Need internal register info and map for PCI-6036E

I'm going to be using NI-PCI-6036E Data Acquisition cards using a hard real time extension package for Windows. As a result, we will have to write a driver for the 6036E cards to access them in real time. Consequently, I need a map of and information on the internal registers e.g. a programming model. and the PCI vendor ID and device ID

I would definitely recommend that you download our Measurement Hardware Driver Development Kit (DDK). This is a free download from our website, and can be found at www.ni.com or at the following direct link.
NI Measurement Hardware DDK (Driver Development Kit)
http://sine.ni.com/apps/we/nioc.vp?cid=11737〈=US
This kit provides development tools and a register-level programming interface for NI data acquisition hardware. This works with E Series devices, including the 6036E.
For questions specific to the DDK, please leverage the discussion forum catageory "Driver Development Kit (DDK)."
Best Regards,
Justin Britten
Applications Engineer
National Instruments

Similar Messages

Data from a file need to be read and mapped into a custom table of R/3

Hello all,
This is related to inbound to SAP ECC via SAP PI.
There is a requirement concerning PI part that data from a file need to be read and mapped into a custom table of R/3.
To have this scenario developed , do we have any other option than the Proxy ?
My understanding is as follows : File --> SAP PI --> Proxy
You suggestions are welcome.
Regards,
Rachana

Hi Ravi,
As suggested by Inaki, you can use proxy communication in recever.
but you can also use the below
FILE -----> PI -------> PROXY
RFC
IDOC
to communicate to ECC system.
Regards
srinivas

Why does siri only have business and maps for U.S and not Ausstralia?

why does siri only have business and maps for U.S and not Ausstralia?

what does this mean ?
Beta means it is unfinished, not fully featured and may have bugs.
so is it not possible for siri to tell me the weather, and maps and businesses for Australia?
That's correct. Nor will it do it for me in the UK. As it say's in the Siri FAQ I linked to:
"Maps and local search support will be available in additional countries in 2012."

Need to learn forms and reports for 10g

Hi,
I need to learn forms and reports for 10g urgently for windows. Where can I download the software from..........I am a newbie in this field........Thank you.......

Big red button - top right
(Didn't someone say just the same thing last week)

Do i need a separate appleID and password for itunes store, icloud and app store apart from my admin login and password?

after having my mbp upgraded with new m.lion by apple tech service i noticed that applications like iphoto, garageband and imovie are gone
researched online and was told that i had to acess the `purchase` via AppStore where it asks me to log in with Apple ID and password
i used the usual admin login and password and didnt work, also on itunes and icloud the similar case
do i need to register with a separate appleID and password for itunes store, icloud and app store apart from my admin login and password?

Just use the same Apple ID and password that you used to access this forum - that's your Apple ID.
The user name and password on your computer has nothing to do with your Apple ID.
Good luck,
Clinton

Data Type, Message Type and Mapping for FTP

Thanks in advance for your replies.
As our first production XI scenario, we need to move several (at least 46) files from our SAP instance to a couple of different servers to support our legacy systems. Once all locations are on SAP this requirement should go away.
I only want to pick up the file from the one server and place it on the other and this leads me to some questions.
How do I define the Data Type and Message Type for each of the files? Do I need to consider the size of the record in each interface and create DT/MT with different sizes.
Do I need a mapping program that simply maps one structure to the other?

I recently completed a similar exercise.
It looks like this...
server1 ftp (Sender - delete file) - XI - Server2 ftp (receiver - create file). This will move the file from one server to another.
I used the same schema and mapped fields on a one to one basis.
The Size of the files I process are between 6kb and 500kb each, but the mapping/fields remain constant, just the numebr of items change.
Worked seemelessly for the last three weeks (since go-live)

Surrogate Key and Map for Cube

Hi
I am new to Data Warehousing and am trying to use OWB 11g.
I am trying to create dimensions with multiple levels. When I create more than one level it need to have surrogate as well business key for each dimension level. But I can create only one surrogate in the dimension, there is no option to create multiple surrogate keys in the same dimension. so what am I missing?
My second question is regarding cube. Do I need to create a Mapping for a cube? if yes, should I move the data to the cube from the dimensions? and where will the measures come from? do i need to load the measures or they will be calculated automatically?
please reply...
regards
Arif

