Need multiple Condition in Where Clause
Hi,
I have a table like below
CREATE TABLE LedgerTable (Particulars varchar(200),Debit decimal(18,3), Credit decimal(18,3), Category varchar(200));
INSERT into LedgerTable (Particulars, Debit, Credit, Category) values
('Asset', 0,80, 'Class'), ('CASH1', 0,100, 'Control'),('CASH2', 0,0, 'Control'),('Fittings', 20,0, 'Control'),('Furniture', 0,0, 'Control')
i have a flag @suppressZero.
If its 1 then need the result like below
i need to use @suppressZero in where condition
Thanks and Regards
Kasim
Hi Latheesh,
Thanks, but in my scenario i need to display record with category='Class' even if its 0 but not 'Control'
i changed this like below
elect * From LedgerTable Where (@suppressZero =1 and (Debit + Credit >0) or Category='Class') OR (@suppressZero=0)
anyway thanks again
Similar Messages
-
How can I pass multiple condition in where clause with the join table?
Hi:
I need to collect several inputs at run time, and query the record according to the input.
How can I pass multiple conditions in where clause with the join table?
Thanks in advance for any help.
Regards,
TDIf you are using SQL-Plus or Reports you can use lexical parameters like:
SELECT * FROM emp &condition;
When you run the query it will ask for value of condition and you can enter what every you want. Here is a really fun query:
SELECT &columns FROM &tables &condition;
But if you are using Forms. Then you have to change the condition by SET_BLOCK_PROPERTY.
Best of luck! -
Problem in case of or condition in where clause in case of leftouter joi.
hi
i am encountering a wierd problem.
in a select query if i have a left outer join and a or condition in where clause the order of condition in or matters and if i use a to_char problem is solved.
see query below
select * from custsupp left outer join Salesperson s on custsupp.sales_rep = s.id ,state a where (CS_FLAG='C' or CS_flag ='B') and custsupp.state = a.id
i have a single record in table custsupp with CS_FLAG ='B' the above does not return result. but if i move CS_FLAG='B' on left of or i.e
select * from custsupp left outer join Salesperson s on custsupp.sales_rep = s.id ,state a where (CS_FLAG='B' or CS_flag ='C') and custsupp.state = a.id
i get the rsult.
also if i remove left outer join and keep order of condition as it is i get result i.e
select * from custsupp ,state a where (CS_FLAG='C' or CS_flag ='B') and custsupp.state = a.id
also if i add a to_char to co,umns CS_FLAG i get the result.
select * from custsupp left outer join Salesperson s on custsupp.sales_rep = s.id ,state a where (to_char(CS_FLAG)='C' or to_char(CS_flag ='B')) and custsupp.state = a.id
why it is so?
CS_flag is of type nchar
Shreyas
Edited by: shreyasd on Jun 9, 2010 11:07 PMFirst if you don't want to take credit of the free sample then follow the below procedure:
1. Do the GRN for all the three item and for the free item in the excise tab at the item level select the material as non cenvatable. Just remember to add base value of the item
2. If you want to capture the Part1 entry then just do the normal transaction and while posting the excise with J1IEX just remove the excise duties for the free item.
3. For paying the vendor the excise amount, just do subsequent debit in the MIRO and in the details tab add in the unplanned delivery cost the amount that you want to pay for the excise duties
Second case if you want to take credit of the duties:
1. Do the Normal GRN process, add the base value and excise values for the free item.
2. Post the Excise duites with J1iEX.
3. The with the account entry you can settle the excise payment
Hope this will help you
Enjoyyyyyyyyyyy
Akshit -
Problem in adding one condition in where clause
Hi,
I am populating this internal table t_bkpf for all entries in gt_covp_ext
select bukrs belnr gjahr
bldat budat cpudt
xblnr waers awtyp awkey
from bkpf
into corresponding fields of table t_bkpf
for all entries in gt_covp_ext
where bukrs eq gt_covp_ext-bukrs and
awtyp eq 'MKPF'.
