Need help printing pagefooter conditionally based on page number

In the layout I'm working on, there is a <?call:footer?> in footer section. I want to avoid call it for certain pages. Eg. not print it on the first page.
Is there a page-variable available that can be used to conditionally test and print this? (in example below find something replacing "currentpagevariable")
Eg. <?if:currentpagevariable!='1'?><?call:footer?><?end if?>
Note, I've tried to use the "Different first page" option, but due to reports complexity in report header, cannot use this option.
Any suggestions as soon as possible would be much appreciated.
/Thanks, Dan

this is not possible.

Similar Messages

Adding logic based on page number

Hi,
in my invoice report, i need to add some logic based on page number. My objective is to print a group of 4 lines (OMR Marks) on right hand side of the page. For example, on first page, print 1st line only, on second page, print 2nd line only, on third page, print 1st and 2nd lines only, on 15th page, print all four lines, on 16th page, print lines similar to 1st page i.e. print 1st line only, on 17th pages, print lines similar to 2nd page i.e. print 2nd line only.
Is there any way to use page number or some other variable that can represent page number in an IF condition? Your help is highly appreciated.
Regards,
sanjai misra

Thanks for your reply.
I need to print OMR marks in our invoice report and i am not sure how to do it. I will highly appreciate your inputs.
I have to print OMR mark a per the logic given below
1. Divide the page number by 15
2. Based on remainder value, print 4 horizontal lines. For example,
if remainder is 1 then print only line 1,
if remainder is 2 then print only line 2.
if remainder is 3 then print line 1 and line 2.
If remainder is 4 then print only line 3,
if remainder is 5 then print line 1 and line 3
if remainder is 6 then print line 2 and line 3
if remainder is 7 then print line 1, 2, 3
if remainder is 8 then print only line 4 and so on
if remainder is 0 then print all lines i.e. line 1,2,3 and 4.
Could you please tell me how I could achieve this? If you have some code that you could share, it would be great.
OR is there some other way to achieve this?
Thanks,
sanjai misra

PDF document not full page but need to print it as a full page

Hi,
I have a pdf document which is 15 cm by 8 cm and need to print it as a full page without the white border making up the full page. How can I do this?
The document was created in publisher and saved as a pdf.
I am reading the document from Adobe Reader on a Windows XP machine.
Thank you for any help any one can give.

Do you have a printer that can print pages without a white border?
Very few printers can do this.
Aandi Inston

I need to print the footer in all pages except last page.

Hi,
I'm working on PO RTF template. I got one probelm, I need to print the footer in all pages except last page.
Can someone help me in this.
Thanks in advance.
Venki.

This question has been answered already multiple times - please search the forum before posting a question - in case you did and you didn't find it - we added a feature
in 5.6.2 to solve this problem - It is described in the user guide in the RTF template section search for start@last-page:
Last Page Support
XML Publisher now has the ability to show content only on the last page. This is useful for documents such as checks, invoices or purchase orders where you want want content such as the check or a summary in a specific place only on the last page.
The basic command is:
<?start@last-page:body?>
<?end body?>
http://forums.oracle.com/forums/search.jspa?threadID=&q=%40last-page&objID=f245&dateRange=last90days&userID=&numResults=15&rankBy=9
Any content above or below these two tags will only appear on the last page of the document.
Hope that helps,
Klaus

I need help with the conditional build tag option RoboHelp 10

I need help with the conditional build tag option. I want to apply CBT to content in a topic. I looked at the Help topics and believed that I applied the feature correctly. Howver, it is not working as desired. In the 2nd sentence below I want the text highlighted in blue to only appear for the printed output and the text printed in purple to only appear for the .htm /online output. Please help.
There are common tasks used to manage the folders in the Navigator and the folders
in the BBS Folders Viewer Grid. For more information on these common tasks see Help
and Support in Success Enterprise. click the links below.

Hi there
Using tagging is a two part process.
Part One
You create and apply the tags to the information you wish to control.
Part Two
You create a Build Expression that is used when you generate your output. The Build Expression typically reads something like: NOT Tag1 (or whatever your tag name is)
Then when you generate and use the Build Expression, the information tagged is not included in the build.
Cheers... Rick

I need help. When I open my "page" all my documents were gone. I need those things.

