Need help on extraction of MDM repository data

I need to take an extract of records from the Customer repository. Total count of the records will be around 25,000 when the filter criteria is applied. As per the requirement I need to select some fields from main table, some from flat look up and few from the qualified look up tables.
What are the possible ways to take the extract?
I am using SAP MDM 5.5. I tried using the export option in Data Manager, but the qualified look up field values did not come properly in the file. The whole qualified look up table values came under a single column. So that exported file is not of much use for my requirement.
Please suggest me some ways.

Hi Priyanka,
Suggest you to use SAP MDM Syndicator for extracting data. Please refer the Syndicator document for all the details.
Thanks,
Shamir

Similar Messages

  • Need help with representing 2 bits of data in a column

    I Need help representing only 2 bits of data in a column in order to save space.
    Is that possible?

    CommitMan wrote:
    I Need help representing only 2 bits of data in a column in order to save space.
    Is that possible?Yes - using Assembler....
    If you need to count bits to save space, then you must be on 70's, or early 80's, hardware. So using Assembler should not be a problem. Let me guess.. a 8051 microcontroller from the 1980?
    Here's what the 8051 code and memory optimisation manual says:
    >
    The simplest and best way to get dramatic improvements
    in efficiency is to look for all variables that will have only
    binary values (0 and not 0), and define them as type 'bit‘:
    bit myVar;With bit variables, the full set of 8051 bit-level assembler
    instructions can be used to generate very fast and
    compact code. For example, the following C code:
    myVar = ~myVar;
    if (!myVar)
    }Generates only two lines of assembler:
    B200    CPL myVar
    200006  JB myvar,?C0002This example uses only 5 flash bytes and 8 CPU cycles.
    When you use bit variables, you can implement a
    nontrivial line of C code with just one assembler
    instruction.
    >
    <i>PS. Yes, the above is really from a manual for a real 80s microcontroller. And yes, I'm poking fun at your question as saving bits were a problem in the 80s and prior. It should not be a problem in the 21st century information system and database.</i>

  • Help required for importing a repository data file in the B2B console

    I am trying to import a repository data file with the delivery-channel element
    and attributes as below.
    <delivery-channel
    name="GM_DC"
    syncReplyMode="none"
    nonrepudiation-of-origin="false"
    nonrepudiation-of-receipt="false"
    secure-transport="true"
    confidentiality="false"
    routing-proxy="false"
    document-exchange-name="GM_DE"
    transport-name="GM"/>
    I have modified the WLC.dtd present in the lib\dtd subdirectory of the WebLogic
    Integration installation directory to add the syncReplyMode attribute.
    When i import the xml file,i get the following error
    com.bea.b2b.B2BException: ERROR: Invalid document, file 'C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\B2B_COV_Export.xml'.
         at com.bea.b2b.bulkloader.BulkLoader.processDataFile(Unknown Source)
         at com.bea.b2b.bulkloader.BulkLoader.processDataFile(Unknown Source)
         at com.bea.b2b.bulkloader.BulkLoader.load(Unknown Source)
    Please advise,
    Aruna

    Here are a few Links to a helpful Knowledge Base article and a White Paper that should help you out: http://digital.ni.com/public.nsf/allkb/BBCAD1AB08F1B6BB8625741F0082C2AF and http://www.ni.com/white-paper/10435/en/ . The methods for File IO in Real Time are the same for all of the Real Time Targets. The White Paper has best practices for the File IO and goes over how to do it. 
    Alex D
    Applications Engineer
    National Instruments

  • I need help to convert a string to date and time

    Good aft,
    1.How can i get a date from the user input thro' Frames?
    2.How to parse it to the date object(I need to include java.util.Date but for the database i need to include java.sql.*,if i do so, i have error as
    found:java.util.Date
    Required:java.sql.Date)
    3.How to insert into the database
    The same i need help to insert time into database?
    I need solution and explanation...
    Reply me immediately...
    If u send me the code, its better to me.

