Need help reading an internal table

Howdy,
I have an internal table (itab_knvh) that contains all the entries from table KNVH for a specified sales area.
Now I have another internal table (itab_kunnr) that contains all the customers that I need data for.
How can I read all the entries from itab_knvh where the 'date from' value (datab) is greater than today's date?
At the moment I have:
 LOOP AT itab_kunnr.
 READ TABLE itab_knvh WITH KEY kunnr = itab_kunnr-kunnr.
 IF sy-subrc = 0.
 IF itab_knvh-datab GE p_validh.
 WRITE:/ itab_kunnr.
 ENDIF.
 ENDIF.
ENDLOOP.
but I don't think this will work if more than one customer entry exists in itab_knvh.
So is there a way of writing:
READ TABLE itab_knvh WITH KEY kunnr = itab_kunnr-kunnr
 datab GE sy-datum.
Any ideas???

Hi Steve,
If you have written exactly the same SELECT statement as you have posted here, then it is in error.
Try this one out, instead.
select single hkunnr
 datab
 hzuor
 from knvh
 into (itab_hier_output-old_kunnr,
 itab_hier_output-old_datab,
 itab_hier_output-old_hzuor)
 where kunnr = itab_kunnr-kunnr
 and datbi = itab_hier_output-new_datab.
Regards,
Anand Mandalika.

Similar Messages

Need help in processing internal table

Hi all,
Im facing a problem in processing an internal table..especially with MODIFY.
The internal table is having following records.(t_vttp)
TKNUM       VBELN      KUNNR       NAME1                             LAND1
0000975179|0071004839|0000022946|HUNTSMAN APC LIMITED               |SA   |
0000975180|0071004845|0000022946|                                   |     |
In the above, there are two delviry documents with same customers.
The customer data is coming from different internal table.
LOOP AT t_vttp.
    READ TABLE t_kna1_temp INTO wa_kna1_temp WITH KEY kunnr = t_vttp-kunnr.
    IF sy-subrc = 0.
      t_vttp-name1 = wa_kna1_temp-name1.
      t_vttp-land1 = wa_kna1_temp-land1.
      MODIFY t_vttp INDEX sy-tabix TRANSPORTING name1 land1.
    ENDIF.
ENDLOOP.
Here for second record,,the customer name and country is nt getting populated to t_vttop.
Pls correct where it is going wrong.
Thanks,
Priya

Hi Try the follwoing code with a little modification in your code.
LOOP AT t_vttp.
READ TABLE t_kna1_temp INTO wa_kna1_temp WITH KEY kunnr = t_vttp-kunnr.
IF sy-subrc = 0.
t_vttp-name1 = wa_kna1_temp-name1.
t_vttp-land1 = wa_kna1_temp-land1.
MODIFY t_vttp INDEX sy-tabix TRANSPORTING name1 land1.
append t_vttp.
ENDIF.
clear: wa_kna1_temp, t_vttp.
ENDLOOP
Also Please debugg your code and check if you are getting values.
also check the value of t_vttp-kunnr in debugging for the second run of your loop.
thanks
lalit

Need help to find internal table.

hello friends,
i am working on a smart form i am given a transaction code, vf03 and a custom program and a custom function module,
i tried to use /h to do the debugging through vf03, but i could not understand where the control was going it was all roaming inthe standard code,
what all i need to do is to reach the internal table in the smartform, and do some modifications.
now how do i reach the internal table.
thank you.

if you know smartform print program,then use se38 transaction-> use smart form print program and keep break point here.
Now run VF03 transaction and see it
Thanks
Seshu

Search Help values to Internal table

Dear Friends,
Is it possible to export Search Help values to Internal table?
On screen, when user click on Search button, the SAP standard search help will call (Customer Search). After entering values, some result get displayed and this result need to export to the internal table.
Thanks in stack
Nilesh