I need help. When I open my "page" all my documents were gone. I need those things.

I meant flickering means...when i open combobox and click focus is going out of air window as though combobox is in some another window. once click press mouse down...focus is in combo box but window loses focus and once releases mouse ..window back to focus. Kinda annoying effect when u try to click on combo box and select.
Tested with html scout sample app and load any webpage with combobox , window loses focus.
But any combobox made using EXT it do not flicker because ext handles focus event correctly.
My windows has set of combo box and user always select different value from combo box if keep losing focus and coming back its annoying as hell.

Need to print a bill in small page Adobe AIR

Hi All,
I need to print a bill in small page using adobe air. Generally when we print it will show in full page. But i am in need of printing them in bills just like printing bills in hotels or textiles etc.
regards,
Jayagopal.

Is the file enabled for printing? What happens when you try to print it? Pledase include complete error messages if any.

How to increment a value in a textfield based on page number

Hi,
I am doing PDF based print forms which is non interactive, i got a requirment where i have to increment the binded value of a text field based on page number.
presently i am using this code in initialize event of that textfield.
var curpage = $layout.page ( ref ( $ ) )
var totpages = $layout.pageCount()
$.rawValue = $.rawValue - totpages
$.rawValue = $.rawValue + curpage
but this is not helping me, can anyone help me regarding this

Thanks for yor reply.please you can tellme clearly how to set use 'NQ_SESSION.USER' to set the value to logged in User.i.e i have circle table in that users and circle names will be there.it is teradata database.so how can i set that in to the dashboard prompt and one thing along with that prompt the follwing prompts will be there
mobile no<>
date<>
circle name<"user">
this is my requirement so please help me step by step what to do for achiving this.
thanking oyu

Hi..i am trying to login i message but i cant access ,it thing i forgot my password number, please i need help,how i can reset new password number. please i need help.

hi..i am trying to login i message but i cant access ,it thing i forgot my password number, please i need help,how i can reset new password number. please i need help.

Go here.
Good luck,
Clinton

Need helping printing to networked printers.

I need help setting up network printers that have a code on them for each individual. There is no place to put a code so the printer will know who is printing what. I have installed 3 printers and they will not print, they just go to a paused mode and when you hit resume in reverts back to pause because it is looking for a code. I have tried it another way but it asks for a user name and password and all we have are codes. The workplace is using a windows based server and the copiers are listed as followed.
Konica biz hub c450
Sharp ar m700n
sharp mx700n
I need help to be able to print from my mac. I also have parallels running with xp installed and all the printers are installed on that side and printing fine. Hopefully someone can help me out.
Thanks in advance

Hello and welcome to Apple Discussions.
In order to provide the user with the ability to input a user code, the respective printer driver would have to provide the facility. If this feature did exist on a previous version of OS X, then you may have to check the vendors web site to see if there is a driver for 10.6.
If you are not sure if the function was supported previously, then go through all the user menus for the driver. The function may be present but located in an unusual location. Or it could require an additional file (aka plugin) that could be missing from the driver installation or not compatible with 10.6.
The other thing to note is that if you have the Mac's printing via a Windows queue, you will have to provide user credentials for SMB print queues. This is typically a Windows user account - not the Mac's account details. If you don't want to create accounts for the Mac users on the Windows server, then you can use LPD rather than SMB to connect to the Windows queues. This does require UNIX Printing Services to be enabled on the server.
Pahu

