Need help on deleting row

Hi
I am new in SAP B1, and was wondering how to delete a row in sales order matrix using DI? Sample codes would be great. Thanks

You could use the DI API to create the delivery note from the relevant sales order lines.
You can create a new Delivery object, and then add any lines from your sales order to it using the BaseType, BaseEntry & BaseLine properties. This gives you complete control over which lines will be added to the delivery.
Set sboDelivery = sboCompany.GetBusinessObject(oDeliveryNotes)
sboDelivery.CardCode = "C1000"
sboDelivery.DocDueDate = Date
sboDelivery.Lines.BaseType = 17
sboDelivery.Lines.BaseEntry = <DocEntry from Sales Order>
sboDelivery.Lines.BaseLine = <Line Number of Order you want to include>
'Continue to add additional lines as necessary
lngRetVal = sboDelivery.Add
John.

Similar Messages

Need help with Pivoting rows to columns

Hi,
I need help with pivoting rows to columns. I know there are other posts regarding this, but my requirement is more complex and harder. So, please give me a solution for this.
There are two tables say Table 1 and Table 2.
Table1
name address email identifier
x e g 1
f s d 2
h e n 3
k l b 4
Table2
identifier TRno zno bzid
1 T11 z11 b11
1 T12 z12 b12
1 T13 z13 b13
2 T21 z21 b21
2 T22 z22 b22
As you can see the identifier is the column that we use to map the two tables. The output should be like below
output
name address email identifier TRno1 zno1 bzid1 TRno2 zno2 bzid2 TRno3 zno3 bzid3
x e g 1 T11 z11 b11 T12 z12 b12 T13 z13 b13
f s d 2 T21 z21 b21 t22 z22 b22
Also we do not know exactly how many TRno's, zno's, etc each value in the identifier will have. There may be only 1 TRNO, zno and bzid, or there may be four.
All the values must be in separate columns, and not be just comma delimitted. There are also other conditions that i have to add to restrict the data.
So, can you please tell me what is should use to get the data in the required format? We are using Oracle 10g. Please let me know if u need any more information

Something like this ?
SCOTT@orcl> ed
Wrote file afiedt.buf
1 select a.name,
2 a.address,
3 a.email,
4 b.* from (
5 select distinct identifier
6 ,max(trno1) trno1
7 ,max(zno1) zno1
8 ,max(bzid1) bzid1
9 ,max(trno2) trno2
10 ,max(zno2) zno2
11 ,max(bzid2) bzid2
12 ,max(trno3) trno3
13 ,max(zno3) zno3
14 ,max(bzid3) bzid3
15 ,max(trno4) trno4
16 ,max(zno4) zno4
17 ,max(bzid4) bzid4
18 from (select identifier
19 ,decode(rn,1,trno,null) trno1
20 ,decode(rn,1,zno,null) zno1
21 ,decode(rn,1,bzid,null) bzid1
22 ,decode(rn,2,trno,null) trno2
23 ,decode(rn,2,zno,null) zno2
24 ,decode(rn,2,bzid,null) bzid2
25 ,decode(rn,3,trno,null) trno3
26 ,decode(rn,3,zno,null) zno3
27 ,decode(rn,3,bzid,null) bzid3
28 ,decode(rn,4,trno,null) trno4
29 ,decode(rn,4,zno,null) zno4
30 ,decode(rn,4,bzid,null) bzid4
31 from (select identifier,
32 trno,bzid,zno,
33 dense_rank() over(partition by identifier order by trno,rownum) rn
34 from table2)
35 order by identifier)
36 group by identifier) b,table1 a
37* where a.identifier=b.identifier
SCOTT@orcl> /
NAME       ADDRESS    EMAIL      IDENTIFIER TRNO1      ZNO1       BZID1      TRNO2      ZNO2       BZID2      TRNO3      ZNO3       BZID3      TRNO4      ZNO4       BZID4
x          e          g          1          T11        z11        b11        T12        z12        b12        T13        z13        b13
f          s          d          2          T21        z21        b21        T22        z22        b22
SCOTT@orcl> select * from table1;
NAME       ADDRESS    EMAIL      IDENTIFIER
x          e          g          1
f          s          d          2
h          e          n          3
k          l          b          4
SCOTT@orcl> select * from table2;
IDENTIFIER TRNO       ZNO        BZID
1          T11        z11        b11
1          T12        z12        b12
1          T13        z13        b13
2          T21        z21        b21
2          T22        z22        b22
SCOTT@orcl>Regards
Girish Sharma

Need Help to delet sort key! Please help!

