Need Help while Creating Customized Cubes
while creating customized cubes i have some problem. please clarify this.
i have 10 Characteristics and 5 KF's.
while creating IC assign the characteristics to the dimension.
is there any proposed rule for assinging the char to dimension or i can assign randomly.
regards
magesh
Hi magesh,
You should assign related characteristics to the same dimension.
Ex: salesregion, sales off and sales rep to the same dimension say " sales".
I.e., when the characteristics have some relationship like <b>one to many</b> you should assign them in the same dimension.
Take an ex of customerid and prodid..they have many to many relationship.In such case go for separate dimensions.
And if the characteristic is of type salesorder which has many distinct entries in fact table, go for line item dimensions.
<b>Note:</b> In line item dimension, you can include only one characteristic.
Hope its helpful
Shylaja.
Similar Messages
-
Need help in creating custom reports
hello,
I am using EM 10.2.0.2 on windows 32-bit.
All EM components are installed on a single machine.
Have installed AGENT 10.1.0.5 for managing targets which are on LINUX 2.1
Please help me in getting the solution for the following queries:
(a)I need to create a custom report regarding the CAPACITY MANAGEMENT .
(b)I have some UDM defined but I am not able to use these UDM while creating custom report.
(c)Also is there any possibility that we can use views other than REPOSITORY VIEWS. What I meant was : instead of using REPOSITORY VIEWS can we use the tables of the target instances.
Thanks in advance.Same post
Need help on repository views for creating custom capacity planning reports -
Need help in creating custom crosstab reports
Hello
I need some help in creating custom crosstab reports.
My current report shows the number of events that have occured over the time in a day
The events and the eventdetails are read from the database before being printed on the crosstab
i.e something like this.
Note : there are no events between 3:00-3:59,5:00-5:59;6:00-6:59,7:00-7:59 (not present in the database)
hence not displayed in the reports
*08/07/2009* 01:00 02:00 04:00 08:00 10:00*
Event X 1 1 4 1 3
Event Y 3 3 2 2 1
Total 4 4 6 3 4
So far so good...
Now i have to enhance my reporting application to include the event details which have not happened i.e to include the time details in the crosstab reports where no events have happened
08/07/2009 01:00 02:00 03:00 04:00 05:00 6:00 07:00 8:00 9:00 10:00
Event X 1 1 0 4 0 4 0 1 0 3
Event Y 3 3 0 2 0 2 0 2 0 1
Total 4 4 0 6 0 6 0 3 0 4
I have fell short of ideas this time around to implement such a thing
Any help in this direction is deeply appreciated
Regards
Srivatsa
Edited by: Srivatsa HG on Jul 8, 2009 10:56 AMHi,
It seems that you are having issue with Crystal Report Design.
Post your question in [Crystal Report Design Forum|SAP Crystal Reports;
That forum is monitored by qualified technicians and you will get a faster response there. Also, all Design queries remain in one place and thus can be easily searched in one place.
Regards,
Shweta -
Need help with creating custom form
hi all,
i'm working on creating a new form. it has 2 blocks for 2 tables. headers and lines tables. the headers table mostly have columns that are id's from other tables. i.e. customer_id, location_id etc.. in my screen, obviously i would not show the id's. i'll display the descriptions / names of the id's instead like customer_name for customer_id... but in order to do this i created a table that joins more than 2 tables. so in the block query data source name, i enter the name of this view.. then i add a ON-INSERT, ON-UPDATE, ON-DELETE triggers at block level and i call the corresponding package which does the insert, update and delete. i'm able to insert but update and delete causes a problem. "ORA-01445: cannot select ROWID from, or sample, a join.. ".. i'm thinking the reason is that when the form does an update or delete, it locks the record which causes the error.. also the reason i need the view is because i need to be able to query the customer_name in the screen instead of the customer_id... what i can't figure out is how i can make this work... or a work-around may be...
can anyone help.
thanksMatt Rasmussen wrote:
You're right that the form is locking the record so you just need to control how it locks the record with an on-lock trigger. From the Oracle Applications Developer's Guide:
page 3-9:
When basing a block on a view, you must code ON–INSERT, ON–UPDATE, ON–DELETE, and ON–LOCK triggers to insert, update, delete, and lock the root table instead of the view.