Need help with my usecase based on transient ViewObject

I am using 11.1.1.4.0 Jdev version. I need help with my usecase.Been trying it for 2 days but couldn't figure out the issue.
I have a transientVO . In this VO Rows will be populated programmatically. CountryId is an attribute of this VO. I have created a viewAccessor "CountriesVA" from Country VO of HR schema.
I have a LOV for the countryId which is based on this VA ,getting countries from CountryTable.
This is the model part which works fine.
Before the page load i have called a method to create a row for this transientVO.Once the row is created i can see the SOC in my page which i have created as below.
Now i want to insert a row in the transientVO if user selects a country and restrict duplicate entry . (As One row is already created 1st time there will be no rows created.after that rows will be inserted)
The issue is :: Suppose there are 2 countries. A & B .When user does the following actions :
Insert A . Done //as 1st entry
Insert B . Done //as 1st time entry
Insert A . duplicate not inserted
Insert B . getting inserted // the bug.
<af:selectOneChoice value="#{bindings.CountryId.inputValue}"
 label="#{bindings.CountryId.label}"
 required="#{bindings.CountryId.hints.mandatory}"
 shortDesc="#{bindings.CountryId.hints.tooltip}" id="soc1"
 immediate="true" autoSubmit="true"
 valueChangeListener="#{pageFlowScope.managedBean.countryIdVC}">
 public void countryIdVC(ValueChangeEvent valueChangeEvent) {
 // Add event code here...
 String oldValue=null;
 setEL("#{bindings.CountryId.inputValue}", valueChangeEvent.getOldValue());
 if(evaluateEL("#{bindings.CountryId.attributeValue}")!=null)
 oldValue =evaluateEL("#{bindings.CountryId.attributeValue}").toString();
 setEL("#{bindings.CountryId.inputValue}", valueChangeEvent.getNewValue());
 String newValue=evaluateEL("#{bindings.CountryId.attributeValue}").toString();
 BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
 DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("ViewObj1Iterator");
 //access the underlying RowSetIterator
 RowSetIterator rsi = dciter.getRowSetIterator();
 boolean duplicate=true;
 if(oldValue!=null){
 rsi.getCurrentRow().setAttribute("CountryId", oldValue);
 // Row row= rsi.findByKey(new Key(new Object[] { newValue}), 1)[0];
 Key key =new Key(new Object[] { newValue});
 Row row=rsi.getRow(key);
 if(row==null){
 System.err.println(duplicate);
 duplicate=false;
 }else{
 rsi.setCurrentRow(row);
 if(!duplicate){
 //get handle to the last row
 Row lastRow = rsi.last();
 //obtain the index of the last row
 int lastRowIndex = rsi.getRangeIndexOf(lastRow);
 //create a new row
 Row newRow = rsi.createRow();
 newRow.setAttribute("CountryId", newValue);
 //initialize the row
 newRow.setNewRowState(Row.STATUS_INITIALIZED);
 //add row to last index + 1 so it becomes last in the range set
 rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow);
 //make row the current row so it is displayed correctly
 rsi.setCurrentRow(newRow);

I read the reply from Andrejus Baranovskis and thought of studying and implementing that in my useCase.Well it worked . I implemented the same Logic but rowIteration was done in AppModule.