Here i have to add one more condition in where clause
AWKEY = ( Concatenated string of gt_covp_ext-REFBN + gt_covp_ext-REFGJ )
As i am not using loop at gt_covp_ext.How to implement this condition in Where clause.
Please help.If you did not understood the requirement reply this post.
Mukesh Kumar
Message was edited by:
mukesh kumarHi,
Create a new internal table gt_covp_ext_new with the same structure as gt_covp_ext. Include an extra field in gt_covp_ext_new-concat, to store the concatenated value.
Copy all entries from gt_covp_ext to gt_covp_ext_new.
Loop at gt_covp_ext.
move-corresponding gt_covp_ext to gt_covp_ext_new.
gt_covp_ext_new-concat = gt_covp_ext-REFBN + gt_covp_ext-REFGJ .
append gt_covp_ext_new.
endloop.
Now use this new internal table in the query.
select bukrs belnr gjahr
bldat budat cpudt
xblnr waers awtyp awkey
from bkpf
into corresponding fields of table t_bkpf
for all entries in gt_covp_ext_new
where bukrs eq gt_covp_ext_new-bukrs and
awkey eq gt_covp_ext_new-concat and
awtyp eq 'MKPF'.
Hope this answers your qn.
Regards,
Divya -
Using multiple dates in WHERE clause
I have a multiple select box in a form. I am trying to select
records in SQL using the list that this form field produces. They
are dateTime values. How do I use this list in the WHERE clause of
my select statement?Man, I really hate posting anywhere near Dan - I've been
watching his mastery for years. (Talk about the big leagues) But
here goes anyway...
I've gotten my little behind kicked by more than a view date
issues, and I have basically gotten away from exact matches (unless
you really need them).
I'd probably do something like this:
SELECT field1,field2...
WHERE datetime_column_in_db > (OR LTE,OR GT/LT)
'#datetimeformatyoulike(form.datetimevalue1)#
Basically, finding records in RELATION to the form's datetime
value has always been much easier for me.
And God (and Dan) have mercy on my soul... -
Dynamic page with multiple select in where clause
Hi,
I have a dynamic page and in the where-clause, i have a bind variable. In a report i use for instance
and rtrim((to_char(date_time5,'DAY'))) IN :v_day
That works ok in a report. But it does not work in a dynamic page.
what code is needed to work with a multiple select box on the customize screen for a dynamic page?
Thanks.Hi.
I have a dynamic page, with a bind variable :v_day. On the customization screen the user can select one or more days of the week, or all days. I use this also in a report and then it works ok. In the where clause i use:
and rtrim((to_char(date_time,'DAY'))) IN :v_day
Date_time is a tablecolumn (date).
When i add this line in the select script from the dynamic page, i get error:
: ORA-06550: line 1, column 2443:
PLS-00103: Encountered the symbol "" when expecting one of the following:
The symbol "(" was substituted for "" to continue.
ORA-06550: line 1, column 2606:
PLS-00103: Encountered the symbol ";" when expecting one of the following:
. ( ) , * @ % & - + / at mod rem <an exponent (**)> and or ||
The symbol ")" was substituted for ";" to continue.
ORA-06550: line 1, column 3236:
PLS-00103: Encountered the symbol "" when expecting one of the following:
The symbol (WWV-11230)
Critical Error in wwerr_api_error.get_errors! SQL Error Message: ORA-06502: PL/SQL: numeric or value error: character string buffer too small (WWV-)
Thanks. -
How to use the MAX DATE condition in WHERE CLAUSE FILEDS
Hi,
I am trying to fetch the result for getting maximun date but when i try to execute the query i am getting the error as follows.
CONDITION : trunc(max(RD.DATERECEIVED)) BETWEEN TO_DATE('01/08/2011','DD/MM/YYYY') AND TO_DATE('01/08/2011','DD/MM/YYYY')
ERROR: Group function is not allowed here.
CHEERS,
PRABU AMMAIAPPANI see a couple of problems here.