Most of the on-lock triggers I have written follow this template:
<pre> SELECT field1, field2, field3
INTO :block.field3, :block.field2, :block.field3
FROM view
WHERE rowid = :block.row_id
FOR UPDATE OF field1, field2, field3;</pre>
I think once you've added this trigger, your form will work the way you want it.hi,
i tried your suggestion but still get the same error.. anyways, here are the details of what i have so far.
here's my table.
CREATE TABLE XXPN_VR_VOL_HEADERS_ALL
VOL_HEADER_ID NUMBER,
CUSTOMER_ID NUMBER,
LEASE_ID NUMBER,
LOCATION_ID NUMBER,
VAR_RENT_ID NUMBER,
PERIOD_SET_NAME VARCHAR2(15 BYTE),
PERIOD_NAME VARCHAR2(15 BYTE),
IMPORT_FLAG VARCHAR2(1 BYTE),
IMPORT_DATE DATE,
CALC_TYPE VARCHAR2(30 BYTE),
PASSTHROUGH_FLAG VARCHAR2(1 BYTE),
COMMENTS VARCHAR2(2000 BYTE),
CREATED_BY NUMBER,
CREATION_DATE DATE,
LAST_UPDATED_BY NUMBER,
LAST_UPDATE_DATE DATE
);here's my view.
create or replace view xxpn_vr_vol_headers_v ( row_id
,vol_header_id
,customer_id
,customer_name
,lease_id
,lease_name
,lease_number
,location_id
,location_code
,var_rent_id
,var_rent_number
,period_set_name
,period_name
,import_flag
,import_date
,calc_type
,passthrough_flag
,created_by
,creation_date
,comments
,last_updated_by
,last_update_date )
as
select xvvha.rowid
,xvvha.vol_header_id
,xvvha.customer_id
,hp.party_name
,xvvha.lease_id
,pl.name
,pl.lease_num
,xvvha.location_id
,loc.location_code
,xvvha.var_rent_id
,pvr.rent_num
,xvvha.period_set_name
,xvvha.period_name
,xvvha.import_flag
,xvvha.import_date
,xvvha.calc_type
,xvvha.passthrough_flag
,xvvha.created_by
,xvvha.creation_date
,xvvha.comments
,xvvha.last_updated_by
,xvvha.last_update_date
from xxpn_vr_vol_headers_all xvvha
,hz_parties hp
,pn_leases_all pl
,pn_locations_all loc
,pn_var_rents_v pvr
where -1 = -1
and xvvha.customer_id = hp.party_id (+)
and xvvha.lease_id = pl.lease_id (+)
and xvvha.location_id = loc.location_id (+)
and xvvha.var_rent_id = pvr.var_rent_id (+);here's my ON-UPDATE trigger block level
begin
xxpn_vr_vol_data_pkg.update_vr_vol_hdr_data ( p_vol_header_id => :XXPNVRVOLHDRS.vol_header_id
,p_customer_id => :XXPNVRVOLHDRS.customer_id
,p_lease_id => :XXPNVRVOLHDRS.lease_id
,p_location_id => :XXPNVRVOLHDRS.location_id
,p_var_rent_id => :XXPNVRVOLHDRS.var_rent_id
,p_period_set_name => :XXPNVRVOLHDRS.period_set_name
,p_period_name => :XXPNVRVOLHDRS.period_name
,p_import_flag => :XXPNVRVOLHDRS.import_flag
,p_passthrough_flag => :XXPNVRVOLHDRS.passthrough_flag
,p_comments => :XXPNVRVOLHDRS.comments
,x_last_updated_by => :XXPNVRVOLHDRS.last_updated_by
,x_last_update_date => :XXPNVRVOLHDRS.last_update_date );
end;here's my code in ON-LOCK trigger block level
begin
select lease_id
,lease_name
,lease_number
,location_id
,location_code
,customer_id
,customer_name
,var_rent_id
,var_rent_number
,period_name
,comments
,period_set_name
,import_flag
,passthrough_flag
,created_by
,creation_date
,last_updated_by
,last_update_date
into :XXPNVRVOLHDRS.lease_id
,:XXPNVRVOLHDRS.lease_name
,:XXPNVRVOLHDRS.lease_number
,:XXPNVRVOLHDRS.location_id
,:XXPNVRVOLHDRS.location_code
,:XXPNVRVOLHDRS.customer_id
,:XXPNVRVOLHDRS.customer_name
,:XXPNVRVOLHDRS.var_rent_id
,:XXPNVRVOLHDRS.var_rent_number
,:XXPNVRVOLHDRS.period_name
,:XXPNVRVOLHDRS.comments
,:XXPNVRVOLHDRS.period_set_name
,:XXPNVRVOLHDRS.import_flag
,:XXPNVRVOLHDRS.passthrough_flag
,:XXPNVRVOLHDRS.created_by
,:XXPNVRVOLHDRS.creation_date
,:XXPNVRVOLHDRS.last_updated_by
,:XXPNVRVOLHDRS.last_update_date
from xxpn_vr_vol_headers_v
where rowid = :XXPNVRVOLHDRS.ROW_ID
for update of lease_id
,lease_name
,lease_number
,location_id
,location_code
,customer_id