Hi,
I have a problem in the following program.
Source Code:
t-belnr = bsid-zuonr.
SPLIT t-belnr at '#' into wk_belnr wk_x_belnr.
CLEAR t-belnr.
 t-belnr = wk_belnr.
 t-xblnr = bsid-belnr.
 IF t-belnr NE space.
 s-belnr = t-belnr.
 ELSE.
 t-belnr = t-xblnr.
 s-belnr = t-xblnr.
 ENDIF.
IF t-xblnr NE space. "WD041005a
 s-xblnr = t-xblnr. "WD041005a
 ELSE. "WD041005a
 s-xblnr = t-belnr. "WD041005a
 ENDIF. "WD041005a
 WHILE s-xblnr(1) EQ '0'. "INS MG130606
 SHIFT s-xblnr LEFT. "INS MG130606
 ENDWHILE. "INS MG130606
In the final ALV.
If first colum (t-zuonr) (sort key for the document )is blank, the document need to be deleted.
Question:
How can I write the code to deleted the t-zuonr when it is space?
Please help!!!
Thank you!!

Try as below:
DELETE <itab> WHERE <fld> IS INITIAL.
i.e
DELETE t WHERE zuonr IS INITIAL.
Kind Regards
Eswar

Need help regarding updated rows

Dear sir,
need help on this query
how many rows got updated when i execute an update statement

If you are executing update statement from sqlplus session.
Make sure "feedback" is turned on. It'll show numbers of rows updated just after the command;
SQL> update tt1 set col1 = 1;
0 rows updated.
SQL> show feedback
FEEDBACK ON for 1 or more rows
SQL> set feedback off
SQL> update tt1 set col1 = 1;
SQL>Details about this sqlplus system setting:
FEED[BACK] {6|n|OFF|ON}
Display the number of records returned (when rows >= n )
OFF (or n=0) will turn the display off
ON will set n=1
Regards,
Ullhas

Need help on deleting after exporting to IDML

Hi Forum,
I have a script to export all the "indesign files" found inside the folder... and then remove all the indesign files...
Instead, Can i have a help to delete....
the indesign file after exporting to IDML and then
continue opening the next indesign file, exporting to IDML and deleting it...
then continue file3....
The below is the script open indesign files and export to idml and then remove all the files inside the folder Desktop/GENERAL_CS6-IDML/IN_CS6
var mySourceFolder = Folder("Desktop/GENERAL_CS6-IDML/IN_CS6");
var myOutFolder = Folder("Desktop/Completed");
//var Indd_files = get_Files(mySourceFolder,[], ".indd");
var Indd_files = mySourceFolder.getFiles (/\.indd|\.INDD/i);
//var Indd_files = get_Files(mySourceFolder,[], ".indd");
if(Indd_files.length>0)
 for(var w=0;w<Indd_files.length;w++)
 try{
 app.scriptPreferences.userInteractionLevel = UserInteractionLevels.neverInteract;
 myDoc = app.open(File(Indd_files[w]));
 app.scriptPreferences.userInteractionLevel = UserInteractionLevels.neverInteract;
 var myDocNam = stripExt((Indd_files[w].name).replace(/%20/g," "))+"idml";
 myDoc.exportFile(ExportFormat.INDESIGN_MARKUP, (File(myOutFolder+"/"+myDocNam)));
// myDoc.save(File(myOutFolder+"/"+myDocNam));
 app.activeDocument.close(SaveOptions.no);
 }catch(E){}
try {
var copyFolder1 = Folder("Desktop/GENERAL_CS6-IDML/IN_CS6");
var myFiles2 = copyFolder1.getFiles(/\.indd|\.INDD/i);
for ( i = myFiles2.length-1; i >= 0 ; i-- ){
myFiles2[i].remove();
} catch (e) {}
Many thanks for the support..

