Need order status and tracking number please

Long story short, I need an accurate order status and an actual UPS tracking number for my order please.
Lenovo phone support has been unavailable since yesterday, and I've spent over 12 hours on hold on the webchat so far.
I ordered a Yoga 2 Pro on Feb 5th.  On Feb 11th I received a shipping notice that my order had shipped on Feb 10th.  The tracking number provided is a 10-digit UPS reference number that I cannot find on the website (even when searching by reference number).
On Feb 12th, the online order status page changed to indicate that my order was delivered on Feb 11th.  This is not the case, as I have yet to receive my order.
Can someone from Lenovo staff please help?
Solved!
Go to Solution.

Well, I have received my laptop in the meantime, despite not having a tracking number.

Similar Messages

  • Relation between Maintenance Order No. and Operation Number

    Hi all,
    I have to make a module pool in which i want to display the following field
    Order No.                                               
    Operation no. | Operation Description |
    Now my problem is that i m not getting the tables from which i have to select data basically i want to extract the data on the basis of Maintenance Order No. and Operation Number.
    I have checked the following tables
    AFKO , AFVu , AFVC, CAUFV.
    But i m not able to find any relation between Maintenance Order No. and Operation Number.
    Please help!!!
    Thanks and regards,
    Rachit khanna

    Hello Rachit,
    The relation is as follows
    AFKO-AUFPL (Routing number is Order header)
    Use this routing number to get operations from AFVC
    AFVC-VORNR gives operation number
    AFVC-LTXA1 gives operation description
    For sub-operations, VORNR will be sub-operation number, and AFVC-SUMNR for this sub-operation corresponds to the respective superior operation(refers to AFVC-APLZL).
    AFVC-APLZL is a unique number for each operation.
    Hope this helps. You can check with some existing/new orders as well.
    let me know if you need anything about split operations as well.
    Best Regards,
    Subhakanth

  • From where does  Purchase Order picking the Tracking number.

    Hi Experts,
    Can some one tell me, from where the Tracking number is picking in Purchase Order transaction.
    Is there any specific settings to check.
    I Have created one PO, In Item level I can see tracking number *******. could any one of you tell me  where does the system pick the tracking number from?
    Thank You.

    I Can not see the default value button anywhere.
    I need to get the Tracking number in PO.
    However when I am trying with different vendor with Pur. Org I am able to get the Tracking number in the PO but I am unable to get the Tracking number with other Vendor and Purch. org combination.
    Is there any specific settings to exist the tracking number.
    Thank You.

  • QA33 Change by adding Requisitioner, purchasing group and tracking number

    Hi All
    I have a requirement for the Standard report like QA33. The requirement is that, in the output of QA33,
    The Requisitioner, Purchasing group and Tracking Number should be displayed
    Please give me suggestions to do this
    I searched for User Exits and I found QEVA0004, QEVA0005, QEVA0006, QEVA0007, QEVA0008, QEVA0009, QEVA0010, QLCO0001, QSS10001.
    In the Above which exits I can use and how to implement them
    Pls reply
    Thnx in Advance
    Regards
    P KAMAL

    GSK,
    But for stock components you don't need a Purch.Group...
    Have a look at the following user-exits:
    COZF0001: Change purchase req. for externally processed operation
    COZF0002: Change purchase req. for externally procured component
    PeteA

  • Status and Tracking

    Can anyone explain me the use of Status and Tracking in Integrated Planning
    I read few help.sap links but cannot get a clear picture of when and how it is needed during the project.
    Any help is appreciated!

    In order to use status and tracking, even with BW IP,  you do need to create a simple planning area in the transaction BPS0, even if you are using integrated planning.  A planning area is simply a BPS connection to a infocube. This creates the connection for integrated planning to use the cube. However, no further customization in BPS0 is then needed (i.e. there is no need to create variables, character relationships, or any other specifications on any of the further planning area tabs.)
    Instruction on how to create a planning area are shown here:
    [http://help.sap.com/saphelp_nw70/helpdata/en/44/21de357641648fe10000000a1553f7/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/44/21de357641648fe10000000a1553f7/frameset.htm]
    Yes, it is a bit of a throw back, but it is a very quick step.
    As for the hierarchy used for status and tracking, there are very specific rules governing the hierarchy used for STS. 
    (1) It must have a single text node as its root,
    (2) below the text node it must have a single infoobject node that all other infoObject nodes roll up to. 
    (3) Also, the hierarchy must only contain the base infoObject of the hierarchy (no other infoObjects)
    (4) and it can not contain link nodes.
    I believe that this is the basic structure is modeled off of the employee hierarchy from ECC.   Since the planning in status in tracking is done by employee, the status and tracking hierarchy is a hierarchy of  approvals, not data views (the data view hierarchies can be shown in your Integrated Planning queries).
    Hopefully this answers the above questions!

