Need Help on using Forge Config Manager and CAS. Questions listed in the content below

Hi All,
I have an existing Endeca pipeline implementation where we read the data sets (Product Catalog Information) from Oracle database using JDBC adapters. The data set undergoes a series of manipulation until it gets indexed to the Endeca system. We make use of PCI for dimensions and dimension values. However, we now want to extend PCI to also include the Product catalog information. The current implementation also does not make use of CAS adapters to consume the dimensions data in PCI. The next consideration is to implement PCI as close to Out of the Box provisions and standardize it. Therefore we are also considering to implement CAS.
The questions are as below:
1. What are the ideal parameters that should support the use of PCI implementation (Dataset + dimension + precedence Rules + schema information) ? Note: We DO NOT have any product catalog system (like ATG) between database and Endeca.
2. Considering that we do not have any product catalog system to organize and maintain data, how feasible is it to read directly from database through CAS Adapters and process the data ?
3. We also plan to introduce partial update pipeline in future releases. Keeping that in mind should CAS based approach help us to read from a record store at the time of partial updates ?
4.in case we are limiting to a business case of implementing partial updates in the above explained existing design, should a custom CAS approach be a better design ? Custom CAS approach = writing the baseline output data to record store and later referring it at the time of partial updates.
5. Will CAS based approach help to reduce the baseline timings ?
6. What is the best way to export data to record store instance in the above design ? (Record store API / Command line utility / CAS crawl)
Thanks,
Nitin

Hi Neeraj,
You cam use both PI SLD and Solman Local SLD for LMDB synchronization. Now here you make to make sure that correct ranks are assigned to PI and Solman SLD. With the help of multiple sld, you can remove the cause of concern. Local SLD should always be of solman.
For CR content. that you can do for solution manager system in a click.
Divyanshu

Similar Messages

Need help on Using Oracle Acces Manager 11g

Hi
I Need help on Using Oracle Acces Manager Admin console to configure for SSO.
I am new to Identity Management
I have installed OAM 11g and configured for OAM in new weblogic domain
Please help to proceed forward.
Thanks
Swapnil

Hi
Thanks for your reply
I am able to login to the console
I am unable to login the the weblogic server from another machine but abl eto do so from the machine where all this is installed
What i feel is there needs to be some configurataion maybe policy or Agent
IDMDomainAgent is configured and so is the OAM server configured .
Please advice some books or link how to do achieve logging into the weblogic em/console from a remote machine
Thanks in Advance

Need Help on using a Layout Manager

I am working on a screen and need a good Tool to use doing this.
Before I was not using anything, just Textpad to put in my code to draw my screens.
Any suggestions on something to use. I have Visual J++ at work and I can download Forte, so I really don't want to spend any money on JBuilder.
I've heard though that J++ puts extra code in the program (i.e. MFC), is this true and do I have to really worry about it ?
Thank you.

JBuilder is actually one of the best IDE's around, I actually use Oracle JDeveloper 9i which is licensed from JBuilder, if you don't want to spend money get Forte.
J++, Microsoft, nough said really.
But at the end of the day it's down to whatever you are happy with. Try www.zdnet.com to see if there are any IDE's there.

I need help my Ipod touch is locked and I don't have the password?

please help me i have a new Ipod touch but I don't have the password

Connect the iPod to your computer and restore via iTunes. Place the iPod in Recovery mode if necessary to allow a restore.

I can't connect to wifi network and bluetooth on iPhone 4S. Need help. Have already rebooted everything and reset network setting

I can't connect to wifi network and bluetooth on iPhone 4S. Need help. Have already rebooted everything and reset network setting

I have the same problem; tried a phone restore, both restoring data and setting up as new phone with factory settings, reset all settings, re-boot, remove apostrophe, put in fridge, you name it!
I think there's quite a few iphone 4s users with the same problem!
I called Apple they said it's a hardware problem, but it has worked for nearly two years; they say go to the Apple store and they can provide a replacement phone for approx. £150!
I've been into the O2 shop where I bought it and they knew the problem exactly; said they had sent a few phones off for repair and had them back awith a report they cannot fix it because it's a software problem!
An assistant in the shop had the same issues; logic says it's a software problem and hopefully Apple will fix it with a patch but at the moment they seem to be avoiding everyones comments!
If anyone else has any ideas these would be appreciated?

I want to download whatever updates I need for Photoshop CS5. I try using Adobe Application manager and it isnt working.