First, what you posted below is not a syntactically valid query. It seems to be part of a larger query, specifically, this looks to be only the GROUP BY clause of a query.
Prabu ammaiappan wrote:
Hi,
I Have a group function in the Query. Below is the Query i have used it,
GROUP BY S.FREIGHTCLASS,
R.CONTAINERKEY,
S.SKU,
S.DESCR ||S.DESCRIPTION2,
S.PVTYPE,
RD.LOTTABLE06,
R.WAREHOUSEREFERENCE,
RD.TOLOC,
R.ADDWHO,
R.TYPE,
S.CWFLAG,
S.STDNETWGT,
S.ORDERUOM,
R.ADDDATE,
C.DESCRIPTION,
(CASE WHEN P.POKEY LIKE '%PUR%' THEN 'NULL' ELSE to_char(P.PODATE,'dd/mm/yyyy') END),
NVL((CASE WHEN R.ADDWHO='BOOMI' THEN RDD.SUPPLIERNAME END),SS.COMPANY),
RDD.BRAND,
S.NAPA,
RD.RECEIPTKEY,
R.SUSR4,
P.POKEY,
RDD.SUSR1,
r.STATUS, DECODE(RDD.SUSR2,' ',0,'',0,RDD.SUSR2),
rd.SUSR3Second, the answer to your primary question, "How do I add a predicate with with a MAX() function to my where clause?" is that you don't. As you discovered, if you attempt to do so, you'll find it doesn't work. If you stop and think about how SQL is processed, it should make sense to you why the SQL is not valid.
If you want to apply a filter condition such as:
trunc(max(RD.DATERECEIVED)) BETWEEN TO_DATE('01/08/2011','DD/MM/YYYY') AND TO_DATE('01/08/2011','DD/MM/YYYY')you should do it in a HAVING clause, not a where clause:
select ....
from ....
where ....
group by ....
having max(some_date) between this_date and that_date;Hope that helps,
-Mark -
How to change operator of join conditions in where clause?
Hello
I have a situation... I want to change the operator between each join conditions in the where clause when these join conditions are not from the same join..
For example, I have the following schema:
Dim1 ------ DimA -------Fact1
Dim1-------DimB -----Fact1
So DimA and DimB are aliasas of one dim table, but the join is different.
Now if I run this model, what I will get in the where clause of the query is:
Where Dim1 = DimA and Dim1 = DimB and DimA= Fact1 and DimB = fact1.
Is there a way I can change these "and" operator to "OR", so that the where clause would look like this: Where Dim1 = DimA and Dim1 = DimB and DimA= Fact1 OR DimB = fact1?
This is different from simply changing the join operator within the same join, because these are different joins and I'd like to control how they relate to each other..
Please help
ThanksSometimes, business rules are complex, so there isn't always a way to simplify things. Is your issue that it's complex and error prone, or is it performance due to the OR clauses?
One possibility that will at least make it easier to test and debug is something like this: (pseudocode)
From Table1 Inner join Table2 on x=y etc.etc.
CROSS APPLY
(Select case when a=b and (c=d or e=f) then 1 else 0 end) as Situation1
, case when h=i or j = k then 1 else 0 end) as situation2
, case when l = m then 1 else 0 end) as situation 3
) as CA_Logic_Simplifier
Where situation1 = 1 and situation2 = 1 and situation3 = 1
Although you could say, "Hey, this is basically doing the same thing as before", this approach would be far easier to test and debug, because you can at a glance look at the values for situation1, 2, 3, etc. to see where errors are being introduced.
The cross apply makes the columns situation1/2/3 "instantiated", so they are usable in the where clause. Divide and conquer. -
EQUAL condition on WHERE clause not working
Hi,
Can someone please tell me why the following WHERE clause (marked with ***** below) is not finding any EQUAL conditions?
I know that table i_cust_mast is populated with several thousand rows and that there ARE matching rows in KNVP.
