Need help on automatically signed in.

In a servlet class,
I know that using this statement will redirect the user's browser to the yahoo email login page:
String username="abcdefg";
String password="password";
response.sendRedirect("http://mail.yahoo.com");However, the user will have to enter the username and password in the login page to proceed to the mailbox.
what i want is that the user's browser will be redirected to the user abcdefg's mailbox page.
I have already read the API specs of some classes (Session, ServletRequest, ServletResponse, HttpServletRequest, HttpServletResponse, Store, Properties...etc) but still got no idea on how to accomplish this job.
Please provide me with some codes. Thank you very much for your help.

Normally, login pages use the POST method to transmit the user ID and password. That's so they don't show up as URL parameters. But redirecting always uses the GET method. So there isn't any way to do what you are trying to do.

Similar Messages

Urgent: Need help in automatic credit control

Hi SD Seniors
Please help me in the URGENT Credit check Control Configuration.
According to the user requirement, need to have simple static credit control in the place of sales order & delivery.
When credit check fails during the order creation,
1.     Wants to popup the warning message without blocking the delivery
2.     And wants to block the delivery from the PGI process.
I have already done the necessary credit check configuration in my test system. Based on the simple credit limit check,
System issues the warning message correctly at the time of order creation.
And I have configured the automatic credit check control configuration for the blocking the delivery PGI steps. But system doesnt block
The delivery and it still allow proceeding for PGI without any error message.
Please refer by below automatic credit control check for blocking the delivery. Please let me know, is there any other step I missed out here.
1. Credit control area is assigned to the company code.
2. Credit control area is assigned to the sales area.
3. Credit control area is assigned to the payer.
5. OBZK:   Assigned
7. Risk category for each credit control area.
8. OVA8: -Credit control area + Risk category + Credit group
9. FD32: -Credit limit, Risk category, Currency: assigned
10. OVA7/VOV7: - Activated correctly
11. V/08: - Pricing Procedure subtotal set to A
12. OB45: - Update Group 00012
Your help is very much appreciated.
Thanks in advance
Regards
Priyan

Karan, Thanks For you Quick Response.
OVO8: Cr.Ctrl.Area + Rick.Catg + Credit.Group (03)
The same credit group was assigned to the OVAD also.
OVAD: Dely.credit.grp = 03   (Credit group for goods issue)
AND
GI.Credit.group = 03 (Credit group for goods issue)
Is it correct?
My doubt is where exactly, we are telling the system to block the delivery.
In OV08, could you please tell me what are all the settings need to be done for
block delivery PGI
Regards
Priyan

Need help to automate a process

Hello friends,
We have customized the program RPRCCC00 for credit card clearing.
WE run this program for diff. countries. It reads the credit card expense file
from application server. We daily receive the file names in mail.
After this we run PRCCE for correction and PRCCF for downloading the corrected
files. At end we run PRCC to load the corrected files.
Is there any way to automate this entire process. Because daily it takes
2 hrs to complete the credit card clearing.
Please help.
Thanks
shlesha

Hi Shlesha ,
What you can do is ,
You can first make a Prog which reads the file country wise from the particular folder on say application server and pass the file in the prog RPRCCC00 and return
if the above process completed sucessfully
then u can feed the output in the second program i.e. PRCCE again through submit and return
and then I u download the file through PRCCF into another folder .
Now run another job for PRCC which will upload the file and process.
Incase u have XI system in place it can take care of transferring the files from email into a desired location on the server..
You will have to discuss the feasibility of the process with your functional as well as ur technical team...
This is going to need strong functional and techno inputs ...
Thnks
Sahil

Need HELP getting my signed certificate to be recognized by Extension Builder in Eclipse! Getting Error in Windows!

When I use Extension Builder 3 in Eclipse to package my files into a .zxp ... I get an 'invalid certificate' error. Working in Windows, with Photoshop CC 2014.
This .p12 certificate does currently work find in Configurator 4 for my CS6 panels.
Please help me get this working! Thank you!

