Need Middleware Technical Document.

hi guys,
I am currently involved in a project which is to transfer order from CRM 5.0 to R/3 4.6 backend system and synchronize customer data in both systems.
Could anyone send me some CRM Middleware Technical Documents to [email protected]
Thanks in advance.

Hai Hui Wang,
Use the best practices of SAP. You need the following building blocks.
CRM Connec tivity,
CRM Replication
CRM Master Data
And use the SAP help. This is well enough if you can use it good enough.
If you are pot aware of Best practices, just browse this link .
http://help.sap.com/bp_crmv150/CRM_DE/index.htm
Go to preconfigured scenarios. Use this extensively .. You will get good knowledge.
Any problem you can contact me at
[email protected]
Best Regards,
Prem chand Kamarapu

Similar Messages

Need CRM Technical Document

Hi All,
I need CRM Technical Document. Anybody there to help me to get this.
Thanks in advance.
email ID: [email protected]
Thanx & Regards,
Santosh

Yes.
Try service.sap.com and help.sap.com and see this - Links to CRM Documentation - thread.
Gareth.

Need of Technical Documents....

Hi all,
This is venky. Hope every one fine. I need a small help. We are working for a Canadian client. This client uses JDE 8.0. Recently he upgraded to 9.0. The issue here is during the running of 8.0 my client had deleted 2 columns from all the tables in all modules(F43,F42,F04 ,F03,F09). As all you know that JDE is under the oracle corp. After we went through the tables in all the above modules we came to know that oracle again added some of new columns in 9.0 version. We just wanted to check what are the new columns were added to table from 8.X to 9.X. Can any one of you provide the documents for JDE for all versions like 8.9,8.10,8.11,8.12 and 9.0. It will be very help to us.. Thanks for the help..
Thanks & Regards,
venky

100 pages of graphics is going to most likely be too large to e-mail. You would have to post them on the web for someone to grab. Sometimes grayscale seems to work better for me, but I don't do enough to know why. B&W is what I generally what I want (and it sounds like what you want), but there is typically a problem with the quality when I do it. You need to probably play with the resolution and such to get reasonable performance. I would suggest 300 dpi. After you save the file, make a copy and try OCR on it. Once the OCR is complete, do a Save as to remove the old stuff. You may then want to go back and view the suspects, correcting as you go. It may be that Acrobat also has already converted some things wrong. You will have to go back and check. Then do one more Save As.
You might then want to save the document as a DOC file or related format. If you have equations, they will probably have to either be retyped or clipboarded from the PDF as a graphic. The OCR would hopefully give you the smallest file size. You can also try using Reduce File Size or the PDF Optimizer to reduce the file size and delete junk that is not needed.

Technical document on P2P & O2C for R12

Hi All,
I need a technical document on Procure to pay cycle and order to cash cycle for R12. In which the process of these cycles and the information about the base tables getting effected by each step is explained.
Thanks

By CDC are you referring to Change Data Capture?
If so, do a search on "Change Data Capture" at http://tahiti.oracle.com, where all the Oracle documentation lives, and you'll get plenty of information. The change data is exposed in a series of tables, so there's no special client-side API-- just querying the appropriate tables & views.
Justin

