Need help setting up my router

hi i am new to this forum and i need some help
i just recently bought a linksys  model: WRT54G ROUTER and a NETWORK USB ADAPTER and it wont connect to the internet using a wired connection and a wireless connection. i have COMCAST internet and i tryed calling them to see if they could help me but they couldnt. i also went to BEST BUY  and asked the geek squad people and they said the lnksys setup disk doesnt work 9/10 times so can any one please help me so i dont have to spend 100+ dollars to get my internet setup through my router.
also  my modem is directly connected to my comouter by a cat-5 cable(ethernet cable)
thanks in advance

Make sure you can access the Internet while directly connected to the modem then...
Check this out:
CLICK THIS
"The war between heaven and hell depends on the choices we make, and those choices require sacrifice. That's the test"

Similar Messages

  • I need Help Setting Up Wireless Router WRT54G on NTL

    Hi, I've managed to setup a few home wireless networks in my time but I'm having problems with this. My gf's ISP is NTL and it is connected via a cable modem (rather than the set top). I registered my laptop using the installation software and the internet connection is working fine. I attempted to setup the router and I could connect to it, however I could not connect to the internet through the router. Previously with other routers I found an option where you could input the user/pass so that the router was automatically connected to the service, but I could not find this option. Does anyone who has setup this wireless router with an NTL setup / or anyone at all have any idea how I go about setting it all up?
    Thanks in advance

    I also found this thread which helps by showing when to clone the MAC address.
    Using run cmd from XP's start menu and typing ipconfig /all will show the MAC address of your machine's NIC card, if you need it.  
    http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=1040&p_created=10869...

  • Need Help setting up wireless router

    Hi, ive spent the week on the phone trying to reach all the various technical support people to help me, and getting no where, i wait forever and then get dropped.
    I just got time warner cable in NYC (queens) and the modem and internet surfing works fine if I use a USB cable from the modem to my computer, the problem is the ethernet doesnt work, and I dont have drivers for ethernet, but im more interested in setting up wireless from the modem, to the wireless router to my computer with the wireless card.
    I accidently installed some kind of microsoft tcp/ip thingy when surfing around my computer trying to fix this and now I cant use the wireless router and card.
    I dont want to spend hours on the phone in a tech support message maze, so please help me thru PM.
    Mark
    please PM me
    (Edited for guideline compliance. Thanks!)
    Message Edited by JOHNDOE_06 on 07-15-2007 12:16 PM

    Hi Mark, first off let me know are you able to go online directly with the modem, if computer is connected directly to the ethernet port of modem? if not, i think ethernet port of the modem is not working or may be it's defective or drivers for ethernet adapter is not installed , as you've mentioned you can able to go online with the USB cable, once computer is connnected directly to the USB port of modem...unless and untill ethernet port on the modem is not working you won't be able to configure the wireless router... router doesn't have USB port on it... anyways connect modem to the ethernet port of the  router >> computer (wireless), reset the router back to factory default settings by pressing reset button on the back panel of the router... release the reset button after 30 seconds, power cycle the network by unplugging power cable of the modem and router... wait for couple of minutes and power up the modem first and wait for few seconds once modem is rebooted, after that power up the router, check the light status power, WLAN and internet light on the router should be on... try connecting to "linksys" wireless n/w from wireless pc...check whether it works or not and let me know...

  • Need help Setting up Multiple Static Ip , 1 for each port of the fios router

    Need help Setting up multiple Static Ip on my fios router
    I have been trying to figure out how to set up multiple ip in my fios router.
    However I kind of managed how to set up multiple static ip However the way I want it is for each port of my router to have an external ip signed to it. ( like 4 different modem in 1 )
    Verizon gave me 5 static ip but they can not help me how to set it up.
    Have anyone here done more then one static ip on different ports? I assume that the process will be the after the second static ip.

    You want to set up Static Nat. You will not assign the IP to a port, but rather to a local machine. Figure out what machines you want your IP's to go to. Under the firewall section you will see static nat. Pick the machine you want and enter one of the IP's you were assigned.

  • HOW TO?: Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

    Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

    Any devices connected to the same icloud account can sync all the data on that account.  For this reason an icloud account is really for a single user.
    On a mac, if each user has their own account, then the itunes for that mac account should be set up to connect to that user's icloud account (System preferences>icloud).