,customer_name
,var_rent_id
,var_rent_number
,period_name
,comments
,period_set_name
,import_flag
,passthrough_flag
,created_by
,creation_date
,last_updated_by
,last_update_date;
end;properties for the block
Query Data Source Type: Table
Query Data Source Name: XXPN_VR_VOL_HEADERS_V
DML Target Type: Table
DML Target Name: XXPN_VR_VOL_HEADERS_V
i'd appreciate any help.
thanks -
Need help on creating custom skins like chrome
Hi,
I want to create my custom skin like chrome with my own play, pause and seek buttons. Can anybody point me to any documents that can help me to achieve this? Thanks in advance.
Regards,
AmitThats a very open ended question. We have built a sample OSMF player and a skinning solution you can take a look at. http://code.google.com/p/reops/
There are templates and a PDF that describes the capabilities and process. Also walkthrough style samples.
Otherwise the generic answer is desgn as you see fit, and implement the controls as display objects or part of the MediaContainer which could be done as custom MediaElements, then link them to the MediaPlayer or MediaPlayerSprite and call the approp API methods (play/pause/stop/seek/etc.) -
Need help on creating customized visual datagrid
Hi all,
I am new to Flex and just downloaded the trial version of
Flex Builder 3 to test it.
Basically, what I need is a visual representation of some
XML-data from a web-server.
I have managed to use a HttpService-object to import the
XML-file and also succesfully been able to show the data in a
DataGrid.
What I want now is to show the XML data in another visual
context. I want some child elements in the XML-file to float in the
Flex-page as graphical "bubbles" that floats around, so the user
can click on one of them to select the specif child element in the
XML-file.
Have anyone of you guys any experience on how to make that
possible? Any links to any resources etc?
Thank you very much in advance,
Lasse
DenmarkHi Sreenivas,
Thank you for your response!
I've been taken a look on the Bubble Charts diagram, but that
is not really what I am looking for.
What I need is some bubbles floating randomly on the screen
(perhaps moving around). From what I can see, the Bubble Charts
diagram requires some predifined data to construct the position og
size - I want that to be randomized (without the possibility that
the bubbles float into each other).
Can anybody help on that? Please let me know if the problem
is not described clearly. -
Need help while Horizontal clustering
Hi All
I need help while creating horizontal clustering as I have below setup :-
1 windows machine
1 solaris machine
Over solaris machine my domain is active at directory /bea/wls/wls10.3.3/ . In this domain i have a cluster with 2 managed server. Now i want to create a managed server over windows machine and want to administer that from solaris machine admin server.
Can someone please help me with a step by step approiach for this. As i saw some posts but they say that while using pack and unpack commands the direcotry structure should be same which is not possible in my case.Please suggest
SharadHi Sharad,
It is not mandatory to have the NodeManager for Horizontal Clustering. If you dont want to use NodeManager then do the following for Horizontal Clustering:
1.. Create 2-3 Managed Servers from AdminConsole. Suppose 3 Managed Servers MS1,MS2,MS3 …which u want to run on 3 Different Physical Boxes.
2.. Install WebLogic and JDK exactly same Identical Locations in the Managed Server Boxes as well… sothat the JAVA_HOME and WL_HOME and BEA_HOME directories will be same in all the Physical Boxes.