Hi:
try this:
DATA : wa_shlp TYPE shlp_descr,
           it_records LIKE ddshretval OCCURS 0 WITH HEADER LINE.
wa_shlp-SHLPNAME = 'MAT0M'.   "one of elementary search help name from mara-matnr.
wa_shlp-SHLPTYPE = 'SH'.
CALL FUNCTION 'F4IF_SELECT_VALUES'
     EXPORTING
       shlp                   = wa_shlp
MAXROWS                = 0
SORT                   = ' '
CALL_SHLP_EXIT         = ' '
IMPORTING
MAXROWS_EXCEEDED       =
    TABLES
RECORD_TAB             =
RECDESCR_TAB           =
      return_tab            = it_records
LOOP AT it_records.
WRITE:/ it_records.
ENDLOOP.
Follows is how to get the search help name:
CALL FUNCTION 'DD_SHLP_GET_HELPMETHOD'
EXPORTING
    tabname                 = 'MARA'
    fieldname               = 'MATNR'
    langu                   = sy-langu
NO_CHKTAB_MAPPING       =
GET_ENTITYTAB           = ' '
   CHANGING
     shlp                    = wa_shlp
callcontrol             = callcontrol
EXCEPTIONS
    field_not_found         = 1
    no_help_for_field       = 2
    OTHERS                  = 3
CALL FUNCTION 'F4IF_EXPAND_SEARCHHELP'
   EXPORTING
     shlp_top = wa_shlp
   IMPORTING
     shlp_tab = shlps.
好运,
启明星

Help on Delete Internal table records

Hi,
I have a internal table with some records in it.
I need to delete the contents of this based on the condition as below.
if product_search-Resp_product_company is not initial.
SORT i_equi BY zzrefeng.
DELETE i_equi WHERE zzrefeng <> product_search-Resp_product_company.
endif.
when i execute this all the records are getting deleted irrespective of the condition mentioned.
Can anyone help me on this.
Regards,
Ram

Hi,
Need to delete the records if ZZREFENG does not have the value of product_search-Resp_product_company .
Here I have product_search-Resp_product_company value as FI14. And also the internal table contains some records with ZZREFENG = FI14.
I need to delete the internal table records if ZZREFENG <> FI14. But when i execute the statement it is deletng all the records even ZZREFENG = FI14 records also.
Regards,
Ram

How to read an internal table with more than one (2 or 3) key field(s).

how to read an internal table with more than one (2 or 3) key field(s). in ecc 6.0 version

hi ,
check this..
report.
tables: marc,mard.
data: begin of itab occurs 0,
      matnr like marc-matnr,
      werks like marc-werks,
      pstat like marc-pstat,
      end of itab.
data: begin of itab1 occurs 0,
      matnr like mard-matnr,
      werks like mard-werks,
      lgort like mard-lgort,
      end of itab1.
parameters:p_matnr like marc-matnr.
select matnr
       werks
       pstat
       from marc
       into table itab
       where matnr = p_matnr.
sort itab by matnr werks.
select matnr
       werks
       lgort
       from mard
       into table itab1
       for all entries in itab
       where matnr = itab-matnr
       and werks = itab-werks.
sort itab1 by matnr werks.
loop at itab.
read table itab1 with key matnr = itab-matnr
                          werks = itab-werks.
endloop.
regards,
venkat.

Performance Issue When Read from Internal Table

In my form, I have 6 windows which contain all the header information, which are kept in my gt_header internal table. Since all windows required data from the same internal table, reading the internal table at Initialization for once or, creating the LOOP at each window, which one will be a better choice in terms of performance?

Hi,
you cannot create 6 windows under loop.You can only have loop under a window only.
So create a big window which covers whole area of 6 windows.Create templete under that and write only one loo with text in all those boxes of that templete.
Regards,
Rock.

Need help reading burn CDR mp3 and dvdrw from my superdrive

my Super Drive was fine untill i upgrade to Maverick now it wouldnt read the music on all of my burn cdr disk and dvdrw . ALso .need help reading my external 2TB External Ntfs Hard drive.....

To many conflicting information...
my Super Drive was fine untill i upgrade to Maverick
Per your system profile: "Mac mini, Mac OS 9.1.x"
Mac Minis do not have a superdrive. You also posted in the Intel iMac forums.
Please correct and/or update so that you will be provided w/the correct troubleshooting suggestions.