  • Need help setting up TV equiptment

    I have been very ill and I need help setting up my TV, DVR, Receiver, Surround sound systems. I'm afraid if I try to work on all the equiptment, I'll drop my HDTV or other componets because I'm still weak. Can anyone help me? I've called a few places and they want $100.00 to set it up. Give me a break! I know about inputs and outputs and other cables, I just don't have the strength to move the equiptment around. I am willing to pay. Please call me at 813-{edited for privacy}. Thanks, Teresa {edited for privacy}

    blondeinneed wrote:
    I have been very ill and I need help setting up my TV, DVR, Receiver, Surround sound systems. I'm afraid if I try to work on all the equiptment, I'll drop my HDTV or other componets because I'm still weak. Can anyone help me? I've called a few places and they want $100.00 to set it up. Give me a break! I know about inputs and outputs and other cables, I just don't have the strength to move the equiptment around. I am willing to pay. Please call me at 813-{edited for privacy}. Thanks, Teresa {edited for privacy}
    Teresa,
    I think the best way for someone to volunteer to help you would be for them to send you a Private Message (PM) here on the forums. You should see a small envelope in the upper right corner of the screen, when it changes color you will know you have a PM to view.
    I would be happy to help, but since I am in North Texas I don't think that is a viable option Sorry....
    Justin
    FiOS TV, Internet, and phone user
    QIP7232, QIP7100-P2, IMG 1.9A
    Keller, TX 76248

  • Need help setting up and configuring rsync

    Hello
    I need help setting up, or rather configuring rsync to sync data between my brand new iMac and my Macbook Air.
    Here is what I would like to:
    - I want all of the files on both machines to be an exact mirror or copy of each other. Basically I have an iMac for at home, and then a Macbook Air for the road.
    - The main folder on both Macs is called 'Sara' and I want the contents (mainly the 'movies' folder, 'music' folder, 'documents' folder and 'pictures' folder) to immediately sync up with each other when both of them are on my home network.
    - this means if I'm working on a file at home on my Macbook, it will immediately write to the same directory on my iMac and vice versa (if I'm working on file(s) on my iMac, it will immediately save the contents to my Macbook). This way, if I'm working on last minute project my iMac, and then have to head out the door to the airport, the file is immediately saved to my Macbook (no usb for USB transfer).
    - hopefully this makes sense??
    Any help is greatly appreciated!
    Thanks

    It's a lofty but unrealistic goal.  Rsync does not run automatically.  There is no realistic method of instantaneously synching two computers over the internet or even on a LAN.
    I would suggest you might try using Synk Pro which, in theory, can keep two devices in sync when they are both on the same network (and both have shared and mounted drives.)
    If you must do this with rsync then I suggest a Google search for rsync tutorials.

  • I need help setting up an apple id for my sons phone. It seems his email address has been taken and/or we cant get the password.

    I need help setting up an apple id for my son's phone. It seems his email address has been taken and/or we cant get the password.

    Two different things
    If you forgot the password
    If you forgot your Apple ID password - Apple Support
    If the email ID you want to use is in use by someone else - then you may need a new one
    The iCloud ID's are usually unique and may be of help if you set one up

  • Need help setting up FCE 4   PLEASE

    OK, I'm NOT a professional, just need help setting up.
    Just purchased FCE 4. Need to set up my Sony HDR SR11. I've already recorded most of my stuff in HD SP. Can someone Please help me set up?
    thanks

    Thanks for the info.
    I updated and did a search in my manual for Log and transfer which didn't go to anything I can figure out. Sorry, I don't have time to read 1152 pages.
    Can anyone just tell me how to get this going? There should be a simple set up correct?

  • My email is not working in lightroom. Need help setting that up.

    Need help setting up my email in lightroom. For some reason it's not connecting.

    Try posting in the Lightroom forum.  People there are more tuned in to the detail working of the application:
    http://forums.adobe.com/community/lightroom?view=discussions

  • I have a Steinberg MI4 and a Roland Fantom X7, and am trying to use my Fantom in Logic to record audio. Need help setting it all up using MIDI cables. Please help !

    I have a Steinberg MI4 and a Roland Fantom X7, and am trying to use my Fantom in Logic to record audio. Need help setting it all up using MIDI cables. Please help !

    Encryption wouldn't matter except for Wifi.
    While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
    Tiger Requirements...
    To use Mac OS X 10.4 Tiger, your Macintosh needs:
        * A PowerPC G3, G4, or G5 processor
        * Built-in FireWire
        * At least 256 MB of RAM (I recommend 1GB minimum)
        * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
        * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools  (I recommend 20GB minimum)
    http://support.apple.com/kb/HT1514
    http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
    See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
    https://discussions.apple.com/message/15305521#15305521
    Or Ali Brown's great info on where/how to find/get Tiger...
    http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
    As far as Memory, that's sort of easy, find your eMac here...
    http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
    As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
    http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/

  • Need help setting up outlook mail on ipad2

    downloaded the outlook app, need help setting it up.

