Need help with security

Hi. I'm new to this list, and pretty new to web services. I'm
currently trying to apply security to an existing application, and
i've been studing the tutorials at sun web
(http://java.sun.com/webservices/docs/1.4/tutorial/doc/). In the
simple sample, in the build.xml file, there's a 'gen-server' target
which i believe creates ties of the service, right? Well, i do the
same step in my application (just before packaging into a raw war
file), and move all the generated files, together with my server
compiled classes, to the WEB-INF dir. Therefore i have all that class
files in /WEB-INF/classes/hello (i'm doing this with a helloword
example). Included in those files, theres a file called
"HelloIF_Tie.class", which i assume is the tie for my service, created
by the 'gen-server' target.
After this i create a raw war file using the jar tool, and take the
generated file to a dir named "dist". Then i try to create a cooked
war file using the wsdeploy tool. However when i try to run the
application, the server seems to ignore any security options i have
configured. Looking into the deployable war file i found that it had
generated quite a few more class files
(HelloIF__HelloService__Tie.class between them), and that in the
jaxrpc-ri-runtime.xml file there was the following line:
tie='hello.HelloIF__HelloService__Tie'
This seemed a bit strange to me, since i believed that my tie file was
HelloIF_Tie.class. Therefore, i tried something: changing that line
for
tie='hello.HelloIF_Tie'
And packaging all into a war file again with the jar tool, everything
runs fine. However its kind of boring doing this every time i change
the server code. So my question is...
is it possible to tell the wsdeploy tool not to generate any tie
files, and use the ones existing in the raw war file???
is there any other solution to my problem???
Im sorry if these questions are stupid, but im still quite novice with
jwsdp and i dont know if im doing things right. Thank you very much.

CQAndroid, help is here! I am familiar with this feature and use it with my own laptop and iPhone and well. It's a great feature! It forwards all of your text messages to your phone and Macbook, if you like. There's a few steps to try. First go to your iPhone Messages settings (Settings > Messages > iMessage) and turn off iMessages and turn it on again. Then go to the iMessages Settings on your Mac and do the same. Also make sure to activate your telephone number in the iMessages settings on your Mac. Try this and keep us posted please. Thanks!
KristieQ_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Similar Messages

Need help with security design!

Hi,
I haven't worked with security design very much. Currently I'm about to develop an application to my father which should implement some sort of security.
One of the reasons for this application besides making my father happy is educating myself.
The application is an online image album.
The security could be divided in role-based security and instance level security.
Role-based (NO PROBLEM):
A user cannot delete another user, an administrator can delete users.
Instance-level (DON'T KNOW HOW):
A user can load other users image albums if he/her is allowed/granted to view the album and its images. Note that the user could be granted to view the album, but not all of its images.
My problem is how I should design the "instance-level" security? Should I keep a ACL (Access Control List) with each instance of album and image?
This seems to be a common functionality to add view/load/read/write permissions to an instance in runtime to let a certain user to operate on an asset?
Have searched the Internet but haven't found any nice framework to help me.
Could anyone with some experience please help me out?!
Kind regards, Andreas

Hi,
I ran into the same problem. Could you resolve it?
please give me your feedback.

Need help with Security when running AS3 inside browser

Hi,
I am fairly new to flash, but a fairly experienced
programmer.
I have created a game that runs perfectly and communicates to
a WinSock server over port 4000 to publish its final score to.
Using simple XMLSocket and Send.
When I run the game in the standalone flash player everything
works perfectly as it should
However when I embed in a HTML page or similar it goes wrong.
The game works fine, but the final posting to the WinSock socket
server fails. I have retrieved the error message.
ioErrorHandler: [SecurityErrorEvent type="securityError"
bubbles=false cancelable=false eventPhase=2 text="Error #2048"]
My server is a local server to me running IIS 6. Everything
runs fine by the standalone flash player so I know ports are clear
and firewalls are not the problem.
Searching around google and forums I have found out that in
9,0,124,0 (the flash I am running) that they made some security
enhancements, namely you need to post a crossdomain file.
My file is sat in the wwwroot of my webserver where my flash
swf is hosted and looks like
<cross-domain-policy>
<allow-access-from domain="*" secure="false"/>
</cross-domain-policy>
I have also tried adding the following to the 1st section of
the swf file
Security.loadPolicyFile("
http://mydomainname.com/crossdomain.xml");
I have tried all conbinations, but I cannot get the flash to
communicate to the socket server when it inside a web browser.
If i run it in the standalone player, everything works
perfectly.
Can someone help me please. I have been googling and ripping
my hair out for ages. This is the final stage of my project and I
am failing at the final step.
Just to add.
My server and testing computer are on the same domain, the
web server is a win2003 server and my testing and coding server is
a XP machine running IE7. They are linked by a ADSL router sharing
the same external IP address but via DHCP addressing. Everything
works fine for port forwarding of the winsocket port.
Just to emphasis, I believe this setup is correct, as it all
works fine when I run in the flash player.
Many thanks