3.. Now Use the “pack/unpack” BEA utility to make the domain zip
if you use ”Pack/Unpack” weblogic utility to do this. By doing this you can ensure that you will never get invalid (domain salt file not found) Or Many Security & SSL Handshake related errors kind of error while starting your ManagedServer remotely. (for detail of Pack/Unpack commands)
http://download.oracle.com/docs/cd/E13179_01/common/docs92/pack/commands.html#wp1068441
4.. Now Whenever u want to start the Managed Servers go inside the “<DOMAIN_HOME>\bin” and then run the “startManagedWebLogic.sh” like folowing
If you want to use Nodemanager in this case then go with nmEnroll option to enroll your machine.
Open a Shell/command prompt in Box-B and then run setWLSEnv.sh/setWLSEnv.cmd
Then Enroll the Nodemanager using WLST command…
http://download-llnw.oracle.com/docs/cd/E15051_01/wls/docs103/nodemgr/nodemgr_config.html#wp1100844
Syntax: nmEnroll([domainDir], [nmHome])
java weblogic.WLST
connect('weblogic','weblogic','t3://1.1.1.1:7001')
nmEnroll('/opt/apps/bea103/user_projects/MyDomainOne','/opt/apps/bea103/wlserver_10.3/common/nodemager')
Above command will Enroll the Nodemanager of Box-B in Domain (MyDomainOne) created in Box-A
--> Start Nodemanager in Box-B
--> Login to AdminConsole of Box-A and then check that the Machine-2 Nodemanager is showing “reachable” or “incative”…Ideally Now it should be ‘Reachable’
--> Login to AdminConsole and Now Create a Cluster and add these both Managed Servers In that Cluster.
--> Now start Both Managed Servers through AdminConsole.
Hope this is clear if you have any further query please let me know.
Regards,
Kal -
Error while creating a cube using Cube Builder
we have installed the Cube builder for SSM 7.0
while creating the cube I am facing a error and the .TRC file contents are as follows :-
LSS>
LSS> set control LINKID SSM_CB_EA
LSS>
LSS> .... capture cube id in a control var to simplify queries on other tables
LSS> access lslink
LSLink> connect SSM_CB_EA
LSLink>
LSLink> SELECT ID FROM CPMS_CB_CUBES WHERE NAME = 'CUBEBUILDER1'
[Microsoft][ODBC SQL Server Driver][SQL Server]Invalid object name 'CPMS_CB_CUBES'.
SQLSTATE: S0002
SQL System code: 208
LSLink> lss create code = 'set control CUBEID ' + ID
LSLink> output proc setcubeid;PIPADMINDEFAULT over
LSLink> peek create nohead nonumb
No Fields currently Selected
ACC004:
No Record Has Been Accessed From the Database.
ACC004:
No Record Has Been Accessed From the Database.
CHE FRE
CHE UPD
Kindly help me out........Hi Martin,
I believe that the issue you are encountering now is that you're using the wrong set of procedures for accessing MS SQL Server.
In section 5.4.1 (Setting up SAP NetWeaver System database software) in the Strategy Management configuration guide, there is a section which discusses steps that are required depending on whether or not you are using MaxDB or MS SQL Server as your system database behind NetWeaver CE. My guess is that you have not followed the steps described for SQL Server here. This is simple to do thoughm, because all you need to do is copy the files in the "<install-dir>\SAP\SSM\InternetPub\procs\sqlsrvr_procs" into the <install-dir>\SAP\SSM\InternetPub\procs" directory.
This is required because, when using Cube Builder or Entry and Appropval, the PAS component communicates directly with the system database in order to load data from there into PAS. Because MaxDB and SQL Server have different SQL syntax, specifically regarding field concatenation, slightly different SQL is required. So if you copy the SQL Server specific procedures across, you should be able to successfully build your model from Cube Builder.
Of course, having read through your question again I'm not 100% sure that this is what you are hitting. The problem you're seeing seems to be that, when we internally concatenate some selected fields together, we aren't finding a field called ID. However, the SQL select being issued doesn't seem to have returned any error messages, so I'm not sure why there is a problem referencing the field.
The only thing that comes to mind is a problem that I ran into at one point with the type of driver I was using to connect to SQL Server. The PAS component of Strategy Management, even though it runs on Windows 2003 Server 64bit, is still only a 32bit component. This means that, when configuring the System Data Sources within the ODBC applet in Control Panel, it is critical that the 32bit version of that ODBC applet be used - as documented in the note at the end of section 5.4.3 in the configuration guide. The reason this is important is because, if you use an OLEDB connection to SQL Server, for some reason the field names are not returned correctly. It is only when using the ODBC driver that the field names are returned correctly.
