Need possible reason for the error!!!

The following error occured on a QA machine while testing....when clicked on a lable a dialog should come up which contains a table with data.
I am not able to reproduce this error on developmenet machines....So i need the possible reason the occurance of this error..
java.lang.NullPointerException
at javax.swing.plaf.basic.BasicTableUI.registerKeyboardAction(BasicTableUI.java, Compiled Code)
at javax.swing.plaf.basic.BasicTableUI.registerKey(BasicTableUI.java, Compiled Code)
at javax.swing.plaf.basic.BasicTableUI.registerKey(BasicTableUI.java, Compiled Code)
at javax.swing.plaf.basic.BasicTableUI.installKeyboardAction(BasicTableUI.java:616)
at javax.swing.plaf.basic.BasicTableUI.installUI(BasicTableUI.java:497)
at javax.swing.JComponent.setUI(JComponent.java, Compiled Code)
at javax.swing.JTable.setUI(JTable.java:2081)
at javax.swing.JTable.updateUI(JTable.java:2134)
at ASMSFrame.UserDialog.setTable(UserDialog.java:264)
thanks

Line number 264 of UserDialog.java is throwing a NullPointerException. You are probably calling a method on an object that does not exist.

Similar Messages

One possible reason for the spinning beachball with versions 10.0.2 trying to play/see anything

Hi there.
I discovered today what is the reason for the strange problem I've been having with FCP X from 10.0.2+. The problem was that I just couldn't use it: I couldn't see any media in the canvas/preview pane, no matter if it was video, jpgs, psds, whatever. Trying to use or reproduce a project was just more of the same: a spinning beachball forever. At some point, from time to time, the black from the preview pane changes to a checkboard, but that was all.
This happened in 10.0.3, 10.0.4 and 10.0.5.
I tried everything, removing the events, projects, and so on. The only thing that worked was to create a new user in my machine and use FCPX there. Everything seems to work fine there. I did that yesterday at 3am. Today I saw that the colors were off in that user, and I remembered that the calibration is not setup at the system level, but for each user, so went on to change the profile to use the one I did for my screen (I have my screens calibrated frequently). Voilá, now FCPX doesn't work anymore on the new user. The only change was the profile, so I went to System Preferences, selected the old (default) profile, and now FCPX works fine.
I don't know if the problem is my profile (I created it with ColorEyes DisplayPro, I don't have anything else right now to try to create a new one) or if the issue is with FCPX itself, as I have only had problems with FCPX related to the profile. In any case, the issue is now identified in my case, and even if I don't like to work in a non-calibrated screen, that will have to do for now.
I will try some other calibration software and see if the results are the same, but I thought of sharing my findings here in case someone is still having this issue.
Tomorrow that the 5770 arrives for my Mac Pro 1,1 I'll try to run it, also with the calibrated screen, and see what happens.
HTH,
Rodrigo

I'm sorry, but I'm not sure what you mean with "the profile is downstream from ColorSync"?
I'm willing to accept that there is something wrong with the way ColorEyes DisplayPro is making the profile, although if the OS loads it and uses it and doesn't complain at all - nor any other app I use - I don't see why FCP should have issues with it. But I'm willing to try some other app to create the profile for the screen and will do as soon as I can get my hands on some other.
Between lines, hopefully I'm wrong, but I read you are telling me that FCP doesn't support having a "typical" monitor calibration, usual in printing/photography/etc workflows, but only supports calibrated output through broadcast monitors, using third party hardware? And that in the Color screen settings I must not use any "user generated" screen profile?

