Need in-call timer option and per contact ringtone...

Hello Members and guests,
I was using N 2300 which had those 2 facility mentioned in subject. Even though 6150 is 3G phone, it lacks them. I am currently using V04.10/21-12-2006/RM-200 firmware. Is there any way to get them on this 6150?. Any newer updates from Nokia for this?
I think Nokia could have retained the basic facilities of N2300 as a standard accross all the models. Can this be done in any new releases from N6150?
Rgds
CA

Please be aware that the discussion baords are a user-to-user troubleshooting forum. If our mambers are unable to assist with your question, and you require a response from Nokia directly, you should contact Nokia Care by telephone or e-mail - see the Nokia web site in your country or region for contact information.
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

Similar Messages

  • If i delete all content and settings will i need to call my carrier and reactivate my phone

    If i delete all content and settings will i need to call my carrier and reactivate my phone ... help?! please

    No.

  • Auto call timer announcement and cut off

    I have been asked to come up with a comms solution for detention cells, where the detainee has the right to make a 30min call to their legal rep. The system would ideally announce at the start of call "your call is limited to 30 mins", then after 28 minutes announce "you have two minutes left" and then announce "you have reached your time limit" and disconnect the call.
    Can this be done on UCCX with a controlled transfer, and if so, does anyone have a script? Does anyone know of a commercial application which would do this?

    Please be aware that you are not communicating with Apple when you post in these forums. These are user-to-user support forums, so in almost all cases the only people who will reply to your posts are, like me, your fellow users.
    As to your issue, there is no way to bypass the security questions, so you will need to reset them:
    How to reset your Apple ID security questions
    Go to appleid.apple.com and click on the blue button that says 'Manage Your Apple ID'.
    Log in with your Apple ID and password. If you have forgotten your Apple ID password, go to iforgot.apple.com first to reset your password with a password recovery email.
    Go to the Password & Security section on the left side, and click on the link underneath the security questions that says 'Forgot your answers? Send reset security info email to [email]'.  This will generate an automated e-mail that will allow you to reset your security questions. 
    If that doesn't work, or  there is no rescue email link available, then:
    click on 'Temporary Support PIN' that is in the bottom left side, and generate a 4-digit PIN for the Apple Account Security Advisor you will be contacting later.  
    Next, go to getsupport.apple.com. If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services'.
    Choose 'More Products & Services', then 'Apple ID'.
    A new page will open.  Choose 'Other Apple ID Topics', then 'Forgotten Apple ID Security Questions'.
    Click the blue 'Continue' button.
    Select the contact option that suits your needs best.
    The above information quoted with gratitude from TJBUSMC1973, another user in these forums.
    Regards.

  • Jabber for Windows Call Voicemail Option Pulls Outlook Contact with Matching digits of VM Pilot

    Running J4W 9.2.2 and when we use the "Call Voicemail" option (we use a 4-digit pilot number), if the end user has an outlook contact that the last 4 of the phone number matches it pulls the outlook contacts name up and displays it in the connected call.  Anyone else seen this behaviour and f so is this a known issue and is there a workaround for this?
    Thanks,
    Ethan                  

    I Ethan,
       I have this problem too. There was a Bug (CSCud57201) identified for release 9.1 with this problem. The bug notes say it should be solved on 9.2 but I'm running the same version as you and having exactly the same last digits match problem
    Rui

  • I need help understanding export options and optimizing for web

    I have been using FCP X for a short while now and have a pretty good grasp on the editing capabilities. What I'm having a horrible time figuring out is the export/share options. The videos I create are typically approximately 1 minute in length and get posted to a web site (we have our own CMS and video player so I'm not using YouTube or Vimeo or anything like that). In order to post them I need them to be MP4s and then I have to create .webm and .ogv files. The source material I work with is generally great, high quality stuff, so I end up with very large output files from the initial FCP share master file options.
    When I use MPEG Streamclip to make my MP4s I end up with files that are still quite large and I can't seem to ever get the file size manageable without losing tons of quality. I do not have Compressor, though if that will solve my problem I will put in for the expense of it. What I'm trying to understand is what sorts of settings I should be trying out to get my file sizes to be manageable without completely compromising my quality. And I know this can be done, because the company I work for pays for a great quantity of video work each year (from an outside production firm) and the clips provided are beautiful in quality and small in file size -- for example, I recently worked on a video and got it into the 40MB range before quality went to crap, working off the same material the production company we do work with had theirs down into the teens and looking beautiful!
    To throw an even greater wrench in the works, I am working off a mac. But when my boss, on a pc, saves the mp4s I create (raw files -- not what is posted to the web) locally on his machine and views them from there the sound is always off a tad and the people in the videos look like they're lip synching.
    Any advice on either of these is MUCH appreciated. I've been trying to figure this out properly for months, and only today decided to stop seeing if someone else had the same question and just post my own.
    Bronwyn