Con-Fusion, Bugs, Facts &amp; Workarounds: Iterating through View Object RowIterator Bug.(NOT ADF BUG, Development B…
http://docs.oracle.com/cd/E15523_01/web.1111/b31974/bcservices.htm#sm0206
9.7.6 What You May Need to Know About Programmatic Row Set Iteration
The problem is solved ,the above links helped me solve the problem.
what i did is i have created a method in appmodule to iterate rows and all the method y operation bindings and my logic works fine ....
MY Advice to all Adf developers ,though i am not an expert but i can assure you to follow the above process for rowIteration.If you use the iterator binding in the manage bean to navigate the rows u'll face issues which are unexpected.
In AppModule :::::
 public boolean createRow(String oldValue,String newValue){
 System.err.println(oldValue+""+newValue);
 ViewObjectImpl vo=getViewObj1();
 boolean duplicate=false;
 if(oldValue!=null){
 RowSetIterator iter = vo.createRowSetIterator(null);
 System.err.println("iterating rows ");
 while (iter.hasNext()) {
 Row r = iter.next();
 System.err.println(iter.getRangeIndexOf(r)+" row is "+r.getAttribute("CountryId"));
 if(r.getAttribute("CountryId").toString().equals(newValue)){
 duplicate=true;
 break;
 // Do something with the current row.
 // close secondary row set iterator
 iter.closeRowSetIterator();
 return duplicate;
In ManageBean :::::
 public void countryIdVC(ValueChangeEvent valueChangeEvent) {
 // Add event code here...
 String oldValue=null;
 System.err.println("Old Value"+valueChangeEvent.getOldValue());
 setEL("#{bindings.CountryId.inputValue}", valueChangeEvent.getOldValue());
 if(evaluateEL("#{bindings.CountryId.attributeValue}")!=null)
 oldValue =evaluateEL("#{bindings.CountryId.attributeValue}").toString();
 setEL("#{bindings.CountryId.inputValue}", valueChangeEvent.getNewValue());
 String newValue=evaluateEL("#{bindings.CountryId.attributeValue}").toString();
 BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
 //access the name of the iterator the table is bound to. Its "allDepartmentsIterator"
 //in this sample
 DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("ViewObj1Iterator");
 //access the underlying RowSetIterator
 RowSetIterator rsi = dciter.getRowSetIterator();
 if(oldValue!=null){
 rsi.getCurrentRow().setAttribute("CountryId", oldValue);
 OperationBinding operation = bindings.getOperationBinding("createRow");
 operation.getParamsMap().put("oldValue", oldValue);
 operation.getParamsMap().put("newValue", newValue);
 if(!(Boolean)operation.execute()){
 //get handle to the last row
 Row lastRow = rsi.last();
 //obtain the index of the last row
 int lastRowIndex = rsi.getRangeIndexOf(lastRow);
 //create a new row
 Row newRow = rsi.createRow();
 newRow.setAttribute("CountryId", newValue);
 //initialize the row
 newRow.setNewRowState(Row.STATUS_INITIALIZED);
 //add row to last index + 1 so it becomes last in the range set
 System.err.println("Inserting row at index "+lastRowIndex+1);
 rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow);
 //make row the current row so it is displayed correctly
 rsi.setCurrentRow(newRow);
 else{
 System.err.println("Data found So not inserting,only setting current Row");
 Key key =new Key(new Object[] { newValue});
 rsi.setCurrentRow(rsi.getRow(key));