So please ensure that you are using the ODBC driver for your Link ID which connects to SQL Server, and not an OLEDB connection.
Hope this helps,
Robert
Edited by: Robert Holland on Dec 19, 2008 3:23 PM -
Hiding Reference Fields While creating Customer Master
Hi,
I want to Hide Reference fields While creating customer master, Thanks in advance
Thanks
seshuHello,
No need of screen exits or ABAPer.
You can easily do it with Transaction Variant using T-Code - SHD0 (SHD zero).
If you dont know how to create a Transaction Variant, just search the forum with Date Range "All" & you will get lot of guidence.
You will just need help of Basis person for removing end-user's authorization for XD01 & giving authorization for (e.g.) ZXD01
Hope this helps.
Thanks,
Jignesh Mehta -
I need help with Creating Key Pairs
Hello,
I need help with Creating Key Pairs, I generate key pais with aba provider, but the keys generated are not base 64.
the class is :
import java.io.*;
import java.math.BigInteger;
import java.security.*;
import java.security.spec.*;
import java.security.interfaces.*;
import javax.crypto.*;
import javax.crypto.spec.*;
import au.net.aba.crypto.provider.ABAProvider;
class CreateKeyPairs {
private static KeyPair keyPair;
private static KeyPairGenerator pairGenerator;
private static PrivateKey privateKey;
private static PublicKey publicKey;
public static void main(String[] args) throws Exception {
if (args.length != 2) {
System.out.println("Usage: java CreateKeyParis public_key_file_name privete_key_file_name");
return;
createKeys();
saveKey(args[0],publicKey);
saveKey(args[1],privateKey);
private static void createKeys() throws Exception {
Security.addProvider(new ABAProvider());
pairGenerator = KeyPairGenerator.getInstance("RSA","ABA");
pairGenerator.initialize(1024, new SecureRandom());
keyPair = pairGenerator.generateKeyPair();
privateKey = keyPair.getPrivate();
publicKey = keyPair.getPublic();
private synchronized static void saveKey(String filename,PrivateKey key) throws Exception {
ObjectOutputStream out= new ObjectOutputStream(new FileOutputStream(filename));
out.writeObject(key);
out.close();
private synchronized static void saveKey(String filename,PublicKey key) throws Exception {
ObjectOutputStream out= new ObjectOutputStream( new FileOutputStream(filename));
out.writeObject(key);
out.close();
the public key is:
�� sr com.sun.rsajca.JSA_RSAPublicKeyrC��� xr com.sun.rsajca.JS_PublicKey~5< ~��% L thePublicKeyt Lcom/sun/rsasign/p;xpsr com.sun.rsasign.anm����9�[ [ at [B[ bq ~ xr com.sun.rsasign.p��(!g�� L at Ljava/lang/String;[ bt [Ljava/lang/String;xr com.sun.rsasign.c�"dyU�| xpt Javaur [Ljava.lang.String;��V��{G xp q ~ ur [B���T� xp ��ccR}o���[!#I����lo������
����^"`8�|���Z>������&
d ����"B��
^5���a����jw9�����D���D�)�*3/h��7�|��I�d�$�4f�8_�|���yuq ~
How i can generated the key pairs in base 64 or binary????
Thanxs for help me
Luis Navarro Nu�ez
Santiago.
Chile.
