NEED HELP Xsan volume is not mounted (strange problem)

I ask the help in solving the volume mount problem. (advance I am sorry for my english)
All began with the fact that the MDC is rebooted and on the two LUNs were gone XSAN label. I relabeled these LUNs using commands:
cvlabel -c >label_list
then in the file label_list I corrected unknown disks on the label with a same names that were. Then I ran the cvlabel label_list command. Finally I got the correct label on all drives.
# cvlabel -l
/dev/rdisk14 [Raidix meta_i          3365] acfs-EFI "META_I"Sectors: 3906830002. Sector Size: 512. Maximum sectors: 3906975711.
/dev/rdisk15 [Raidix QSAN_I          3365] acfs-EFI "QSAN_I"Sectors: 7662714619. Sector Size: 4096. Maximum sectors: 7662714619.
/dev/rdisk16 [Raidix meta_ii         3365] acfs-EFI "META_II"Sectors: 3906830002. Sector Size: 512. Maximum sectors: 3906975711.
/dev/rdisk17 [Raidix 2k_I            3365] acfs-EFI "2K_I"Sectors: 31255934943. Sector Size: 512. Maximum sectors: 31255934943.
/dev/rdisk18 [Raidix 2k_II           3365] acfs-EFI "2K_II"Sectors: 31255934943. Sector Size: 512. Maximum sectors: 31255934943.
/dev/rdisk19 [Raidix QSAN_II         3365] acfs-EFI "QSAN_II"Sectors: 7662714619. Sector Size: 4096. Maximum sectors: 7662714619.
The volume [2K] starts successfully.
but not mounted on the MDC and client.
I ran a volume check:
sh-3.2# cvfsck -wv 2K
Checked Build disabled - default.
BUILD INFO:
#!@$ Revision 4.2.2 Build 7443 (480.8) Branch Head
#!@$ Built for Darwin 12.0
#!@$ Created on Mon Jul 29 17:01:44 PDT 2013
Created directory /tmp/cvfsck3929a for temporary files.
Attempting to acquire arbitration block... successful.
Creating MetadataAndJournal allocation check file.
Creating Video allocation check file.
Creating Data allocation check file.
Recovering Journal Log.
Super Block information.
FS Created On               : Wed Oct 2 23:59:20 2013
Inode Version               : '2.7' - 4.0 big inodes + NamedStreams (0x207)
File System Status          : Clean
Allocated Inodes            : 4022272
Free Inodes                 : 16815
FL Blocks                   : 79
Next Inode Chunk            : 0x51a67
Metadump Seqno              : 0
Restore Journal Seqno       : 0
Windows Security Indx Inode : 0x5
Windows Security Data Inode : 0x6
Quota Database Inode        : 0x7
ID Database Inode           : 0xa
Client Write Opens Inode    : 0x8
Stripe Group MetadataAndJournal             ( 0) 0x746ebf0 blocks.
Stripe Group Video                          ( 1) 0x746ffb60 blocks.
Stripe Group Data                           ( 2) 0xe45dfb60 blocks.
Inode block size is 1024
Building Inode Index Database 4022272 (100%).
   4022272 inodes found out of 4022272 expected.
Verifying NT Security Descriptors
Found 13 NT Security Descriptors: all are good
Verifying Free List Extents.
Scanning inodes 4022272 (100%).
Sorting extent list for MetadataAndJournal pass 1/1
Updating bitmap for MetadataAndJournal extents 21815 ( 0%).
Sorting extent list for Video pass 1/1
Updating bitmap for Video extents 3724510 ( 91%).
Sorting extent list for Data pass 1/1
Updating bitmap for Data extents 4057329 (100%).
Checking for dead inodes 4022272 (100%).
Checking directories 11136 (100%).
Scanning for orphaned inodes 4022272 (100%).
Verifying link & subdir counts 4022272 (100%).
Checking free list. 4022272 (100%).
Checking pending free list.
Checking Arbitration Control Block.
Checking MetadataAndJournal allocation bit maps (100%).
Checking Video allocation bit maps (100%).
Checking Data allocation bit maps (100%).
File system '2K'. Blocks-5784860352 free-3674376793 Inodes-4022272 free-16815.
File System Check completed successfully.
check not helping
sh-3.2# cvadmin
Xsan Administrator
Enter command(s)
For command help, enter "help" or "?".
List FSS
File System Services (* indicates service is in control of FS):
1>*2K[0]                located on big.local:64844 (pid 5217)
Select FSM "2K"
Created           :          Wed Oct 2 23:59:20 2013
Active Connections:          0
Fs Block Size     :          16K
Msg Buffer Size   :          4K
Disk Devices      :          5
Stripe Groups     :          3
Fs Blocks         :          5784860352 (86.20 TB)
Fs Blocks Free    :          3665561306 (54.62 TB) (63%)
Xsanadmin (2K) > show
Show stripe groups (File System "2K")
Stripe Group 0 [MetadataAndJournal] Status:Up,MetaData,Journal,Exclusive
Total Blocks:122088432 (1.82 TB) Reserved:0 (0.00 B) Free:121753961 (1.81 TB) (99%)
MultiPath Method:Rotate
    Primary Stripe [MetadataAndJournal] Read:Enabled Write:Enabled
Stripe Group 1 [Video] Status:Up
Total Blocks:1953495904 (29.11 TB) Reserved:270720 (4.13 GB) Free:129179 (1.97 GB) (0%)
MultiPath Method:Rotate
    Primary Stripe [Video] Read:Enabled Write:Enabled
Stripe Group 2 [Data] Status:Up
Total Blocks:3831364448 (57.09 TB) Reserved:270720 (4.13 GB) Free:3665432127 (54.62 TB) (95%)
MultiPath Method:Rotate
    Primary Stripe [Data] Read:Enabled Write:Enabled
I checked the availability of LUNs on MDC and client, there also all right.
But, unfortunately, the Volume is not mounted
xsanctl mount 2K
mount command failed: Unable to mount volume `2K' (error code: 5)
Please help me to figure out this situation, I will be grateful for any information.
Thanks