Possible reason for the iMac G5 with 10.4.3 Sleep Problems

Ok first off let me say that I got this new iMac G5 20" about 4 days ago. It's wonderful. If anyone out there is holding out for the intel machines, don't wait, get a G5. It's a fantastic machine. Now on to the meat of the subject. The story goes like this; I hooked up my Plextor PVR with eyeTV to my iMac to see how well it would do (been using it with a P4 Windoze XP machine and my iBook G4 14" with no problems). It worked just great. No problems with the iMac, the PVR or any of my other addons (including the boatload of software I migrated over from the iBook). So I set up EyeTV to record some stuff while I was asleep. It's supposed to wake up the Mac, record the shows then the Mac goes back to sleep. Easy huh? Well the wakeup, record part went just fine but the Mac wouldn't go back to sleep. Perplexed (actually thrilled, this is where I have my most fun with new machines, figuring out why they aren't working correctly) I did all the standard "I can't get my Mac to sleep automatically" things. You know, blow away all the plist files that have anything to do with powermanagement and autowake, reset NVRAM from OF, reset the PRAM (3 times just like the old days), reset the SMU, blow away all the Bluetooth plist files, etc, etc. Did them all, don't suggest any, I did them all I swear, really. I've been through this kind of thing before. One big difference with this iMac. Nothing and I mean nothing would work to fix the problem. The only way the bad boy would sleep is by hitting the Power button for a second or selecting "Sleep" from the Apple menu. Hmmmm. Spent the better part of a morning reading every thread here about peoples problems like mine. One post and I mean exactly one had something I hadn't tried. I rebooted the Mac in Safe Mode (hold the shift key down while it boots until you get the login screen with the red text "Safe Mode".) I forgot that OSX even did that. Logged in as myself (normal login but still in safe mode) and low and behold the thing would sleep automatically! I repeated this (boot in normal mode, boot in safe mode) many times. Every single time the Mac would sleep from safe mode but not from normal mode. Tells me it's software not hardware. In each mode I run "Activity Monitor" and save a list of the running processes to a text file. Now compare them and shutdown each process that is different one at a time. To make this story somewhat shorter (heh) I finally found that I could consistantly make the machine sleep or not sleep by killing the "mdimport" process and restarting it. This has to do with Spotlight. To be exact, it's the process that imports Metadata into Spotlights data list (I'm no expert, have a basic understanding of this). So on a hunch I ran the terminal and entered the command to delete then rebuild Spotlights databases, "mdutil -E /". Then I let Spotlight rebuild that databases and rebooted. Guess what? The iMac sleeps perfectly now, go figure. I did this once so far and the Mac has been working correctly now for about 5 hours. I've got a feeling that the problem will come back. Especially if it's an inherent problem in Spotlight and the 10.4.3 upgrade. I don't seem to have this problem with 10.4 or earlier. Long post I know but I thought it could help someone out. Please post any comments. I'd like to know if what I did is coincidence (I really don't think so since I reproduced it many times) or not.
-joe-
iBook G4 1Gig, iMac G5 2.1 Gig, iMac 266 Mac OS X (10.4.3) iMac 266 running 10.3.6, been using Macs since the '80s

Right guy's i to have researched this problem
concerning my auto sleep problem.I started off by
following Joeaux's original post by safe
booting,noting what was running in the activity
monitor,booting normaly and again noting what was
running now.I eliminated the same processes that were
running from both boots, and then started quiting one
by one, the extra processes, from the normal boot, in
activity monitor.Once you quit a process, allow the
computer to try to go to sleep i.e set energy saver
to 1minute and wait to see what happens.I tried the "
mdimport"as of Joeaux but this was not my problem.In
my case the sleep problem was down to two
applications called N67U_ButtonManager and
N124U_ButtonManager.These are for use with my Canon
scanner.I also noted that if i left the scanner
connected to the computer this would also stop it
going to sleep,even after deleting the two
applications.Hope this helps!
Thank you now i know that those login items are for my scanner, and not logic audio i am a little less angry(Logic is now an apple application but the version I run was from the emagic days and i presumed that the button managers were from this app as it was the oldest bit of software running on my machine) By the way any apps that may cause a problem like this are more than likely simply residing in your user login items and can be disabled from there permanently as far as i can see.

Possible reasons for error 1074396005 invalid avi session

Dear All,
I am working on creating and writing frames on to AVI files. I need to start writing frames up on record on command and close the AVI file up on record stop command. I am trying to read frames from an recorded video and write in to another AVI file.
But i am observing Error 1074396005 invalid avi session, whenever i run the code. I am using AVI2 VI's (IMAQ AVI2 Create, AVI2 Write and AVI2 close).
I am using LabVIEW 2013 SP1 and Vision development module versions.
Below is the block diagram for reading an avi file and writing in to avi file upon record on command (numeric control value 1 to case selector)
Block diagram for record off
Below is the error observed:
Kindly suggest what would be the possible reason for the error.
With regards,
Sri
Attachments:
Block diagram1.PNG ‏59 KB
avi2 error2.png ‏381 KB
Block diagram2.PNG ‏20 KB