South America.I don't use ABA but BouncyCastle
this could help you :
try
java.security.Security.addProvider(new org.bouncycastle.jce.provider.BouncyCastleProvider());
java.security.KeyPairGenerator kg = java.security.KeyPairGenerator.getInstance("RSA","BC");
java.security.KeyPair kp = kg.generateKeyPair();
java.security.Key pub = kp.getPublic();
java.security.Key pri = kp.getPrivate();
System.out.println("pub: " + pub);
System.out.println("pri: " + pri);
byte[] pub_e = pub.getEncoded();
byte[] pri_e = pri.getEncoded();
java.io.PrintWriter o;
java.io.DataInputStream i;
java.io.File f;
o = new java.io.PrintWriter(new java.io.FileOutputStream("d:/pub64"));
o.println(new sun.misc.BASE64Encoder().encode(pub_e));
o.close();
o = new java.io.PrintWriter(new java.io.FileOutputStream("d:/pri64"));
o.println(new sun.misc.BASE64Encoder().encode(pri_e));
o.close();
java.io.BufferedReader br = new java.io.BufferedReader(new java.io.FileReader("d:/pub64"));
StringBuffer keyBase64 = new StringBuffer();
String line = br.readLine ();
while(line != null)
keyBase64.append (line);
line = br.readLine ();
byte [] pubBytes = new sun.misc.BASE64Decoder().decodeBuffer(keyBase64.toString ());
br = new java.io.BufferedReader(new java.io.FileReader("d:/pri64"));
keyBase64 = new StringBuffer();
line = br.readLine ();
while(line != null)
keyBase64.append (line);
line = br.readLine ();
byte [] priBytes = new sun.misc.BASE64Decoder().decodeBuffer(keyBase64.toString ());
java.security.KeyFactory kf = java.security.KeyFactory.getInstance("RSA","BC");
java.security.Key pubKey = kf.generatePublic(new java.security.spec.X509EncodedKeySpec(pubBytes));
System.out.println("pub: " + pubKey);
java.security.Key priKey = kf.generatePrivate(new java.security.spec.PKCS8EncodedKeySpec(priBytes));
System.out.println("pri: " + priKey);
catch(Exception e)
e.printStackTrace ();
} -
While creating customer from AR responsibility, I am getting an error while clicking "details" tab for "Ship to"
error I am getting are
1. The data that defines the flexfield on this field may be inconsistent. Inform your system administrator that the function: KeyFlexfieldDefinitionFactory.getStructureNumber could not find the structure definition for the flexfield specified by Application = SQLGL, Code = GL# and Structure number =
2. Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.sql.SQLException: ORA-20001: Operating unit -1 does not exist in the target database. ORA-06512: at "APPS.APP_EXCEPTION", line 72 ORA-06512: at "APPS.GL_GLOBAL", line 65 ORA-06512: at line 1 ;
any idea why is it coming, I checked Operating unit profile option i.e MO: Op Unit and MO: Sec. , all are fine.The error is occuring because Oracle is trying to validate/set a DFF.
Check the DFF attached to the customer entity, address entity or site use entity.
Especially look at the value sets attached to the DFF.
Look at the value set definition and the default value for the field.
Hope this helps,
Sandeep Gandhi -
Error while creating offline cube
Hi All,
while creating offline cube in excel iam facing below issue.
Microsoft OLE DB Provider for Analysis services 2005:
Query(3,2) Parser:The syntax for 'DIMENSION' is incorrect
could any one please let me the solution for above error
Thanks in advanceHi Indra19,
According to your description, you are creating a offline cube in Excel, and encounter the error
Microsoft OLE DB Provider for Analysis services 2005:
Query(3,2) Parser:The syntax for 'DIMENSION' is incorrect
An offline cube file (.cub) stores data in the form of an Online Analytical Processing (OLAP) cube. This data may represent a portion of an OLAP database from an OLAP server or it may have been created independently of any OLAP database. In your scenario,
it' hard to give your the root reason based on the limited information. Please ensure that you setting is correct, here is a link for your reference.
http://office.microsoft.com/en-us/excel-help/work-with-offline-cube-files-HP010087040.aspx
If the issue persits, please elaborate your issue with detail error message and setting, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support -
"SYNTAX_ERROR" while creating customer Master T-code-"FD01
Dear All,
Getting an error "SYNTAX_ERROR" while creating customer Master T-code-"FD01". The error as follwoes
Short text :Syntax error in program "CMD_EI_API_CHECK==============CP ".
What happened? : Error in the ABAP Application Program
The current ABAP program "SAPLCMD_BTE_OUTBOUND" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CMD_EI_API_CHECK==============CP " in include
"CMD_EI_API_CHECK==============CM04T " in
line 82:
""LS_KNVP_NEW_PARTIAL-PERNR" and "<LS_KNVP_NEW>-PERNR" are not mutually"
" convertible in a Unicode program. ."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLCMD_BTE_OUTBOUND" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
Error analysis :The following syntax error was found in the program
CMD_EI_API_CHECK==============CP :
""LS_KNVP_NEW_PARTIAL-PERNR" and "<LS_KNVP_NEW>-PERNR" are not mutually"
" convertible in a Unicode program. ."