That looks like an I/O error. You may have an issue with one or more of the data LUNs. Check the system log for errors.

Similar Messages

Xsan 4 will not mount volume on client

I recently upgraded my MDC and my client computer to Yosemite. I went through the migration process the best I could and created a Configuration Profile on my MDC for my client computer. I installed the profile successfully but the volume will not mount on the client computer. On the client computer within Profiles, the Xsan Configuration Profile has in red "Unsigned" underneath it, is that what is causing the problem?
Also a few notes: there are two other client computers that haven't been upgraded and are running Maverick and the volume does mount to those computers. The volume is also mounted on the MDC and if I go to Disk Utilities on the client computer I do see the volume, just not mounted.
Any help would be great! Thank you.

Thank you Claudio,
After doing much research and testing I believe you are onto something with my fsmpm or my .auth_secret file not being created. After using Server.app on the MDC I used the configure profile within Server.app. After installing the profile on my client computer it didn't mount and when looking within the Library/Preferences/Xsan folder there was no files (including the hidden .auth_secret file). So I then I used the web profile interface to create the configuration profile and this time it installed the fsnameservers and config.plist files but not the hidden auth_secret file and still no mount.
To answer some of you questions, I did try several times the "sudo xsanctl mount Volume Name" but had no success. I was previously running 10.9 on the MDC and my client computer. I am not sure if the MDC already had an Open Directory Master before upgrading and I did have a little bit of problems activating Xsan, because some of my DNS settings had changed. I got that all squared away and Xsan started working.
The reason I believe it is a fsmpm issue is because when I executed the command "sudo xsanctl i" (views the volumes connected to Xsan) I go a message reading "fsmpm not running error3". So after reading this forum Xsan: "fsmpm not running" message in Xsan Admin - Apple Support I copied the .auth_secret from the MDC to my client and still no mount. I tried again with all the files within Library/Preferences/Xsan folder and nothing. I then got the .auth_secret file from another client computer running 10.9 and still no mount, BUT when I copied all the files within the 10.9 client's Library/Preferences/Xsan the volume appeared! YEAH! But I'm not sure if this is a fix I should be happy with or continue to figure out why its not working the proper way? That way in the future I'm not running into this issue over and over again.
So I need to figure out either how to get my fsmpn running in 10.10 or figure out why my my Server.app on the MDC won't create the auth_sect file. I read somewhere that within the Xsan screen in the Sever app it should show the Authentication Secret, but I do not see this on my Xsan screen. Should it be there and if so is this where my problem steams from? Any thoughts? Thank you so much!