    Is it actually called Outlook, or is it called Outlook Mail Pro or Outlook Mail Complete or something like that? Those apps are actually by separate companies (ie, not Microsoft), and I don't personally have experience with them, but here are links to their support sites which should have the information you need (or an email address you can write to):
    Outlook Mail Pro: http://support.codebeforedawn.com/customer/portal/topics/38871-outlook-mail-pro
    Outlook Mail Complete: http://www.ikonicapps.com/outlook/
    hope that helps...
    Matt

  • Deperately need help setting up external midi devices

    I need help setting up external midi devices.....Motu828...Midi express...RolandXV3080....Motif rack.......HELP

    Theres not really much to setup. Assuming your synths are connected to the MIDI Express already..
    In Logic, make a new MIDI track. On the left hand side in the track inspector, among the parameters you'll see an option for MIDI Port and Channel. Just pick which port the track is going to, set the channel and device id and play (And be glad you never had to deal with setting up the old Environment window in Logic 5 and below).
    If you really wanna get into it and have all your MIDI ports named after the synth thats connected to it, open up Audio Midi Setup, create a device icon for each synth you have and draw the cables from each device to whatever port its connected to on the midi interface's icon.
    Then in Logic everytime you pick your MIDI port on your track, instead of MIDI Port 1, MIDI Port 2, etc.,
    it would be labelled XV-3080, Motif Rack, and so on.. I dont think theres anyway to do this within Logic itself (you can change the labels on your audio ins and outs, but not MIDI as far as I can recall)..
    If youre talking about having access to patch names and whatnot like Digital Performer and Cubase let you do, Logic doesnt use the xml patch lists everyone else does. The above steps are pretty much all there is to be done as far as MIDI.
    Heres my Audio Midi Setup window for reference.
    Now when I select MIDI Port 1 in Logic its named MWXT, port 2 is SR-16, etc..

  • HT5538 I dont really get this i need help setting some things up on my Ipod.Can you help?

    I need help setting up my Imessage and FaceTime.I have tryed and its not working.

    iOS: Using FaceTime
    iOS: About Messages
    iOS: Troubleshooting FaceTime and iMessage activation
    iOS: Troubleshooting Messages
    iOS: Troubleshooting FaceTime

  • Need help setting up Remote Desktop Services

    This is my first server and I can't get Remote Desktop Services to work. I need to access my Server 2012 machine from my Windows 7 computer. I realize this is probably a trivial task for a server admin of any experience level, but I am utterly confused.
    When I try to access https://servername.domainname.local/RdWeb, the webpage is unavailable. When I replace .local with .com, same result. Only when I use https:192.168.1.***/RdWeb it connects.
    I log in and click an application. An rdp file is downloaded. I double-click the file. A warning message appears listing the URL of the remote computer (servername.domainname.local) and the gateway server (servername.domainname.com). When I log in from there,
    I get the following message:
    "Your computer can't connect to the remote computer because the Remote Desktop Gateway server address in unreachable or incorrect. Type a valid Remote Desktop Gateway server address."
    Any help is greatly appreciated.

    Hi,
    The ideal method for managing a server from a client computer is achieved by installing the RSAT tools (remote server administration tools).
    http://www.microsoft.com/en-us/download/details.aspx?id=39296
    What these tools do is to actually install Server Manager on your client computer. However, you will need a Windows 8.1 computer to install the tools in the link above. They won't install on Windows 7. Note: The RSAT tools are available for Windows 7 but
    you can only manage 2008 R2 and earlier with that version of RSAT. The RSAT tools are sync'd with the release of client and server versions.
    RSAT does need a direct connection between the client and the server (as far as I know), so you can't manage your intranet server from the public Internet this way unless the server has a public IP address or - more ideally you have a VPN server set up to
    access your internal network.
    As Tim mentions, you can configure routers with 'port forwarding' to connect via RDP from outside your private network to the inside. If you log into the router you should see this option but it does require some understanding of what you are doing.
    In this case, you would need to connect to the router's external (public) IP address. You should be careful however enabling access into your private LAN from the outside as this does open you up to some security risks.
    Another option for you is to use a 3rd party solution such as logmein or teamviewer although in my opinion these are less than ideal methods.
    -Greg

Maybe you are looking for