Information on where terminated :Termination occurred in the ABAP program "SAPLCMD_BTE_OUTBOUND" - in
"CMD_CUSTOMER_BTE_1321_IMPL".
The main program was "SAPMF02D ".
In the source code you have the termination point in line 330
of the (Include) program "LCMD_BTE_OUTBOUNDU01".
Please help us on this,
Thanks in Advance,
Kumar.KDear Kumar,
please kindly apply the SAP note 1511101.
I hope this helps.
Mauri -
While creating customer master i am getting the Communication error
Hi experts,
while creating customer master i am getting the Communication error with the external tax system (VERTEX_MS0018) please tellme how to solve this issue
Regards,
Anil prasad
Edited by: prasadanil on Sep 16, 2011 12:52 PMhI Prasad,
It seems you are maintaining the address data for a country with jurisdiction code. Different external control systems can behave in different ways.
1. You entered a jurisdiction code that matches the postal code but not the city (possibly due to a typo).
a) Behavior when you use Taxware: There is no message and data can be saved.
b) Behavior when you use Vertex: Due to the incorrect city, no comparison jurisdiction code can be determined and message TAX_TXJCD861 is issued with a text from the vertex system that may be unintelligible.
2. You do not enter a jurisdiction code, but you do enter a postal code and a city that does not match the code (possibly due to a typo).
a) For Taxware: If the jurisdiction code could not be explicitly determined, a selection dialog box containing the relevant tax jurisdiction codes for the postal code appears. You select one. This and the corresponding city are transferred.
b) For Vertex: The TAX_TXJCD861 message is issued (behavior as in 1b). Other terms TAX_TXJCD861, TAX_TXJCD101, TAX_TXJCD107.
For resolving this issue, you can check SAP Note 677850 - Address data: Check/new determination jurisdiction code.
Hope you will resolve the above issue with these inputs.
Let me know if you need any further details.
Ravi. -
Internal number not showing while creating customer master record
Dear All.
After creation of account group and doing patner determination procedure, while creating customer master record it is showing all the 4 functions of partner in partner function tab page but the internal number is not displaying. I have set number range internally.
Thanks..
CG Balaji> Dear All.
>
> After creation of account group and doing patner
> determination procedure, while creating customer
> master record it is showing all the 4 functions of
> partner in partner function tab page but the internal
> number is not displaying. I have set number range
> internally.
>
> Thanks..
>
> CG Balaji
Hi,
In your partner determination procedure for Customer master, apart from assigning a Pratner proc to your A/c grp, you also need to maintain the combination of your a/c group with the partner functions that you have in your procedure.
On the left side panel, you have a link (i think 5th) saying Account group - Function assignment. In this, maintian the partner functions that you want to your a/c grp.
This will allow taking INTERNAL numbers during customer creation.
Thanks and reward points if useful
Maybe you are looking for
-
Rented movie on iMac, but need to xfer to macbook to hook up to TV
Hi, I just rented two itunes movies on my iMac. I thought I could later share or move them to my wifes macbook which is what we use to hook up to the TV. However, it appears I can't move movie rentals between computers. What gives? Can I get apple to
-
How to use Javascript Calendar In ALUI portlet
Hi all Sandip here , I have just started to work on ALUI portal.I have one problem In my application I want use calendar bt problem is wherever I am using the calendar that page is loosing the focus once I am returning to that page using BACK link. I
-
Error pages using web.config
I have a site which is set up in 2 main sections. I have a custom error page working for one half of the site but need to specify a different error page for the other half of the site. For example, any errors which occur while on pages in the /html f
-
3.1 update on Windows bricked my iPhone
There are serious problems with the new iTunes 9 and 3.1 iPhone update. 1) The 3.1 update bricked my iPhone when iTunes hung at the "installing software" phase (100% CPU, no I/O for 2 hours). I could not kill the iTunes process and had to reboot. Aft
-
I have a macbook air. It felt down from my hand on its corner and has damaged. The up-left corner is chamfered like 0.5 cm on both lower and upper cases. I would like to know what can I do to repair its body since there is not any software problem wi