  • Changing Look and Feel - BPS status and tracking system

    HI,
    I 'd like to know if there is a way to customize the web page that appears when you launch the transaction BPS_STS_START (Starts BPS Status and Tracking System). I believe that it's an automatically generated page, that takes from somewhere an html template. Is there a way to change that html template?
    For example, how could I insert a logo, insert titles, change fonts, etc.
    I 'll appreciate if somebody send me some related documentation.
    Thanks in advance.
    Cristian.

    Hi Christian,
    the STS is a BSP-Application(have a look at TA SE80).
    You can copy this BSP to your own customer-namespace(YTUNGUSKA) and you can change all pages and views you would like. You can integrate other stylesheets, logos or you can modify the logic of events triggered by buttons and so on. Please note: If you copy the TUNGUSKA you cannot use anymore the TA BPS_STS_START cause it only will start the BSP TUNKUSKA(its hardcoded), build up your own transaction.
    Hope it helps
    Bye Gil

  • Session Out Error in Status and Tracking System (BPS) Execution

    Hi,
    I am getting the Session timed out error in Status and Tracking System (Open Planning). The reason I found is:
    In STS (Configuratioin) the web link that I have added is valid for one time. Meaning that ever time I visit Web Interface Builder (Execution), it is generating a different web link. Therefore, it is only valid for a single time.
    Is there any way, that I can make the web string that is generated every time I visit Web Interface Builder (Execution) for a particular report, so that I can use that web link in the configuration of STS (Open Planning). In this case the web link every time that generated is dynamic.
    But, this is not the case with Open Report. I prepared a query and attached the web link of the query into (Open Report). The number of times even if I open the report, there is no issue as the web link is static.
    Any inputs on this will be appreciated.
    Regards,
    Ravi

    Hi,
    This has been solved.
    In STS Configuration the web link (URL) that is to be inserted is not the web link that has dynamically generated. However, it is the web link (URL) on the Web Interface Builder (WIB) - Property - URL BSP Application.
    If you use this URL in the STS (Open Report), this will ask the User for User ID and Password to reach that Web Planning Layout and a dynamic code will then be generated. Every time, user visits it generates new dynamic URL.
    Anyway, Thanks in advance.
    Regards,
    Ravi

  • Status and Tracking Problem

    dear all,
    Trying to implement status and tracking for the planning application we have made.
    In our planning application there is Material on which planning is done.
    For 0MATERIAL , i myself have created an heirarchy.While creating an heirarchy i created a text node 'ZNODE1'.Under that i inserted a Material node Dummy material.Under that i inserted three material nodes: M1,M2,M3.
    Now there are 4 persons: A,B,C and D.
    'A' responsible for all the three materials.That is he will be approving the plan data by 'B', 'C' and 'D'.
    'B' responsible for M1, 'C' for M2 and 'D' for M3.
    Now when 'A' logs in he should be able to see the plans of all the three whereas when 'B','C' or 'D' logs in he should be able to see only the layout for which he is responsible.
    I created a subplan , planning session and assigned heirarchy name for material.What i expect is the display should be based on the user who is logging in.But in my case whoever is the user he is able to see all the layouts.
    How could i restrict the layouts based on the user login ?
    Please suggest.
    Thanks in advance.
    regards,
    Yogesh

    Hi,
    Go through this link
    Determining Date, Person Responsible, Layouts
    http://help.sap.com/saphelp_nw04/helpdata/en/9e/8000f48b1511d5b3ee0050dadfb23f/content.htm
    Authorization Objects in the STS
    http://help.sap.com/saphelp_nw04/helpdata/en/26/fe7b4070ebd462e10000000a155106/content.htm
    Regards-
    Siddhu
    Message was edited by: sidhartha

  • Status and Tracking and Additonal Information

    I am trying to change the Additional Information text available in Detail Page of Planning in Status and Tracking. By default I see the text available under UPS_START_RUNDE description.
    I tried to create custom text based on documentation available for Maintaining Text with Additional Information, but with no success. Also documentation does not specify it needs to be assigned based on reason code in table UPS_CUSTTEXT.  So not sure how to change this default text.
    Any ideas?
    Thanks,
    Sachin

    I could able to resolve this issue myself, I missed assigning my newly created text objcet in STS configuration setting: Determine Attributes in Planning Session -> Text Element (assigned by own text object created)
    Thanks,
    Sachin

  • Status and Tracking system (STS) with BI Integrated Planning ?

    Hi, is posible get some images or demo for show my clients ?
    i am reading Salp Help
    http://help.sap.com/saphelp_nw04s/helpdata/en/b6/92bc7479fb11d5b3df0050dadfb23f/frameset.htm
    and say :
    You can use the BW-BPS Status and Tracking system (STS) with BI Integrated Planning. This is useful if you are already using BW-BPS with the Status and Tracking system but want to use additional functions from BI Integrated Planning.
    What is additional functions from BI Integrated Planning ?
    Is posible write free text in some areas for planning and option for look from high levels ?
    Is posible Insert in the proces STS to <b>"Area Manager"</b> only for look status the Planning (open, in process or finishing) ?
    General manager --> Lock when is finishing.
    <b>Area manager</b>--> only look status the Planning ?
    Submanager of area --> Responsable, Aproval, etc.
    planning1
    planning2
    planning3
    planning4
    planning5
    Submanager of area : Planning TOO.
    Thank you ... This is important info and get some images the last version in STS working in web mode, for my client buy the product.