Need help printing tiff files

I have written some code that prints any file that can be opened using JAI and the ImageIO Tools. The code works good for me but I have some special cases where I am having some difficulty. Some files I need to print are TIFF files with many pages. Some are compressed using Fax Group 4 encoding and others are compressed using OLD jpeg-in-tiff. I can read and print the files just fine, but it takes about 2 seconds to print each page. Also the spooling data for 88 pages is 900 MB in size. Printing the same files using IrfanView takes <1 seconds and the spool file is much smaller (equivalent to the size of the uncompressed tiff) The speed and size issues are problems for me because I am working on a print web service. My code to render each page is below. So far I have tried rendering hints and such to increase speed, but I think the problem is that when I read the image it takes up a lot of space in memory.
Here is the overall requirements for what I am doing: A use will request that the server print a set of files (mixed image formats, restricted to TIFF, JPEG, and GIF) be printed to specific printer as a single print job. They can specify copies and collation only. The service will open each file in order and send its data to the printer. I have created a custom class that implements the Printable interface to handle the multiple files. The class below is created for each file and handles the printing of the image file.
I am using JDK 1.4.2 and WebSphere. I am stuck with these options b/c I have to use some IBM API's (IBM Content Manager 8.3) that are not compatible with 1.5 or higher.
Is there any way to speed up my code. Possibly load the image differently?
import java.awt.Graphics2D;
import java.awt.RenderingHints;
import java.awt.geom.AffineTransform;
import java.awt.image.BufferedImage;
import java.awt.print.PageFormat;
import java.awt.print.Printable;
import java.awt.print.PrinterException;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.IOException;
import javax.imageio.ImageIO;
import javax.imageio.ImageReader;
import javax.imageio.stream.FileImageInputStream;
import javax.imageio.stream.ImageInputStream;
public class ImagePrinter2 implements Printable
 public static final int PAPER_SIZE_LETTER = 0;
 public static final int PAPER_SIZE_LEGAL = 1;
 private final ImageReader reader;
 private final int _pageCount;
 private final File imageFile;
 private int _pageOffset;
 public ImagePrinter2(File imageFile) throws IOException
 this.imageFile = imageFile;
 ImageInputStream fis = new FileImageInputStream(this.imageFile);
 reader = (ImageReader) ImageIO.getImageReaders(fis).next();
 reader.setInput(fis);
 _pageCount = reader.getNumImages(true);
 public int print(java.awt.Graphics g, java.awt.print.PageFormat pf, int pageIndex)
 throws java.awt.print.PrinterException
 BufferedImage image = null;
 int currentPage = pageIndex - getPageOffset(); //pageIndex is for the overall job, I need the page in this file
 int imgWidth = 0, imgHeight = 0;
 int drawX = 0, drawY = 0;
 double scaleRatio = 1;
 try
 image = reader.read(currentPage);
 imgWidth = image.getWidth();
 imgHeight = image.getHeight();
 catch (IndexOutOfBoundsException e)
 return NO_SUCH_PAGE;
 catch (IOException e)
 throw new PrinterException(e.getLocalizedMessage());
 if (imgWidth > imgHeight)
 pf.setOrientation(PageFormat.LANDSCAPE);
 else
 pf.setOrientation(PageFormat.PORTRAIT);
 Graphics2D g2 = (Graphics2D) g;
 g2.setRenderingHint(RenderingHints.KEY_RENDERING, RenderingHints.VALUE_RENDER_SPEED);
 g2.translate(pf.getImageableX(), pf.getImageableY());
 g2.setClip(0, 0, (int) pf.getImageableWidth(), (int) pf.getImageableHeight());
 scaleRatio =
 (double) ((imgWidth > imgHeight)
 ? (pf.getImageableWidth() / imgWidth)
 : (pf.getImageableHeight() / imgHeight));
 //check the scale ratio to make sure that we will not write something off the page
 if ((imgWidth * scaleRatio) > pf.getImageableWidth())
 scaleRatio = (pf.getImageableWidth() / imgWidth);
 else if ((imgHeight * scaleRatio) > pf.getImageableHeight())
 scaleRatio = (pf.getImageableHeight() / imgHeight);
 //center image
 if (scaleRatio < 1)
 drawX = (int) ((pf.getImageableWidth() - (imgWidth * scaleRatio)) / 2);
 drawY = (int) ((pf.getImageableHeight() - (imgHeight * scaleRatio)) / 2);
 else
 drawX = (int) (pf.getImageableWidth() - imgWidth) / 2;
 drawY = (int) (pf.getImageableHeight() - imgHeight) / 2;
 AffineTransform at = AffineTransform.getTranslateInstance(drawX, drawY);
 if (scaleRatio < 1)
 at.scale(scaleRatio, scaleRatio);
 g2.drawRenderedImage(image, at);
 g2.dispose();
 image = null;
 return PAGE_EXISTS;
 * 
 * Created By: TSO1207 - John Loyd
 * @since version XXX
 * @return
 public int getPageCount()
 return _pageCount;
 * 
 * Created By: TSO1207 - John Loyd
 * @since version XXX
 * @return
 public int getPageOffset()
 return _pageOffset;
 * 
 * Created By: TSO1207 - John Loyd
 * @since version XXX
 * @param i
 protected void setPageOffset(int i)
 _pageOffset = i;
 * Release the reader resources
 * 
 * Created By: TSO1207 - John Loyd
 * @since version XXX
 public void destroy()
 try
 ((ImageInputStream) reader.getInput()).close();
 catch (Exception e)
 reader.reset();
 reader.dispose();
 * Helps release memory used when printing (seems to be a 1.4.2 thing)
 * 
 * Created By: TSO1207 - John Loyd
 * @since version XXX
 public void reset() throws FileNotFoundException, IOException
 try
 ((ImageInputStream) reader.getInput()).close();
 catch (Exception e)
 reader.reset();
 ImageInputStream fis = new FileImageInputStream(imageFile);
 reader.setInput(fis);
}