Issue with automatic numbering of figures in a Technical Document

Hi everyone, thanks for taking the time to examine my issue. Basically I've inherited a Technical Document which was imported from Quark some years ago and badly cobbled together in IDesign by a novice and I'm bringing it up to standard to make it a bit more usable but do need to retain the conventions within it. It was written as a chaptered document so I've set up the 'chapters' as Sections in InDesign so as to allow for page number variables and a decent ToC etc. I'd like to have the diagram numbers (and associated x-references) automated too, but am floundering a bit with this.
At the moment all the image captions are set in one paragraph style throughout the document, and I've been playing with the Bullets and Numbering Dialogue within this paragraph style. All the captions are part of the body text or in their own text frames (As opposed to being linked with image metadata or anything like that).
The manually written image number format in the document reads like 'Figure Chapter number, colon, Image number, and then some have (a), (b), or (c). followed by the name)' eg (worst case) Figure 8:5(c) Sealing the Blahblah Adaptor
I realise I might have to set up a named list for each 'chapter' because I can't find a way to define the numbered list to show me;
'Section number, dot, Image number (starting at one then continuing until the next section starts) dot and then if I need it an a, b, c. etc too'
Not forgetting I have set up the written 'chapters' as Sections in Indesign.
If I try adding the 'section symbol' to the number field in the bullets and numbering dialogue (inside my paragraph style) I just get a weird little blue shape that presumably starts a new section rather than identifies the section I've put it in (so that isn't it) and if i try 'Chapter Number' from the number placeholder menu it only ever says '1' because InDesign only allows one 'chapter' per document (and my chapters are actually sections!).
I do find the coding system for the 'insert special characters or numbered placeholder' really confusing - I'm not familiar with all of them, (and throwing circumflex's and hashtags in doesn't brighten my day) and since I don't know the codes trial and error seemed to be the way forward. How are we supposed to know the codes - is there a list online somewhere?
I could manually type the section number in the 'Number' text box in the dialogue (if I make a named list for each chapter) and lift a layer of confusion but surely there's a way to identify a section in a numbered/named list?
I think I'm really close but it's driving me a bit crazy - I'm sure identifying levels within named lists might be something to do with it, but I can't see how to alter that. Do I need to set up a new paragraph style AND a new named list for each 'chapter' (section)? The alternative could be to split the document up and make a book file so the 'chapters' become real chapters? (I don't want to do this!)
There's also something in RealWorld InDesign that worries me a bit - it says (even if I had it working the way I want) that it might number unthreaded text frames in the order they were created rather than the order they appear on the page? Um...
The other thing is I do have a mixture of inline and anchored objects throughout this document so that might mess things up too?! *Sigh!*
I'm using InDesign 5.5. for Windows. Many thanks for any tips! Hope somone out there is less confused than me!
kind regards
Phil

You're so right!!!
I really liked the idea of writing a book in pages. Have to write a second edition of something and did not want to use Word2008 on the Mac, because after one year it is still an unstable beast (crashes, crashes).
So I checked ot Pages 09 - and alas
* no xreferences
* no automatic numbering of captions, figures, ...
Then I asked my publisher for FrameMaker: The answer was: NO longer on the Mac since 2005. I can't believe this. Not a single decent program to write a book on a Mac.
I don't want to go back to LaTex after 20 years - HELP me somebody
and show me a few (automatic) workarounds how to play the automatic numbering and Xref tricks in pages.
Otherwise it's really neat - BUT - nut for writing documents longer than 20 - 30 pages that need off that book like stuff.

Help scanning technical documents to pdf

Hi,
Newbie using Acrobat 9 standard (updated to 9.1) with new Fujitsu S1500 document scanner.
I need to scan to pdf a number of technical documents -- no color, these are white background (or, at least, should be white -- some are old and a bit discolored), mostly text and some grayscale illustrations/images and electronic schematics.
Been playing with various options -- scanning resolutions, B&W vs Grayscale, and "Optimize Scanned PDFs" (in Acrobat 9.1) for several hours, and not making much progress. The issue is that the scanned documents do not print out as good as the originals.
I am hoping that some Acrobat pro's familiar with document scanning can provide some advice.
My goals:
1) PDF needs to print out as close to original as possible
2) File size optimized for small size as much as possible, as some of the documents will be 100-pages and may need to be emailed.
3) If possible, is there a way to manually clean-up the scans in Acrobat? For example, removing the occasionally spot / mark / staple-hole that shows up in the scan. The PDF Optimizer settings, even agressive, do not seem to remove these marks. Since the background of all of these documents is white, a simple way to "clear" the spots to a white backgound would be perfect.
Any suggestions or best way to approach this project will be appreciated. Thanks.

100 pages of graphics is going to most likely be too large to e-mail. You would have to post them on the web for someone to grab. Sometimes grayscale seems to work better for me, but I don't do enough to know why. B&W is what I generally what I want (and it sounds like what you want), but there is typically a problem with the quality when I do it. You need to probably play with the resolution and such to get reasonable performance. I would suggest 300 dpi. After you save the file, make a copy and try OCR on it. Once the OCR is complete, do a Save as to remove the old stuff. You may then want to go back and view the suspects, correcting as you go. It may be that Acrobat also has already converted some things wrong. You will have to go back and check. Then do one more Save As.
You might then want to save the document as a DOC file or related format. If you have equations, they will probably have to either be retyped or clipboarded from the PDF as a graphic. The OCR would hopefully give you the smallest file size. You can also try using Reduce File Size or the PDF Optimizer to reduce the file size and delete junk that is not needed.

