,
    Before trying with a BAdI, have you tried to control this behaviour thru the Order confirmation parameters (OPK4)?
    Note that you can have a termination in case of having problems in the goods movements..
    Take a look of this and the SAP help:
    Termination of Confirmation if Incorrect Goods Movements
    Controls if the confirmation is terminated in the event of incorrect goods
    movements.
    Use
    This enables you to terminate the confirmation in the event of incorrect
    items, for example, to prevent postprocessing records.
    Dependencies
    The indicator is only evaluated if either no process control key or one
    process control key has been stored that enbles the goods movements to be posted
    in dialog AND for which the "provide error handling for goods movements"
    indicator is active. If there are incorrect goods movements, the system behaves
    as follows:
    A log is issued that gives information on the incorrect goods movements
    If these incorrect goods movements are determined by inventory management,
    then the option of correcting these errors is offered in the error handling
    If the correction is not successful, the confirmation is terminated
    Kind Regards,
    Mariano

  • HT1430 guys, I need help, im trying to the the new software IOS 7.0 and it requires 3.7 GB free space. im using the IPhone4 and it had 6.4 GB capacity. i've deleted so much and it still says I only have 1.4 GB, I dont understand where the 5GB are being us

    guys, I need help, im trying to the the new software IOS 7.0 and it requires 3.7 GB free space. im using the IPhone4 and it has 6.4 GB capacity. i've deleted so much and it still says I only have 1.4 GB, I dont understand where the 5GB are being used.
    has any one experienced that? I cancelled my icloud account coz i tot the 5GB where there. im so confused. please help.
    Dee

    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Maybe you are looking for