Need urgent help on dynamic internal table.

Hi experts,
I got an editable dynamic internal table. When the value in 1 of the editable field has been changed, I will fire the the DATA_CHANGED event. In this event, I can get the row ID where the changes occur, but the problem is, how can I select back the data from the dynamic internal table using the row ID since index is not permitted to be used? I need to get the rest of the records form the ROW and then perform a database update accordingly. How can I select from the dynamic internal table given the row ID? THanks in advance.

Hi
I suppose it depends on the kind of internal table assigned to fieldsymbol, this sample works fine:
FIELD-SYMBOLS: <FS> TYPE TABLE,
 <WA> TYPE ANY.
DATA: BEGIN OF ITAB OCCURS 0,
 FIELD,
 END OF ITAB.
DO 10 TIMES.
ITAB-FIELD = 'a'.
APPEND ITAB.
ENDDO.
ASSIGN ITAB[] TO <FS>.
READ TABLE <FS> ASSIGNING <WA> INDEX 1.
WRITE <WA>.
It can't use the index with internal table of kind HASHED.
Max

Need Help:Reading Data from RU payroll cluster for table GRREC

Hi...
I need help on how to read data from RU cluster table for table GRREC for the employee & run date and get the value from structure PC292 .
Please let me know about the includes and the import and export statements to be used.
Thanks in advance,
RAVI.

Hi,
Here goes pseudocode
Includes:
include: rpppxd00    ,
            rpppxd10     ,
            rpc2cd09     ,
            rpc2rx02_ce , "if ldb pnp_ce is used else use the same include with out _ce
            rpc2rx29      ,
            rpc2rx39      ,
            rpppxm00    ,
            rpc2ruu0_ce ,
Declare:
DATA : i_rgdir   LIKE pc261        OCCURS 0 WITH HEADER LINE     ,
           i_result TYPE pay99_result OCCURS 0 WITH HEADER LINE ,
           i_grrec   LIKE pc292           OCCURS 0 WITH HEADER LINE .
start-of-selection:
GET pernr.
Get the RGDIR VALUE for the current PERNR & selected Molga
get rgdir data TABLES i_rgdir
                      USING pernr-pernr
                                 p_molga " parameter
CD-KEY-PERNR = PERNR-PERNR.
RP-IMP-C2-CU.
i_rgdir [] = rgdir[].
LOOP AT i_rgdir WHERE fpbeg LE pn-endda
                    AND fpend GE pn-begda
                    AND srtza EQ 'A'
                    AND void   NE   'V'.
get_result_tabs   TABLES i_result
                               USING 'RU'    " US cluster
                                     pernr-pernr
                                     i_rgdir-seqnr
      RX-KEY-PERNR = PERNR-PERNR.
      UNPACK i_RGDIR-SEQNR TO RX-KEY-SEQNO.
      RP-IMP-C2-RU.
i_grrec[] = i_result-inter-grrec[].
LOOP AT i_grrec.
case i_grrec.
use wage types required here and pass the data to output table.
endcase.
endloop.
endloop
end-of-selction.

Need help- need to read a customer table from the payroll schema

Hi gurus,
I need to read an amonunt from a customer table in the payroll schema. Is it possible to input TABLE XXXX in the schema, or is impossible to read from a customer table?Do I need to create a report to upload the amount in an infotype?
Thanks in advanced for for support!

You should create your own custom operation (based on operation TABLE) to read your custom table from a Payroll PCR.
If your custom table's name is longer than 5 characters, you may be required to use operations VAOFF and/or VALEN prior to your custom operation in the PCR.

End Routine ABAP to read from Internal table and do calculation.