I hope this is what you expected.
You can try the following code:
var mySourceFolder = Folder("Desktop/GENERAL_CS6-IDML/IN_CS6");
var myOutFolder = Folder("Desktop/Completed");
//var Indd_files = get_Files(mySourceFolder,[], ".indd");
var Indd_files = mySourceFolder.getFiles (/\.indd|\.INDD/i);
//var Indd_files = get_Files(mySourceFolder,[], ".indd");
if(Indd_files.length>0)
 for(var w=0;w<Indd_files.length;w++)
 try{
 app.scriptPreferences.userInteractionLevel = UserInteractionLevels.neverInteract;
 var myFile = File(Indd_files[w]);
 myDoc = app.open(myFile);
 app.scriptPreferences.userInteractionLevel = UserInteractionLevels.neverInteract;
 var myDocNam = stripExt((Indd_files[w].name).replace(/%20/g," "))+"idml";
 myDoc.exportFile(ExportFormat.INDESIGN_MARKUP, (File(myOutFolder+"/"+myDocNam)));
 app.activeDocument.close(SaveOptions.no);
 myFile.remove();
 }catch(E){}
Green4ever

I Need Help In Deleting Table row by clicking on "Delete" button inside the

Dear all,
first i'm new to Swing
i have created table with customized table model, i fill this table using 2d array, this table rows contains JButtons rendered using ButtonRenderer.java class and action listeners attached by the AbstractButtonEditor.java
what iam trying to do is when i click on a specified button in table row i want this row to be deleted, i found some examples that uses defaultTableModelRef.removeRow(index), but iam using customized table model and the following is my code
JTable tblPreview = new JTable();
 DbExpFormTableModel model = new DbExpFormTableModel();
 tblPreview.setModel(model);
//adding the edit button
 tblPreview.getColumn("Edit").setCellRenderer(new ButtonRenderer());
 tblPreview.getColumn("Edit").setCellEditor(new AbstractButtonEditor(new JCheckBox()));
 //adding the delete button
 tblPreview.getColumn("Delete").setCellRenderer(new ButtonRenderer());
 tblPreview.getColumn("Delete").setCellEditor(new AbstractButtonEditor(new JCheckBox()));
and here is the code of the code of my customized table model ( DbExpFormTableModel )
public class DbExpFormTableModel extends GeneralTableModel
 public DbExpFormTableModel()
 setColumnsNames();
 fillTable();
 private void setColumnsNames()
 columnNames = new String [5];
 columnNames[0] = "ID";
 columnNames[1] = "Database ID";
 columnNames[2] = "Prestatement";
 columnNames[3] = "Edit";
 columnNames[4] = "Delete";
 private void fillTable()
 int numOfRows = 2; // = getNumberOfRows();
 data = new Object[numOfRows][5];
 data[0][0] = "1"; //we must get this value from the database, it is incremental identity
 data[0][1] = "AAA";
 data[0][2] = "insert into table 1 values(? , ? , ?)";
 data[0][3] = "Edit";
 data[0][4] = "Del";
 data[1][0] = "2"; //we must get this value from the database, it is incremental identity
 data[1][1] = "BBB";
 data[1][2] = "insert into table2 values(? , ? , ? , ?)";
 data[1][3] = "Edit";
 data[1][4] = "Del";
and this is the GeneralTableModel class
public class GeneralTableModel extends AbstractTableModel implements Serializable
 public static Object [][] data;
 public static String[] columnNames;
 //these functions should be implemented to fill the grid
 public int getRowCount()
 return data.length;
 public int getColumnCount()
 return columnNames.length;
 public String getColumnName(int col)
return columnNames[col];
 public Object getValueAt(int row , int col)
 return data[row][col];
 //i've implemented this function to enable events on added buttons
 public boolean isCellEditable(int rowIndex, int columnIndex)
 return true;
 public Class getColumnClass(int c)
return getValueAt(0, c).getClass();
public void setValueAt(Object value, int row, int col)
//fireTableDataChanged();
data[row][col] = value;
fireTableCellUpdated(row, col);
And Now what i want to do is to delete the clicked row from the table, so please help me...
thank you in advance

Hi Sureshkumar,
1. Create a value attribute named select of type boolean.
2. Bind the checked property of all the checkboxes to this attribute.
3. Create an action called click and bind it to OnAction event of the button(whose click will check all the checkboxes) and write this code in that action.
wdContext.currentContextElement().setSelect(true);
Warm Regards,
Murtuza