Hi hdbrew,
"extension doesn't contain a valid signature" is a warning message that I've got in the past when Adobe Extension Manager (AEM) wasn't up to date - so you might check whether you've the latest version here: https://creative.adobe.com/en/products/extension-manager.
Paid vs. Free (self signed) certificates: I had a paid one in the past (no AEM warnings) but there are a couple of shortcomings IMHO:
1. With Adobe Add-ons, AEM and its warning alerts are bypassed altogether (files are deployed via the CC app) - so from the user point of view there's no difference between self-signed and paid certificates.
2. An extension signed with a paid certificate stops working when the certificate expires. Self signed ones keep working even past the expiration date.
And three, I find it "peculiar" to pay a third party authority to certificate Adobe that I am who I am in order to be allowed to developed for... Adobe itself (lot of words to say: free is cheaper ).
Extension Builder for bundling: as I wrote, personally I don't use EB - it's not been updated in a while (it's been acknowledged by the EB team too - who has kept releasing updates as CEP libraries) and I prefer a simple code editor + command line for signing and packaging, so others can be more helpful than me.
Yet, if you don't need to package an hybrid extension, it's a matter of a simple line, such as:
./ZXPSignCmd -sign yourSourceFolder yourDestFolder/yourExtensionName.zxp yourCertFile.p12 yourCertPassword -tsa https://timestamp.geotrust.com/tsa
Conversely, if you need to go hybrid (i.e. to deploy extra stuff alongside with your extension, e.g. a plugin) it's a matter of compiling an MXI file and the whole process is slightly more complex. Anyway, you can find information in the blogpost I mentioned earlier (the full series of 16 Tips so far is here).
Regards,
Davide Barranca
www.davidebarranca.com
www.cs-extensions.com

Need help w/ recycling sign

I'm trying to put together a pretty basic recycling sign but I can't figure out how much bend to put on the arrows to make a circle.
This is what I'm trying to get.
http://www.istockphoto.com/stock-illustration-5570467-recycling-icons.php
I've been trying various bend percentages w/ the arch tool, but every variation I try ends up looking off when I arrange them into the circle...anyone know what I'm doing wrong and/or need to do to make a legit circle?
Thanks in advance for the help!

MHM,
You may, using X=Y=0 as centre:
1) Create two concentric circles corresponding to the outer and inner side of the curved shaft;
2) Create a somewhat larger centred circle to hold everything else for correct rotation;
3) Create a straight path from the centre with a length corresponding to the inner diameter (or the average diameter) of 1);
4) Rotate a copy of the path with the outer centre to get the arc you wish between them;
5) Counter rotate the copy path from 4) if you want the butt end of the arrow skewed like in the link, possibly to match the angle of the arrowhead;
6) Select the paths and the circles 1) and Pathfinder>Divide;
7) Create a triangle to be the head, place it by its end, and Pathfinder>Add to shape area;
8) Object>Rotate 120 degrees twice as copies with the large;
9) Delete the large circle.

Beginner- need help to automate a device using labview

Hi,
I am a graduate student pursuing my masters in mechanical engineering. I have been asked to work on a project that involves automating a gas plasma surface cleaner using labview. Since i have no knowledge about electrical equipments and this is the first time i am using labview, i would need some help so that i can get started with the project. so, basically the equipment is a small box inside which surgical tools can be placed and sterilized. Once the surgical tool is placed, the door is shut manually and the glass chamber is depressurized and then injected with a hydrogen peroxide gas. Then the plasma discharge is started by switching on the equipment. It runs for about 3 minutes, and then we manually re-pressurize the chamber and open the door to take out the tool. I will have to automate this process. Please let me know how to get started in terms of integration of the equipment with labview etc and things i need to know. Also, let me know if you need more details.I could also attach a picture of the equipment if needed.
Thanks,
Arvind