    Hello,
    The best way is to use the HEX to decimal coversion VI in the string pallette. Then, write this decimal directly to your chart. If you are doing it a point at a time put it into a while loop.
    Doug

  • Need help using LabVIEW 7.1 and data socket to transfer images

    I need help transferring images across a company network using: LV 7.1, IMAQ 3.0 and a PCI 1407 image aquisition card. I am trying to use datasocket to transfer video image across a company network. I have attached sample vis. Thanks in advance for your help.
    I. Cyr
    Attachments:
    Vibration Chamber Vision_Cyr.llb ‏129 KB

    Hello –
    Something that you need to consider is the fact that when you are sending an image over Data Socket, it is not really the image what is being transferred but a pointer to the image. Please take a look into this Knowledgebase.
    Also, you might find this Example Program useful.
    Hope this helps.
    S Vences
    Applications Engineer
    National Instruments

  • Need help with extracting sales data

    Hi all,
    We want to get a list of net sales (invoice minus credit notes) per customer by Item Group. This would look like:
    Customer Code | Customer Name | Item GroupA | Item GroupB | Item GroupC etc..
    The data appears to be in the Sales Analysis Report if we select the Items tab and use "Group Display" and "Total By Customer". However the format of that is different to the above.
    Can anyone suggest either:
    - how to do the same thing via query
    - how to best convert the standard output into the above format (perhaps some Excel trickery?)
    Thanks in advance,
    Raj

    Hi Raj,
    Try this query. You change the tables as per your needs.
    select OCRD.CardName ,
    case when OITB.ItmsGrpCod  = 103 then SUM(doctotal) else 0 end as 'Amplifier (AMP)',
    CASE when OITB.ItmsGrpCod  = 104 then SUM(doctotal) else 0 end as 'Audio Tech (AUT)'
    from ocrd inner join oinv on ocrd.cardcode = oinv.cardcode 
    inner join nnm1 on oinv.series = nnm1.series 
    inner join inv1 on oinv.docentry = inv1.docentry 
    inner join OITM on OITM.ItemCode = INV1.ItemCode
    inner join OITB  on OITM.ItmsGrpCod = OITB.ItmsGrpCod
    where oinv.docdate >= CONVERT(DATETIME, '4/1/2011', 102) 
    and oinv.docdate <= convert(datetime,'3/31/2012',102) 
    and ocrd.cardcode = 'CA0163'
    group by OCRD.CardName , OITB.ItmsGrpCod 
    Union 
    select OCRD.CardName ,
    case when OITB.ItmsGrpCod  = 103 then SUM(-doctotal) else 0 end as 'Amplifier (AMP)',
    CASE when OITB.ItmsGrpCod  = 104 then SUM(-doctotal) else 0 end as 'Audio Tech (AUT)'
    from ocrd inner join orin on ocrd.cardcode = orin.cardcode 
    inner join nnm1 on orin.series = nnm1.series 
    inner join rin1 on orin.docentry = rin1.docentry 
    inner join OITM on OITM.ItemCode = RIN1.ItemCode
    inner join OITB  on OITM.ItmsGrpCod = OITB.ItmsGrpCod
    where orin.docdate >= CONVERT(DATETIME, '4/1/2011', 102) 
    and orin.docdate <= convert(datetime,'3/31/2012',102) 
    and ocrd.cardcode = 'CA0163'
    group by ocrd.CardName , oitb.ItmsGrpCod
    order by 1,2
    Thanks
    Malhaar

  • Need help in extracting value from an xml tag.