I fixed it eventually.
In flash 9.0.124.0 they now force you to have a socket XML
server running on port 843 a server somewhere if you wish to use
XMLSocket inside a browser.
Nothing to do with domain or crossdomain.xml files.
You need to also call
Security.loadPolicyFile("xmlsocket://x.x.x.x:843") before you
open the socket.
to load in the XML that defines what is allowed.
Search google for AS3 and socket server port 843 and you will
find examples and even a simple Java based server to use.

Need help with security error

com.ms.security.SecurityExceptionEx[staff4 init]; cannot access file treble.gif
treble.gif is a small picture that appears in the applet.
I put it in the same folder as everything else and
it works fine in applet viewer
what could the problem be?

perfect again
thanks so much KP
I swear that the only two methods the java tutorial suggests are
myImage = getImage(URL); //in a method in an Applet subclass only
or
myImage = Toolkit.getDefaultToolkit().getImage(filenameOrURL);
no mention of getDocumentBase()....hrmm
anyway, if you wanna see my baby check her out
ashonline.com/anotherband/misc/staff4

Help with Secure Erase

I need help with Secure Erase 7-pass in the utility disk. It keeps getting stuck at 25% and a pop up comes out saying not enough memory in the start up disk. Can someone tell me whats going on? After the pop up come on the erase will not proceed.

Hello,
moving files from your computer
You can delete files, folders, and other items on your disk that you no longer need.
You may want to store a backup copy or an archive of important items if you are trying to clear space on your hard disk for other things.
Drag the items to the Trash (at the end of the Dock).
Any files or folders you drag to the Trash remain there until you empty the Trash. If you change your mind about something, you can still retrieve it from the Trash if you haven't emptied it yet. Click the Trash icon to open the Trash window, then drag items back to your home folder.
Choose Finder > Empty Trash.
Even after you empty the Trash, deleted files may still be recovered by using special data-recovery software. To delete files so that they cannot be recovered, choose Finder > Secure Empty Trash. Files deleted in this way are completely overwritten by meaningless data. This may take some time, depending on the size of the file. To prevent the recovery of files you deleted previously, open Disk Utility (in Applications/Utilities), choose Help > Disk Utility Help, and search for help on erasing free disk space.
If an item is locked, you cannot put it in the Trash. Select the item and choose File > Get Info, then deselect the Locked checkbox in the General pane. If you do not own the item, you may need to provide an administrator's name and password to put the item in the Trash.
Press the Option key when you choose Empty Trash to prevent the warning message from appearing. You can also turn off the warning in the Advanced pane of Finder Preferences.
Also... using the Erase Free Disk Space button:
Erasing free disk space
When you delete files by emptying the Trash, Mac OS X deletes the information used to access the files but doesn't actually delete the files. Although the disk space used by deleted files is marked as free space, deleted files remain intact until new data is written over them. Because of this, deleted files can be recovered.
You can use Disk Utility to erase the "free" space used by deleted files by having zeros written over the space once, seven times, or 35 times. If you have a lot of free space on your disk, overwriting the free space several times can take a long time.
Erasing free disk space does not erase the other files on your disk.
In Disk Utility, select the disk or volume in the list with the free space you want to erase.
Click Erase, then click the Erase Free Space button.
Select an option, then click Erase.
After the process begins, you can interrupt it without harming your data.
You might see a message saying that you are running out of disk space, but you can ignore that warning. When this operation is complete, you will have the same amount of free space as you did when it started.
You can also erase free space when you empty the Trash in the Finder. Choose Finder > Secure Empty Trash.
Carolyn
Message was edited by: Carolyn Samit

HT5699 The country I am living in is not on the Apple Contact Support list and I need help with my security questions.