Arvind,
Since you are working on your Masters degree, it is likely that you already have a Bachelors dergree or equivalent. So I will assume that you know the basics of engineering. I will also assume that your previous classes did not actually teach you much about design or how to manage a project (because so many engineering schools do not teach that).
You have a statement in qualitative terms describing your project. The next thing to do is to specify in quantitative terms the parameters which are important to success of the project. Size of the box, pressures, temperatures, times, plasma densities, ... You will also need a sequence-of-events document which includes not only the basic process but also as many possible faults and failure modes as possible.
For example. Close the door manually. (How will the automated system know the door is shut? What will it do if the door does not shut within x seconds?) Depressurize the chamber. (To what pressure or vacuum level? How much time is allowed for this step? What if the pressure is still too high after the time limit? -- This suggests a leak.) Inject hydrogen peroxide. (How much? How will it be measured? What it the pressure/time/quantity is too high? Or too low?) ...
What kinds of sensors or measuring equipment are needed to answer all these questions? What kinds of output signals are generated by these sensors and instruments?
What kind of actuators or controllers are needed to perform the actions of the system? What kinds of signals do you need to generate to control these devices?
Does this device (as medical equipment) need to meet specific regulatory requirements? Steam sterilizers need to have certifiable measurements of the time and temperature inside the chamber. It may be necessary to have measurements independent from those used for the automation process.
Once you have a comprehensive specification document, then you begin to identify components, instruments, and systems which can satisfy the individual requirements. Then you figure out how to get everything to talk to everything else. That is where the programming language (which may be LabVIEW) comes in. The task of the program is to implement the communications between devices and users and to do much of the decision-making for the apparatus.
If you are not taking a course which teaches the basics of LabVIEW, you should start with the on-line tutorials. You can work on these while preparing the specification document.
Lynn

Need help with automatic slideshow

I made an automatic slideshow that switches frames at a set
interval but now i want to load each frame from an extrenal swf and
add a preloader for each frame, how do i tell the slideshow to wait
until the frame is loaded before it proceeds to the next frame, but
still have the movieclip be automatic. Also the slideshow can be
controlled mannually so i also want to know how to disable the
manual control till each frame is loaded.

Here is some of the action script for the slideshow.
This first bit sets up the automatic interval transitions in
the main movie timeline
function nextImage()
mc_slide.mc_transition.play();
} // End of the function
function waitImage()
clearInterval(slideTimer);
var slideTimer = setInterval(nextImage, timer * 1000);
nextImage();
} // End of the function
function pauseSlide()
mc_slide.mc_quicktransition.gotoAndPlay(2);
} // End of the function
var timer = 8;
var pauseTime = 20;
var slideTimer = setInterval(nextImage, timer * 2000);
stop ();
the movieclip loaders that load each movie clip are embedded
with the transition animation.
this is the code in the embedded mc-it loads the 1st movie
clip and allows the user to manually jump to any of the other movie
clips.
emptyMC.loadMovie("frame1.swf");
var pageAddress = "about:blank";
btn1.onRelease = function ()
_parent.pauseSlide();
gotoAndStop(1);
btn2.onRelease = function ()
_parent.pauseSlide();
gotoAndStop(2);
btn3.onRelease = function ()
_parent.pauseSlide();
gotoAndStop(3);
btn4.onRelease = function ()
_parent.pauseSlide();
gotoAndStop(4);
stop();
I need to know how to put the code for the automation of the
slideshow pause until each movieclip has finished loading and also
at the same time disable the manual control of the movie clips
before they are fully loaded.

Need help when I sign in not working

''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/978554 /questions/978554]''
I did try to follow the update things but could not get that. So how can I get my sign in working?
XXX
please help me get my sign in working
<sub>edit: removed personal information for your protection. (philipp)</sub>

when I sign in not working. I did try to folow the update but could not get that.
XXX
please help me get my sign in working
<sub>edit: removed personal information for your protection. (philipp)</sub>

Need help with Automatic Generating Form Numbers

Hello,
I am new to all this and have found myself stuck trying to figure out how to have my forms automatiacally generate a new number each time it is used. I tried looking through similar posts but do not understand the directions given there. If someone could help me figure this out I would really appreciate it. Thank you.