    Hi ALL,
    Good Morning to all, i have problem in fetching a value from a xml tag. I have created a xml schema based on the schema i have created a xmltype table and inserted a value to the table. When i am trying to fetch a value from a particular tag i am unable to do so.. Kindly help me to solve this. Here by i am posting all the workings i have done...
    I am using the following client:
    SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jan 31 11:44:59 2011
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    ////////////////////////////////// XML Schema ///////////////////////
    begin
    dbms_xmlschema.registerSchema(
    'http://www.oradev.com/chipsxml.xsd',
    '<schema xmlns="http://www.w3.org/2001/XMLSchema"
    targetNamespace="http://www.oradev.com/chipsxml.xsd"
    xmlns:samp="http://www.oradev.com/chipsxml.xsd"
    version="1.0">
    <element name="Field1">
    <complexType>
    <sequence>
         <element name="UTI">
              <complexType>
              <sequence>
              <element name = "U01" type = "string"/>
              <element name = "U02" type = "string"/>
              <element name = "U03" type = "string"/>
              <element name = "U03a" type = "string"/>
              <element name = "U03b" type = "string"/>          
              <element name = "U03c" type = "string"/>          
              <element name = "U04" type = "string"/>                    
              <element name = "U05" type = "string"/>                    
              </sequence>
              </complexType>
         </element>
    </sequence>
    </complexType>
    </element>
    </schema>',
    TRUE, TRUE, FALSE, FALSE);
    end;
    ////////////////////////// Table which has multiple Column //////////////////////////
    CREATE TABLE chipsxmltable1 (
    id number, XMLDATA XmlType)
    XMLTYPE XMLDATA STORE AS OBJECT RELATIONAL
    XMLSCHEMA "http://www.oradev.com/chipsxml.xsd"
    ELEMENT "Field1";
    ///////////////////////////////// Insert Query in chipsxmltable //////////////////////////
    INSERT INTO chipsxmltable VALUES(
    xmltype.createxml('<?xml version="1.0"?>
    <samp:Field1 xmlns:samp="http://www.oradev.com/chipsxml.xsd" >
    <UTI>
    <U01>No</U01>
    <U02>Y</U02>
    <U03>Y</U03>
    <U03a>Y</U03a>
    <U03b>Y</U03b>
    <U03c>Y</U03c>     
    <U04>Y</U04>
    <U05>Y</U05>          
    </UTI>
    </samp:Field1>'));
    To show the data as a field with structure:
    1. Query:
    Select * from chipsxmltable1;
    Output:
    ID XMLDATA
    1 <?xml version="1.0"?>
    <samp:Field1 xmlns:samp="http://www.oradev.com/chipsxml.xsd">
    <UTI>
    <U01>No</U01>
    <U02>No</U02>
    <U03>Y</U03>
    <U03a>Y</U03a>
    <U03b>Y</U03b>
    <U03c>Y</U03c>
    <U04>Y</U04>
    <U05>Y</U05>
    </UTI>
    </samp:Field1>
    2. Query: (Both the query displays the same Output)
         SELECT X.xmldata.getClobVal() "XMLDATA" FROM chipsxmltable1 X;
         select extract(XMLDATA, '/Field1').getstringval() "XMLDATA" from chipsxmltable1 x;
    Output:
    XMLDATA
    <?xml version="1.0"?>
    <samp:Field1 xmlns:samp="http://www.oradev.com/chipsxml.xsd">
    <UTI>
    <U01>No</U01>
    <U02>No</U02>
    <U03>Y</U03>
    <U03a>Y</U03a>
    <U03b>Y</U03b>
    <U03c>Y</U03c>
    <U04>Y</U04>
    <U05>Y</U05>
    </UTI>
    </samp:Field1>
    To show the data as a single string without structure using "getstringval()":
    3. Query
         select extract(XMLDATA, '//text()').getstringval() "CHIPS - XML" from chipsxmltable1 x;
    OUtput:
    CHIPS - XML
    NoNoYYYYYY
    To show the data as a single string without structure using "getclobval()":
    4.Query
         select extract(XMLDATA, '//text()').getClobVal() "CHIPS - XML" from chipsxmltable1 x;
    Output:
    CHIPS - XML
    NoNoYYYYYY
    To show the data in a particular tag with/Without structure (Which is not working) using "EXTRACT" function:
    6.Query:
         select extract(XMLDATA, '/Field1/text()').getstringval() "XMLDATA" from chipsxmltable1 x;
         select extract(XMLDATA, '/Field1/UTI').getstringval() "XMLDATA" from chipsxmltable1 x;
         select extract(XMLDATA, '/Field1/UTI/U01').getstringval() "XMLDATA" from chipsxmltable1 x;
         select extract(XMLDATA, '/Field1/UTI/U01/text()').getstringval() "XMLDATA" from chipsxmltable1 x;
    Output:
    CHIPS - XML
    The above queries are not fetching the value.
    To show the data in a particular tag with/Without structure (Which is not working) using "EXTRACTVALUE" function:
    7. Query:
         select extractValue(XMLDATA, '/Field1/UTI') "XMLDATA" from chipsxmltable1 x;
         select extractValue(XMLDATA, '/Field1/UTI/U01') "XMLDATA" from chipsxmltable1 x;
    Output:
    X
    The above queries are not fetching the value.
    My question is:
    How to fetch values from xml tag when the value are inserted through xml schema?
    Apologies if the description is not clear. Kindly let me know if further details are needed. Many thanks for your help.
    Very best regards,
    Godwin Jebakumar C.V.

