Need Help w/CF Builder Config

I admit I am a Homesite guy but I'm really trying to give CF Builder a fair shake. Unfortunately, I can't even get off the ground with it. I have tried every combination of settings I can think of but I cannot 'Browse' (in Homesite lingo) a CF template with IE or Firefox from within builder.
My CF8 server is another machine on my network. Builder is talking to it - I can use the services browser and such. Just can't browse (preview) my web pages. In Homesite my mappings look like this:
Homesite Path: N:\inetpub\wwwroot
Server path: C:\inetpub\wwwroot
Browser path: http://web1/
ColdFusion is installed in C:\coldfusion8 on the server, which would be N:\coldfusion8 on my workstation. Not sure if that matters or not since Homesite doesn't care...
Using IIS. Port 80
How can I translate this into Builder? This can't be that hard but I've been beating my head against the wall!
Thanks!

Can you browse to the site using an external browser using the URL you are giving to CFB?
Also, it might be good to ask these questions on the CFB forum - http://forums.adobe.com/community/labs/coldfusionbuilder - because the CFB dev team monitor that one.
To be honest, the internal browser in CFB has never worked for me, because it balks at the fact that my project files are in a different location to my source code (which makes sense, because a CFB project has nothing to do with the source code of my app, so why would they be in the same place?), which is something I have raised with the CFB dev team but not had any feedback about.
I just use an external browser.
But, anyway, I reckon if you repeat your question on the CFB forum, the guys there will help you out.
(Sorry, would have mentioned this last time round, but didn't notice you weren't already posting it there... I get email from all the forums into one mailbox)
Adam

Similar Messages

Need help for flash builder

i need help for flash builder 4 and papervison 3d. I need to create a slider with it ranges of value from 10 to 50 to adjust the camera values for the camera.fov and also need to create it for the yaw of the object from 0 to 360. I try to look for any slider event and classes in this program but cant find any, btw, i need to use the AS only project file.
here is my codes:
can you please tell me how i should modify the codes?
package
    import flash.display.BitmapData;
    import flash.display.Sprite;
    import flash.events.Event;
    import org.papervision3d.materials.BitmapFileMaterial;
    import org.papervision3d.materials.BitmapMaterial;
    import org.papervision3d.objects.primitives.Sphere;
    import org.papervision3d.view.BasicView;
    [SWF (width="800", height="600", backgroundColor="0x000000",frameRate="30")]
    public class EarthBitmap extends BasicView
        private var sphere:Sphere;
        public function EarthBitmap()
            super(800 , 600);
            var earthmaterial:BitmapFileMaterial = new BitmapFileMaterial("../assets/Earth.jpg");
            sphere = new Sphere(earthmaterial,100,20,18);
            camera.fov = 25;
            scene.addChild(sphere);
            addEventListener(Event.ENTER_FRAME,rotateSphere);
        public function rotateSphere(evt:Event):void
            sphere.yaw(0.2);
            singleRender();

Turn the click handler into a full on separate function. Then store all the views in an array and use Math.rand() to randomly choose one.
Something like this:
<fx:Script>
     <![CDATA[
          var questionsArray:Array = {question2,question3,question5,questionRed,questionGeography};
          function buttonClickHandler(event:MouseEvent){
               var randomProblem:int = Math.floor(Math.random()*(questionsArray.length));     //generates a random integer between 0 and the total number of questions in the array (arrays are 0-based)
               navigator.pushView(questionsArray[randomProblem]);
     ]]>
</fx:Script>
<s:Button id="randomProblemButton" label="Next Problem" click="buttonClickHandler(event)" />
Haven't tested that, but something along that line should work

Need help with PC build for use with Photoshop CS4 Extended - Have I made the right choices?