Before opening my forms for responses I am creating a column with my starting form number - 1. in the cell above(first response) I am setting an equation =B2 +1. All incoming responses automatically generate an ID number within my responses table. The form itself will not present the number, but if you were looking for an easy way to track responses w/ an ID it has worked well for me so far.

Need help with automatic page when a box is filled with a letter

I use the Adobe Livecycle Designer 8.0, version 8.0.1291.1.339988.
I'm trying to make a test for cars in Livecycle, where the car is tested and then there should be a box after every kind of test such as: Brakes front, brakes back, parking brakes, lights, engine, oillevel, exhaust system, clutch and so on..
When a specific letter is written in the box a page should pop-up where the tester can write what the problem is. And then afterwards continune with the rest of the test.
In the box, there should be four choices, a G, R and A. When there's a G there shouldn't pop-up a page, because that part is fine. But when there's a R (reparation) and an A (remark), this page should pop-up with the text of what part of the car it is and a text-field where the mechanic that tests the car can write what needs reparing or what's a remark.
Can anyone help me? I really would appriciate it!
Jacob Langer

To support what King_Penguin has provided, here is a support document that describes the steps to take with a device in Recovery Mode. If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

Need help with automatic printing of a page

I am looking for inputs for a particular scenario; On the Oracle HR Self-service pages, once the employee adds/updates his personal details and submits his changes to be approved by the HR manager, the final confirmation page should be automatically routed to a particular printer and be printed. Can this functionality be achieved with OAF coding for the Submit button?

Hi,
Check this link, it will help you.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/collaboration">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/collaboration</a>
Dont forget to close the thread when answered.
Regards,
Amit

I need help with iTunes sign in, I get an error!

When ever I try to sign in to my iTunes account, I just get "We could not complete your iTunes Store request. An unknown error occurred (-9808) There was an error in the iTunes Store. Please try again later"
I have been "trying again later" for months! What can I do to FIX THIS?

Check your internet settings.
Control Panel – Internet Options – Advanced
Uncheck “Check for server certificate revocation (requires restart)”
Click okay

Need help with adobe sign-in

Every time I sign-in to my adobe account, it said unable to load wsdl. What is a wsdl url

WSDL generally refers to the widget browser, which is no longer available and hasn't been for some time.
You can browse add-ons here now: https://creative.adobe.com/addons

Need help with automatic resizing of images

I am working with a liquid template in dreamweaver and when I insert my banner image and preview the page, the image stays the same size while the page template expands with the screen resolution.
How can I set the image so it automatically expands with the page?

Expanding an image in this way isn't really the best way of doing things, because depending on the image it can get very distorted when it's increased or decreased in size. You are better off selecting a background colour and blending the image into that, so that when the browser window is increased you see the majority of the image, but on larger monitors, the image is blending into the background on either side of that image.
There is a technique that may make this possible - I did read something about it at one point, but didn't save the URL. However, the above method is probably the most reliable way of doing what you want.

Need help in automating batch placing of images on spreads

My workflow is :
I have jpeg files (mostly 100+).
They are the size of 2 pages (e.g. 1 spread per jpeg file)
I need to place them on either even or odd page (aligned Top-Left).
Currently I’m doing this work manually.
Need help to automate this.
Thanks and regards.