I am currently living in Tunisia but it's not on the Apple Contact Support list. I need help with my security questions which I cannot remember the answers. There is no link to send a reset email. What do I do?

Click here and ask the iTunes Store staff for assistance.
(114040)

HT5312 i need help with the security questions is there some way to get you to remind me what they were from e-mail or other wise

I need help with the security Questions is there some way to get you to remember them by e-mail of other wise

Read the HT5312 page that you posted from, it has instructions for how to reset them i.e. if you have a rescue email address set up on your account then steps 1 to 5 half-way down that page should give you a reset link.
If you don't have a rescue email address then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

I need help with Creating Key Pairs

Hello,
I need help with Creating Key Pairs, I generate key pais with aba provider, but the keys generated are not base 64.
the class is :
import java.io.*;
import java.math.BigInteger;
import java.security.*;
import java.security.spec.*;
import java.security.interfaces.*;
import javax.crypto.*;
import javax.crypto.spec.*;
import au.net.aba.crypto.provider.ABAProvider;
class CreateKeyPairs {
private static KeyPair keyPair;
private static KeyPairGenerator pairGenerator;
private static PrivateKey privateKey;
private static PublicKey publicKey;
public static void main(String[] args) throws Exception {
if (args.length != 2) {
System.out.println("Usage: java CreateKeyParis public_key_file_name privete_key_file_name");
return;
createKeys();
saveKey(args[0],publicKey);
saveKey(args[1],privateKey);
private static void createKeys() throws Exception {
Security.addProvider(new ABAProvider());
pairGenerator = KeyPairGenerator.getInstance("RSA","ABA");
pairGenerator.initialize(1024, new SecureRandom());
keyPair = pairGenerator.generateKeyPair();
privateKey = keyPair.getPrivate();
publicKey = keyPair.getPublic();
private synchronized static void saveKey(String filename,PrivateKey key) throws Exception {
ObjectOutputStream out= new ObjectOutputStream(new FileOutputStream(filename));
out.writeObject(key);
out.close();
private synchronized static void saveKey(String filename,PublicKey key) throws Exception {
ObjectOutputStream out= new ObjectOutputStream( new FileOutputStream(filename));
out.writeObject(key);
out.close();
the public key is:
�� sr com.sun.rsajca.JSA_RSAPublicKeyrC�� xr com.sun.rsajca.JS_PublicKey~5< ~��% L thePublicKeyt Lcom/sun/rsasign/p;xpsr com.sun.rsasign.anm��9�[ [ at [B[ bq ~ xr com.sun.rsasign.p��(!g�� L at Ljava/lang/String;[ bt [Ljava/lang/String;xr com.sun.rsasign.c�"dyU�| xpt Javaur [Ljava.lang.String;��V��{G xp q ~ ur [B��T� xp ��ccR}o��[!#I��lo��
��^"`8�|��Z>��&
d ��"B��
^5��a��jw9��D��D�)�*3/h��7�|��I�d�$�4f�8_�|��yuq ~
How i can generated the key pairs in base 64 or binary????
Thanxs for help me
Luis Navarro Nu�ez
Santiago.
Chile.
South America.