Hello,
I'm very new to the inner workings of a PC...this will be first time building one from scratch. I know enough to be dangerous but not enough to be confident. I will use the PC primarily for editing, secondarily for iTunes management. I've heard that I should have, at the very least, an SSD for PS, other apps and the O/S. I'll also have a hard drive for data storage. Do I need yet another SSD for scratch? If so, any recs for one? Also, my current build (which does not include any SSDs) is about $800. What can I skinny down, without sacrificing a huge amount of speed/performance? I am looking for major guidance here...I'm ready to order, but I keep second-guessing my choices. I want to make sure I get this right the first time around. I want this machine to last me a good long while. Any help at all will be HUGELY appreciated!
Here are my current picks:
Part list permalink: http://pcpartpicker.com/p/1bwi
Part price breakdown by merchant: http://pcpartpicker.com/p/1bwi/by_merchant
CPU: Intel Core i5-2500K 3.3GHz Quad-Core Processor ($214.99 @ SuperBiiz)
Motherboard: Gigabyte GA-P67A-D3-B3 ATX LGA1155 Motherboard ($104.99 @ Newegg)
Memory: G.Skill Ripjaws Series 16GB (4 x 4GB) DDR3-1333 Memory ($85.00 @ Newegg)
Hard Drive: Samsung Spinpoint F3 1TB 3.5" 7200RPM Internal Hard Drive ($49.99 @ Newegg)
Video Card: XFX Radeon HD 6850 1GB Video Card ($129.99 @ Newegg)
Case: Cooler Master Elite ATX Mid Tower Case ($60.00 @ Amazon)
Power Supply: Corsair 500W ATX12V Power Supply ($49.99 @ Newegg)
Optical Drive: Lite-On iHAS124-04 DVD/CD Writer ($19.99 @ SuperBiiz)
Operating System: Microsoft Windows 7 Home Premium SP1 (64-bit) ($91.98 @ Amazon)
Total: $806.92
(Prices include shipping and discounts when available.)
(Generated 2011-09-19 18:29 EDT-0400)
Thanks!
Andrea

Make sure the motherboard is the third revision as the earlier two had problems with the i5-2500K (Sandy Bridge)
I prefer Asus motherboards but doesn't mean the Gigabyte is a problem. (I note that it scored 4 eggs...)
May not make a difference in Photoshop but for Premiere the Geforce video cards with GDDR5 are preferred.
The LiteOn iHas 224 does lightscribe which is a nice touch for clients/gifts.
There is no room to save as I would consider your build minimum specs for a nice photoshop experience.
As for SSD drives...my research of reviews and articles makes me feel the technology is not ready for mission critical work. So if you are running a business then I recommend not using SSD drives. Rather look at Raptor 10,000 rpm drive for Windows and Photoshop and use the Spinpoint for storage. If not business then I've read the intel x25 SSD drives are solid but I have no personal experience with them.
Cheers,
Steve

Need help with expression builder issue

Hi all
I'm hoping someone can help with an issue I'm having. I'm creating a database for a manufacturing joinery. For 1 of my forms, Ive to create a despatch form which includes order details along with customer details. Some customers can have contracts in which
they get a fixed price on certain item. This is where the problem lies.
For my customers table, I have a field called "On contract" which is a Yes/No field. I've created a query to attempt to make this form. I'm having trouble with adding a total column at the end of this query. Quantity,Unit Price, Contract Price
are also in the query. I've been trying to build an expression to say like;
iif [on contract] = "Yes", [Quantity] * [Contract Price]
iif [on contract] = "no", [Quantity] * [Unit Price]
It obviously wont work, what am I doing wrong?
Thanks in advance

Hi,
Assuming you are using the database is SQL Server:
SELECT [CustomerID]
,[Quantity]
,[Unit Price]
,[Contract Price]
,[Total] = CASE WHEN [On Contract] = 'Yes' THEN [Quantity] * [Contract Price]
WHEN [On Contract] = 'No' THEN [Quantity] * [Unit Price] END
FROM [Customers]
Modify the SQL to suit your need.
Hope this helps.
~J.

Error message "VI is not executable"! Need help with Application Builder

Hello,
I have a problem with an application, built with the Application Builder. I have read some threads about the problem I have, but I still don't know a solution.
When I run my front panel from LabVIEW, everything is good. So, now I created an application (and an installer) to be able to run it on other PCs as well. This application does not work. Everytime I start it on my PC, I get the error "VI is not executable. ...". I read in several forums solutions for this error, but I cannot fix it! I've changed my properties for the builder, but with no success. Perhaps, anybody has more ideas, what's the problem.
To get a better idea from my project, here a little description of it:
In the block diagram there is a while loop which is continuously runned. In this loop I only set some properties for the layout of the front panel, such as decorations which will be hidden/shown and changes of colours of indicators... For the rest, it waits for a click on the button "Start" in the front panel. After that, a DLL is called to communicate with a USB device. Some measurements are carried out and the DLL is closed. I hope, you can get a global idea from my block diagram...
I use LabVIEW 8.5, the DLL is a third-party DLL, which we wrote on our own. But I think the DLL works properly, if it is called from a C# application it works and it works, too, by calling it from LabVIEW when I am in development mode.
It's a project for university and I'm just a beginner in LabVIEW, so I don't have so much experiences in it, but I think i improved my knowlegde about LabVIEW very well in the last weeks!
So, i hope to get an answer soon (the deadline for the project is not soooo far away )
If you need more information, please let it know...
I would be very grateful if there is someone with a working solution...
Kind regards from the Netherlands,
Sebastian