    Hi,
    You need to declare the namespace of each element used in the XPath expression, like this :
    SQL> select extractvalue( XMLDATA
      2                     , '/samp:Field1/UTI/U01'
      3                     , 'xmlns:samp="http://www.oradev.com/chipsxml.xsd"' ) "XMLDATA"
      4  from chipsxmltable1 x
      5  ;
    XMLDATA
    No
    SQL> select extract( XMLDATA
      2                , '/samp:Field1/UTI'
      3                , 'xmlns:samp="http://www.oradev.com/chipsxml.xsd"'
      4                ).getstringval() "XMLDATA"
      5  from chipsxmltable1 x
      6  ;
    XMLDATA
    <UTI>
      <U01>No</U01>
      <U02>Y</U02>
      <U03>Y</U03>
      <U03a>Y</U03a>
      <U03b>Y</U03b>
      <U03c>Y</U03c>
      <U04>Y</U04>
      <U05>Y</U05>
    </UTI>
    Please see EXTRACT and EXTRACTVALUE documentation :
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/functions051.htm#i1006712
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/functions052.htm#SQLRF06173
    BTW, "XMLDATA" is a pseudo-column used by Oracle. I don't know if it'll ever cause any conflict but maybe you should rename your column.
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/pseudocolumns010.htm#SQLRF00256
    Regards.

  • Need help with query that can look data back please help.

    hi guys i have a table like such
    CREATE TABLE "FGL"
        "FGL_GRNT_CODE" VARCHAR2(60),
        "FGL_FUND_CODE" VARCHAR2(60),
        "FGL_ACCT_CODE" VARCHAR2(60),
        "FGL_ORGN_CODE" VARCHAR2(60),
        "FGL_PROG_CODE" VARCHAR2(60),
        "FGL_GRNT_YEAR" VARCHAR2(60),
        "FGL_PERIOD"    VARCHAR2(60),
        "FGL_BUDGET"    VARCHAR2(60)
      )and i have a data like such
    Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','11','1','400');
    Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','10','1','100');
    Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','1','0');
    Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','14','200');
    Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','10','14','100');
    Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','10','2','100');
    Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7470','4730','02','10','2','200');I bascially need to get the total of the budget column. however its not as simple as it sound(well atleast not for me.) the totals carry over to the new period. youll noticed the you have a period column. basically what im saying is that
    fgl_grant_year 10 period 1 = for account 7600 its $100 and $100 for period 2 you see 100 dollars again this is not to be added this is the carried over balance. which remains $100.
    so im trying to write a query that basically does the following.
    im given a period for the sake of this example lets say period 1 i get nothing else. I have to find the greates grant year grab the amount for period 14(which is the total from the previous year) and add it to the amount of the current period. in this case period 1 grnt_year 11
    so the expected outcome should be $700
    240055     240055     7240     4730     02     10     14     200
    240055     240055     7600     4730     02     10     14     100
    240055     240055     7600     4730     02     11     1     400keep in mind that im not given a year just a period.
    any help that you guys can offer would be immensely appreciated. I have been trying to get this to work for over 3 days now.
    finally broke down and put together this post
    Edited by: mlov83 on Sep 14, 2011 8:48 PM

    Frank
    wondering if you can help me modify this sql statement that you provided me with .
    table values have been modified a bit.
    Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','11','00','400');
    Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','1','100');
    Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','1','0');
    Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','11','1','400');
    Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('360055','360055','7200','4730','02','10','1','400');
    Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('360055','360055','7600','4730','02','10','1','400');
    Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','14','200');
    Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','10','14','100');
    Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','14','200');
    Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','2','100');
    Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','11','2','600');i need to take one more thing into consideration. if the greatest year has a value on period 00 i need to ignore the period 14 and the current period total would be
    the current period +(current period - greatest year 00)
    hope that makes sense so in other words with the new data above. if i was querying period two of grant year 11. i would end up with $800
    because the greatest year is 11 it contains a period 0 with amount of $400 so my total should be
    period 2 amount $ 600
    period 0 amount $ 400 - period 2 amount of $600 = 200
    600+200 = $800
    if i query period 1 of grant 360055 i would just end up with 800 of grnt year 10.
    i have tried to modify that query you supplied to me with no luck. I have tried for several day but im embarrased to say i just can get it to do what im trying to do .
    can you please help me out.
    Miguel

  • NEED HELP IN USING ALL_TAB_COLUMNS FOR RETRIEVING DATA???