I want to download whatever updates I need for Photoshop CS5. I am using Adobe Application Manager and there are updates but they arnt going through. It has been awhile since I tried. Dont remember when the last time was. But my Mac Book Pro is in good shape and I am finally getting around to this. didnt expect it not to work. Help?

Hi Richei Creative,
These would be my suggestions:
Create a new user account with administrative rights, log out of your current account and into that one, launch Adobe Application Manager and attempt the Photoshop update again.
Instructions if you need them - http://support.apple.com/kb/PH11468
If this fails, uninstall Photoshop (Applications > Utilities > Adobe Installers) and reinstall Photoshop then from Adobe Application Manager the attempt the Photoshop update again, also from the newly created user account.
Hope these help,
-Dave

Bought a new macbook and want to manually manage music onto my iphone 4s but when i click 'manually manage' and then 'apply' i get the message saying it will erase everything already on there. Need help please!

Bought a new macbook and want to manually manage music onto my iphone 4s (as it is already full of music from old windows laptop) but when i click 'manually manage' and then 'apply' i get the message saying it will erase everything already on there. Need help please!

Before you sync your iPhone make sure that all the music that was synced to your phonereviously has been copied to your iTunes on the new MacBook Pro. Then when you connect your phone you will be able to either sync all music or select only those playlists that you want on the phone.

I need help syncing my contacts between Outlook and iPhone using iTunes. I followed the steps given and ended up with just email addresses showing in my contacts even though I have phone numbers and snail mail in my Outlook Contacts. Using Windows 7

I need help syncing my contacts between Outlook and iPhone using iTunes. I used the knowldge document and set it up to transfer my Outlook contacts to the iphone using itunes.
In contacts on the iphone I only see the email addresses.
Yet in Outlook I have email, snail mail and phone numbers.
I followed the knowledge document from iphone.
I did it once, didn't work so deleted all the contacts from the phone and tried again. Same result. I have a PC using Windows 7 64 bit.

You can't access an Exchange account via ActiveSync with the Address Book and iCal on your Mac.
You can access a MM account with Outlook on your PC at work and keep your MM email account server stored mailboxes synced between your PC at work, your iPhone, and the MM "cloud". Not sure about syncing MM contact info and calendar events with Outlook at the same time with an Exchange account.
This will not provide for syncing your Exchange account contact info and calendar events with the Addresss Book and iCal on your Mac because the accounts are separate.
You can access an Exchange account and a MM account at the same time with the iPhone's mail client, and sync contact info and calendar events over the air with both accounts at the same time. You can view combined contact info or separately for each account, and the same for calendar events.

I need help I can't remember my iTunes Security Questions and have no idea how to change them just used a $20 gift card

I need help I can't remember my iTunes Security Questions and have no idea how to change them just used a $20 gift card

If you have a rescue email address (which is not the same thing as an alternate email address) on your account then you can use that to reset them : http://support.apple.com/kb/HT6170
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will have to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
If your country isn't on that page then try this form and explain and see what they reply with : https://ssl.apple.com/emea/support/itunes/contact.html
When they've been reset (and if you don't already have a rescue email address) you can then use the steps on this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5620
Or, if it's available in your country, you could change to 2-step verification : http://support.apple.com/kb/HT5570

I need help! I have iPad mini and I can't use App Store. It always asking my credit card lnformation to download, but the apps I will download are free. I don't know how it will work again.

I need help!
I have iPad mini and I can't use App Store.
It always asking my credit card lnformation to download, but the apps I will download are free.
I don't know how it will work again.
Help me please!
Thank you.

You need to have a payment method on file. If the apps are free you will not be charged anything. Either enter your credit card information or purchase and enter an iTunes gift card.