Sebastian,
Your architecture makes it very difficult to debug this and other problems. Does the error message mention which VI is causing the problem? It is very important to wire your error clusters everywhere. In LabVIEW, when a node throws an error (Error.Status = T), future nodes do not execute. At the end, place an error cluster indicator that you can see on your front panel. When an error posts, you can right click the indicator (even in a compiled application) and select "Explain Error".
This is a start, but you really need to push this into a queued-state machine before this gets any more complicated. As it were, if anything in your loop hangs, your whole application hangs. See attached for a queued-message handler (not advisable for actual applications, but you get the point. You would want to have a type defined enum in lieu of strings, and shared data between states differently, etc.)
-Jason
Message Edited by LabBEAN on 01-20-2009 08:36 AM
Certified LabVIEW Architect
Wait for Flag / Set Flag
Separate Views from Implementation for Strict Type Defs
Attachments:
State Machine.vi ‏18 KB

Need help getting simple Nat config to work

I can't seem to get the below Nat config to work. I removed the crypto from the fa0/0 for testing.
Why can't i get xlates when I ping 192.168.1.5 or 192.168.1.1? As you can see my access list isnt getting touched?
What am i missing?????
==============================================
CCC#sh access-lists
Standard IP access list 1
10 permit 10.10.10.0, wildcard bits 0.0.0.255
==============================================
CCC#sh ip nat t
CCC#
==============================================
CCC#sh ip nat s
Total active translations: 0 (0 static, 0 dynamic; 0 extended)
Outside interfaces:
FastEthernet0/0
Inside interfaces:
FastEthernet0/1
Hits: 0 Misses: 0
CEF Translated packets: 0, CEF Punted packets: 0
Expired translations: 0
Dynamic mappings:
-- Outside Destination
[Id: 2] access-list 1 interface FastEthernet0/0 refcount 0
[0] prot 6: port #7 refcount 1 syscount 1 localport 4294967295, localaddr 0.0.0.
0, flags 1
[0] prot 6: port #9 refcount 1 syscount 1 localport 4294967295, localaddr 0.0.0.
0, flags 1
[0] prot 6: port #11 refcount 1 syscount 1 localport 4294967295, localaddr 0.0.0
.0, flags 1
[0] prot 6: port #13 refcount 1 syscount 1 localport 4294967295, localaddr 0.0.0
.0, flags 1
[0] prot 6: port #19 refcount 1 syscount 1 localport 4294967295, localaddr 0.0.0
.0, flags 1
[0] prot 6: port #21 refcount 1 syscount 1 localport 4294967295, localaddr 0.0.0
.0, flags 1
=============================================================================
CCC#sh run
Building configuration...
Current configuration : 1490 bytes
version 12.4
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
hostname CCC
boot-start-marker
boot system flash c2600-adventerprisek9-mz.124-25d.bin
boot-end-marker
no aaa new-model
no network-clock-participate slot 1
no network-clock-participate wic 0
ip cef
no ip domain lookup
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
archive
log config
hidekeys
crypto isakmp policy 2
encr 3des
hash md5
authentication pre-share
group 2
lifetime 400
crypto isakmp key cisco123 address 1.1.1.3
crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des
crypto map Petaluma_1 1 ipsec-isakmp
! Incomplete
set peer 1.1.1.3
set transform-set Petaluma_VPN
match address 100
interface FastEthernet0/0
ip address 1.1.1.2 255.255.255.0
ip nat outside
ip virtual-reassembly
speed auto
half-duplex
interface Serial0/0
no ip address
shutdown
clock rate 56000
interface FastEthernet0/1
ip address 10.10.10.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
router rip
network 1.0.0.0
network 10.0.0.0
no ip forward-protocol nd
ip route 192.168.1.0 255.255.255.0 1.1.1.3
no ip http server
no ip http secure-server
ip nat source list 1 interface FastEthernet0/0 overload
access-list 1 permit 10.10.10.0 0.0.0.255
control-plane
line con 0
line aux 0
line vty 0 4
login
end