Here is the code as I have it:
TYPES:
BEGIN OF t_cust_mast,
kunnr TYPE kunnr,
name1 TYPE name1_gp,
name2 TYPE name2_gp,
stras TYPE stras_gp,
adrnr TYPE adrnr,
ort01 TYPE ort01_gp,
regio TYPE regio,
pstlz TYPE pstlz,
vkbur TYPE vkbur,
konda TYPE konda,
sortl TYPE sortl,
katr1 TYPE katr1,
katr2 TYPE katr2,
katr3 TYPE katr3,
katr4 TYPE katr4,
katr5 TYPE katr5,
katr6 TYPE katr6,
katr7 TYPE katr7,
katr8 TYPE katr8,
katr9 TYPE katr9,
katr10 TYPE katr10,
bzirk TYPE bzirk,
vkgrp TYPE vkgrp,
kdgrp TYPE kdgrp,
klabc TYPE klabc,
kondaa TYPE konda,
kalks TYPE kalks,
pltyp TYPE pltyp,
hityp TYPE hityp_kh,
hkunnr TYPE hkunnr_kh,
datab TYPE datab,
datbi TYPE datbi,
lzone TYPE lzone,
parvw TYPE parvw,
kunn2 TYPE kunn2,
kunn2a TYPE kunn2,
kunn2b TYPE kunn2,
kunn2c TYPE kunn2,
kunn2d TYPE kunn2,
kunn2e TYPE kunn2,
kunn2f TYPE kunn2,
kunn2g TYPE kunn2,
parza TYPE parza,
ktokd TYPE ktokd,
loevm TYPE loevm_x,
END OF t_cust_mast .
TYPES:
BEGIN OF t_part_func,
kunnr TYPE kunnr,
parvw type parvw,
kunn2 TYPE kunn2,
parza type parza,
END OF t_part_func .
TYPES:
t_t_cust_mast TYPE STANDARD TABLE OF t_cust_mast,
t_t_part_func TYPE STANDARD TABLE OF t_part_func.
DATA: i_cust_mast TYPE t_t_cust_mast,
i_part_func TYPE t_t_part_func.
CONSTANTS: c_type_a TYPE msgty VALUE 'A'.
FIELD-SYMBOLS: <x_cm> LIKE LINE OF i_cust_mast.
Get Customer Master Data
SELECT
hkunnr hname1 hname2 hstras hadrnr hort01 h~regio
hpstlz ivkbur ikonda hsortl hkatr1 hkatr2 h~katr3
hkatr4 hkatr5 hkatr6 hkatr7 hkatr8 hkatr9 h~katr10
ibzirk ivkgrp ikdgrp iklabc ikonda ikalks i~pltyp
khityp khkunnr kdatab kdatbi h~lzone
hktokd hloevm
INTO TABLE i_cust_mast " up to 50 rows
FROM kna1 AS h
JOIN knvv AS i ON ikunnr = hkunnr
JOIN knvh AS k ON hityp = c_type_a " 'A'
AND kkunnr = ikunnr
AND kvkorg = ivkorg
AND kvtweg = ivtweg
AND kspart = ispart
AND k~datab <= sy-datum
AND k~datbi >= sy-datum.
IF sy-subrc = 0.
SORT i_cust_mast[] BY kunnr.
ENDIF.
Get Partner Function Data for each Customer Master Record
LOOP AT i_cust_mast ASSIGNING <x_cm>.
SELECT hkunnr hparvw hkunn2 hparza
INTO TABLE i_part_func
FROM knvp AS h
WHERE h~kunnr = <x_cm>-kunnr. ***** WHERE clause not finding any matches *****
ENDLOOP.
Thanks!!!