Need help in deleting multiple tables

Hi,
In one of my scenario i want to delete One record from the table, but there are some child and sub child exist for the table. And the on delete cascade is not set fro any of the table.
Structure of my table,
Table-1
tab1_pk
tab1_name
Table-2
tab2_pk
tab1_pk
Table-3
tab3_pk
tab2_pk
i want to delete the record from Table-1 and all the related record of Table-2 and Table-3 in a single query.
Plz help

Dear 786725,
What has just came to my mind at first sight is that you can create a trigger for your approach. I don't think that a single query will delete some rows from more than one table.
Please go to the http://tahiti.oracle.com , select your database version and search for the after trigger. Hint: You may need to use the FOR EACH ROW clause and you again may need to use :old :new parameters in the trigger to have the information of what has just been deleted from the relevant table.
Hope That Helps.
Ogan
Edited by: Ogan Ozdogan on 05.Ağu.2010 19:00
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_7004.htm#SQLRF01405
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b31695/dialogs.htm#sthref454
4.24 Create Trigger
The following information applies to a trigger, which is which is a stored PL/SQL block associated with a table, a schema, or the database, or an anonymous PL/SQL block or a call to a procedure implemented in PL/SQL or Java. The trigger is automatically executed when the specified conditions occur.
Schema: Database schema in which to create the trigger.
Name: Name of the trigger. Must be unique within the database.
Add New Source in Lowercase: If this option is checked, new text is entered in lowercase regardless of the case in which you type it. This option affects only the appearance of the code, because PL/SQL is not case sensitive in its execution.
Trigger tab
Trigger Type: The type of object on which to create the trigger: TABLE, VIEW, SCHEMA, or DATABASE. (The remaining items depend on the type of trigger.)
Table Owner or View Owner: For a trigger on a table or a view, the name of the owner of the table or the view.
Table Name or View Name : For a trigger on a table or a view, the name of the table or the view.
Before or After: For a trigger on a table, select Before to cause the database to fire the trigger before executing the triggering event, or select After to cause the database to fire the trigger after executing the triggering event.
Statement Level or Row Level: For a trigger on a table, Statement Level fires the trigger once before or after the triggering statement that meets the optional trigger constraint defined in the WHEN condition; Row Level fires the trigger once for each row that is affected by the triggering statement and that meets the optional trigger constraint defined in the WHEN condition.
Insert, Update, Delete: For a trigger on a table or a view, Insert fires the trigger whenever an INSERT statement adds a row to a table or adds an element to a nested table; Update fires fire the trigger whenever an UPDATE statement changes a value in one of the columns specified in Selected Columns (or in any column if no columns are specified); Delete fires the trigger whenever a DELETE statement removes a row from the table or removes an element from a nested table.
Referencing - Old: For a trigger on a table, the correlation names in the PL/SQL block and WHEN condition of a row trigger to refer specifically to old value of the current row.
Referencing - New: For a trigger on a table, the correlation names in the PL/SQL block and WHEN condition of a row trigger to refer specifically to new value of the current row.
Available Columns: For a trigger on a table, lists the columns from which you can select for use in an Update trigger definition.
Selected Columns: For a trigger on a table, lists the columns used in an Update trigger definition.
When: For a trigger on a table, an optional trigger condition, which is a SQL condition that must be satisfied for the database to fire the trigger. This condition must contain correlation names and cannot contain a query.
Schema: For a trigger on a schema, the name of the schema on which to create the trigger.
Available Events: For a trigger on a schema or database, lists events from which you can select for use in the trigger definition.
Selected Events: For a trigger on a schema or database, lists events used in the trigger definition.
DDL tab
This tab contains a read-only display of a SQL statement that reflects the current definition of the trigger.
"

Need help in displaying Rows to Columns

Hi,
I am facing problem in displaying Rows to Columns
I am using pivot function:
select *
from
(select vendor_name
from tablea)
pivot
(count(vendor_name)
for vendor_name in ('a,b,'c'));
its working fine showing vendor_name and count
but when i want to display the output as:(How to include the Salalry column in the query?)
Name:{a b c}
Sal Total:(400,600,800}
Any help will be needful for me

Not sure what you mean:
select *
from (select deptno,sal from emp)
pivot(sum(sal) for deptno in (10,20,30))
10 20 30
8750 10875 9400
SQL> SY.