    Hi Bala ,
    Yes you can use the STS for BI IP also and you need to configure the Planning level and sub plan area and follow the steps to set up STS.
    STS still has BPS flavour and can be used in IP.
    Hope this helps
    Raja

  • Status and Tracking customizing + BI Integrated Planning

    Hi,
    I am trying to set up a Status and Tracking (STS) solution for our Integrated planning application. I understand this might be somewhat cumbersome, as STS is created for BPS - but still SAP has said it should work for BI-IP aswell.
    I see I have to make use of Planning Areas. Even though we are using BI-IP, I quickly created a plan.area i BPS0 based on one of our real-time cubes. My problem appears in the 3rd "step" of the STS customizing where I am to "Determine a hierarchy for Subplan".
    I get the error: "Error when reading the hierarchy" after filling out the fields... Any ideas?? Does it have to be a BPS-type hierarchy. There is nothing wrong with our hierarchy (as we use it for planning and reporting etc), so I cannot understand the error.
    Any ideas?
    Thanks,
    Jon Anders
    PS. Feel free to share any other issues or thoughts about using STS with BI-IP.

    Hi,
    we're using a multi-characteristic hierarchy for STS for our cost center planning. Our STS hierarchy has then one root text node, a misc business unit node below (that's your single characteristic node), a range of profit centers under that and finally the cost centers.
    Actual Planning is only done on the cost centers, but since we derive the profit center from the cost center, a profit center leader can lock planning for all subordinate cost centers by locking his profit center if the cc/pc association written to the cube matches the STS hierarchy.
    In the case of your profit center hierarchy, you'd probably have the root text node, then some bogus profit center you don't do any planning on, and underneath all remaining profit centers. Instead of the first profit center you could probably also use the controlling area as a characteristic (how many do you have?)
    Bear in mind that any characteristic you have in the hierarchy needs to appear in the planning area and hence in the infocube.
    Does this help? Regards,
    Tilman

  • Status and Tracking System Authorization Objects

    Hello,
    I'm having questions on how to create roles for users to access the Status and Tracking System.
    I've assigned the following Authorization Objects to my user
    R_STS_PT
    Activity: 16 Execute
    Subplan: *
    Planning sequence: *
    R_STS_CUST
    Activity: 16 Execute
    R_STS_SUP
    Activity: 16 Execute
    And still when i try to execute STS (T-Code: BPS_STS_START) or Customize (T-Code: BPS_TC) i get an error saying "Without Authorization for the transaction BPS_STS_START" and "Without Authorization for the transaction BPS_TC"!
    Can anyone help me, please! Waht am i missing?
    Thanks

    Hello Stephen
    Thank you very much for the help.
    Still i have some other questions that you or someone can help me.
    By now, my Planning Coordinator can already access to BPS_TC, and my Planning Responsible access to BPS_STS_START.
    The "normal" users must onle have the Authorization Object R_STS_PT.
    I still have this issue that i'm not getting at.
    I have created a user where i've assigned total access to Execute STS and Customizing.
    Assigned the 2 transactions BPS_TC and BPS_STS_START and gave them the Auth. Objects R_STS_SUP and R_STS_CUST.
    Issue: When my user tries to "Define Subplan" and "Define Planning Session" i get this error:
    "No maintenance authorization for requested data
    Message no. SV052
    Diagnosis
    You have attempted, in change mode, to access data for which you have no authorization."
    Can anyone help me on this please.
    Thanks
    Vitor

  • BPS Status and Tracking System

    Hi,
    I am trying to configure the status and tracking system in BW BPS. Can somebody please let me know if there is any documentation on STS?
    Regards,
    Daya

    HI
    Check these links
    http://help.sap.com/saphelp_nw04/helpdata/en/b6/92bc7479fb11d5b3df0050dadfb23f/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/0f/969340a966b80ee10000000a155106/frameset.htm
    Documents in STS
    http://help.sap.com/saphelp_nw04/helpdata/en/0f/969340a966b80ee10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/26/fe7b4070ebd462e10000000a155106/content.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20use%20sap%20gui%20planning%20folders%20with%20the%20status%20and%20tracking%20system.doc
    Regards
    N Ganesh

  • Report on production order status and shortage report

    I want to know standard report on production order status and shortage report. Kindly suggest.

    COOIS - Production order information system . In this report you can give system status in selection screen  and in report you can get complete status details (both system and user status) .
    shortage report - CO24

  • Present Status button  is unusable  in Status and Tracking System

    Hi everybody:
      In Status and Tracking System  the   Present Status is unusable. It involved  set for processing ,send for approval and retrieve .  They are all unusable. They are not  locked, but are gray !
      why ??
       thanks!

    What sort of user is this for? If a Super user, press the Edit button first.
    If another user, or this action does not enable the buttons, probably another user is blocking. Click on the 'status' link to check.
    Sephen

Maybe you are looking for