AndyTYPES:
BEGIN OF t_cust_mast,
kunnr TYPE kunnr,
name1 TYPE name1_gp,
name2 TYPE name2_gp,
stras TYPE stras_gp,
adrnr TYPE adrnr,
ort01 TYPE ort01_gp,
regio TYPE regio,
pstlz TYPE pstlz,
vkbur TYPE vkbur,
konda TYPE konda,
sortl TYPE sortl,
katr1 TYPE katr1,
katr2 TYPE katr2,
katr3 TYPE katr3,
katr4 TYPE katr4,
katr5 TYPE katr5,
katr6 TYPE katr6,
katr7 TYPE katr7,
katr8 TYPE katr8,
katr9 TYPE katr9,
katr10 TYPE katr10,
bzirk TYPE bzirk,
vkgrp TYPE vkgrp,
kdgrp TYPE kdgrp,
klabc TYPE klabc,
kondaa TYPE konda,
kalks TYPE kalks,
pltyp TYPE pltyp,
hityp TYPE hityp_kh,
hkunnr TYPE hkunnr_kh,
datab TYPE datab,
datbi TYPE datbi,
lzone TYPE lzone,
parvw TYPE parvw,
kunn2 TYPE kunn2,
kunn2a TYPE kunn2,
kunn2b TYPE kunn2,
kunn2c TYPE kunn2,
kunn2d TYPE kunn2,
kunn2e TYPE kunn2,
kunn2f TYPE kunn2,
kunn2g TYPE kunn2,
parza TYPE parza,
ktokd TYPE ktokd,
loevm TYPE loevm_x,
END OF t_cust_mast .
TYPES:
BEGIN OF t_part_func,
kunnr TYPE kunnr,
parvw type parvw,
kunn2 TYPE kunn2,
parza type parza,
END OF t_part_func .
TYPES:
t_t_cust_mast TYPE STANDARD TABLE OF t_cust_mast,
t_t_part_func TYPE STANDARD TABLE OF t_part_func.
DATA: i_cust_mast TYPE t_t_cust_mast,
i_part_func TYPE t_t_part_func.
CONSTANTS: c_type_a TYPE msgty VALUE 'A'.
FIELD-SYMBOLS: <x_cm> LIKE LINE OF i_cust_mast.
Get Customer Master Data
SELECT
hkunnr hname1 hname2 hstras hadrnr hort01 h~regio
hpstlz ivkbur ikonda hsortl hkatr1 hkatr2 h~katr3
hkatr4 hkatr5 hkatr6 hkatr7 hkatr8 hkatr9 h~katr10
ibzirk ivkgrp ikdgrp iklabc ikonda ikalks i~pltyp
khityp khkunnr kdatab kdatbi h~lzone
hktokd hloevm
INTO TABLE i_cust_mast " up to 50 rows
FROM kna1 AS h
JOIN knvv AS i ON ikunnr = hkunnr
JOIN knvh AS k ON hityp = c_type_a " 'A'
AND kkunnr = ikunnr
AND kvkorg = ivkorg
AND kvtweg = ivtweg
AND kspart = ispart
AND k~datab <= sy-datum
AND k~datbi >= sy-datum.
IF sy-subrc = 0.
SORT i_cust_mast[] BY kunnr.
ENDIF.
Get Partner Function Data for each Customer Master Record
LOOP AT i_cust_mast ASSIGNING <x_cm>.
SELECT hkunnr hparvw hkunn2 hparza
INTO TABLE i_part_func
FROM knvp AS h
WHERE h~kunnr = <x_cm>-kunnr.
ENDLOOP. -
Retrieve List Items based on condition in Where Clause
Hello Experts,
I am trying to retrieve list items from a list (CityList) which contains 2 columns one is city(string) and State(Lookup) based on Lookup value, but i am getting all city names.
here is my query below.