Might be good if you can post the code instead of screenshots.
-If session was closed or aborted due to some reason you should get this error.
-Multiple times you are creating the session inside the loop with same avi session, is it required?
-Are the images added to the avi file?
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

Reason for the loads fail

Hi
What are the possible reasons (Not the Errors) which cause the data load failure..??
Regars

Can be multiple...
Few of them....
1. If the exchange rates, factory calendors are not maintained...
2. If the characteristics contain invalid characters
3. If already a failed request exists
4. If the datasource has changed and you havent replicated
5. If the maximum runtime of the request is reached (if the load takes lot of time)
6. If there are any routines which cause the load to fail... Something like divide by 0
Its not an exhaustive list...

I cannot log into facebook. I get the following message: 404 Error - Not Found The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request,

I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.com

I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

What could be the reason for this error file

Hi,
What could be reason for this error file, the content of the error file is :
Compiling INSERT-PROCEDURE trigger on IOTDISPUTE_FILES data block...
No compilation errors.
Compiling UPDATE-PROCEDURE trigger on IOTDISPUTE_FILES data block...
No compilation errors.
Compiling DELETE-PROCEDURE trigger on IOTDISPUTE_FILES data block...
No compilation errors.
Compiling LOCK-PROCEDURE trigger on IOTDISPUTE_FILES data block...
No compilation errors.
Compiling INSERT-PROCEDURE trigger on IOTDISPUTEDETAILS data block...
No compilation errors.
Compiling UPDATE-PROCEDURE trigger on IOTDISPUTEDETAILS data block...
No compilation errors.
Compiling DELETE-PROCEDURE trigger on IOTDISPUTEDETAILS data block...
No compilation errors.
Compiling LOCK-PROCEDURE trigger on IOTDISPUTEDETAILS data block...
No compilation errors.
Created form file X:\IOT\IOT_SupportingSystem\Forms\IOTRAP.fmx
I am getting this error while compiling a form with DML sources are Database Procedure.
Thanks in advance.
Rizly

Hi,
Sorry for the delayed response. These informations are generated in the FormName.err file. If its not the error, then why its not generating for other forms. As I mentioned earlier, this fom has DML sources by the Database Procedures, that could be the reason ?, this is my first project in Forms.
The content of the IOTRAP.err file:
Compiling DELETE-PROCEDURE trigger on IOTDISPUTEDETAILS data block...
No compilation errors.
Compiling LOCK-PROCEDURE trigger on IOTDISPUTEDETAILS data block...
No compilation errors.
Created form file X:\IOT\IOT_SupportingSystem\Forms\IOTRAP.fmx
Thanks in advance.
Rizly

ANY BODY TELL ME WHAT IS THE REASON FOR THIS ERROR

hi... experts....
Iam having one screen in my previous module pool program....and now as per my requirement i added on e new field...
for that...
1. i declared one variable in top include...
2. cretaed one more new block with help of box in layout screen..
3. added some text field and inputput out field...
4. and in that block i also added one line with test like... following...
" NOTE: PLEASE ENTER THE ..... VALUE..." Like this.... just for to give direction...
so these are the steps i taken to add new field to my screen... but here i am geting error ... while entering the value in that field and press any push button.... including back in that screen... like....
"INVAILD FIELD FORMAT (SCREEN ERROR)"
.... ANY BODY TELL ME WHAT IS THE REASON FOR THIS ERROR... COMMONLY???
THANK YOU,,,
NAVEEN..

hi naveen,
there can be problem from ur layout side.
Goto SE51. in Layout editor make sure that the type in screen and in TOP Include is same.
and if you are using currency field than it can also give error to you.
if still you any error .
give me type of variable whcih you defined in TOP and also code.
give reward if helpfull.

What is the reason for this error, in printing

HI,
when I print the label, in the system log it showing this error message.
character converter active when first problem occurred**** Any one explain me what could be the reason for this error.
Thanks and Regards,
Surya

Hi Surya,
Check out
http://www.sapfans.com/forums/viewtopic.php?t=247433&sid=ea0c61e87af526fe4c83fe256efe0721

What could be the possible reason for a deployed application to run slow after the target pc comes out of standby mode?