Need help in deleting contacts

Hi All,
I recently bought Sony Ericsson Cedar. However, I am unable to delete contacts from contacts-look up while sending a message. can anyone kindly let me know how to delete contacts from contacts look-up section?
Solved!
Go to Solution.

There are two possibilities here: 1) These numbers are either stored in your SIM contact list, because you had the Autosave to SIM switched on in your Contact settings, or 2) These numbers are actually saved in the phone memory, although you will not find them in your Contacts phone list because they are temporary files: What you need to do is to actually save these numbers first (when they appear in stand-by when you enter a similar number) and then delete them.Hope this helps.

Need help on deleting workflows

Hi experts,
I need to delete workflows that need to be retired. I am veryvery new to workflows. So, what is the Tcode to delete the entire workflow? also, what are the steps that need to be check upon deleting them? i need to delete their custom tables/function modules as well. Can I delete the workflow in one shot? or i need to delete task by task..? thanks in advance

Hi,
Prior to deleting a workflow first Delete/Cancel all the workitems of that workflow. It will help you to avoid unnecessary dump while executing those workitems. Its better to cancel the workitems if it is a productive system.
To delete workflow delete the following items in below mentioned order.
1. Workflow
2. Tasks
3. BO/Classes
Regards,
Anbarasan K
Edited by: Anbarasan K on Jul 7, 2008 1:33 AM

HR_INFOTYPE_OPERATION - Need help w/Deleting infotype records

Hello all,
We have an issue where infotype records got created where the ENDDA is less than the BEGDA (ENDDA = 06/30/2006 and BEGDA = 07/01/2006). We are trying to delete these using HR_INFOTYPE_OPERATION but we are getting message PG-009 (No data stored for 9001 in the selected period) returned in our tests.
BTW, 9001 is one of our customer infotypes.
I know I can remove these records using a direct SQL statement, but I would prefer to remove them more gracefully if possible. Is there a way around this error? I actually think function module HR_READ_INFOTYPE is raising the error.
Any suggestions would be greatly appreciated.
Thanks,
Al

You can check report RHRHDC00, I think it can help you with custom infotype too.
Otherwise you might need to delete the records forcefully using DELETE statement, which is not suggested since all the standard FM consider BEGDA and ENDDA and in your case they will always return blank.
You can also check FM -
HR_ECM_DELETE_INFOTYPE
Regards,
Amit
Reward all helpful replies.

Need help with inserting rows in ResultSet and JTable

hello Guru!
i have inserted a row in my result set and i want that my table shows this row promptly after i have inserted it in my result set...
but when i use following code for my resultset:
rs.moveToInsertRow();
rs.updateInt(1,nr);
rs.updateString(2, name);
rs.insertRow();
Record are inserted in resultset and database but not shown in my JTable??
Anyone a Clue to without reexecuting the query how can i display inserted row in JTable
http://download-west.oracle.com/docs/cd/A87860_01/doc/java.817/a83724/resltse7.h
I have refrered the following links but still clue less help Guruuuuuuu
i m really in trobble??????