I don't use ABA but BouncyCastle
this could help you :
try
java.security.Security.addProvider(new org.bouncycastle.jce.provider.BouncyCastleProvider());
java.security.KeyPairGenerator kg = java.security.KeyPairGenerator.getInstance("RSA","BC");
java.security.KeyPair kp = kg.generateKeyPair();
java.security.Key pub = kp.getPublic();
java.security.Key pri = kp.getPrivate();
System.out.println("pub: " + pub);
System.out.println("pri: " + pri);
byte[] pub_e = pub.getEncoded();
byte[] pri_e = pri.getEncoded();
java.io.PrintWriter o;
java.io.DataInputStream i;
java.io.File f;
o = new java.io.PrintWriter(new java.io.FileOutputStream("d:/pub64"));
o.println(new sun.misc.BASE64Encoder().encode(pub_e));
o.close();
o = new java.io.PrintWriter(new java.io.FileOutputStream("d:/pri64"));
o.println(new sun.misc.BASE64Encoder().encode(pri_e));
o.close();
java.io.BufferedReader br = new java.io.BufferedReader(new java.io.FileReader("d:/pub64"));
StringBuffer keyBase64 = new StringBuffer();
String line = br.readLine ();
while(line != null)
keyBase64.append (line);
line = br.readLine ();
byte [] pubBytes = new sun.misc.BASE64Decoder().decodeBuffer(keyBase64.toString ());
br = new java.io.BufferedReader(new java.io.FileReader("d:/pri64"));
keyBase64 = new StringBuffer();
line = br.readLine ();
while(line != null)
keyBase64.append (line);
line = br.readLine ();
byte [] priBytes = new sun.misc.BASE64Decoder().decodeBuffer(keyBase64.toString ());
java.security.KeyFactory kf = java.security.KeyFactory.getInstance("RSA","BC");
java.security.Key pubKey = kf.generatePublic(new java.security.spec.X509EncodedKeySpec(pubBytes));
System.out.println("pub: " + pubKey);
java.security.Key priKey = kf.generatePrivate(new java.security.spec.PKCS8EncodedKeySpec(priBytes));
System.out.println("pri: " + priKey);
catch(Exception e)
e.printStackTrace ();
}

Need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook.......

need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook? removal of cmos, resetting laptop, using cccleaner, windows password recovery and hiren's was noneffective, any help is appreciated. thanks

Hi,
As your notebook is a business class machine, security is more stringent - the password is stored in non-volatile memory and there are no 'backdoor' passwords. Your best option would be to contact HP regarding this.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Need help with installation

I recently received a laptop from school to access my online classes. When I tried to use Adobe Reader I received the following message: Adobe Reader 9.1 has encountered a problem and needs to close. Sorry for the inconvenience. I tried tech support at school and was told to uninstall and reinstall the program. During the installation process I received the following error: Error 1321 The installer has insufficient privileges to modify the file C:/Program Files/Adobe/Reader 9.0/Reader/Onix32dll. I need this program for school. Can some one please help me.

Hello again, Michael,
Was unable to do the UAC changes. Buttons where not highlighted. I just went ahead and uninstalled Adobe and downloaded Foxitsoftware and it works. Thanks for all your help Michael you have made my online school experience better.
Sincerely,
Sherri Lee
Date: Mon, 13 Jul 2009 11:03:52 -0600
From: [email protected]
To: [email protected]
Subject: Need help with installation
Hello again, Sherri:
It's my pleasure to provide assistance when I can :•) Having just recently graduated after 7 years of effort just to get a 2-year degree, I can relate to needing software to get class work accomplished. I will do everything I can to make it happen for you today.
Since you didn't mention, the UAC setting, I'd like you to disable it for me if it isn't already:
1. Open Control Panel
2. Under User Account and Family settings, click on the "Add or remove user account"
3. Click on any user account
4. Under the user account click on the "Go to the main User Account page" link.
5. Under "Make changes to your user account", click on the "Change security settings" link
6. In the "Turn on User Account Control (UAC) to make your computer more secure" click to unselect the "Use User Account Control (UAC) to help protect your computer". Click on the Ok button.
7. You will be prompted to reboot your computer - do so when ready
You may need to uninstall/reinstall Reader after the reboot in order for the problem to go away, but that part I am not certain of. Try to duplicate the issue prior to taking that step.
If you are unable to resolve issues with Adobe Reader, I recommend using a different reader that has much less bloat and is updated regularly:
http://www.foxitsoftware.com/pdf/reader/
FoxIT is a FREE alternative to using Adobe's Reader. Support for free Adobe products is limited forums such as this. The same holds true for open source alternatives except the manufacturer usually helps support their forums while Adobe doesn't monitor this forum or any like it. I know how important it is for you to focus on your classes so don't beat your head against a wall just because Reader won't work when a viable solution exists.
Best of success in your pursuit of knowledge!
Michael
>

[Need help with a swf file]

Hello,
I need help with a flash demo that I am creating. I have a
main swf file that contains links to other sub swfs that I have
created. What I really want this to do is... when I click on one of
the link on the browser, the other swf have to load in the window.
I tried to code it with .loadMovie,.... but for some weird reason,
it is not showing up.
Can anyone help me on this?
Thanks

you might have a security violation and you do have a
load-target issue. remove that "_parent": there's no 2nd parameter
in the loadMovie() method.
if you want to replace the main swf with that url, loading
into _root is fine. otherwise, you want to use a different
target.

Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?

Hi
Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?
How can I change Permissions for the individual users to see specific projects or all projects in project center and to see specific quick launch items?
For Example: if i have 4 users, A, B, C and D. what i want is:
User A can see everything and act as a project manager or Admin.
User B can view all projects in project centre but can change the schedule or resource assignment etc.
User C can only act as approver of projects and can view all projects in project centre.
User D can only view specific projects for which permissions are given.
can i have some expert help in sorting and understanding permission modes... as i was playing with project server mode permissions and can't figure out how to apply the above scenario to set of my user.
Thanks in Advance
Cheers
AJ
Ajay Kumar

Hi Ajay,
Please refer to this link for detailed explanations about PS2013 security model.
http://technet.microsoft.com/en-us/library/cc197638(v=office.15).aspx
Actually, it will take a couple of days to explain in detail the security model that is a fundamental and tricky aspect of every PS implementation. But basically, you NEVER set permissions for a single user. You have groups in which your insert users. Groups
define "what users can do". Then you associate groups to a corresponding category. Categories define "what user can see". Thus the association of a group with a category will set "what the user can do on the objects he can see". Then, for more advanced security
level, you can use the RBS that will consist in "branches" in which you'll insert users. Based on those branches, you'll customize categories to fine-tune what user can see (for projects and resources) depending on the RBS branch and level.
I'd advice you to start "playing" in a test environment with the default categories/groups that might probably cover your need.
Concerning your 4 users:
user A : add him to the "administrator" group. Be careful that you're mentionning either project manager or administrator, which are 2 groups/categories with totally different permissions level.
user B : basically can see everything and change everything? it could be in the project manager group, assuming that there are no project visibility restrictions on the category via the RBS.
user C : waht do you mean by "approver"? Workflow approvals? Then it will be the portfolio manager group. Task update or timesheet approval? Then it is another long topic: please refer in the documentation to the "status manager" and "timesheet manager"
concepts. There are not related to the security model. In a few words, the status manager is the owner of the project plan, is defined for each task and approves tasks updates. The timesheet manager is an attribute defined for each resource in its parameters
and approves resource timesheet.
user D : you have to define which permission level must be given to this user. Basically it could be a team member that will see only projects he's in the project team. Note that team member cannot interact with the project plan in another way than submitting
timesheets and/or tasks updates which must be approved.
Once more, those are large and complex subjects that require a deep dive into your business model and tons of tests in a test environment.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

I need help with the Quote applet.

Hey all,
I need help with the Quote applet. I downloaded it and encoded it in the following html code:
<html>
<head>
<title>Part 2</title>
</head>
<body>
<applet      codebase="/demo/quote/classes" code="/demo/quote/JavaQuote.class"
width="300" height="125" >
<param      name="bgcolor"      value="ffffff">
<param      name="bheight"      value="10">
<param      name="bwidth"      value="10">
<param      name="delay"      value="1000">
<param      name="fontname"      value="TimesRoman">
<param      name="fontsize"      value="14">
<param      name="link"      value="http://java.sun.com/events/jibe/index.html">
<param      name="number"      value="3">
<param      name="quote0"      value="Living next to you is in some ways like sleeping with an elephant. No matter how friendly and even-tempered is the beast, one is affected by every twitch and grunt.|- Pierre Elliot Trudeau|000000|ffffff|7">
<param      name="quote1"      value="Simplicity is key. Our customers need no special technology to enjoy our services. Because of Java, just about the entire world can come to PlayStar.|- PlayStar Corporation|000000|ffffff|7">
<param      name="quote2"      value="The ubiquity of the Internet is virtually wasted without a platform which allows applications to utilize the reach of Internet to write ubiquitous applications! That's where Java comes into the picture for us.|- NetAccent|000000|ffffff|7">
<param      name="space"      value="20">
</applet>
</body>
</html>When I previewed it in Netscape Navigator, a box with a red X appeared, and this appeared in the console when I opened it:
load: class /demo/quote/JavaQuote.class not found.
java.lang.ClassNotFoundException: .demo.quote.JavaQuote.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.FileNotFoundException: \demo\quote\JavaQuote\class.class (The system cannot find the path specified)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(Unknown Source)
     at java.io.FileInputStream.<init>(Unknown Source)
     at sun.net.www.protocol.file.FileURLConnection.connect(Unknown Source)
     at sun.net.www.protocol.file.FileURLConnection.getInputStream(Unknown Source)
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
Exception in thread "Thread-4" java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletException(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletStatus(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)What went wrong? and how can I make it run correct?
Thanks,
Nathan Pinno