Need help in using FM BAPI_MATERIAL_SAVEDATA

Gurus,
I need help in using the FM BAPI_MATERIAL_SAVEDATA. The FM is returning a message that says "The field MARA-MEINS/BAPI_MARA-BASE_UOM(_ISO) is defined as a required field; it does not contain an entry".
I have supplied the necessary details and yet the FM won't push through.
If possible, please post sample codes.
Below is my sample code:
===============================================
REPORT zmm_materialupload.
eject
$$******************************************************************************
$$    TYPES
$$******************************************************************************
eject
$$******************************************************************************
$$    INTERNAL TABLES (custom structure
$$******************************************************************************
eject
$$******************************************************************************
$$    RANGES
$$******************************************************************************
eject
$$******************************************************************************
$$    FIELD-SYMBOLS
$$******************************************************************************
eject
$$******************************************************************************
$$    PARAMETERS & SELECT-OPTIONS
$$******************************************************************************
SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE text-001.
*SELECT-OPTIONS: s_matnr FOR mara-matnr.
SELECT-OPTIONS: s_mtart FOR mara-mtart.
SELECT-OPTIONS: s_mbrsh FOR mara-mbrsh DEFAULT 'P'.
SELECT-OPTIONS: s_werks FOR marc-werks DEFAULT '1000' OBLIGATORY.
SELECT-OPTIONS: s_lgort FOR marc-lgpro DEFAULT 'OPSL' OBLIGATORY.
PARAMETERS: p_path LIKE rlgrap-filename DEFAULT 'C:\Documents and Settings\training_11\Desktop\Book4 (2ITEMS).txt' OBLIGATORY.
SELECTION-SCREEN END OF BLOCK 1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_path.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      field_name = 'P_FNAME'
    IMPORTING
      file_name = p_path.
eject
$$******************************************************************************
$$    START-OF-SELECTION
$$******************************************************************************
START-OF-SELECTION.
PERFORM check_input.
PERFORM get_file.
PERFORM filter_input.
PERFORM populate_tabs.
PERFORM bapi_mat.
eject
$$******************************************************************************
$$    FORMS
$$******************************************************************************
FORM bapi_mat.
LOOP AT it_tab INTO wa_tab.
    CALL FUNCTION 'BAPI_MATERIAL_GETINTNUMBER'
      EXPORTING
        material_type    = wa_tab-mtart
        industry_sector = wa_tab-mbrsh
        required_numbers = 1
      TABLES
        material_number = it_matnr.
ENDLOOP.
LOOP AT it_matnr INTO wa_matnr.
    READ TABLE it_tab INTO wa_tab INDEX sy-tabix.
    wa_tab-matnr = wa_matnr-material.
    MODIFY it_tab FROM wa_tab INDEX sy-tabix.
ENDLOOP.
PERFORM populate_tabs.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
    EXPORTING
     headdata                   = it_headdata
    clientdata                 = it_clientdata
    clientdatax                = it_clientdatax
    plantdata                  = it_plantdata
    plantdatax                 = it_plantdatax
    FORECASTPARAMETERS         =
    FORECASTPARAMETERSX        =
    PLANNINGDATA               =
    PLANNINGDATAX              =
    STORAGELOCATIONDATA        =
    STORAGELOCATIONDATAX       =
    valuationdata              = it_valuationdata
    valuationdatax             = it_valuationdatax
     WAREHOUSENUMBERDATA        =
    WAREHOUSENUMBERDATAX       =
    SALESDATA                  =
    SALESDATAX                 =
    STORAGETYPEDATA            =
    STORAGETYPEDATAX           =
    flag_online                = ' '
    flag_cad_call              = ' '
    NO_DEQUEUE                 = ' '
    NO_ROLLBACK_WORK           = ' '
   IMPORTING
     return                     = it_return
   TABLES
     materialdescription        = it_materialdescription
     unitsofmeasure             = it_unitsofmeasure
     unitsofmeasurex            = it_unitsofmeasurex
     internationalartnos        = it_internationalartnos
     materiallongtext           = it_materiallongtext
     taxclassifications         = it_taxclassifications
     returnmessages             = it_returnmessages
    PRTDATA                    =
    PRTDATAX                   =
    EXTENSIONIN                =
    EXTENSIONINX               =
IF sy-subrc = 0.
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      wait   = 'X'
    IMPORTING
      return = it_return.
ENDFORM.                    "bapi_mat
*&      Form GET_FILE
      text
FORM get_file.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
    EXPORTING
      text = 'Getting data from file...'.
MOVE: p_path TO gv_file.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                = gv_file
      filetype                = 'ASC'
      has_field_separator     = 'X'
      read_by_line            = 'X'
    TABLES
      data_tab                = it_tab
    EXCEPTIONS
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      OTHERS                  = 17.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    "GET_FILE
*&      Form check_input
      text
FORM check_input.
Material Type
IF s_mtart-low IS INITIAL AND s_mtart-high IS INITIAL.
   s_mtart = 'IEQ'.
   s_mtart-low = 'ABF'.        "Waste
   s_mtart-high = 'ZTRD'.      "Stock Items
   APPEND s_mtart.
ENDIF.
IF s_mtart-low IS NOT INITIAL AND s_mtart-high IS INITIAL.
    MOVE: s_mtart-low TO s_mtart-high.
ENDIF.
Industry Sector
IF s_mbrsh-low IS INITIAL AND s_mbrsh-high IS INITIAL.
   s_mbrsh = 'IEQ'.
   SELECT mbrsh
   FROM mara
   INTO TABLE it_mbrsh.
   s_mbrsh-low = wa_mbrsh-mbrsh.
   LOOP AT it_mbrsh INTO wa_mbrsh.
     s_mbrsh-high = wa_mbrsh-mbrsh.
   ENDLOOP.
   APPEND s_mbrsh.
ENDIF.
IF s_mbrsh-low IS NOT INITIAL AND s_mbrsh-high IS INITIAL.
    MOVE: s_mbrsh-low TO s_mbrsh-high.
ENDIF.
Plant
IF s_werks-low IS INITIAL AND s_werks-high IS INITIAL.
    s_werks = 'IEQ'.
    s_werks-low = '1000'.
    s_werks-high = '2000'.
ENDIF.
IF s_werks-low IS NOT INITIAL AND s_werks-high IS INITIAL.
    MOVE: s_werks-low TO s_werks-high.
ENDIF.
Storage Location
IF s_lgort-low IS NOT INITIAL AND s_lgort-high IS INITIAL.
    MOVE: s_lgort-low TO s_lgort-high.
ENDIF.
ENDFORM.                    "check_input
*&      Form Filter_input
      text
FORM filter_input.
SORT it_tab BY matnr mtart mbrsh werks lgort.
LOOP AT it_tab INTO wa_tab.
   IF wa_tab-mtart NOT IN s_mtart.
     DELETE it_tab WHERE mtart NOT IN s_mtart.
   ENDIF.
   IF wa_tab-mbrsh NOT IN s_mbrsh.
     DELETE it_tab WHERE mbrsh NOT IN s_mbrsh.
   ENDIF.
    IF wa_tab-werks NOT IN s_werks.
      DELETE it_tab WHERE werks NOT IN s_werks.
    ENDIF.
    IF wa_tab-lgort NOT IN s_lgort.
      DELETE it_tab WHERE lgort NOT IN s_lgort.
    ENDIF.
ENDLOOP.
ENDFORM.                    "Filter_input
*&      Form populate_tabs
      text
FORM    populate_tabs.
LOOP AT it_tab INTO wa_tab.
    MOVE: wa_tab-matnr TO wa_headdata-material,
          wa_tab-mbrsh TO wa_headdata-ind_sector,
          wa_tab-mtart TO wa_headdata-matl_type,
                   'X' TO wa_headdata-basic_view,
                   'X' TO wa_headdata-sales_view,
                   'X' TO wa_headdata-purchase_view,
                   'X' TO wa_headdata-mrp_view,
                   'X' TO wa_headdata-account_view.
         wa_tab-matkl TO wa_clientdata-matl_group,
         wa_tab-meins TO wa_clientdata-base_uom,
         wa_tab-groes TO wa_clientdata-size_dim,
         wa_tab-gewei TO wa_clientdata-unit_of_wt,
         wa_tab-ntgew TO wa_clientdata-net_weight,
                  'X' TO wa_clientdatax-matl_group,
                  'X' TO wa_clientdatax-base_uom,
                  'X' TO wa_clientdata-size_dim,
                  'X' TO wa_clientdatax-unit_of_wt,
                  'X' TO wa_clientdatax-net_weight,
         wa_tab-werks TO wa_plantdata-plant,
         wa_tab-ekgrp TO wa_plantdata-pur_group,
         wa_tab-prctr TO wa_plantdata-profit_ctr,
         wa_tab-werks TO wa_plantdatax-plant,
                  'X' TO wa_plantdatax-pur_group,
                  'X' TO wa_plantdatax-profit_ctr,
         wa_tab-werks TO wa_valuationdata-val_area,
         wa_tab-bklas TO wa_valuationdata-val_class,
         wa_tab-peinh TO wa_valuationdata-price_unit,
         wa_tab-verpr TO wa_valuationdata-moving_pr,
         wa_tab-stprs TO wa_valuationdata-std_price,
         wa_tab-xlifo TO wa_valuationdata-lifo_fifo,
         wa_tab-werks TO wa_valuationdatax-val_area,
                  'X' TO wa_valuationdatax-val_class,
                  'X' TO wa_valuationdatax-price_unit,
                  'X' TO wa_valuationdatax-moving_pr,
                  'X' TO wa_valuationdatax-std_price,
                  'X' TO wa_valuationdatax-lifo_fifo.
    APPEND wa_headdata TO it_headdata.
   APPEND wa_clientdata TO it_clientdata.
   APPEND wa_plantdata TO it_plantdata.
   APPEND wa_valuationdata TO it_valuationdata.
   MODIFY it_tab FROM wa_tab TRANSPORTING matnr.
ENDLOOP.
ENDFORM.                    "populate_tabs
$$******************************************************************************