i am just near by the Solution using the Database Metadata
by couldn't get the ideaaaa
==================================================
http://download-west.oracle.com/docs/cd/A87860_01/doc/java.817/a83724/resltse7.htm
Seeing Database Changes Made Internally and Externally
This section discusses the ability of a result set to see the following:
its own changes (DELETE, UPDATE, or INSERT operations within the result set), referred to as internal changes
changes made from elsewhere (either from your own transaction outside the result set, or from other committed transactions), referred to as external changes
Near the end of the section is a summary table.
Note:
External changes are referred to as "other's changes" in the Sun Microsystems JDBC 2.0 specification.
Seeing Internal Changes
The ability of an updatable result set to see its own changes depends on both the result set type and the kind of change (UPDATE, DELETE, or INSERT). This is discussed at various points throughout the "Updating Result Sets" section beginning on , and is summarized as follows:
Internal DELETE operations are visible for scrollable result sets (scroll-sensitive or scroll-insensitive), but are not visible for forward-only result sets.
After you delete a row in a scrollable result set, the preceding row becomes the new current row, and subsequent row numbers are updated accordingly.
Internal UPDATE operations are always visible, regardless of the result set type (forward-only, scroll-sensitive, or scroll-insensitive).
Internal INSERT operations are never visible, regardless of the result set type (neither forward-only, scroll-sensitive, nor scroll-insensitive).
An internal change being "visible" essentially means that a subsequent getXXX() call will see the data changed by a preceding updateXXX() call on the same data item.
JDBC 2.0 DatabaseMetaData objects include the following methods to verify this. Each takes a result set type as input (ResultSet.TYPE_FORWARD_ONLY, ResultSet.TYPE_SCROLL_SENSITIVE, or ResultSet.TYPE_SCROLL_INSENSITIVE).
boolean ownDeletesAreVisible(int) throws SQLException
boolean ownUpdatesAreVisible(int) throws SQLException
boolean ownInsertsAreVisible(int) throws SQLException
Note:
When you make an internal change that causes a trigger to execute, the trigger changes are effectively external changes. However, if the trigger affects data in the row you are updating, you will see those changes for any scrollable/updatable result set, because an implicit row refetch occurs after the update.
Seeing External Changes
Only a scroll-sensitive result set can see external changes to the underlying database, and it can only see the changes from external UPDATE operations. Changes from external DELETE or INSERT operations are never visible.
Note:
Any discussion of seeing changes from outside the enclosing transaction presumes the transaction itself has an isolation level setting that allows the changes to be visible.
For implementation details of scroll-sensitive result sets, including exactly how and how soon external updates become visible, see "Oracle Implementation of Scroll-Sensitive Result Sets".
JDBC 2.0 DatabaseMetaData objects include the following methods to verify this. Each takes a result set type as input (ResultSet.TYPE_FORWARD_ONLY, ResultSet.TYPE_SCROLL_SENSITIVE, or ResultSet.TYPE_SCROLL_INSENSITIVE).
boolean othersDeletesAreVisible(int) throws SQLException
boolean othersUpdatesAreVisible(int) throws SQLException
boolean othersInsertsAreVisible(int) throws SQLException
Note:
Explicit use of the refreshRow() method, described in "Refetching Rows", is distinct from this discussion of visibility. For example, even though external updates are "invisible" to a scroll-insensitive result set, you can explicitly refetch rows in a scroll-insensitive/updatable result set and retrieve external changes that have been made. "Visibility" refers only to the fact that the scroll-insensitive/updatable result set would not see such changes automatically and implicitly.
Visibility versus Detection of External Changes
Regarding changes made to the underlying database by external sources, there are two similar but distinct concepts with respect to visibility of the changes from your local result set:
visibility of changes
detection of changes
A change being "visible" means that when you look at a row in the result set, you can see new data values from changes made by external sources to the corresponding row in the database.
A change being "detected", however, means that the result set is aware that this is a new value since the result set was first populated.
With Oracle8i release 8.1.6 and higher, even when an Oracle result set sees new data (as with an external UPDATE in a scroll-sensitive result set), it has no awareness that this data has changed since the result set was populated. Such changes are not "detected".
JDBC 2.0 DatabaseMetaData objects include the following methods to verify this. Each takes a result set type as input (ResultSet.TYPE_FORWARD_ONLY, ResultSet.TYPE_SCROLL_SENSITIVE, or ResultSet.TYPE_SCROLL_INSENSITIVE).
boolean deletesAreDetected(int) throws SQLException
boolean updatesAreDetected(int) throws SQLException
boolean insertsAreDetected(int) throws SQLException
It follows, then, that result set methods specified by JDBC 2.0 to detect changes--rowDeleted(), rowUpdated(), and rowInserted()--will always return false with the 8.1.6 Oracle JDBC drivers. There is no use in calling them.
Summary of Visibility of Internal and External Changes
Table 12-1 summarizes the discussion in the preceding sections regarding whether a result set object in the Oracle JDBC implementation can see changes made internally through the result set itself, and changes made externally to the underlying database from elsewhere in your transaction or from other committed transactions.
Table 12-1 Visibility of Internal and External Changes for Oracle JDBC
Result Set Type Can See Internal DELETE? Can See Internal UPDATE? Can See Internal INSERT? Can See External DELETE? Can See External UPDATE? Can See External INSERT?
forward-only
no
yes
no
no
no
no
scroll-sensitive
yes
yes
no
no
yes
no
scroll-insensitive
yes
yes
no
no
no
no
For implementation details of scroll-sensitive result sets, including exactly how and how soon external updates become visible, see "Oracle Implementation of Scroll-Sensitive Result Sets".
Notes:
Remember that explicit use of the refreshRow() method, described in "Refetching Rows", is distinct from the concept of "visibility" of external changes. This is discussed in "Seeing External Changes".
Remember that even when external changes are "visible", as with UPDATE operations underlying a scroll-sensitive result set, they are not "detected". The result set rowDeleted(), rowUpdated(), and rowInserted() methods always return false. This is further discussed in "Visibility versus Detection of External Changes".
Oracle Implementation of Scroll-Sensitive Result Sets
The Oracle implementation of scroll-sensitive result sets involves the concept of a window, with a window size that is based on the fetch size. The window size affects how often rows are updated in the result set.
Once you establish a current row by moving to a specified row (as described in "Positioning in a Scrollable Result Set"), the window consists of the N rows in the result set starting with that row, where N is the fetch size being used by the result set (see "Fetch Size"). Note that there is no current row, and therefore no window, when a result set is first created. The default position is before the first row, which is not a valid current row.
As you move from row to row, the window remains unchanged as long as the current row stays within that window. However, once you move to a new current row outside the window, you redefine the window to be the N rows starting with the new current row.
Whenever the window is redefined, the N rows in the database corresponding to the rows in the new window are automatically refetched through an implicit call to the refreshRow() method (described in "Refetching Rows"), thereby updating the data throughout the new window.
So external updates are not instantaneously visible in a scroll-sensitive result set; they are only visible after the automatic refetches just described.
For a sample application that demonstrates the functionality of a scroll-sensitive result set, see "Scroll-Sensitive Result Set--ResultSet5.java".
Note:
Because this kind of refetching is not a highly efficient or optimized methodology, there are significant performance concerns. Consider carefully before using scroll-sensitive result sets as currently implemented. There is also a significant tradeoff between sensitivity and performance. The most sensitive result set is one with a fetch size of 1, which would result in the new current row being refetched every time you move between rows. However, this would have a significant impact on the performance of your application.
how can i implement this using
JDBC 2.0 DatabaseMetaData objects include the following methods to verify this. Each takes a result set type as input (ResultSet.TYPE_FORWARD_ONLY, ResultSet.TYPE_SCROLL_SENSITIVE, or ResultSet.TYPE_SCROLL_INSENSITIVE).
boolean deletesAreDetected(int) throws SQLException
boolean updatesAreDetected(int) throws SQLException
boolean insertsAreDetected(int) throws SQLException