I am getting same issure:
Dynamic mappings:
-- Outside Destination
[Id: 1] access-list NAT interface FastEthernet0/0 refcount 0
[0] prot 6: port #0 refcount 2 syscount 2 localport 4294967295, localaddr 0.0.0.
0, flags 1
[0] prot 6: port #7 refcount 1 syscount 1 localport 4294967295, localaddr 0.0.0.
0, flags 1 Dynamic mappings:
-- Outside Destination
[Id: 1] access-list NAT interface FastEthernet0/0 refcount 0
[0] prot 6: port #0 refcount 2 syscount 2 localport 4294967295, localaddr 0.0.0.
0, flags 1
[0] prot 6: port #7 refcount 1 syscount 1 localport 4294967295, localaddr 0.0.0.
0, flags 1
I don't know what this means and will try debug ip nat and get a readout.

Need help with pc build choice!

Hi, Everyone,
I have two questions actually. I want to re build my tower and i am looking at this option.
MSI- 990FXA-GD80 AMD 9 series mother board AM3+ ATX
CPU- FX-8120 processor- eight core
Gpu's- Evga super clocked GeForce GTX 560 Ti 1 GB GDDR5 X2
Ram- Corsair XMS3 8 GB DDR3 Ram 1600Mhz (2X4GB)X2
PSU- ThermalTake TR2 RX 850 watt ATX
HHD- 1 Corsair 11GB SSD, 2 1 TB HDD
Optical drives- 1- Lite -On 12x Blue ray writer 1- DVD Rw+
Fans- 2 x 140 LEDS mm, 3 120 mm LEDs
15-1 all in one smart card reader
case- Cooler Master Scout
Keyboard- LogicTech G15 Gaming keyboard
mouse- Microsoft 3000 laser
Monitor- Gateway 23" LCD 1080p HD
speakers- LogicTech Z506 5.1 surround sound HD
O.S- Windows 7 service pack 2
Ok second question is.. is 850 Watt good enough for the gpu setup and all around tower setup?
--Current build---
Asus- 880G M4A88TD V - EVO usb 3.0 ATX
PSU- ThermalTake TR2 650 Watt ATX
RAM- Corsair 8 GB 1600 Mhz ( 2X4GB)
CPU- AMD Phenom II X4 Black edtion 955 SE
GPU- CrossFire X 5770s 1 GB GDDR5 Ram
HHD- Dual 1 TB Western digtial Green drives, and one external 1 TB Western Ditgial
Optical drives- 2x- DVD Rw+, and 1 15-1 All in one card reader
Keyboard- G15 Gaming keyboard
mouse-Microsoft 3000 lazer
Monitor- Gateway HD 1080p 23" LCD
Speakers- z506 logictech 5.1 surround sound HD
O.S- Windows 7 Service pack 2
Any help would be greatly helpful.
thanks again

Make sure the motherboard is the third revision as the earlier two had problems with the i5-2500K (Sandy Bridge)
I prefer Asus motherboards but doesn't mean the Gigabyte is a problem. (I note that it scored 4 eggs...)
May not make a difference in Photoshop but for Premiere the Geforce video cards with GDDR5 are preferred.
The LiteOn iHas 224 does lightscribe which is a nice touch for clients/gifts.
There is no room to save as I would consider your build minimum specs for a nice photoshop experience.
As for SSD drives...my research of reviews and articles makes me feel the technology is not ready for mission critical work. So if you are running a business then I recommend not using SSD drives. Rather look at Raptor 10,000 rpm drive for Windows and Photoshop and use the Spinpoint for storage. If not business then I've read the intel x25 SSD drives are solid but I have no personal experience with them.
Cheers,
Steve

Need help with new build. Possible gpu problem?

MSI 970a-g45 board. This is my second build with the same board, but i am using a different GPU this time and i am unable to get the signal to the monitor. my psu is an OCZ ModXStream Pro Power Supply - 500-Watt and the specs are as follows. Wattage    500W
SLI/Crossfire    SLI Ready
Energy Efficiency    80 PLUS
Fan    140 mm
+3.3V    25 A
+5V    25 A
+12V 1    18 A
+12V 2    18 A
-12V    0.3 A
+5VSB    2.5 A
my gpu is an MSI N440GT-MD1GD3/LP
RAM corsair Vengeance 1600mhz 8 gigs
cpu AMD fx 4100 3.6 ghz, quad core
the only difference in this build from my last is the gpu. so its making me think something wrong with it..
Any help would be greatly appreciated.

do you have access to your 1st PC to swap parts for tests?