Hai.
check the below example.
REPORT z34332_bdc_create_material .
data: la_headdata type BAPIMATHEAD,
la_clientdata type BAPI_MARA,
la_CLIENTDATAX type BAPI_MARAX,
la_return type BAPIRET2.
data: i_materialdescription type table of BAPI_MAKT,
wa_materialdescription like line of i_materialdescription.
la_headdata-MATERIAL = '000000000000000004'.
la_headdata-IND_SECTOR = 'M'.
la_headdata-MATL_TYPE = 'FERT'.
la_clientdata-BASE_UOM = 'FT3'.
la_CLIENTDATAX-BASE_UOM = 'X'.
la_clientdata-MATL_GROUP = '01'.
la_CLIENTDATAX-MATL_GROUP = 'X'.
wa_materialdescription = 'TEST'.
append wa_materialdescription to i_materialdescription.
clear: wa_materialdescription.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = la_headdata
CLIENTDATA = la_clientdata
CLIENTDATAX = la_CLIENTDATAX
PLANTDATA =
PLANTDATAX =
FORECASTPARAMETERS =
FORECASTPARAMETERSX =
PLANNINGDATA =
PLANNINGDATAX =
STORAGELOCATIONDATA =
STORAGELOCATIONDATAX =
VALUATIONDATA =
VALUATIONDATAX =
WAREHOUSENUMBERDATA =
WAREHOUSENUMBERDATAX =
SALESDATA =
SALESDATAX =
STORAGETYPEDATA =
STORAGETYPEDATAX =
FLAG_ONLINE = ' '
FLAG_CAD_CALL = ' '
IMPORTING
RETURN = la_return
TABLES
MATERIALDESCRIPTION = i_materialdescription
UNITSOFMEASURE =
UNITSOFMEASUREX =
INTERNATIONALARTNOS =
MATERIALLONGTEXT =
TAXCLASSIFICATIONS =
RETURNMESSAGES =
PRTDATA =
PRTDATAX =
EXTENSIONIN =
EXTENSIONINX =
write: la_return-TYPE, ',', la_return-MESSAGE.
clear: la_headdata, la_return, la_clientdata, la_clientdatax.
regards.
sowjanya.b.