hi
Got it, Yes that was the reason,
The table was not properly deployed after the dimension was modified.
Anyway, the describe of the table is as follows
describe arif.QUESTION_DIM
Name Null Type
DIMENSION_KEY NOT NULL NUMBER
IGV_ID NUMBER
PER_ID NUMBER
DIM_ID NUMBER
IGO_ID NUMBER
INQ_ID NUMBER
ID NUMBER
DIM_ORDEM NUMBER
DIM_AMBITO VARCHAR2(3)
DIM_NOME VARCHAR2(150)
10 rows selected
Now, I am having another problem,
when, I deploy the Map to load the data from three different tables, it gives the following problem
Name               Action               Status          Log
QUESTION_MAP          Create               Warning          ORA-06550: line 297, column 25:
                                        PLS-00302: component 'ID' must be declared
QUESTION_MAP          Create               Warning          ORA-06550: line 1153, column 11:
                                        PL/SQL: SQL Statement ignored
QUESTION_MAP          Create               Warning          ORA-06550: line 1155, column 15:
                                        PL/SQL: ORA-00904: "QUESTION_DIM"."ID": invalid identifier
QUESTION_MAP          Create               Warning          ORA-06550: line 1155, column 31:
                                        PLS-00302: component 'ID' must be declared
QUESTION_MAP          Create               Warning          ORA-06550: line 233, column 1:
                                        PL/SQL: SQL Statement ignored
QUESTION_MAP          Create               Warning          ORA-06550: line 2539, column 11:
                                        PL/SQL: SQL Statement ignored
QUESTION_MAP          Create               Warning          ORA-06550: line 2541, column 15:
                                        PL/SQL: ORA-00904: "QUESTION_DIM"."ID": invalid identifier
QUESTION_MAP          Create               Warning          ORA-06550: line 2541, column 31:
                                        PLS-00302: component 'ID' must be declared
QUESTION_MAP          Create               Warning          ORA-06550: line 297, column 9:
                                        PL/SQL: ORA-00904: "QUESTION_DIM"."ID": invalid identifier
Edited by: user643560 on Oct 22, 2008 9:38 AM

What database should i use for a flash application which i need to record score and name for a scoreboard.

Hi. I wrote down the summary of my project so that you can
understand and answer me more easily:
I have to build an application (a little flash game) in which
I record the number of clicks. I want the player to choose a nick
at the beginning and when he finishes one or all the four choices
of target, i want the application to write his nick and final score
in a database for displaying in a scoreboard (hall of fame). All
the new entries should be sorted according to the score. If the
same nick appears again, it's final score will be modified in the
scoreboard only if is higher then the previous.
I was thinking of creating a variable for the name that is
chosen at the beginning and a variable for the score that is
recorded. When the player finishes the game i want the application
to write his data in the database, and then to display the
scoreboard (let's say top 10 players in the database from the
highest to the lowest score).
I never did this before so i am asking what database shoud i
use? I need a programmer to create one for me? Or can flash
generate the database?
Is the variable the good way or should I aproach the problem
by other means? And if a programmer creates a database in MySql is
that good or he should convert it to XML, or Flash generates the
XML?
Thank you.

I did areal photography one time. What you have listed would not be on my short list for lenses to take at all.
Maybe you could supply a little more info of the 50-100mm ? I am going to guess you have the first version of the Canon EF-S 75-300mm? It is a faily slow lens but if these two are the only possibility, I'd choose it.
It and the XTi will work as a mattter of fact I took two XTi's on my flying photo experience. But I had the fantastic EF 70-200mm. Another thing, there is NOT a lot of room on these aircraft.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7

Need help to open and look for file by name

Hi,
Im needing help to open a folder and look for a file (.txt) on this directory by his name ... The user ll type the partial name of file , and i need look for this file on the folder , and delete it ....
How can i look for the file by his name ?
Thx =)

Hi ,
Sry ,, let me explain again ... I ll set the name of the files in the follow order ... Name_Serial_date_chanel.sxc ..
The user ll type the serial that he wants delete ...
I already figured out what i need guys .. thx for the help ^^
I used List Directory on advanced IO , to list all .. the Name is the same for all ... then i used Name_ concateneted with Serial(typed)* .. this command serial* ll list all serials equal the typed , in my case , ll exist only one , cuz its a count this serial .Then i pass the path to the delete , and its done !
Thx ^^

Do we need both management Pack and ADP for monitoring SOA suite 11g

Hi,
Do we need to Both management pack and ADP (OCAMM) Application Dependancy and Performance for monitoring SOA Suite 11g.
I was creating a monitoring template for SOA Composite and SOA Infrastructure and wanted to know if I need to install additional ( management packs, ADP and Middleware Plugins ) packs to get an effective template.