Time Machine backup volume will not mount

Once I goy Time Machine up and running over almost two years ago, I have had little cause for concern. A few lengthy backups here and there but I have been able to restore without any problems whatsoever. It has been extremely useful many times.
A couple of days ago, I noticed that the backup volume was not mounted (I backup to one of my four internal drives) and launched Time Machine. I got the error:
The storage location for Time Machine backups can't be found.
When I run Disk Utility the generic disk icon is in the left hand pane but not the volume. None of the tasks are available except Erase and Partition - there is no option to Verify Disk, Repair Disk, Verify Disk Permissions or Repair Disk Permissions.
According to my logs, the last backup at 18:12 on 20th November was successful. I didn't notice that the volume had not mounted the until the next day.
I'm very concerned that I have lost almost two years of data security. Is there any way I can repair the disk or recover the backups?
Thanks.

If Disk Utility can't see any partitions, it's not good.
First, turn TM off.
Then try ejecting, disconnecting and powering the drive off for a few minutes, then reattaching it. Then try again with Disk Utility. If still no help, the drive is likely dead.
There's a very small chance that +Disk Warrior+ (version 4.1.1 or 4.2 only), or another heavy-duty disk repair app can fix it, if you already have one. But I wouldn't suggest spending the $$ for one unless you think you'll need it in the future -- DW is about $100.
Most likely, your disk is dead. There's a small chance that a +Data Recovery+ app such as +Data Rescue+ can recover some of the data. Check via Google, VersionTracker.com, or MacUpdate.com for +Data Recovery.+ There are services and apps, none cheap. Some of the apps have a free demo or test mode that will tell you if there's anything that can be recovered, and perhaps actually recover a single file; then you pay for it and recover whatever else can be recovered. You'll need another external disk to receive the recovered items.
You won't get the normal Time Machine folder structure, though, just "raw" files. Even if you do recover files, you'll most likely have to figure out what goes where and copy them to the right places manually.
So I'd suggest immediately getting a new drive and doing a new TM backup to it, so you have something. Put a second partition on it that you can use for the recovered files if and when you do that.
If those are your only backups, I'd recommend getting a second external, perhaps a portable one, and using CarbonCopyCloner or SuperDuper to make a full "bootable clone" to it, then take it to your safe deposit box, workplace, relative's house, or other secure location. And/or, you might want to look at Mozy, Carbonite, or other online backup services.

Volume will NOT mount

We have much the same issue as others here in other threads have spoken about - after a reboot a raid volume will not mount.
Disk Utility can 'see' the drive and array, but will not mount it. RAID Admin reports no problems. I tried updating the firmware to no avail.
Then I tried a new FC card in the server, a different controller card in the xRAID, different cables and connecting the FC cable to a different XServe. No mount with any of these attempts.
XServe 2 ea 2.3Ghz G5, 2GB RAM, 1 80GB drive (cluster node config)
OSX Server 10.3.9
7 ea 180GB drives, RAID5; 1 TB array
RAID Admin 1.5 (controller firmware - now: 1.5/1.50f)
Any ideas what to try next? And no we don't have 100% backups, close but no... ;-( so any ideas worth trying appreciated!
Tks, Mark

Mark,
We recently had a similar problem. We have an XServe RAID fully populated -- split into 2 volumes. One volume would mount the other would not (after a reboot). Tried swapping fibre channel cables, re-seating fibre channel cards, etc. Our solution was replacing the PCI-Fibre card in the XServe.
Another thing we have had happen is, after reboot, one volume mounts and the other mounts about 15 mins later -- after completing fsck.
Hope this helps.
--Bonnie

Our XServe-RAID volume does not mount anymore...