Hi All...
I have completed some coding in a start routine to extract some fields from a DSO containing Master Data (Stock Age) into an internal table (the internal table has been defined in the global declarations area) which will then be read in the end routine.
(the internal table will be read) at loadtime in the end routine and used in a calculation as described below.
I.E
GLOBAL DATA DECLARATION
Data: ITAB1 TYPE TABLE OF /BIC/DSOTAB
(DSOTAB has 3 fields PLANT, STYLE, 1STDATE (1STDATE IS A DATE FIELD)
The start routine has the following code:
IF ITAB1 IS INITIAL.
SELECT /BIC/PLANT /BIC/STYLE /BIC/1STDATE
 FROM /BIC/DSOTAB
 INTO CORRESPONDING FIELDS OF TABLE ITAB1.
This is working fine when run under simulation i.e ITAB1 is filled no problem.
I then need to do a calculation in the end routine.
1. First I have to find the record in the internal table using the key of PLANT AND STYLE from the RESULT_PACKAGE.
The code i am using now is as follows....
 READ TABLE ITAB1 TRANSPORTING NO FIELDS WITH KEY
 /BIC/PLANT = <result_fields>-/BIC/PLANT /BIC/STYLE =
 <result_fields>-/BIC/STYLE.
Once this record has been read I then have to perform the following calculation using the following additional fields
<result_fields>-/BIC/DYS1ST is a NUMC field in the <result_fields> that will be be filled by the result of the calculation described below.
<result_fields>-CALDAY is a date field which is already populated in the <result-fields> which is used in the calculation below.
The Calculation required is a difference in days between two dates
DYS1ST = CALDAY - 1STRED.
The code i am using is
If sy-subrc = 0.
 <result_fields>-/BIC/DYS1ST = <result_fields>-CALDAY -
 i_t_1stred_dso-/BIC/1STRED.
So the whole section of code inside the LOOP at RESULT PACKAGE looks like this in the end routine
 READ TABLE ITAB1 TRANSPORTING NO FIELDS WITH KEY
 /BIC/PLANT = <result_fields>-/BIC/PLANT /BIC/STYLE =
 <result_fields>-/BIC/STYLE.
IF sy-subrc = 0.
 <result_fields>-/BIC/DYS1ST = <result_fields>-CALDAY -
 i_t_1stred_dso-/BIC/1STRED.
Im getting the error
"ITAB1 " is a table without a header line and therefore has no component called "/BIC/1STRED
Please can someone advise as to what I need to do to get this fixed please.
Thanks in advance
Stevo:)

Hi,
You will have to do few changes in your code as below,
GLOBAL DATA DECLARATION
Data: ITAB1 TYPE standard TABLE OF /BIC/DSOTAB.
After that declare a workarea to read the values.
DATA: i_wa_itab1 type /bic/dsotab.
(DSOTAB has 3 fields PLANT, STYLE, 1STDATE (1STDATE IS A DATE FIELD)
The start routine has the following code:
IF ITAB1 IS INITIAL.
SELECT /BIC/PLANT /BIC/STYLE /BIC/1STDATE
FROM /BIC/DSOTAB
INTO CORRESPONDING FIELDS OF TABLE ITAB1.
This is working fine when run under simulation i.e ITAB1 is filled no problem.
I then need to do a calculation in the end routine.
1. First I have to find the record in the internal table using the key of PLANT AND STYLE from the RESULT_PACKAGE.
The code i am using now is as follows....
READ TABLE ITAB1 TRANSPORTING NO FIELDS WITH KEY
/BIC/PLANT = <result_fields>-/BIC/PLANT /BIC/STYLE =
<result_fields>-/BIC/STYLE.
Once this record has been read I then have to perform the following calculation using the following additional fields
<result_fields>-/BIC/DYS1ST is a NUMC field in the <result_fields> that will be be filled by the result of the calculation described below.
<result_fields>-CALDAY is a date field which is already populated in the <result-fields> which is used in the calculation below.
The Calculation required is a difference in days between two dates
DYS1ST = CALDAY - 1STRED.
The code i am using is
If sy-subrc = 0.
<result_fields>-/BIC/DYS1ST = <result_fields>-CALDAY -
i_t_1stred_dso-/BIC/1STRED.
So the whole section of code inside the LOOP at RESULT PACKAGE looks like this in the end routine
READ TABLE ITAB1 into i_wa_itab1 WITH KEY
/BIC/PLANT = <result_fields>-/BIC/PLANT /BIC/STYLE =
<result_fields>-/BIC/STYLE.
IF sy-subrc = 0.
<result_fields>-/BIC/DYS1ST = <result_fields>-CALDAY -
i_wa_itab1-/BIC/1STRED.
Once you do this changes, your code will work fine.
Regards,
Durgesh.