Need Help: ADAWS install, setup, config

Under the 5.0.2 install guide of ADAWS, editing the Web.Config section, supossedly there is an object DirectoryServices.dll. In our box where ADAWS is installed I do not see this object at all, I have search for it but do not see instance of it on this box. Anyone know where I can find this object.
I am about to go to the step of editing the Web.Config and uncomment the line with section name = "system.directoryservices". I am also at that part to supply the PublicKeyToken value (run sn.exe -T system.directoryservices.dll), but I cannot find the sn.exe either.
Can someone help me out.
Ray Salgado

OK I ran this newly created authentication import and sync job but failing and getting these errors:
9/20/04 14:17:33- Starting to run operations (1 total) for job 'NETMDDEV AUTH IMPORT/SYNC JOB (TEST) - Run Once'. Will stop on errors. (PID=2144)9/20/04 14:17:33- *** Job Operation #1 of 1: Authentication source (for synching users and groups) 'NETMDDMEV SYNC SOURCE (TEST)' [Run as owner 'rsalgado_dev']9/20/04 14:17:33- Creating the Everyone In Auth Source group (if one doesn't already exist).9/20/04 14:17:33- **********************************************************************************9/20/04 14:17:33- Sync Agent is processing groups.9/20/04 14:17:34- Authentication Synchronization Job's call to retrieve the groups on this auth source failed. Please check that the authentication source server is online.*** COM exception was: IDispatch error #19876 (0x80044fa4): [SOAP fault: faultcode='soap:Server' faultstring='Server was unable to process request. --> Object reference not set to an instance of an object. error setting up group query: GetGroupsInternal Error in GetGroups']9/20/04 14:17:34- *** Job Operation #1 failed: ProcessGroups failed (0x4)9/20/04 14:17:34- Done with job operations.
You guys have any ideas on what is going on here???
Please excuse my newbiness on this as I have not setup/configured/ran an AD authentication import and sync job before... Please let me know if I am doing setup / config of any releveant elements wrong...
Ray Salgado

Need Help With New Build, Please

Ok, built a new PC. Here are the parts:
MSI K8N Neo4 Platinum
XFX Geforce 6800GT
Seagate 160 Gig w/ NCQ
1 Gig (512x2) Corsair value memory 3200
PC Power and Cooling 470 Watt Silencer w/ Y PCI-express adapter
Athlon 3500+ (Clawhammer, says Newegg)
Lian-Li V-1100 (black)
My problem: 99.7% sure all cables are connected properly.
All lights and fans come on, drives open and close, but no video signal.
D-Bracket indicates the boot sequence is stuck on "processor initialization".
Things I've tried:
Swapped out the motherboard for an Asus A8N-SLI, same problem.
Reset CMOS on both: same problem, obviously not a motherboard issue.
Built w/ just CPU, GPU, and Memory on a towel, not a grounding issue.
Tried swapping out DIMMS one at a time in primary slot, same problem with both.
Yes, both 24-pin connectors and 12v 4-pin connector are hooked up.
Where I am now:
It's not the motherboard, or memory (unless both DIMMS are bad).
Based on the D-bracket LEDs, I assume it was the processor. I've sent the processor back to Newegg for a new one.
If that's not it, that leaves the PSU, the GPU, and/or the way I've got the y-adapter running to the GPU via two molex.
If the processor comes back and it doesn't work, I'll probably buy a cheap PCI card from newegg to see if it's a GPU problem. And/or I'll try a new PSU with a native 6-pin PCI-Express power connector.
Does anyone see any common compatibility problems with the K8N Neo4 Platinum and the parts I've selected, and/or does anyone have any other suggestions?
It's very depressing to have all this gear sitting around and be unable to power up Half-Life 2. :( Any help would be appreciated.

Quote from: tdho on 19-April-05, 05:06:22
Most likely RAM is your problem. Reset bios and try new memory.
Tom
Possible, but as mentioned, the LED bracket indicates it makes it completely through POST without the video-card, and I've tried alternating each DIMM, one at a time, in the primary slot. Unless both sticks are bad (wonder what the statistical chance of that is), it's not memory.
Though I'll try swapping out both as a last resort if the GPU switch doesn't work.