function MainFunction() {
var lookupid = 5;
var myQueryString = "<Where><Eq><FieldRef Name='State' LookupId='true' /><Value Type='Lookup'>"+lookupid+"</Value></Eq></Where>";
var myContext = new SP.ClientContext.get_current(); ;
var myWeb = myContext.get_web();
var myList = myWeb.get_lists().getByTitle("CityList");
var myQuery = new SP.CamlQuery();
myQuery.set_viewXml(myQueryString);
myItems = myList.getItems(myQuery);
myContext.load(myItems, 'Include(Title)');
myContext.executeQueryAsync(Function.createDelegate(this, GetListDataSuccess), Function.createDelegate(
this, GetListDataFail));
function GetListDataFail(sender, args) {
// Show error message
alert('GetListDataFail() failed:' + args.get_message());
function GetListDataSuccess(sender, args) {
var currListItemCount = myItems.get_count();
var currItemEnumerator = myItems.getEnumerator();
var currItemDetails = '';
while (currItemEnumerator.moveNext()) {
var currItem = currItemEnumerator.get_current();
currItemDetails = currItemDetails + ';' + currItem.get_item("Title");
// Show details
alert(currItemDetails);
Please suggest where i am wrong.
Thank you
sarojYou need to enclose the <Where> tag inside <View><Query> . Try like below
var myQueryString = "<View><Query><Where><Eq><FieldRef Name='State' LookupId='TRUE' />
<Value Type='Lookup'>"+lookupid+"</Value></Eq></Where></Query></View>";
Geetanjali Arora | My blogs | -
Case condition in where clause
Hi
I'm a SQL beginner but according to my reading of the manual, this syntax should be acceptable. I'm using it in application express but tested it also in SQL developer and finding that it fails with an "invalid relational operator" error, with the line number pointing to the ELSE clause of the CASE condition, but a column number pointing to white space.
This is a nested select but that shouldn't matter. The fragment in question is this:
select some columns
from res
where res.villaid = :P605_VILLAID
and INSTR(:P604_RES_STATES, res.states) != 0
and (CASE :P604_EXCLUDE_ZERO
WHEN 'Y' THEN 'res.rate > 0'
ELSE 'res.rate >= 0'
END)
and res.DEPARTDATE > :P605_STARTDATE
and res.ARRIVEDATE <= :P605_ENDDATE,
I hope this formats ok when posted. The code is looking for reservations in a date range (which works fine when the other conditions are commented out), and should only output zero-rate rows (complimentary nights) if the user asks for this in the P604_EXCLUDE_ZERO bind variable. There are probably other ways to go about this, but I am too stubborn to give up on this. Well, not yet anyway.
Thanks and regards
CSselect some columns
from res
where res.villaid = :p605_villaid
and instr (:p604_res_states, res.states) != 0
and sign (res.rate) >= case when :p604_exclude_zero = 'Y' then 1 else 0 end
and res.departdate > :p605_startdate
and res.arrivedate <= :p605_enddate -
Multiple values in where clause(IN) of select query in Cisco Cloud Portal using single field
I can actually pass multiple values in the IN statement of select query using multiple dictionary fields in the data retrieval rule of the AFC in Cisco cloud portal like
#dictionary.field1# = 1 and
#dictionary.field2#=2
select col1,col2 from table1 where col3 in (#dictionary.field1#,dictionary.field2#).
but I want to pass mutiple values in a single field as
#dictionary.field1#=1,2
select col1,col2 from table1 where col3 in (#dictionary.field1#) and the query gives no data because it is taking as '1,2' instead of '1','2'.
Please give the solution for passing multiple values in a single variable to use in IN operator of WHERE clauseOk, I now understand what you are trying to do. Unfortunately, you cannot inject parts of a SQL statement into a DDR through a dictionary field, which always represents a specific value (the comma in your case is attempting injection of a SQL construct to refer to multiple values). One possible solution is to arbitrarily consolidate your list of values using a delimiter that you know will not be in the values themselves such as a colon (:). Let's use 3 values as it serves as a better example.
Set your dictionary field to a single reference to all 3 values of interest, say 'a', 'b', 'c' as:
:a:b:c: (you can use javascript to create this consolidated dictionary field)
Now your query would look something like the following:
select col1,col2 from table1 where #dictionary.field1t# like '%:'+col3+':%'
This should achieve the desired result. -
Please help to build an sql from the given expression to build case condition with Where clause
if @rollno is not null then
Select top 1 studentid from student where rollno =:@rollno
else
if @regno is not null then
Select top 1 studentid from student where regno =:@regno
Please help me to create the above condition as a single sql statement . I will pass two argument in to the sql.