    Thank you Karsten, this was helpful I have utilized the Quality slider and the frame size options before though with limited results. I've never messed with the Limit Date Rate option as I don't know what I'm doing with it, I see you put 5Mbps. Is that a typical setting that I could use?
    Using stream info, here's info on my original source file:
    Stream: Charles_0023_2.mov
    Duration: 0:00:51
    Data Size: 96.51 MB
    Bit Rate: 15.77 Mbps
    Video Tracks:
    H.264, 1920 × 1080, 29.97 fps, 15.64 Mbps
    Audio Tracks:
    MPEG-4 Audio stereo, 48 kHz, 127 kbps
    Stream Files:
    Charles_0023_2.mov (96.51 MB)
    As a comparison, here's the info on a similar clip that the company we sometimes use created:
    Stream: Charles_0019_4.mp4
    Duration: 0:00:49
    Data Size: 4.66 MB
    Bit Rate: 0.80 Mbps
    Video Tracks:
    JVT/AVC Coding, 710 × 400, 29.97 fps, 635 kbps
    Audio Tracks:
    MPEG-4 Audio stereo, 48 kHz, 162 kbps
    Stream Files:
    Charles_0019_4.mp4 (4.66 MB)
    I'm fine with bringing the frame size down some and modifying the limit data rate, but sometimes I feel like I'm forcing my video into something it's not and the quality suffers -- this is where my understanding of video work breaks down LOL. Any suggestions of how I can get my .mov into something like the the .mp4 above?
    Also have you had any experience with mp4s not playing back properly on pcs?
    Again, thank you!
    Bronwyn

  • Please i need some help time capsule and airport express wireless extender

    hello everyone and thank you for looking at my post. i do need some help. i am not very good at the computer programing so i might not use the right terms. i have a time capsule that i just replaced an old pc type router with. i have a fairly large house and can not get wireless signal to the one end of my house. so i went to the apple store and bought an airport express after being told how its just plug and play and itll setup with my time capsule and waala iv just extended my wireless signal. well it did not seam to work that well for me. i have done all the setting up that was told me to in the book to do and i still have get to get a wireless signal out of the express i then hooked up an ethernet wire from the express to my girlfriends macbook. and what do you know now im seeing the express in my airport utility. but then i unplug the ethernet and im back to not seeing the express. what am i doing wrong and what do i need to do. please help me if you can. thanks alot.

    Hello fastuca. Welcome to the Apple Discussions!
    Let's double-check your base stations' settings ...
    o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
    o Open AirPort Utility and select the Time Capsule (TC).
    o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
    o Click AirPort in the toolbar, and then click Wireless.
    o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
    o Next, select the 802.11n AirPort Express Base Station (AXn) that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
    o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
    o Enter the base station network and base station password is necessary.
    o Click Update to update the base station with new network settings.
    (ref: Page 46 of "Designing AirPort Networks Using AirPort Utility)

  • CS6. Need to have time remapping and warp stabilizer work together.

    This should be obvious for most people. These two effects must be made to work together.
    If you're shooting with a glider you're usually moving very carefully (read: slower than normal) so the footage in post would need to be sped up plus stabilized a bit.
    Currently warp stabilizer and time remapping cannot be applied at the same time. But I *need* it to be applied at the same time. I need a workaround.
    Should I:
    1. shorten the clips, export them, re-import them into the project, and then apply stabilizer?
    2. apply the stabilizer, export them, re-import them into the project, and then shorten them?
    How do I export individual clips as just seperate clips while Premiere? Do I have to drag them into an empty timeline one by one, apply the stabilizer/remapping, and export, remove the clip, put in the second clip, etc all one by one?
    I've used Mercalli in the past and I time remap the footage and then apply Mercalli to the accelerated clip. Mercalli doesn't mind a bit.