    A table say T1 contains column like Emp_id,Code.
    and there are several Code like C1,C2,C3.
    Another table say T2 contains column like
    Emp_id,C1,C2,C3.Here the value of the code field of the
    T1 table is now column of the T2 table.And the amount of
    each code of T1 table is equal to column value of T2
    table.
    Now I want to retrieve data from T2 table like
    C1 200
    C2 300
    C3 140
    I cannot retrieve data like this using all_tab_columns.
    I can only getting the column_name but cannot its value.
    PLEASE HELP ME...
    Edited by: user630863 on Apr 8, 2009 11:37 AM

    emp_id | code
    001 | C1
    001 | C2
    005 | C3
    005 | C1
    002 | C2
    002 | C3
    Table T1
    emp_id | C1 | C2 | C3
    001 | 10 | 15 |
    002 | | 7 | 12
    005 | 45 | | 94
    Table T2
    I have written a query
    select column_name from all_tab_columns a,T1 b
    where a.column_name=b.code
    and table_name='T2'
    OUTPUT:
    C1
    C2
    C3
    But I Need data for each employee like
    001 C1 10
    001 C2 15
    002 C2 7
    002 C3 12
    005 C1 45
    005 C3 94
    Edited by: user630863 on Apr 8, 2009 1:28 PM

  • Need Help To Extract Logo from Flash File .swf

    I have an attached Flash file that is in
    .swf format. There is a N64 logo within this file that I'm
    trying to extract as a
    .png with a transparent background. I've been able to open
    it in a program called
    Flash Decompiler Trillix and in the sub-menus it has the
    logo listed as a frame.
    This is about as far as I have gotten and I'm stuck. Perhaps
    someone else knows how to do this a little easier. I just need to
    find a way to extra the logo that already has a transparent
    background and save it in
    .png format.
    Any help here would be hot." ;)
    Logo Flash
    File .swf

    Hello,
    I ran into a similar problem a few months ago. I have the
    Sothink Flash Decompiler and what I did was turn the SWF back into
    a FLA. I then opened it in Flash and then exported what I wanted as
    a PNG image.
    Decompilers can extract the actual image whether it be jpeg,
    gif, png, etc. But when it's listed as a frame(as you mentioned
    above) then the method above is probably the best way to get it.
    Good luck

  • I need help figuring out how to Link Data from one table in Sharepoint to another table in Sharepoint and make it dynamic

    Hi Everyone,
    I am working on a project that uses SharePoint 2010 for repository and we have multiple tables that we are using.
    One table is a list of the various projects we are working on (workstreams)
    The other is a table with various notes and such, to include meeting notes for the various projects.
    Currently we are just copying the shortcut from the meeting notes table and adding it in as a link in the workstreams status table.
    I need to find out if there is some sort of way to make this process dynamic so that when a new note is added for, lets say workstream #1 in the notes table, it will automatically propogate into the notes link section for workstream #1.
    Is this even possible??
    And if so how would I do it
    I haven't done much with modifying SharePoint in several years, and would Truly appreciate any and all help with this.
    Thanks in advance
    IKE

    Hi IKE,
    According to your description, my understanding is that you want to create a link in the workstreams list linked to the associated item of the notes list.
    Assuming the workstreams list has  Title column and another column called “Note” used to linked to notes list, and the notes list has Title column and another column used to store note.
    Then you can create a workflow on the notes list with SharePoint Designer 2010, and in the workflow, using “Update ListItem” action. And in the workflow Start Options, select “Start workflow automatically when an item is created”.
    For the workflow action, you can set as the screenshot:
    For the string in the String Builder, you need to open an item of notes list, then copy the URL of the display form and paste here, the URL will look something like this:
    http://sp/Lists/notes/DispForm.aspx?ID=1&Source=http%3A%2F%2Fsp%2FLists%2Fnotes%2FAllItems%2Easpx&ContentTypeId=0x0100300025278693CE49A5E3A394B23AD9E1&IsDlg=1
    Now, you need to replace the ID of the item using [%Current Item:ID%], for example in the above link, delete the number 1 and add [%Current Item:ID%].
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • Need help on How to delete duplicate data