With Thanks
Pol
polachanSelect top 1 studentid from student
where (rollno =:@rollno or :@rollno is null)
and (regno =:@regno or :@regno is null)
The above expression will work in SQL server
I'm not sure you're using sql server as syntax like :@regno are not t-sql valid
so you can try the above and if it doesnt work please try in the relevant forums for more help in case you're using a different RDBMS
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page -
How to use maximum date condition in where clause ?
Hi I want to check if SWITCH_FLAG has 'Y' for the latest batch run..how can write it?
(select a.SWITCH_FLAG
from MORTGAGE
where SYS_EFF_DATE = max(SYS_EFF_DATE)
) as expected_result
Error message:
ORA-00934: group function is not allowed hereThis will give you the switch_flag for the latest eff_date,
SELECT SWITCH_FLAG
FROM (SELECT A.SWITCH_FLAG, ROW_NUMBER () OVER (ORDER BY SYS_EFF_DATE DESC) rn
FROM mortgage A)
WHERE rn = 1;
--if you want to test try this,
SELECT SWITCH_FLAG,SYS_EFF_DATE
FROM (SELECT A.SWITCH_FLAG,SYS_EFF_DATE , ROW_NUMBER () OVER (ORDER BY SYS_EFF_DATE DESC) rn
FROM mortgage A)
WHERE rn = 1;G. -
Where clause in SELECT INTO statement
Hi,
I am using multiple conditions in where clause for my SELECT INTO statement as follows.
SELECT count(DTLA.LOCATION_ID)
INTO LOCATION_ID_count
FROM DOC2_MGR.DOC_TYPE_LOB_ASSOC DTLA
WHERE (DTLA.DOC_TYPE_ID = 'XYZ' AND DTLA.lob_code = 'ABC');
It considers only first condition and returns the result i.e. DTLA.DOC_TYPE_ID = 'XYZ' only.
Does select into statement suppose to consider only one condition in where clause???
Thanks in advance!
--SandeepI got it resolved. Here is list of things I noted
1. I was using variable names same as column names. It was mixing up temp variable names with column name on the table, which doesn't make sense as I was referring column names in table.column format
2. I had mixed few datatypes. Input param was suppose to be number where as I was passing it as Text
Thanks anyway!
--Sandeep
Maybe you are looking for
-
Wireless Router reset. Iphones will no longer connect to Wifi. Help?
My wife recently reset our wireless router and now both our iphones won't connect to the WIFI? As I look into Settings it looks like it's continuously trying to connect to our network. However it never connects......
-
Unable to boot mac OS X Lion after windows 7 installation using boot camp!
Hi, I'm first time mac user & recently bought the latest entry level mac mini model 2.3GHz 599$ (http://www.apple.com/macmini/specs.html). The machine by default came with OS X Lion. I was trying to install genuine windows 7 on my mac mini using boot
-
Just received a replacement ipad2 and I'm having trouble syncing it with my pc. I started my iPad as new instead of using the restoring option, is there any way I can get my old apps, songs etc restored on my replacement iPad?
-
My Secure Empty Transh does not work, How can I fix it?
When I open Trash, it displays all the files that are there to be deleted. However, when I select from Actions the Secure Empty Transh, the computer launches the application to empty trash, it asks me if I want to delete unlocked items or all items.
-
How to write parent member (TOTAL) to basemember?
Hi experts! This code doesn't work. Why? Task is - write "TOTAL" member to another member. *XDIM_MEMBERSET CATEGORY=ACTUAL *XDIM_MEMBERSET MEASURES=PERIODIC *XDIM_MEMBERSET RPTCURRENCY=USD //KBO1000000 is parent node,ZCX1000000 is basemember *XDIM_ME