Our XServe-RAID volume does not mount anymore.
On /var/log/system.log I could find the following.
Feb 22 09:52:29 ogre kernel: jnl: open: journal magic is bad (0xf433f != 0x4a4e4c78)
Feb 22 09:52:29 ogre kernel: hfs: early jnl init: failed to open/create the journal (retval 0).
It appears the the journaling is badly screwed.
I tryed to disable the journaling with no success.
Here is what I get.
ogre:/var/log root# diskutil disablejournal disk2s3
The selected journaling request does not appear to be valid
After some googling I foud this :
--- QUOTE ---
The more serious problem occurs when the contents of the journal file are corrupted in such a way that the operating system does not proceed to mount the volume. Fortunately, this problem is extremely rare (I have seen three reports of corrupted journal files at the MacFixIt Forums and Apple Discussion Forums since journaling was introduced).
Starting the journaling process is one of the first things that happens when a volume is recognized by the operating system. There appears to be no way to intervene in single-user mode before the journal file is examined. A message about �bad journal magic� appears. Unfortunately, every tool that can turn off journaling requires that the volume already be mounted.
If the Macintosh can boot under Mac OS 9, dealing with a corrupted journal file involves restarting under Mac OS 9 and using a utility (such as our free TechTool Lite 3.0.4) to make visible these two invisible files at the root level of the volume:
/.journal
/.journalinfoblock
Once these files are made visible, they can be deleted. Mac OS 9 does not support journaling, and recognizes nothing special about these files. Neither of these files can be seen in Terminal or in single-user mode in Mac OS X, because they are considered part of the disk directory.
If the Macintosh cannot boot under Mac OS 9, but the drive has Mac OS 9 drivers installed, the drive can be put into a Macintosh that can boot under Mac OS 9, or an ATA/IDE drive can be put into a suitable FireWire enclosure.
The possibility that you may need to remove these two journaling files under Mac OS 9 is a good reason for making sure that all volumes you use have Mac OS 9 drivers installed. The drivers must be installed when the drive is formatted.
--- [END] QUOTE ---
Well, my disk is part of a RAID 5 matrix.... so the solution proposed does not work.
Does any one of you has any idea ?
XServe Mac OS X (10.3.9)

I've seen an article about volumes not mounting and was wondering if this relates to your problem;
http://discussions.apple.com/thread.jspa?messageID=1239224&#1239224
The thread doesn't refer to journalling but may be of use?
HTH

Hi, I need help my computer is not starting up at all, nothing happening when I press the button on/off. The battery charger is working as using it for another laptop. Not sure what to do. Anyone have any idea? many thanks

Hi, I need help my computer is not starting up at all, nothing happening when I press the button on/off. The battery charger is working as using it for another laptop. Not sure what to do. Anyone have any idea? many thanks

You could try a SMC reset:
http://support.apple.com/kb/HT3964
If no change, do what Allan advises.
Caio.

I have updated my iphone this evening and is has asked me to connect my phone to itunes, I connected it to a computer with itunes and it says it needs restoring? and all my images etcwill be earsed I need help as I have not backed my iphone up previously

I have updated my iphone this evening and is has asked me to connect my phone to itunes, I connected it to a computer with itunes and it says it needs restoring? and all my images etcwill be earsed I need help as I have not backed my iphone up previously please help?

YOur phone is in recovery mode, any data that was on there is already gone, you will have to restore your phone and use whatever backup you to restore to.

Hi I need help ..I do not know how to edit a pdf file that I scanned in,

Hi I need help ..I do not know how to edit a pdf file that I scanned in, will someone please tell me what I should do PLEASE HELP

What program are you using? If it is just Adobe Reader you can not edit.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Hello,I need help.ipad 3 does not support flash media player.which player must I download instead of flash media player?

Hello,I need help.ipad 3 does not support flash media player.which player must I download instead of flash media player?