I found a couple of issues. One was related to code the other to IBM. AS for the code I found an article about drawing scaled images here: http://today.java.net/pub/a/today/2007/04/03/perils-of-image-getscaledinstance.html which was quite useful. My updated code is below. The second issues is that the JRE I am using is the IBM Websphere 5.1 JRE which pretty much sicks. I tested using a Sun statndard 1.4.2 JRE and the print was 5 times faster. Now I am looking to find a way around that issue, but it is not a questions for this form.
public int print(java.awt.Graphics g, java.awt.print.PageFormat pf, int pageIndex)
 throws java.awt.print.PrinterException
 BufferedImage image = null;
 int currentPage = pageIndex - getPageOffset(); //pageIndex is for the overall job, I need the page in this file
 int imgWidth = 0, imgHeight = 0;
 int drawX = 0, drawY = 0;
 double scaleRatio = 1;
 try
 image = reader.read(currentPage);
 imgWidth = image.getWidth();
 imgHeight = image.getHeight();
 catch (IndexOutOfBoundsException e)
 return NO_SUCH_PAGE;
 catch (IOException e)
 throw new PrinterException(e.getLocalizedMessage());
 if (imgWidth > imgHeight)
 pf.setOrientation(PageFormat.LANDSCAPE);
 else
 pf.setOrientation(PageFormat.PORTRAIT);
 Graphics2D g2 = (Graphics2D) g;
 g2.setRenderingHint(RenderingHints.KEY_RENDERING, RenderingHints.VALUE_RENDER_SPEED);
 g2.translate(pf.getImageableX(), pf.getImageableY());
 g2.setClip(0, 0, (int) pf.getImageableWidth(), (int) pf.getImageableHeight());
 scaleRatio =
 (double) ((imgWidth > imgHeight)
 ? (pf.getImageableWidth() / imgWidth)
 : (pf.getImageableHeight() / imgHeight));
 //check the scale ratio to make sure that we will not write something off the page
 if ((imgWidth * scaleRatio) > pf.getImageableWidth())
 scaleRatio = (pf.getImageableWidth() / imgWidth);
 else if ((imgHeight * scaleRatio) > pf.getImageableHeight())
 scaleRatio = (pf.getImageableHeight() / imgHeight);
 //find the scaled width and height
 int scaledWidth = imgWidth, scaledHeight=imgHeight;
 //center image
 if (scaleRatio < 1)
 drawX = (int) ((pf.getImageableWidth() - (imgWidth * scaleRatio)) / 2);
 drawY = (int) ((pf.getImageableHeight() - (imgHeight * scaleRatio)) / 2);
 //new code to set the scale
 scaledWidth = (int)(scaledWidth * scaleRatio);
 scaledHeight = (int)(scaledHeight * scaleRatio);
 else
 drawX = (int) (pf.getImageableWidth() - imgWidth) / 2;
 drawY = (int) (pf.getImageableHeight() - imgHeight) / 2;
/*don't need transform
 /*AffineTransform at = AffineTransform.getTranslateInstance(drawX, drawY);
 if (scaleRatio < 1)
 at.scale(scaleRatio, scaleRatio);
 g2.drawRenderedImage(image, at);*/
 //use scale instance of draw image
 g2.drawImage(image, drawX, drawY, scaleWidth, scaleHeight, null);
 g2.dispose();
 image = null;
 return PAGE_EXISTS;
 }Edited by: jloyd01 on Mar 7, 2008 1:35 PM

Need help Printing Address labels from Address Book

I have a new iMac using OS X.4 1. I want to print address labels for Christmas cards. 2. I want to print several address labels of the same information for return address labels. I can't seem to figure it out. I've read the Help. I don't see where to put the # of labels per page. I created a Directory with only one name it it (so it would print several times on one page.) I selected Avery Standard - label 5162. Under label I selected Distribution List. I seem to be missing something.
Thanks for any help you can give me.

I wanted to do the same thing. The only way I was able to do this was to create a new group, then enter my name and address 30 times (the number of labels per sheet on Avery 8160). Then I was able to print as many sheets as I wanted. The bad news is you have to enter 30 times, the good news is once you done it you can print as many labels as you need. good luck

I need help printing with HP laserjet 2200 and OS 10.6

I need help setting up my HP laserjet 2200 and OS 10.6 -- I've downloaded and installed all the software and still can't print.

Hey jeo1951,
If you haven't already, try running through the recommended steps in the following article:
Mac 101: Printing (Mac OS X v10.6)
http://support.apple.com/kb/HT3771
It should help you set up your printer.
Welcome to Apple Support Communities!
All the best,
Delgadoh

Need Help Printing Text Messages From E71

I need to print some saved text messages that are on my e71 but cannot ge **bleep** to hook up to my bluetooth printer it just never finds it. Is there another way to print these messages fromt he phone i really need them

connect to pc and use ovi suite
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Need help printing pagefooter conditionally based on page number

Similar Messages

Maybe you are looking for