As I mentioned earlier I have very little experience with JavaScript.
I also copied the ImageCatalog script to a new file and read it atleast five times, and tried to wrap my head around the flow of execution.
The comments were really helpful in the process.
I proritized what i want to achive with my script and started deleting unwanted code. I also tested it frequently.
Here is my script as it stands right now.
function Init(){
        var myFilteredFiles;
        //Make certain that user interaction (display of dialogs, etc.) is turned on.
        app.scriptPreferences.userInteractionLevel = UserInteractionLevels.interactWithAll;
        myExtensions = [".jpg", ".jpeg"]
        //Display the folder browser.
        var myFolder = Folder.selectDialog("Select the folder containing the images", "");
        //Get the path to the folder containing the files you want to place.
        if(myFolder != null){
                    if(File.fs == "Macintosh"){
                        myFilteredFiles = myMacOSFileFilter(myFolder);
                    else{
                        myFilteredFiles = myWinOSFileFilter(myFolder);
                    if(myFilteredFiles.length != 0){
                            myPlaceImages(myFilteredFiles);
                            alert("Done!");
// call the initial function
Init();
//Windows version of the file filter.
function myWinOSFileFilter(myFolder){
          var myFiles = new Array;
          var myFilteredFiles = new Array;
          for(myExtensionCounter = 0; myExtensionCounter < myExtensions.length; myExtensionCounter++){
                    myExtension = myExtensions[myExtensionCounter];
        myFiles = myFolder.getFiles("*"+ myExtension);
                    if(myFiles.length != 0){
                              for(var myFileCounter = 0; myFileCounter < myFiles.length; myFileCounter++){
                                        myFilteredFiles.push(myFiles[myFileCounter]);
          return myFilteredFiles;
function myMacOSFileFilter(myFolder){
          var myFilteredFiles = myFolder.getFiles(myFileFilter);
          return myFilteredFiles;
//Mac OS version of file filter
//Have to provide a separate version because not all Mac OS users use file extensions
//and/or file extensions are sometimes hidden by the Finder.
function myFileFilter(myFile){
          var myFileType = myFile.type;
          switch (myFileType){
                    case "JPEG":
        return true;
                              break;
                    default:
                    for(var myCounter = 0; myCounter<myExtensions.length; myCounter++){
                              var myExtension = myExtensions[myCounter];
                              if(myFile.name.indexOf(myExtension)>-1){
                                        return true;
                                        break;
          return false;
function myPlaceImages(myFiles){
        var myDocument = app.documents.item(0);
        var myDocumentPreferences = myDocument.documentPreferences;
        var myNumberOfFiles = myFiles.length;
        alert(myNumberOfFiles);
        var myNumberOfPages = (myNumberOfFiles * 2) + 1;
        myDocumentPreferences.pagesPerDocument = myNumberOfPages;
        var myPage = myDocument.pages.item(0);
        var myPages = myDocument.pages;
        for (myCounter = myDocument.pages.length-1; myCounter >= 0; myCounter--){
            if(myCounter%2 == 1){
                 myPage = myPages.item(myCounter);
                var myLiveWidth = myDocumentPreferences.pageWidth
                var myLiveHeight = myDocumentPreferences.pageHeight
                myY1 = 0
                myY2 = myLiveHeight
                myX1 = 0
                myX2 = myLiveWidth * 2
                myRectangle = myPage.rectangles.add(myDocument.layers.item(-1), undefined, undefined, {geometricBounds:[myY1, myX1, myY2, myX2], strokeWeight:0, strokeColor:myDocument.swatches.item("None")});
        for (myCounter = 0; myCounter < myNumberOfFiles; myCounter++){
            myFile = myFiles[myCounter];
            //alert(myFile);
            myRectangle = myDocument.rectangles.item(myCounter);
            myRectangle.place(File(myFile));
                    for (var myCounter = myDocument.rectangles.length-1; myCounter >= 0;myCounter--){
                              if (myDocument.rectangles.item(myCounter).contentType == ContentType.unassigned){
                                        myDocument.rectangles.item(myCounter).remove();
                              else{
                                        //As soon as you encounter a rectangle with content, exit the loop.
                                        break;

Need help on automatically signed in.

Similar Messages

Maybe you are looking for