    ComputerNovice25 wrote:
    Adobe might have written the code in a way that doesn't include the ability to deal with that extra variable. I'm assuming that when it's nested it then makes the timeline it's in just read it as a normal clip again instead of a clip with a non-supported variable included.
    Although I'm totally just guessing, but if what I'm saying is correct it would mean a fix wouldn't be very much work at all. Which means in the future they could simply provide a quick and easy patch to fix this. I'd highly suggest to make a feature request.
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    Does Adobe read these feature requests? I often have a hard time justifying spending time to type out something when I feel like it's just being thrown into a black hole. I'm sure the team gets thousands of feature requests. It's like the lottery. Statistically you will never win. Sure, you'll never win if you don't play, but it's still a waste of time to play. I know, I'm pessimistic. Just don't have much faith in conglomerates - although Lightroom 3 is by far the most perfect program I have ever used and I would kiss the LR3 team if I could.
    With Lightroom, Photoshop is hardly needed anymore unless absolutely necessary or for truly intensive chop-like edits. Premiere DESPERATELY needs a Lightroom equivalent.
    I have half a mind to guess (nicely) that you video guys have absolutely no idea what you're missing out on, workflow-wise. It's life-changing. Literally.
    I'm doing a video right now and I can't stop thinking about how if I had a Lightroom workflow, this video consisting of 40 clips, 40 titles, 40 transitions, audio tracks could be on the way to final export in 5 minutes. 5 MINUTES. And be 100% as good as if I had to spend an hour doing this in traditional Premiere.

  • Need help with Time Stamps and saving Strings in Excel

    Hi, Am learing LabView now....and my task is
    Everytime start button is pressed, a Random number must be generated.
    The Random number is to be staroed in an Excel sheet such that the Random Number is in the first column and Time at which it was generated in the second column...
    I used to work with Agilent Vee before and am finding it hard to adjust to LabView
    Thanks
    Sanjay

    Am making the same mistake again......
    Here yougo in LV 8.5 version....
    The best solution is the one you find it by yourself
    Attachments:
    Time Number.vi ‏12 KB

  • New user needs help with time machine and mac server.

    I am a new mac user and got a new mac mini running server.  I have time machine enabled on the server and a back up folder created.  My macbook will not see the server when trying to set up time machine from the macbook.  What am I missing?  Thanks.

    Unfortunately even though Apple had touted the AEBS USB2 HD use with TimeMachine (TM) they pulled it from the Leopard TM feature list about 1 week before releasing Leopard GNBuild 9A581.
    At this time Apple does not support use of the AEBS USB HD for use TM.
    I strongly suspect we will see this feature return in one of the next two updates Apple releases for Leopard.
    In the meantime be patient and I don't recommend you use a hack to circumvent the current TM limitation.

  • Performance Issue with calling setTextFormat() over and over... Need to temporarilly disable redraws?

    Hello all,
    I am running some code which lets me highlight text bits of text found with regular expression.
    The code I have works fine
    the problem that I am having is that I need to call setTextFormat() over and over again (possibly > 1000 times), and it becomes very slow (possibly because its redrawing over and over).
    When commenting out the line with setTextFormat(), it runs brilliantly fast.
    Is there a way to disable redraws of the textField while I make the changes to the text format, then redraw it manually?
    Any help appreciated!
    The code is:
    // Find the first result
    var pResult:Object = pRegexHighlight.regexp.exec(str);
    while(pResult != null)
        // Highlight the match
        var pTextFormat:TextFormat = new TextFormat();    pTextFormat.color = 0xff0000;
        textField.setTextFormat(pTextFormat, pResult.index, pResult.index + pResult[0].length);
        // Get the next match
        pResult = pRegexHighlight.regexp.exec(str);
    Scott McNaught
    http://www.resultswebdesign.com.au/

    I think you should use a TextArea, and parse the text property. After parsing and adding <font color="#0000FF"></font>, set the result in the htmlText property (but retain the original text in the text property). That way you render once.
    If you don't lie the TextArea border and focus outline set thickness of them to 0.
    If this post answers your question or helps, please mark it as such.