    Hi All
    I need your help in finding the best way to delete duplicate data from a table.
    Table is like
    create table table1 (col1 varchar2(10), col2 varchar2(20), col3 varchar2(30));
    Insert into table1 ('ABC', 'DEF','FGH');
    Insert into table1 ('ABC', 'DEF','FGH');
    Insert into table1 ('ABC', 'DEF','FGH');
    Insert into table1 ('ABC', 'DEF','FGH');
    Now I want a sql statement which will delete the duplicate rows and leaves 1 row of that data in the table. ie.in the above example delete 3 rows of duplicate data and leave a row of that data in the table. My oracle version is 8i.
    Appreciate your help in advance.

    Either of these will work, the best approach will depend on how big the table is, and how many duplicates there are.
    SQL> SELECT * FROM table1;
    COL1       COL2                 COL3
    ABC        DEF                  FGH
    ABC        DEF                  FGH
    ABC        DEF                  FGH
    ABC        DEF                  FGH
    ABC        DEF                  IJK
    BCD        EFG                  HIJ
    BCD        EFG                  HIJ
    SQL> DELETE FROM table1 o
      2  WHERE rowid <> (SELECT MAX(rowid)
      3                  FROM table1 i
      4                  WHERE o.col1 = i.col1 and
      5                        o.col2 = i.col2 and
      6                        o.col3 = i.col3);
    4 rows deleted.
    SQL> SELECT * FROM table1;
    COL1       COL2                 COL3
    ABC        DEF                  FGH
    ABC        DEF                  IJK
    BCD        EFG                  HIJ
    SQL> ROLLBACK;
    Rollback complete.
    SQL> CREATE TABLE table1_tmp AS
      2  SELECT DISTINCT * FROM table1;
    Table created.
    SQL> TRUNCATE TABLE table1;
    Table truncated.
    SQL> INSERT INTO table1
      2  SELECT * FROM table1_tmp;
    3 rows created.
    SQL> SELECT * FROM table1;
    COL1       COL2                 COL3
    ABC        DEF                  FGH
    ABC        DEF                  IJK
    BCD        EFG                  HIJThere are other approaches as well (e.g. see the EXCEPTIONS INTO clause of the ALTER TABLE command), but these are the most straightforward.
    HTH
    John

  • Need help regarding the maximum limit for data type

    Hi,
    this is Sravan. for my application am inserting the bulk data in XML format into a column of Database table.
    the sample inserted XML data will be in format... like
    '<ACC count = "10">
    <Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
    <Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
    <Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
    <Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
    <Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
    <Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
    <Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
    <Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
    <Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
    <Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
    </ACC>'
    this data in XML can have more than 1000 accounts.
    now, i need to take a Parameter value from XML node and write into a file. for this i have written a procedure by looping the Nodes from XML data and building Dynamic Query like..
    if nvl(v_int, 0) > 0 then
    v_sql := '';
         for v_count in 1..v_int
         loop
         if v_sql is null then
              v_sql := 'select extractvalue(empdetails, ''/ACC/Acc' || v_count ||'/@ac_no'')||extractvalue(empdetails, ''/ACC/Acc' || v_count
    ||'/@cn_nr'')||extractvalue(empdetails, ''/ACC/Acc' || v_count ||'/@eflag'') string from sample1';
         elsif v_sql is not null then
                   v_sql := v_sql || ' union all select extractvalue(empdetails, ''/ACC/Acc' || v_count ||'/@ac_no'')||extractvalue(empdetails, ''/ACC/Acc' || v_count
    ||'/@cn_nr'')||extractvalue(empdetails, ''/ACC/Acc' || v_count ||'/@eflag'') string from sample1';
              end if;
         end loop;
    end if;
    i will get this variable "v_int" from <ACC count = "10"> ACC count Attribute, here 10 is the value for v_int variable but in real time the variable value can be more than 1000.
    at the time of Building Dynamic Query I make using the Variable v_SQL which is of Data Type "Long",
    this variable stores dynamic query which is build at the time of executing procedure but this v_sql Variable is throughing Exception that ....
    "numeric or value error Character String Buffer is Too Small"... but Long Data type will store upto 2GB..
    this variable cant able to hold much data which is dynamically build.
    will you please help me to resolve this issue Or will u suggest me another method to pick the data from XML column.
    thanks,
    sravan.