Technical Document (Exact Procedures) To Migrate Forms/Reports 9i to 10g

Hi;
Where can i find the Technical Document (Exact Procedures) To Migrate Forms/Reports 9i to 10g?

This seems to be a common point of confusion. The "FMw Upgrade Assistant" is a utility which helps you to upgrade the entire Application Server installation to a newer version (e.g. 11.1.x). This has nothing to do with your Forms (fmb, mmb, pll, etc) or Reports (rep, rdf, etc) applications. Generally speaking, I would say that using the UA is not necessary and likely should not be used in most cases. Cases where it should be used might include a situation where your previous version has been significantly customized and you don't know how or don't want to make the same customization in the new environment manually. Whether you are talking about a new product (Oracle or not) or even a new OS, generally your best bet is to start with a clean, new installation. Attempting to upgrade an existing version always comes with problems. Just one man's opinion ;-)
As for your Forms application(s), there is a Forms Migration Assistant (FMA), explained in the Forms Upgrade Guide:
http://docs.oracle.com/cd/E24269_01/doc.11120/e24478/toc.htm
That said, just like using UA, it is always better to take the extra time and not rely on such tools if they can be avoided. In most cases, the FMA will not be needed. This is especially true if your application is coming from version 10. For older versions, using FMA might be beneficial.
So, to the point, in order to move a Forms application (fmb, mmb, pll) from version 10 to 11 is as simply as recompiling your modules using the v11 compiler. That's it ;-)

Zoom technical documents in continues mode, Android

Hi,
I use reader a lot for technical documents. These documents have pages with text and very detailed schematics. So zoom is very important. I prefer to watch my documents in continues mode so that I can quickly go trough the pages. Lately I cannot do this anymore with the reader on Android. either I cannot zoom and have continues mpode. Or I need to zoom out every I have zoomed in to change a page. This does not work for me anymore. Is there a solution?
regards,
Robert

Few questions -
What version of Adobe Reader are you using?
Do you always see this issue with every file, or is it intermittent, or occurs with specific files?
What device and Android version are you using?

Upload technical documents?

SCN Team,
I have a couple How to Technical documents in WORD format and find out if I upload the document as is to BI Platform forum?
Is there a SCN standard Word template I need to use?
Must I convert the *.doc document to another format?
Also wanted to find what is correct area to post:
Blog area ?
Document ?
Please advise
Ajay

Hi Ajay
To add to Jurgen's comments, Google seems to be the main entry point of a lot of members to find SCN content. If you have the entire crux of your document in a Word document link it is unlikely to appear in the high up in search listing. Your content may not get as much visiblity.
I too find it frustrating that you have to download files and when I ask the person their excuse is they wanted to add pictures and could not copy/paste the image in the SCN document - not realising the insert image button is there for them to use.
The other benefit of writing directly in SCN is that you can save the draft - you can work anywhere at anytime with version control and publish when you are ready. You can also add a collaborator if you want someone else to contribute or review whilst you are working on the document.
The more I blog and learn about the SCN platform the more I am moving away from writing my draft in MS Word first.
As an aside, if they are 'How to' technical documents is there a chance the content belongs in a Wiki or help.sap as opposed to a document?
Regards
Colleen

Pages will no longer let me open files that I have previously downloaded, worked on and then saved on my mac. However it will let me open pages documents that I have started from new. I need the other documents to open and can't figure it out. PLEASE

Pages will no longer let me open files that I have previously downloaded, worked on and then saved on my mac. However it will let me open pages documents that I have started from new. I need the other documents to open and can't figure it out. PLEASE

I just got my mac a month ago so go easy on me but I was just working with the pages that was already on it, and then today I know it updated, and now I am unable to open a lot of my documents!:( Idk what you mean by the icloud version lol sorry! As for the version, when I open pages from my apps and click 'about' it says version 5.1? And when I open the document it just goes grey and kind of blinks and doesnt open? No error message or any indication of why it will not open now when I for sure have opened it in the past! Andddd for the OS X I think it is 10.9.1 ??