Need help in using ActiveX to retrieve a VARIANT

Need help in using ActiveX to retrieve a VARIANT.
Variant is shown as var{VT_Ul1,1} in debug
Using the following
hr = CA_VariantGetShort (&var, &value);
I get 0 for my answer instead of 1.
Solved!
Go to Solution.

Answered my own question.
VT_Ul1 is an unsigned char and not a short.

I need help my computer isn't working and there is no was to get on my iTunes and I just updated my phone and now it's stuck on where it shows the plug connected to iTunes help!!!!

I need help my computer isn't working and there is no was to get on my iTunes and I just updated my phone and now it's stuck on where it shows the plug connected to iTunes help!!!!

There is no other way than to plug into a computer to restore the phone. You can use another computer to do so, but in case you did not back up to iCloud your data and settings will be gone.
Follow this article to connect in recovery mode:
iOS: Unable to update or restore

Need help my window is in thai and i dont understand at all.how to convert to english?

need help my window is in thai and i dont understand at all.
how to convert to english? i been trying for days but still cannot change it.
because i cannot read thai..please help me step by step..
my pc is touchsmart 9100 windows 7 professional.
Not a single word is in english if i go to 'region and language' to change it.
Everthing is in thai in the system.
This question was solved.
View Solution.

Hi,
OK. That means the default display lange of the OS is Thai. That is what was purchased.
You can try downloading and using the language appropriate LIPS (language interface package software) from Microsoft to change the display language.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook.......

need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook? removal of cmos, resetting laptop, using cccleaner, windows password recovery and hiren's was noneffective, any help is appreciated. thanks

Hi,
As your notebook is a business class machine, security is more stringent - the password is stored in non-volatile memory and there are no 'backdoor' passwords. Your best option would be to contact HP regarding this.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Need Help on using Forge Config Manager and CAS. Questions listed in the content below

Similar Messages

Maybe you are looking for