Flash is not supported on the iPad - and as Adobe have announced that they are stopping development on all mobile versions of it, it probably never will be.
Browser apps such as Skyfire, iSwifter, Puffin and Photon 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store.

Need help with Mac & PC not recognizing external drive (disk not readable)

I am having trouble getting my computer(s) to recognize my Seagate External Drive.
Have tried on my MacBook, iMac, 2 Mini's & my roommate's PC and all reveal the same issue: The Disk you inserted was not readable by this computer.
MacBook/iMac both are working off of Leopard
Both Mini's are on Tiger
It won't show up in finder, rendering it unobtainable. I need to get the information if at all possible off of this hard drive (very important!!) so any help I can get would be greatly appreciated!
It allows me to go into disk utility where it shows up with this information:
Name : ST316002 3A Media
Type : Disk
Partition Map Scheme : Master Boot Record
Disk Identifier : disk4
Media Name : ST316002 3A Media
Media Type : Generic
Connection Bus : USB
USB Serial Number : 3LJ07T540000
Device Tree : /PCI0@0/USB7@1D,7/@4:0
Writable : Yes
Ejectable : Yes
Mac OS 9 Drivers Installed : No
Location : External
Total Capacity : 149.1 GB (160,041,885,696 Bytes)
S.M.A.R.T. Status : Not Supported
Disk Number : 4
Partition Number : 0
And it is in the "about this mac" section with this information:
Seagate Mass Storage:
Capacity: 149.05 GB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk4
Version: 0.00
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Seagate
Mac OS 9 Drivers: No
Partition Map Type: MBR (Master Boot Record)
Product ID: 0x0500
Serial Number: 3LJ07T540000
S.M.A.R.T. status: Not Supported
Vendor ID: 0x0bc2

Additional info:
on the disk4s1 info in disk utility, this information is seen:
Name : disk4s1
Type : Volume
Disk Identifier : disk4s1
Mount Point : Not mounted
Connection Bus : USB
Device Tree : /PCI0@0/USB7@1D,7/@4:1
Writable : Yes
Capacity : 149.0 GB (160,022,790,144 Bytes)
Owners Enabled : No
Can Turn Owners Off : No
Can Be Formatted : No
Bootable : No
Supports Journaling : No
Journaled : No
Disk Number : 4
Partition Number : 1
so it looks like a whole lot of no's that need to be turned around! I can't understand why it won't be read by either Mac or PC with all of this, or how I can fix it

XServe RAID volume does not mount

Without any modification to the system, a panic log from our XServe indicates:
"Thu Jan 18 17:28:58 2007
panic(cpu 0): HFS: corrupt VH on PBSRaid1, sig 0x4100, ver 0, blksize 0"
The volume PBSRaid1 does not mount anyway from that date.
Diskutil reports:
"Verifying volume “disk2s3”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid extent entry
The volume PBSRaid1 needs to be repaired.
Volume check failed."
DiskUtil is unable to repair the volume.
My configuration is:
XServe bi-G3 1GHz, MacOSX Server 10.3.9
XServe RAID with 5 disks RAID5 on the left side (OK) and 4 disks RAID5 on the right side (the bad volume)
All the controls are "green" and nothing wrong appeared in the events log obtained via RAID ADmin.
Any suggestion to repair are welcome, as we have many data from confocal microscopy on that volume.
Thanks
Jean-Pierre
XServe bi G3-1GHz (oct 2003)+ XServe RAID Mac OS X (10.3.9)

Right, Dave.
DW 4 rebuilt a preview folder which contains all the files in correctly named folders.Only 3 files among thousands has been saved in a Rescue folder !
It also restored the right volume label, lost in DiskUtil, fsck, pdisk and others.
Very nice tool.
While DW was building its preview, the disk 9 lighted red and a lot of failures of the controler 2 appear in the events log of the XServe RAID.
At this time, the RAID is rebuilding with our spare disk.
I think we have to change both the disk 9 and the controler 2 despite it lights green currently.
Jean-Pierre
XServe RAID (2003- 5xIBM 180Go RAID 5) +(2005 -4xHitachi 250Go RAID5) Mac OS X (10.3.9)

Need help - N9 camera does not respond

The Nokia N9 does not alow taking photogrpahs indicatng that "Can't use the camera while you are connected to your computer". I have disconnected the usb cable from the computer using the normal procedures. Need help to get this corrected.