  • Handset losing call logs, texts and emails

    Hi,
    I have an ongoing problem with my BB and am not getting much sense from my network provider (BT Business).
    Here's a bit off history:
    I started the contract in November 2011 with a Torch 9860.  I had numerous problems with the phone freezing and randomly losing data such as texts, call logs and emails.  In 9 months I've had 5 phones and 1 sim card change, 2 weeks ago BT changed the handset to a Torch 9810.
    The phone has worked fine till Friday when it started doing funny things like randomly receiving texts which were from old conversations.  On saturday afternoon it lost all data by way of texts, call logs and emails that were over 24 hours old and in the last hour has lost everything over 6 hours old.
    I have all calls, texts and emails going into the messages list and have that set to save everything for ever so I can chose when to delete information.
    As I;m a consultant I need my call logs, texts and emails to work out my billing so this really is a pain.
    I really do think this is a network issue rather than the handset.
    Can anyone offer any ideas/solutions before I phone BT in the morning?
    Many thanks x 

    That is a very tiny database size. Go into your camera options and see where your pictures are being saved.
    Something is not right. There is no reason your free memory should be so low with such small database sizes and very few apps installed. You should be pushing 200+ MB of free memory.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Add time series and CIF behaviour

    All,
    I need to delete time series and add time series again. What is the impact in a production environment? Do I need to stop CIF etc?
    Cheers

    There is no need to stop the CIF queues when you are deleting and recreating the time series. The data can flow in from R/3 and it will not have any impact on the time series deletion / recreation process.  But in general it is advisable to perform this task  after normal business hours when no business users are logged in and when no other jobs are running.
    This is necessary because if anything were to go wrong you can be sure the problem is because of the time series deletion and recreation.
    Also MAKE SURE YOU BACKUP ALL TIME SERIES DATA  to backup cube before deleting the time series , otherwise you will lose all your data as soon as you delete the time series .  In general time series is deleted only when it is absolutely necessary since it is considered a very critical process .
    Thanks
    Saradha

  • WPA security with both time capsule and airport express not working together

    I want to set WPA security on my time capsule so that my teenager can not access wireless with out permission but when I add a security key my airport express disappears from list.
    I have tried setting a password then the time capsule restarts and when it does the aiport express is gone from list and can not be found when rescanned.
    Do I need to set time capsule and then reset airport express by pluggin it directly into desktop and resetting its software?
    Thanks

    I would suggest, reconnecting the Express to the TC again. Use the AirPort Utility to make ALL configuration changes including the network extending settings. Then restart both base stations and check that the settings are still good. Then disconnect the Express and give it a few minutes to initialize. It should connect. If not, then the issue may be either the distance or obstructions (like walls, ceilings, floors, etc.) that is preventing the Express from getting a signal from the TC that is adequate enough to extend.

  • I need IMEI number, make, model and memory size of phone for insurance claim

    Hi Xanadu,Thank you for the info.What the insurers have asked for though is documentary proof of these details. Ie; something from EE that I can print off and send to them.Any suggestions ?Thanks

    Hi,
    Basically your insurers are trying to fob you off and are implying they don't believe you own the phone as who keeps this information?!?!
    You need to call your insurers and ask them to arrange a "three way call" with EE and you and then they can ask EE all the questions they want. If they again fob you off (which is likely) tell them you want to complain and intend to escalate this issue to FOS  http://www.financial-ombudsman.org.uk/   (this costs them £550 if you complain to the FOS) and then they will have to refer your case to complaints who will likely be the actual insurer/underwriter and then you will get your claims dealt with.
    Hope this helps.

  • On Call Time Entry Vs Overtime Entry in ESS

    Hi Experts,
    1) I want to know the difference between On Call Time Entry and Overtime Entry in ESS.
    2) Whether we can enter On Call Time Entry using SAP EP ESS.
    3) Whether Manager can approve On Call Time Entry using SAP EP ESS/MSS/UWL.
    Regards,
    Gary

    ...

Maybe you are looking for