Need to make the internal table structure dynamic

Hi ,
I need to upload data from an excel file, the columns in the excel keep on varying
E.g the number of columns in one excel file can be 10, in the second excel file it can be 15.
So in order to upload the data into an internal table the structre of internal table needs to be dynamic and change according to the number of fields in the input file .
Is it possible by using field symbols or is there any other method to do the same
Thanks.
Nishant
Edited by: nishant patel on Sep 17, 2009 10:48 AM

Hi Nishant,
According to ur requirement, dynamic internal table can be created like below. But database table name has to passed dynacimally.
 DATA: ftab TYPE STANDARD TABLE OF ddfield,
 ftab_wa TYPE ddfield,
 fcat_itab TYPE lvc_t_fcat,
 fcat_wa TYPE lvc_s_fcat,
 poi_itab TYPE REF TO data.
FIELD-SYMBOLS: <itab> TYPE STANDARD TABLE.
 CALL FUNCTION 'DD_NAMETAB_TO_DDFIELDS'
 EXPORTING
 tabname = p_table " Pass database table name dynamically
 TABLES
 ddfields = ftab.
 LOOP AT ftab INTO ftab_wa.
 fcat_wa-fieldname = ftab_wa-fieldname.
 fcat_wa-ref_field = ftab_wa-fieldname.
 fcat_wa-ref_table = p_table.
 APPEND fcat_wa TO fcat_itab.
 ENDLOOP.
 CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = fcat_itab
 IMPORTING
 ep_table = poi_itab
 EXCEPTIONS
 generate_subpool_dir_full = 1
 OTHERS = 2.
 ASSIGN poi_itab->* TO <itab>. " <itab> is dynamic internal table
Might help u.
Thanks.
Edited by: Sap Fan on Sep 17, 2009 1:19 PM

Need help in Creating External Tables

Hi All,
I have a flat file containing numberic data, CLOB data, and also date columns data. I have to load this flat file data into staging server table using External tables. I have to write a stored procedure in such way creating exteranl tables dynamically. My question or need help from you people is that how to define the external table to load the CLOB data from flat file.
Thanks,
Sankar

The LOCATION clause of an external table specifies the file or files to be read when the table is queried. You can change it to refer to different files without dropping and recreating the table and invalidating all dependent code.
Regarding DBMS_SQL, yes you can do it the hard way if you prefer.
Good point about CLOB columns in external tables. Quite possibly they are not supported, but I would have to check the manuals and try some examples.

Need a logic for Internal table processing

Hi,
I have a requirement...an internal table contains three fields material no, bin no, and Quantity
Mat. No    |         Bin No        |              Quantity
a              |              x1         |                   10
a              |              x1         |                   10
a              |              x2         |                   20
b              |              x3         |                   10
c              |              x3         |                   20
c              |              x4         |                   30
c              |              x4         |                   40
In this I need to append the records to new internal table say itab1 where multiple entries exist for some material no like mat no 'a' and 'c' and
if the material no. exist only once in the table, it has to be moved to another new internal table say itab2.
Pls suggest some logic that does not have performance issues.
Thanks in advance
Saravana

Hi there,
a solution in brief...
data: wa_itab1_a like itab1,
         wa_itab2_b like itab1,
         lv_tabix       type sytabix.
sort itab1 by matnr.
loop at itab1.
wa_itab1_a = itab1.
at new matnr.
    lv_tabix = sy-tabix + 1.
    clear wa_itab2_b.
    READ TABLE itab1 into wa_itab2_b
                        INDEX lv_tabix.
    if wa_itab2_b-matnr ne wa_itab1_a-matnr.
      append wa_itab1_a to itab2.
      delete itab1 where matnr = wa_itab1_a-matnr.
    endif.
endat.
endloop.
Regards
George Zervas
Edited by: gzervas on Oct 20, 2010 12:08 PM

Need help reading an internal table

Similar Messages

Maybe you are looking for