JavaQuote.class is not where your HTML says it is. That is at the relative URL "/demo/quote/".

I desperately need help with Mail, specifically sending

For Starters: I am on OSX 10.9.2 and am trying to use mail 7.2.
https://discussions.apple.com/post!input.jspa?container=2998&containerType=14&qu estion=I+desperately+need+help+with+Mail%2C+specifically+sending
I cannot send. I have been at this for hours and hours and hours. Here are the details.
my mail server however is s1.sistercompany.net
I can receive email just fine. I can also send mail just find having set this up on my iphone and also in thunderbird (which i hate hate hate hate hate hate hate, which is why I am desperate to set up mail)
The settings in thunderbird are as follows:
Servername: s1.sistercompany.net
port: 465
Authentication method: normal password
Connection Security: SSL/TLS
However, I just can't get this to work in Mail. When I write an email and hit send I get a popup that says:
Cannot send message using the server s1.sistercompany.net
The certifcate for this server is invalid.
Now, my tech guy says yeah the certifacte is invalid because you are going through sistercompany server, there should be some way to just accept the certifcate anyway (but he has never used mail before).
So I have serached around and come up with this: http://support.apple.com/kb/PH11706
Which tells me to use the verify certificate dialogue, which I would do except there is no verify certificate dialog. Any thoughts?
<Email Edited by Host>

I don't have a problem watching the Lost episode on abc.com, using a stock MacBook with 512MB RAM. I don't know what technology abc.com uses in their viewer, but I have Flip4Mac and the latest version of Flash player installed.

Need Help with .nnlp File.............A.S.A.P.

I'm having a problem also with my JNLP file. I have downloaded the program onto one computer and that computer is using j2re1.4.2_04
The other computers I believe are all running j2re 1.4.2_05
I'm not sure if that's make a difference, but on the computer with j2re 1.4.2_05 when going to the site where the .jnlp file is located, the application comes up and says Starting Application. After it gets to that screen it just stays there. I really need help with this as soon as possible.
Here is my .jnlp file listed below:
<?xml version="1.0" encoding="utf-8"?>
<jnlp
spec="1.0+"
codebase="http://www.appliedsolutions.com/placewiz"
href="Placewiz.jnlp">
<information>
    <title>Placement Wizard 4.0</title>
    <vendor>Applied Solutions, Inc.</vendor>
    <homepage href="index.html"/>
    <description>Placement Wizard 4.0</description>
    <description kind="short">Short description goes here.</description>
    <offline-allowed/>
</information>
<resources>
    <j2se version="1.4+"/>
    <j2se version="1.3+"/>
     <j2se version="1.5+"/>
    <jar href="Placewiz.jar"/>
</resources>
<security>
      <all-permissions/>
</security>
<application-desc main-class="com/asisoftware/placewiz/loader/Exec">
</jnlp>

This was due to a change in 1.4.2_05
the main class attribute
main-class="com/asisoftware/placewiz/loader/Exec">is wrong - it should be:
main-class="com.asisoftware.placewiz.loader.Exec">this didnt seem to mater before 1.4.2_05, but some change in java since then caused this bad class specification to stop loading.
/Andy

Need help with security

Similar Messages

Maybe you are looking for