Hi, Buddhimarambe. Welcome to the Nokia Support Discussions! Have you tried to reboot the phone? Press and hold the power key for at least 8 seconds. To switch your phone on again, press and hold the power key. If the issue remains, you can try to restore the phone's default settings:
1. End all active calls and connections.
2. Select settings icon and Reset > Restore settings.
Note: After restoring the original settings, the phone switches off, and then on again. This may take longer than usual. Also, this will not affect your personal data. Let us know the outcome.

Need help - Error: MDN is not found (code: 33)

Whenever I open my Verizon Cloud it says "Error: MDN is not found (code: 33). I NEED HELP! This phone has to be sent back soon becuase I got a replacment. HELP HELP HELP
I have a galaxy s3
Subject line edited into post.
Message was edited by: Admin Moderator

Make sure both phones (iPhone, Moto X, Droid X, Samsung Galaxy, Nokia, Motorola) are connected to the same wifi .. on the new device you will first have to download and install the updates by going to Settings >> About Device >> Updates. Once the updates have been installed you will not receive the error "MDN is not found (code: 33). You can proceed to pair the devices and transfer your content. It will also give the option to select the type of content (contacts, photos, video) you want to transfer.
Thanks www.strongpurpose.com for helping find this solution .. they made it easy for me to get my content transferred so I can get back to the important stuff .. Follow Your Passion!

All Shared Volumes Do Not Mount

I have setup personal sharing across a wireless network and three Mac laptops. They all connect, but all the volumes from one Powerbook (a Smartdisk 250Gb Crossfire drive used to store music and photos) do not mount. The other Smartdisk Firelite shows up across the network. Problems printing, but that's probably a different question.

McGilli wrote:
I only have my ADMIN account on the Air... not using the Guest account. it is like this on both machines....
Hmmm - on my iMac i get an icon on my desktop - a picture of a drive with 3 people holding hands on it. It goes right beside my time machine, and external hdd icons...
The air doesn't get anything new on the desktop even after it mounts it in the device ...
attaching an external drive brings up a desktop icon on the Air.
I don't mean the login Guest account. When you log into a remote computer, if you do not click, "Connect as" and login with a regular account you default to a guest-like account.
If that is the case, click "disconnect" in Finder and then "Connect as" You should get a popup login window for the other computer. Otherwise you have limited privileges on the remote machine.

Helpdesk Agent Needs help with JAVA applet not loading for HTTPS site

Sorry....I am posting here as I do not know where to start.
JAVA Console Message. The applet runs via HTTP URL but will not load via HTTPS. Any idea would be much appreciated.
load: class com.ebreviate.auction.applet.TickerTape.class not found.
java.lang.ClassNotFoundException: com.ebreviate.auction.applet.TickerTape.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
Exception in thread "Thread-7" java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletException(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletStatus(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Exception in thread "thread applet-com.ebreviate.auction.applet.TickerTape.class" java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletException(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
load: class com.ebreviate.auction.applet.graph.LineGraph.class not found.
java.lang.ClassNotFoundException: com.ebreviate.auction.applet.graph.LineGraph.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
Exception in thread "Thread-6" java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletException(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletStatus(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Exception in thread "thread applet-com.ebreviate.auction.applet.graph.LineGraph.class" java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletException(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

I am repeating the question that RHM submitted...has anyone found a solution to this issue...Applet com.pogo.client.jvmtest.applet started. I was not having a problem and then out of no where on Sept. 13 my game rooms failed to load and this message started appearing. I have done everything asked of me to clear files both Internet and Java, to uninstall, re-install, etc...nothing works. Does anyone have an answer for a very non technical user?

NEED HELP Xsan volume is not mounted (strange problem)

Similar Messages

Maybe you are looking for