What could be the possible reason for a deployed application to run slow after the target pc comes out of standby mode? PC running XP and using the USB to communicate with the DAQ and driver boards. Application generated with 2010.
Thanks

Hello,
Usually default property is checked
system property -> devices ->usb root -> power management -> allow system to switch off device
Hope this help
Regards
Tinnitus
CLAD / Labview 2011, Win Xp
Mission d'une semaine- à plusieurs mois laissez moi un MP...
RP et Midi-pyrénées .Km+++ si possibilité de télétravail
Kudos always accepted / Les petits clicks jaunes sont toujours appréciés
Don't forget to valid a good answer / pensez à valider une réponse correcte

Can't create new pdfs from powerpoint; either form within Adobe or within powerpoint. I could do this yesterday and today it won't work for some reason. The error says "an unexpected error occurred. PDFMaker was unable to produce the Adobe PDF. How do

Can't create new pdfs from powerpoint; either form within Adobe or within powerpoint. I could do this yesterday and today it won't work for some reason. The error says "an unexpected error occurred. PDFMaker was unable to produce the Adobe PDF. How do I fix this?

Is there a log file in the document folder indicating what the problem was. There are a number of reasons that PDF creation may fail. You can try to print to the Adobe PDF printer to see if there is any indication in that process. The processing is different, but the same problems may show up with both processes.

TS2180 Need a resolution for multiplexor error during burns?

Need a solution for Multiplexor Errors during iDVD disc burning process?

Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev. (Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

How to Maintain Reasons for the Opportunity Status in SPRO

Dear all,
I want to maintain reasons for the opportunity status. could any of you educate me about this. Your help will be highly rewarded.
thank you
Raghu ram

hi Raja ram,
u can maintain status reasons for Opportunity SPRO
CRM-TransactionsSettings for Opportunity--Maintain Status Reason and Status Profile for Opportunities
in this u need to select cataloge type (O1) in this u can maintain reasons for status
Regards
sreedhar

Possible reasons for a repository manager not displayed under KM Content

Hi,
I developed a repository manager and deployed the par file Archive uploader.
Most time after deployment, I can see immediately an instance of the repository manager under KM Content. However, sometimes, when I made some changes to the code, it doesn't appear under KM Content. The deployment log in SYS/global/config/cm/reports shows no error.
I tried to find some log in System Administration - Monitor, but found nothing.
So, could anyone tell me:
1. What might be the reason for the problem that the repository manager cannot display under KM Content after deploying the par?
2. Where can I find the log explaining why my repository manager cannot display?
Thanks,
Ray

Hi Ray,
Deploying a repository manager means a hot KM deployment, which isn't supported at all, see https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb1f18be-0801-0010-ffa0-e3495f7401bc and SAP note 894884. After such a deployment, the KM is restarted, but you have some kind of "shadow KM" in memory, which leads for most things to an unpredictable behaviour.
In contrast to the documents reffered to above, also the standard KM delivery from SAP still behaves in an uncontrolled way for many issues.
That's why after a KM hot deployment, you should restart your server if you realize anything "unusual". A workaround is to debug your code and using the hot code replacement feature (which only works in some situations, but that's better than nothing...).
Hope it helps
Detlev

ESS- Leave : You are not one of the possible agent for the task ws9021212?

Hi ,
I have copied the standard workflow template wa12300111 and assigned the new template in the customizing. When i apply leave from ESS working time , it says an error " You are not one of the possible agent for the task ws9021212? " .
The similar kind of Error i have solved before in by making the workflow as GENERAL TASK in PFTC as follows.
PFTC -> Choose "Workflow Template" from the drop down -> Enter the workflow template id "ws9021212" in the text box -> now click on "change" button -> Now goto the menu addional data -> agent assignment -> maintain -> select the task text -> and set it as general task.
i have cleared the buffer also!
BUT STILL I AM GETTING THE ERROR ?
Please help me !
Richard A

hi Richard
Try to do this way. IN the workflow builder there is a button with hat. that is basic data. click on that and it will go to another screen and u can find a apple button that is agent assignment for a task click that.
It will open maintain agent assignment screen. click the text below that and click the attribute button and click the genral task. i think this will solve ur issue.
If helpful kindly reward points
Regards
vijay

Need possible reason for the error!!!

Similar Messages

Maybe you are looking for