Need help reapplying a RAID0 config, without initializing

Hi Evevyone,
First time here, I apologize if I haven't posted in the good section. Though I'm sure the only people who can answer are here.
I'm using a MacPro with an AppleRaid card, using a RAID0. I do know the implications of using a RAID0 and I do understand that losing a drive results in having to rebuild the RAID from scratch.
However, I'm facing a different problem. I got an error from the RAID Utility, saying that 1 of my drives dissappeared, and got removed. This is impossible, as I was next to the machine when it happened, and I'm 100% sure I never removed a drive.
Inside the RAID Utility, All my drives are shown as good, but the RAID stripe is showing "failing" with 1 drive missing.
So, I was looking for a way to use the terminal, to force my drive to be part of the RAID stripe, without initializing it. OR, to recreate the array from scratch, without initializing it.
It can work, or fail, I just want to be sure I tried everything I could, as so far, the drive doesn't look bad... it looks like it's a configuration problem on the card.
Thanks!
Djieff Mute City

Do you have a dial peer now that sends all incoming calls to Callmanager? If so, just configure a translation pattern in Callmanager to translate the called number to the Unity pilot number. If you have other numbers in place, you can look at the config for these numbers. Another possibility is translating the number at the gateway using a translation rule.
Brandon

Need Help on using Forge Config Manager and CAS. Questions listed in the content below

Hi All,
I have an existing Endeca pipeline implementation where we read the data sets (Product Catalog Information) from Oracle database using JDBC adapters. The data set undergoes a series of manipulation until it gets indexed to the Endeca system. We make use of PCI for dimensions and dimension values. However, we now want to extend PCI to also include the Product catalog information. The current implementation also does not make use of CAS adapters to consume the dimensions data in PCI. The next consideration is to implement PCI as close to Out of the Box provisions and standardize it. Therefore we are also considering to implement CAS.
The questions are as below:
1. What are the ideal parameters that should support the use of PCI implementation (Dataset + dimension + precedence Rules + schema information) ? Note: We DO NOT have any product catalog system (like ATG) between database and Endeca.
2. Considering that we do not have any product catalog system to organize and maintain data, how feasible is it to read directly from database through CAS Adapters and process the data ?
3. We also plan to introduce partial update pipeline in future releases. Keeping that in mind should CAS based approach help us to read from a record store at the time of partial updates ?
4.in case we are limiting to a business case of implementing partial updates in the above explained existing design, should a custom CAS approach be a better design ? Custom CAS approach = writing the baseline output data to record store and later referring it at the time of partial updates.
5. Will CAS based approach help to reduce the baseline timings ?
6. What is the best way to export data to record store instance in the above design ? (Record store API / Command line utility / CAS crawl)
Thanks,
Nitin

Hi Neeraj,
You cam use both PI SLD and Solman Local SLD for LMDB synchronization. Now here you make to make sure that correct ranks are assigned to PI and Solman SLD. With the help of multiple sld, you can remove the cause of concern. Local SLD should always be of solman.
For CR content. that you can do for solution manager system in a click.
Divyanshu

I NEED HELP using Site Builder for adding sound to my personal webspace ~~ getting error!!

I am trying to add a sound .wav file to my personal webspace and keep getting this error.
Even tried converting it to a .mp3 file and still got this error. Anyone know a solution?

If it did work then we know that there's nothing wrong with the site support for mp3 files. The problem is with how Itunes ripped the CD then if the website wasn't even accepting the .wav file it created. Try using another program to rip the CD. If you have a windows computer, you can use Windows Media Player to do the ripping. See if that works for you.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

I need help with smart builds.

*1st thing I want to do:*
Show a big picture, then have it shrink and move to the bottom left corner at the same time
*2nd thing I want to do*
Show a large picture of a house, then zoom in to the truss of that house, while the masking region stays the same. then have that picture shrink to the bottom left like the first example.
Is it possible to do this? Please help

I'm trying to do something similar, where I zoom and move an image, but I want the mask to remain fixed. Right now all I can seem to do is zoom and move the whole image, including the mask.
Were you able to fix the mask?

Need help on FI/CO config

Hi,
Is anyone working with energy company...if so pleeeease let me know the procedures for configuring FI/CO module.
Thanks
van1276

Hi
These are very good sites for interview mat,
http://www.allinterview.com/showanswers/56726.html
http://techpreparation.com/computer-interview-questions/sap-modules-interview-questions2.htm
http://www.surya-padhi.net/fico/fico_index.htm
http://sap.ittoolbox.com/groups/career/sap-career/fico-interview-questions-1498679
Hope it helps
Regards
Jyostna

Need Help w/CF Builder Config

Similar Messages

Maybe you are looking for