Can anyone tell me why I am unable to download a template word doc from webmail onto my mac without it opening in text format? I just need the original document format.

Can anyone tell me why I am unable to download a template word doc from webmail onto my mac without it opening in text format? I just need the original document format.

Where to begin... and why would you ask here? (workstation owners)
Places I can think to try, after google of course....
Forum devoted to something like Word / Mactopia or Pages.... whether you are using Office 2011, and no idea what browser or webmail (IMAP, Gmail, other)
And then there really are notebook with subforum for MacBook Pro
Apple Site Map
Apple Support Mail
Apple Support

I need vbeln(sales document no),vbeln1 (subsequent sd doc) in alv report.

I am using below structure for sd alv reports.
        BEGIN OF st_vbak,
          vbeln TYPE vbak-vbeln,
          erdat TYPE vbak-erdat,
        END OF st_vbak,
        BEGIN OF st_vbfa,
          vbelv TYPE vbfa-vbelv,
          vbeln1 TYPE vbfa-vbeln,
        END OF st_vbfa,
       BEGIN OF st_final,
         vbeln TYPE vbak-vbeln,
         erdat TYPE vbak-erdat,
         vbelv TYPE vbfa-vbelv,
         vbeln1 TYPE vbfa-vbeln,
        END OF st_final.
i need vbeln(sales document no), erdat, vbeln1 (subsequent sd doc) in report output..
i.e. By comparing vbeln -vbak and vbelv-vbfa ,it should show the result.
i need select and loop statemnt...
help plz..
Moderator Message: Stop dumping your Consulting work here without proper effort from your end. You have already been warned many times previously.
Edited by: kishan P on Mar 7, 2012 3:47 PM

Hi,
Please do some research on SDN. Also refer the PDF for SAP Tables Relation.
Regards,
Danish.

GR55 Report - Need to add Document type in selection parameter

Hi Friends,
Our client needs to have document type in selection parameter for one report group which has 4 reports attached.
Changes have been made and now document type is already there in selection parameter. But irrespective of document type Output is same.
That is if i Give docuement type or not it gives me same output.
This report is bein copies n new report is made.
Can any one help me out with how go proceed further.

Hi,
This report is bein copies n new report is made.
You just copied the output from an existing one right....
Inorder to get the report documenmt type wise you also need to change the output format of the report.
Ask your ABAPer to get this tobe done...

DMS BAPI_DOCUMENT_CREATE2 Class type Technical Document Category, object ty

Hello Experts!
The problem is that DMS import functionality stoped working after supp. pack implementation.
The process is based on BAPI_DOCUMENT_CREATE2 functionality.
The first problem was an error "The status set requires a previous status" which was causes dy note 1157678
(http://wiki.sdn.sap.com/wiki/display/PLM/Error-Thestatussetrequiresapreviousstatus)
After setting break point/de-implementing that note additional error appeared:
"Class type Technical Document Category, object ty"
Does anyone have idea what caused the problem, or which sap note did that? before SP19 implementation that error was not displayed.
Current highest support package is SAPKH60403.
Thanks in advance for help,
Rgds,
LB

Hi,
That error refers to updating characteristics for classification (addnl data tab in DIR).
Does anyone know what could cause the problem after support pack implementation?
Is it possible that bapi_document_create2 > api_document_maintain2 disables an option to update classification?

My phone has been changed under warranty by the apple store in germany. ı need a change document to register the phone in my country again. ımeı numbers of old and new must be in the document.you can send an mail in pdf format as soon as possible please.

my phone has been changed under warranty by the apple store in germany.
ı need a change document to register the phone in my country again.
ımeı numbers of old and new must be in the document.you can send an mail in pdf format
as soon as possible please.
your's respectfully.
new phone serial no:DQ******TC0
old phone serial no:DN*******T9Y
Product:
iPhone 4S
Serial Number:
DN*******T9Y
Service Requested:
December 3, 2012
Status:
Repair Complete
<Edited by Host>

No we cannot send it to you because we are users just like you and Apple does not monitor these forums.
But you can find the IMEI numbers yourself. Read the ENTIRE article:
http://support.apple.com/kb/HT4061

Need Middleware Technical Document.

Similar Messages

Maybe you are looking for