A management pack generally refers to the set of pages in EM Grid/Cloud Control which provide functionality for a given set of target types. Since EM Grid Control 11g, the ADP functionality has been part of the Grid Control release and the pages licensed via the Management Pack Plus for SOA or the SOA Management Pack EE.
To populate the ADP pages with data, additional steps must be performed in order to deploy an ADP manager and ADP agents. Doing this is optional, depending on whether or not you require the additional capability that those pages provide.
ADP data, however, are collected and stored separately from the core GC/CC metrics and are not related to the monitoring template functionality.

I need more midi in and outs for logic 8!

I did a google search but couldn't find anything.
I am looking to expand the midi ins and outs when using logic 8. I have a macbook pro hooked up to a rme fireface 800 and I need more midi ins and outs.
I've heard about these unitor devices but wil they work with logic 8? I heard there are different versions of them as well. I will need one that can sync to SMPTE
Can u buys these new in stores? what kinda devices have you guys used to expand your midi ins/outs in logic 8

Sadly, it seems that the MIDI Express XT was [discontinued|http://www.musiciansfriend.com/product/MOTU-Midi-Express-XT-USB?s ku=706423&src=3SOSWXXA]
Here's the MIDI Express 128 8x8 from [Amazon|http://www.amazon.com/MOTU-MIDI-Express-128-Interface/dp/B0002J1PNK]
I would just go to Sam Ash or Guitar Center and do some 'Midi shopping'.
What you can also do, if you just like to expend your existing Midi, is to look for older (pre USB) midi interfaces on eBay, they are really cheap. You won't need a USB since you are hocking through Midi out/through (from your USB Midi) to 'IN' of the 'expansion' Midi device.

Need to generate *.ecs and *.xsd for EDI 841 data

Hi,
I have an EDI 841 data. I want to generate *.ecs and *.xsd for EDI 841 data using B2B document Editor. Please help me generate *.ecs and *.xsd for EDI 841. Thanks in advance.

Hello,
I have generated ecs and xsd for EDI 841 Specification/Technical Information, send me a test email i will send you the same.
Alternatively you can generate the same from Document Editor as well.
Rgds,Ramesh

Please help. I need to register a new itouch for my daughter but confused about apple id's and getting all her stuff transferred to the new itouch from the old one. Plus I want her to have her own apple Id

My daughter has an old itouch, she uses my apple I'd. I just got her a new I touch, and want to register it, but give her her own apple Id. I just backed up or synced her old itouch to the computer and now I am setting up her new one. If I give her a new apple Id will she then loose all her apps and songs from her old itouch? Please help!! I thought it was supposed to say something like restore from back up or something like that? Maybe that is a next step after I give her her own apple id?

https://register.apple.com/cgi-bin/WebObjects/GlobaliReg.woa [register an Apple Product]
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/createAppleIdForIK B?localang=en_US&path=%2F%2Findex.jspa [create new apple id]
You must be logged in to register an Apple Product
Message was edited by: michael08081

Apple tv says I need to verify info and I sign in and update but no verification email sent

I have been trying to rent a movie for over an hour now. I have updated my new cc info but apple won't send me a verification email. When I try to rent it says verification needed. How do I get apple to send me the effing email? I am sick of calling and searching online and entering info repeatedly. This **** is ********!

Put in a request for another verification e-mail to be sent to you.
Start here, change your country if necessary and go to manage your account.
Also check your Mail rules and filtering, the verification mail may be going to a junk folder or even being deleted altogether.

I need drivers (not upgrades) and apps for Audigy 2 Plati

I have: Fresh install, WinXP SP2, SOYO Mobo (P4X400), Creative Soundblaster Audigy 2 Platinum (driver: 5.2..443)
After installing the drivers from Creatives Website I thought I'd start installing the ap
ps.
However I have not been able to install any of them, no matter the sequence. I receive a "setup did not detect the required components." I have sound, I see the device and drivers in Device Manager.
Please tell me how to get around this "loud" stop error so I may complete the re-installation of my Audigy 2 Platinum card.

) make sure your sound card is snugly in the PCI slot and didn't pop out
2) using the dxdiag utility (Start>Run>dxdiag), use the DirectSound test to test if the sound you're getting is from a software buffer. If it is, you may need to physically reinstall your sound card.
3) make sure that the apps are for your sound card. MediaSource updates sometimes refuse to install if you do not use Creative's update detection utility to find the correct one for your card.

Need internal register info and map for PCI-6036E

Similar Messages

Maybe you are looking for