Need help to delete videos on macbook pro. dragging to trash is not working

Can't seem to delete old videos i want to take off the computer.. Not working to drag them to trash, or to click on trash… Any ideas???
thanks
kaya

You need to select one or more photos you wish to delete then CTRL- or RIGHT-click and select Trash from the context menu. To get rid of the photos permanently after you finish select the Trash entry in iPhoto's sidebar, CTRL- or RIGHT-click and select Empty.

Need help in deleting songs from iPod

I'm trying to delete songs from iPod (not library), but song and podcast list is grayed out. I cannot select them to delete them. This seems like a very simple thing to do. I have the latest iTunes and iPod software loaded and have tried the online help, the 5 Rs and restart. I'm feeling really stupid here!!!!!
eMac Mac OS X (10.3.9)

Set the iPod to manage content manually; you should then be able to select and delete the items listed as being on the iPod.
(16556)

Need Help Regarding Deletion(Text area)

Hi everyone,
Can anyone tell me how to use delete() method to delete a text written in the text area? I have it as a menu item, i have added an action listener for that and a shortcut key for the same on backspace. But i am not able to get it worked. Thanks for writing back.
Cheers

It's hard to impossible to see exactly what you are doing or what you are doing wrong based on what you tell us.
I think that at this point you'll have to post some code. I recommend that you create and post the smallest program possible that is compilable, runnable, demonstrates your problem, and has no extraneous code not related to the problem, an [SSCCE.|http://sscce.org] Please see the link for details on how to create one of these because trust me, if your SSCCE is compliant with the specs, you'll likely get a very helpful answer from someone here quickly.

Need help on deleting row

Similar Messages

Maybe you are looking for