    user11176969 wrote:
    i changed the code, now its working fine.
    direct assigning the dynamic query to a Clob variable raised error.
    for dynamic query building i used another variable and assigned this variable value to actual query variable.Nice!

  • I need help in "HOW TO EXTEND THE DATA TYPE SYSTEM"......

    Hi All,
    I need to add new data type like SDO_GEOMETRY in spatial Oracle.
    I don't mean the User-Defined Datatype but new datatype embed in the database.
    I read the Data Cartridge Developer's Guide but it has info how to use more efficiently UDT through indexes.
    Anybody used the “Type System” under Databases and Extensibility Services?
    It might be written in C++ or Java but I do not know how.
    Any hints and help will be appreciated.
    Thanks,

    > In Figure 1-1 Oracle Services, there is a "Type System" as Oracle Services.
    The "Type System" is merely a compartmentalising the data type handling and implementation code/modules in Oracle.
    This covers all types. Oracle native types, user defined types (UDTs), etc.
    Saying that you want to create a new type in the "Type System" is basically saying you want to use the CREATE TYPE SQL command in Oracle.
    > So, I want new_type1 and new_type2 behave like other built-in types, just the way
    SDO_GEOMETRY works in Oracle Spatial Cartridge.
    Not familiar with the SDO_GEOMETRY. Why do you mention this type specifically? What do you want to do similar?
    > I have already done it with user-defined types. Now I need to do this way so that I can
    compare and contrast in terms of speed, space...etc for part of my research.
    Hmm.. I'm not sure what you are trying to compare ito of a UDT and Data Cartridge extensions. It is not one or the other. What research is this if I may ask?
    Simplistically you extend the Type System with a new UDT/ADT. And there you have a new type data can be used in the SQL Engine and the PL/SQL engine. The OCI (Oracle Call Interface) supports such types via the OCI object API calls - which means this new type can also be used from Oracle clients written in Delphi, C++, Java, etc.
    That new type can be a complex type. This type may need specific management code (memory management, context management, internationalisation, etc). To support this you can extend the UDT/ADT further by developing Cartridge Basic Service interfaces for the type - designing and writing management code to, for example, support specific internationalisation requirements when dealing with multibyte character sets.
    You can also extend the UDT/ADT to be custom managed ito indexing, determining query optimisation, computing costs of custom methods/functions/operators on this custom data type. These extensions are done by developing Data Cartridge interfaces for the type.
    Thus I cannot see what you are trying to compare. It is not one layer/interface versus another. These layers exist for all Oracle types (in the Type System). Oracle not only allows you to add to the top layer by adding/defining a new data type. It also allows you to customise (if needed) the layers below it.

  • Need Help to extract information from Windows Security Event log

    Hi Everyone,
    My challenge is to create a script that queries the Security event log for event id 4624 , logon type 2 and 10, then export the result to file, hopefully tab limited.
    I need the time - date - User Account - Workstation - IP address - Logon Type.
    I have had a go, checking out other advice from other questions, but i'm just not getting what I want.
    Kind regards,
    Andrew

    A good point to start is get-eventlog with where clauses.
    For example:
    get-eventlog -log security  | where {$_.eventID -eq 4624}
    So you want to get the entire security log, and then filter it client side? (Some of these logs can be massive).
    I would recommend Get-WinEvent with -FilterHashTable (Filter on the left) which will filter against the log directly.
    http://blogs.technet.com/b/heyscriptingguy/archive/2011/01/24/use-powershell-cmdlet-to-filter-event-log-for-easy-parsing.aspx
    You might have admin rights issues accessing the security logs.
    You're right - my answer was only a first step to try "get-command *event" and eventually get-help.....

Maybe you are looking for